mirror of
https://github.com/esphome/esphome.git
synced 2024-11-25 08:28:12 +01:00
835079ad43
* Add AC Dimmer support Fixes https://github.com/esphome/feature-requests/issues/278 * fixes basically missed the output pin setup and in the switching was switching true true true :P * Format * Enable ESP32 * Also setup ZC pin * Support multiple dimmers sharing ZC pin * Fix ESP32 * Lint * off gate on zc detect * tests pins validation * Climate Mitsubishi (#725) * add climate * Mitsubishi updates * refactor mitsubishi to use climate_ir * lint * fix: only decode when not str already (#923) Signed-off-by: wilmardo <info@wilmardenouden.nl> * fix climate-ir bad merge (#935) * fix climate-ir bad merge * add mitshubishi test * http_request: fix memory allocation (#916) * http_request version fix (#917) * PID Climate (#885) * PID Climate * Add sensor for debugging PID output value * Add dump_config, use percent * Add more observable values * Update * Set target temperature * Add autotuner * Add algorithm explanation * Add autotuner action, update controller * Add simulator * Format * Change defaults * Updates * Use b''.decode() instead of str(b'') (#941) Handling of request arguments in WizardRequestHandler is not decoding bytes and rather just doing a str conversion resulting in a value of "b''" being supplied to the wizard code. * Adding the espressif 2.6.3 (#944) * extract and use current version of python 3 (#938) * Inverted output in neopixelbus (#895) * Added inverted output * Added support for inverted output in neopixelbus * Update esphome/components/neopixelbus/light.py Co-Authored-By: Otto Winter <otto@otto-winter.com> * Update light.py * corrected lint errors Co-authored-by: Otto Winter <otto@otto-winter.com> * Added degree symbol for MAX7219 7-segment display. (#764) The ascii char to use it is "~" (0x7E). Disclaimer: I didn't test this yet. * Fix dump/tx of 64 bit codes (#940) * Fix dump/tx of 64 bit codes * fixed source format * Update hdc1080.cpp (#887) * Update hdc1080.cpp increase waittime, to fix reading errors * Fix: Update HDC1080.cpp i fixed the my change on write_bytes * add tcl112 support for dry, fan and swing (#939) * Fix SGP30 incorrect baseline reading/writing (#936) * Split the SGP30 baseline into 2 values - According to the SGP30 datasheet, each eCO2 and TVOC baseline is a 2-byte value (MSB first) - The current implementation ignores the MSB of each of the value - Update the schema to allow 2 different baseline values (optional, but both need to be specified for the baseline to apply) * Make both eCO2 and TVOC required if the optional baseline is defined * Make dump_config() looks better * Add register_*_effect to allow registering custom effects (#947) This allows to register custom effect from user components, allowing for bigger composability of source. * Bugfix/normalize core comparisons (and Python 3 update fixes) (#952) * Correct implementation of comparisons to be Pythonic If a comparison cannot be made return NotImplemented, this allows the Python interpreter to try other comparisons (eg __ieq__) and either return False (in the case of __eq__) or raise a TypeError exception (eg in the case of __lt__). * Python 3 updates * Add a more helpful message in exception if platform is not defined * Added a basic pre-commit check * Add transmit pioneer (#922) * Added pioneer_protocol to support transmit_pioneer * Display tm1637 (#946) * add TM1637 support * Support a further variant of Xiaomi CGG1 (#930) * Daikin climate ir component (#964) * Daikin ARC43XXX IR remote controller support * Format and lint fixes * Check temperature values against allowed min/max * fix tm1637 missing __init__.py (#975) * Add AC Dimmer support Fixes https://github.com/esphome/feature-requests/issues/278 * fixes basically missed the output pin setup and in the switching was switching true true true :P * Format * Enable ESP32 * Also setup ZC pin * Support multiple dimmers sharing ZC pin * Fix ESP32 * Lint * off gate on zc detect * tests pins validation * fix esp8266 many dimmers, changed timing * Increased value resolution, added min power * use min_power from base class * fix min_power. add init with half cycle * added method for trailing pulse, trailing and leading * fix method name. try filter invalid falling pulse * renamed to ac_dimmer * fix ESP32 not configuring zero cross twice Co-authored-by: Guillermo Ruffino <glm.net@gmail.com> Co-authored-by: Wilmar den Ouden <wilmardo@users.noreply.github.com> Co-authored-by: Nikolay Vasilchuk <Anonym.tsk@gmail.com> Co-authored-by: Tim Savage <tim@savage.company> Co-authored-by: Vc <37367415+Valcob@users.noreply.github.com> Co-authored-by: gitolicious <mrjchn@gmail.com> Co-authored-by: voibit <krestean@gmail.com> Co-authored-by: Luar Roji <cyberplant@users.noreply.github.com> Co-authored-by: András Bíró <1202136+andrasbiro@users.noreply.github.com> Co-authored-by: dmkif <dmkif@users.noreply.github.com> Co-authored-by: Panuruj Khambanonda (PK) <pk@panurujk.com> Co-authored-by: Kamil Trzciński <ayufan@ayufan.eu> Co-authored-by: Keith Burzinski <kbx81x@gmail.com> Co-authored-by: Mario <4376789+mario-tux@users.noreply.github.com> Co-authored-by: Héctor Giménez <hector.fwbz@gmail.com>
719 lines
15 KiB
YAML
719 lines
15 KiB
YAML
esphome:
|
|
name: $devicename
|
|
comment: $devicecomment
|
|
platform: ESP8266
|
|
board: d1_mini
|
|
build_path: build/test3
|
|
on_boot:
|
|
- wait_until:
|
|
- api.connected
|
|
- wifi.connected
|
|
includes:
|
|
- custom.h
|
|
|
|
substitutions:
|
|
devicename: test3
|
|
devicecomment: test3 device
|
|
|
|
api:
|
|
port: 8000
|
|
password: 'pwd'
|
|
reboot_timeout: 0min
|
|
services:
|
|
- service: hello_world
|
|
variables:
|
|
name: string
|
|
then:
|
|
- logger.log:
|
|
format: 'Hello World %s!'
|
|
args:
|
|
- name.c_str()
|
|
- service: empty_service
|
|
then:
|
|
- logger.log: 'Service Called'
|
|
- service: all_types
|
|
variables:
|
|
bool_: bool
|
|
int_: int
|
|
float_: float
|
|
string_: string
|
|
then:
|
|
- logger.log: 'Something happened'
|
|
- stepper.set_target:
|
|
id: my_stepper2
|
|
target: !lambda 'return int_;'
|
|
- service: array_types
|
|
variables:
|
|
bool_arr: bool[]
|
|
int_arr: int[]
|
|
float_arr: float[]
|
|
string_arr: string[]
|
|
then:
|
|
- logger.log:
|
|
format: 'Bool: %s (%u), Int: %d (%u), Float: %f (%u), String: %s (%u)'
|
|
args:
|
|
- YESNO(bool_arr[0])
|
|
- bool_arr.size()
|
|
- int_arr[0]
|
|
- int_arr.size()
|
|
- float_arr[0]
|
|
- float_arr.size()
|
|
- string_arr[0].c_str()
|
|
- string_arr.size()
|
|
- service: dfplayer_next
|
|
then:
|
|
- dfplayer.play_next:
|
|
- service: dfplayer_previous
|
|
then:
|
|
- dfplayer.play_previous:
|
|
- service: dfplayer_play
|
|
variables:
|
|
file: int
|
|
then:
|
|
- dfplayer.play: !lambda 'return file;'
|
|
- service: dfplayer_play_loop
|
|
variables:
|
|
file: int
|
|
loop_: bool
|
|
then:
|
|
- dfplayer.play:
|
|
file: !lambda 'return file;'
|
|
loop: !lambda 'return loop_;'
|
|
- service: dfplayer_play_folder
|
|
variables:
|
|
folder: int
|
|
file: int
|
|
then:
|
|
- dfplayer.play_folder:
|
|
folder: !lambda 'return folder;'
|
|
file: !lambda 'return file;'
|
|
|
|
- service: dfplayer_play_loo_folder
|
|
variables:
|
|
folder: int
|
|
then:
|
|
- dfplayer.play_folder:
|
|
folder: !lambda 'return folder;'
|
|
loop: True
|
|
|
|
- service: dfplayer_set_device
|
|
variables:
|
|
device: int
|
|
then:
|
|
- dfplayer.set_device:
|
|
device: TF_CARD
|
|
|
|
- service: dfplayer_set_volume
|
|
variables:
|
|
volume: int
|
|
then:
|
|
- dfplayer.set_volume: !lambda 'return volume;'
|
|
- service: dfplayer_set_eq
|
|
variables:
|
|
preset: int
|
|
then:
|
|
- dfplayer.set_eq: !lambda 'return static_cast<dfplayer::EqPreset>(preset);'
|
|
|
|
- service: dfplayer_sleep
|
|
then:
|
|
- dfplayer.sleep
|
|
|
|
- service: dfplayer_reset
|
|
then:
|
|
- dfplayer.reset
|
|
|
|
- service: dfplayer_start
|
|
then:
|
|
- dfplayer.start
|
|
|
|
- service: dfplayer_pause
|
|
then:
|
|
- dfplayer.pause
|
|
|
|
- service: dfplayer_stop
|
|
then:
|
|
- dfplayer.stop
|
|
|
|
- service: dfplayer_random
|
|
then:
|
|
- dfplayer.random
|
|
|
|
- service: battery_level_percent
|
|
variables:
|
|
level_percent: int
|
|
then:
|
|
- tm1651.set_level_percent:
|
|
id: tm1651_battery
|
|
level_percent: !lambda 'return level_percent;'
|
|
- service: battery_level
|
|
variables:
|
|
level: int
|
|
then:
|
|
- tm1651.set_level:
|
|
id: tm1651_battery
|
|
level: !lambda 'return level;'
|
|
- service: battery_brightness
|
|
variables:
|
|
brightness: int
|
|
then:
|
|
- tm1651.set_brightness:
|
|
id: tm1651_battery
|
|
brightness: !lambda 'return brightness;'
|
|
- service: battery_turn_on
|
|
then:
|
|
- tm1651.turn_on:
|
|
id: tm1651_battery
|
|
- service: battery_turn_on
|
|
then:
|
|
- tm1651.turn_off:
|
|
id: tm1651_battery
|
|
|
|
wifi:
|
|
ssid: 'MySSID'
|
|
password: 'password1'
|
|
|
|
i2c:
|
|
sda: 4
|
|
scl: 5
|
|
scan: False
|
|
|
|
spi:
|
|
clk_pin: GPIO12
|
|
mosi_pin: GPIO13
|
|
miso_pin: GPIO14
|
|
|
|
uart:
|
|
tx_pin: GPIO1
|
|
rx_pin: GPIO3
|
|
baud_rate: 115200
|
|
|
|
ota:
|
|
safe_mode: True
|
|
port: 3286
|
|
|
|
logger:
|
|
hardware_uart: UART1
|
|
level: DEBUG
|
|
esp8266_store_log_strings_in_flash: false
|
|
|
|
web_server:
|
|
|
|
deep_sleep:
|
|
run_duration: 20s
|
|
sleep_duration: 50s
|
|
|
|
sensor:
|
|
- platform: apds9960
|
|
type: proximity
|
|
name: APDS9960 Proximity
|
|
- platform: apds9960
|
|
type: clear
|
|
name: APDS9960 Clear
|
|
- platform: apds9960
|
|
type: red
|
|
name: APDS9960 Red
|
|
- platform: apds9960
|
|
type: green
|
|
name: APDS9960 Green
|
|
- platform: apds9960
|
|
type: blue
|
|
name: APDS9960 Blue
|
|
- platform: homeassistant
|
|
entity_id: sensor.hello_world
|
|
id: ha_hello_world
|
|
- platform: aht10
|
|
temperature:
|
|
name: "Temperature"
|
|
humidity:
|
|
name: "Humidity"
|
|
- platform: am2320
|
|
temperature:
|
|
name: "Temperature"
|
|
humidity:
|
|
name: "Humidity"
|
|
- platform: adc
|
|
pin: VCC
|
|
id: my_sensor
|
|
filters:
|
|
- offset: 5.0
|
|
- multiply: 2.0
|
|
- filter_out: NAN
|
|
- sliding_window_moving_average:
|
|
- exponential_moving_average:
|
|
- lambda: 'return 0;'
|
|
- delta: 100
|
|
- throttle: 100ms
|
|
- debounce: 500s
|
|
- calibrate_linear:
|
|
- 0 -> 0
|
|
- 100 -> 100
|
|
- calibrate_polynomial:
|
|
degree: 3
|
|
datapoints:
|
|
- 0 -> 0
|
|
- 100 -> 200
|
|
- 400 -> 500
|
|
- -50 -> -1000
|
|
- -100 -> -10000
|
|
- platform: resistance
|
|
sensor: my_sensor
|
|
configuration: DOWNSTREAM
|
|
resistor: 10kΩ
|
|
reference_voltage: 3.3V
|
|
name: Resistance
|
|
id: resist
|
|
- platform: ntc
|
|
sensor: resist
|
|
name: NTC Sensor
|
|
calibration:
|
|
b_constant: 3950
|
|
reference_resistance: 10k
|
|
reference_temperature: 25°C
|
|
- platform: ntc
|
|
sensor: resist
|
|
name: NTC Sensor2
|
|
calibration:
|
|
- 10.0kOhm -> 25°C
|
|
- 27.219kOhm -> 0°C
|
|
- 14.674kOhm -> 15°C
|
|
- platform: ct_clamp
|
|
sensor: my_sensor
|
|
name: CT Clamp
|
|
sample_duration: 500ms
|
|
update_interval: 5s
|
|
|
|
- platform: tcs34725
|
|
red_channel:
|
|
name: Red Channel
|
|
green_channel:
|
|
name: Green Channel
|
|
blue_channel:
|
|
name: Blue Channel
|
|
clear_channel:
|
|
name: Clear Channel
|
|
illuminance:
|
|
name: Illuminance
|
|
color_temperature:
|
|
name: Color Temperature
|
|
integration_time: 700ms
|
|
gain: 60x
|
|
- platform: custom
|
|
lambda: |-
|
|
auto s = new CustomSensor();
|
|
App.register_component(s);
|
|
return {s};
|
|
sensors:
|
|
- id: custom_sensor
|
|
name: Custom Sensor
|
|
- platform: binary_sensor_map
|
|
name: Binary Sensor Map
|
|
type: group
|
|
channels:
|
|
- binary_sensor: bin1
|
|
value: 10.0
|
|
- binary_sensor: bin2
|
|
value: 15.0
|
|
- binary_sensor: bin3
|
|
value: 100.0
|
|
- platform: ade7953
|
|
voltage:
|
|
name: ADE7953 Voltage
|
|
current_a:
|
|
name: ADE7953 Current A
|
|
current_b:
|
|
name: ADE7953 Current B
|
|
active_power_a:
|
|
name: ADE7953 Active Power A
|
|
active_power_b:
|
|
name: ADE7953 Active Power B
|
|
- platform: pzem004t
|
|
voltage:
|
|
name: "PZEM00T Voltage"
|
|
current:
|
|
name: "PZEM004T Current"
|
|
power:
|
|
name: "PZEM004T Power"
|
|
- platform: pzemac
|
|
voltage:
|
|
name: "PZEMAC Voltage"
|
|
current:
|
|
name: "PZEMAC Current"
|
|
power:
|
|
name: "PZEMAC Power"
|
|
energy:
|
|
name: "PZEMAC Energy"
|
|
frequency:
|
|
name: "PZEMAC Frequency"
|
|
power_factor:
|
|
name: "PZEMAC Power Factor"
|
|
- platform: pzemdc
|
|
voltage:
|
|
name: "PZEMDC Voltage"
|
|
current:
|
|
name: "PZEMDC Current"
|
|
power:
|
|
name: "PZEMDC Power"
|
|
- platform: hm3301
|
|
pm_1_0:
|
|
name: "PM1.0"
|
|
pm_2_5:
|
|
name: "PM2.5"
|
|
pm_10_0:
|
|
name: "PM10.0"
|
|
|
|
time:
|
|
- platform: homeassistant
|
|
|
|
apds9960:
|
|
address: 0x20
|
|
update_interval: 60s
|
|
|
|
mpr121:
|
|
id: mpr121_first
|
|
address: 0x5A
|
|
|
|
binary_sensor:
|
|
- platform: apds9960
|
|
direction: up
|
|
name: APDS9960 Up
|
|
device_class: motion
|
|
filters:
|
|
- invert
|
|
- delayed_on: 20ms
|
|
- delayed_off: 20ms
|
|
- lambda: 'return false;'
|
|
on_state:
|
|
- logger.log: New state
|
|
id: my_binary_sensor
|
|
- platform: apds9960
|
|
direction: down
|
|
name: APDS9960 Down
|
|
- platform: apds9960
|
|
direction: left
|
|
name: APDS9960 Left
|
|
- platform: apds9960
|
|
direction: right
|
|
name: APDS9960 Right
|
|
- platform: homeassistant
|
|
entity_id: binary_sensor.hello_world
|
|
id: ha_hello_world_binary
|
|
- platform: mpr121
|
|
id: touchkey0
|
|
channel: 0
|
|
name: "touchkey0"
|
|
- platform: mpr121
|
|
channel: 1
|
|
name: "touchkey1"
|
|
id: bin1
|
|
- platform: mpr121
|
|
channel: 2
|
|
name: "touchkey2"
|
|
id: bin2
|
|
- platform: mpr121
|
|
channel: 3
|
|
name: "touchkey3"
|
|
id: bin3
|
|
on_press:
|
|
then:
|
|
- switch.toggle: mpr121_toggle
|
|
- platform: ttp229_lsf
|
|
channel: 1
|
|
name: TTP229 LSF Test
|
|
- platform: ttp229_bsf
|
|
channel: 1
|
|
name: TTP229 BSF Test
|
|
- platform: custom
|
|
lambda: |-
|
|
auto s = new CustomBinarySensor();
|
|
App.register_component(s);
|
|
return {s};
|
|
binary_sensors:
|
|
- id: custom_binary_sensor
|
|
name: Custom Binary Sensor
|
|
|
|
globals:
|
|
- id: my_global_string
|
|
type: std::string
|
|
initial_value: '""'
|
|
|
|
remote_receiver:
|
|
pin: GPIO12
|
|
dump: []
|
|
|
|
status_led:
|
|
pin: GPIO2
|
|
|
|
text_sensor:
|
|
- platform: version
|
|
name: "ESPHome Version"
|
|
icon: mdi:icon
|
|
id: version_sensor
|
|
on_value:
|
|
- lambda: !lambda |-
|
|
ESP_LOGD("main", "The state is %s=%s", x.c_str(), id(version_sensor).state.c_str());
|
|
- script.execute: my_script
|
|
- script.wait: my_script
|
|
- script.stop: my_script
|
|
- homeassistant.service:
|
|
service: notify.html5
|
|
data:
|
|
title: New Humidity
|
|
data_template:
|
|
message: The humidity is {{ my_variable }}%.
|
|
variables:
|
|
my_variable: |-
|
|
return id(version_sensor).state;
|
|
- platform: template
|
|
name: "Template Text Sensor"
|
|
lambda: |-
|
|
return {"Hello World"};
|
|
- platform: homeassistant
|
|
entity_id: sensor.hello_world2
|
|
id: ha_hello_world2
|
|
- platform: custom
|
|
lambda: |-
|
|
auto s = new CustomTextSensor();
|
|
App.register_component(s);
|
|
return {s};
|
|
text_sensors:
|
|
- id: custom_text_sensor
|
|
name: Custom Text Sensor
|
|
|
|
script:
|
|
- id: my_script
|
|
then:
|
|
- lambda: 'ESP_LOGD("main", "Hello World!");'
|
|
|
|
switch:
|
|
- platform: template
|
|
name: "mpr121_toggle"
|
|
id: mpr121_toggle
|
|
optimistic: True
|
|
- platform: gpio
|
|
id: gpio_switch1
|
|
pin:
|
|
mcp23017: mcp23017_hub
|
|
number: 0
|
|
mode: OUTPUT
|
|
interlock: &interlock [gpio_switch1, gpio_switch2, gpio_switch3]
|
|
- platform: gpio
|
|
id: gpio_switch2
|
|
pin:
|
|
mcp23008: mcp23008_hub
|
|
number: 0
|
|
mode: OUTPUT
|
|
interlock: *interlock
|
|
- platform: gpio
|
|
id: gpio_switch3
|
|
pin: GPIO1
|
|
interlock: *interlock
|
|
- platform: custom
|
|
lambda: |-
|
|
auto s = new CustomSwitch();
|
|
return {s};
|
|
switches:
|
|
- id: custom_switch
|
|
name: Custom Switch
|
|
|
|
custom_component:
|
|
lambda: |-
|
|
auto s = new CustomComponent();
|
|
s->set_update_interval(15000);
|
|
return {s};
|
|
|
|
stepper:
|
|
- platform: uln2003
|
|
id: my_stepper
|
|
pin_a: GPIO12
|
|
pin_b: GPIO13
|
|
pin_c: GPIO14
|
|
pin_d: GPIO15
|
|
sleep_when_done: no
|
|
step_mode: HALF_STEP
|
|
max_speed: 250 steps/s
|
|
acceleration: inf
|
|
deceleration: inf
|
|
- platform: a4988
|
|
id: my_stepper2
|
|
step_pin: GPIO1
|
|
dir_pin: GPIO2
|
|
max_speed: 0.1 steps/s
|
|
acceleration: 10 steps/s^2
|
|
deceleration: 10 steps/s^2
|
|
|
|
interval:
|
|
interval: 5s
|
|
then:
|
|
- logger.log: "Interval Run"
|
|
- stepper.set_target:
|
|
id: my_stepper2
|
|
target: 500
|
|
- stepper.set_target:
|
|
id: my_stepper
|
|
target: !lambda 'return 0;'
|
|
- stepper.report_position:
|
|
id: my_stepper2
|
|
position: 0
|
|
- stepper.report_position:
|
|
id: my_stepper
|
|
position: !lambda 'return 50/100.0;'
|
|
|
|
climate:
|
|
- platform: bang_bang
|
|
name: Bang Bang Climate
|
|
sensor: ha_hello_world
|
|
default_target_temperature_low: 18°C
|
|
default_target_temperature_high: 24°C
|
|
idle_action:
|
|
- switch.turn_on: gpio_switch1
|
|
cool_action:
|
|
- switch.turn_on: gpio_switch2
|
|
heat_action:
|
|
- switch.turn_on: gpio_switch1
|
|
away_config:
|
|
default_target_temperature_low: 16°C
|
|
default_target_temperature_high: 20°C
|
|
|
|
cover:
|
|
- platform: endstop
|
|
name: Endstop Cover
|
|
stop_action:
|
|
- switch.turn_on: gpio_switch1
|
|
open_endstop: my_binary_sensor
|
|
open_action:
|
|
- switch.turn_on: gpio_switch1
|
|
open_duration: 5min
|
|
close_endstop: my_binary_sensor
|
|
close_action:
|
|
- switch.turn_on: gpio_switch2
|
|
- output.set_level:
|
|
id: out
|
|
level: 50%
|
|
- output.esp8266_pwm.set_frequency:
|
|
id: out
|
|
frequency: 500.0Hz
|
|
- output.esp8266_pwm.set_frequency:
|
|
id: out
|
|
frequency: !lambda 'return 500.0;'
|
|
- servo.write:
|
|
id: my_servo
|
|
level: -100%
|
|
- servo.write:
|
|
id: my_servo
|
|
level: !lambda 'return -1.0;'
|
|
- delay: 2s
|
|
- servo.detach: my_servo
|
|
close_duration: 4.5min
|
|
max_duration: 10min
|
|
- platform: time_based
|
|
name: Time Based Cover
|
|
stop_action:
|
|
- switch.turn_on: gpio_switch1
|
|
open_action:
|
|
- switch.turn_on: gpio_switch1
|
|
open_duration: 5min
|
|
close_action:
|
|
- switch.turn_on: gpio_switch2
|
|
close_duration: 4.5min
|
|
- platform: template
|
|
name: Template Cover with Tilt
|
|
tilt_lambda: "return 0.5;"
|
|
tilt_action:
|
|
- output.set_level:
|
|
id: out
|
|
level: !lambda "return tilt;"
|
|
position_action:
|
|
- output.set_level:
|
|
id: out
|
|
level: !lambda "return pos;"
|
|
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: out
|
|
pin: D3
|
|
frequency: 50Hz
|
|
- platform: custom
|
|
type: binary
|
|
lambda: |-
|
|
auto s = new CustomBinaryOutput();
|
|
App.register_component(s);
|
|
return {s};
|
|
outputs:
|
|
- id: custom_binary
|
|
- platform: custom
|
|
type: float
|
|
lambda: |-
|
|
auto s = new CustomFloatOutput();
|
|
App.register_component(s);
|
|
return {s};
|
|
outputs:
|
|
- id: custom_float
|
|
- platform: ac_dimmer
|
|
id: dimmer1
|
|
gate_pin: GPIO5
|
|
zero_cross_pin: GPIO12
|
|
|
|
mcp23017:
|
|
id: mcp23017_hub
|
|
|
|
mcp23008:
|
|
id: mcp23008_hub
|
|
|
|
light:
|
|
- platform: neopixelbus
|
|
name: Neopixelbus Light
|
|
pin: GPIO1
|
|
type: GRBW
|
|
variant: SK6812
|
|
method: ESP8266_UART0
|
|
num_leds: 100
|
|
|
|
servo:
|
|
id: my_servo
|
|
output: out
|
|
restore: true
|
|
|
|
ttp229_lsf:
|
|
|
|
ttp229_bsf:
|
|
sdo_pin: D0
|
|
scl_pin: D1
|
|
|
|
sim800l:
|
|
on_sms_received:
|
|
- lambda: |-
|
|
std::string str;
|
|
str = sender;
|
|
str = message;
|
|
- sim800l.send_sms:
|
|
message: 'hello you'
|
|
recipient: '+1234'
|
|
|
|
dfplayer:
|
|
on_finished_playback:
|
|
then:
|
|
if:
|
|
condition:
|
|
not:
|
|
dfplayer.is_playing
|
|
then:
|
|
logger.log: 'Playback finished event'
|
|
tm1651:
|
|
id: tm1651_battery
|
|
clk_pin: D6
|
|
dio_pin: D5
|
|
rf_bridge:
|
|
on_code_received:
|
|
- lambda: |-
|
|
uint32_t test;
|
|
test = data.sync;
|
|
test = data.low;
|
|
test = data.high;
|
|
test = data.code;
|
|
- rf_bridge.send_code:
|
|
sync: 0x1234
|
|
low: 0x1234
|
|
high: 0x1234
|
|
code: 0x123456
|
|
- rf_bridge.learn
|