esphome/esphome/components/ina226/ina226.cpp

#include "ina226.h"
#include "esphome/core/log.h"
#include "esphome/core/hal.h"

namespace esphome {
namespace ina226 {

static const char *const TAG = "ina226";

// | A0   | A1   | Address |
// | GND  | GND  | 0x40    |
// | GND  | V_S+ | 0x41    |
// | GND  | SDA  | 0x42    |
// | GND  | SCL  | 0x43    |
// | V_S+ | GND  | 0x44    |
// | V_S+ | V_S+ | 0x45    |
// | V_S+ | SDA  | 0x46    |
// | V_S+ | SCL  | 0x47    |
// | SDA  | GND  | 0x48    |
// | SDA  | V_S+ | 0x49    |
// | SDA  | SDA  | 0x4A    |
// | SDA  | SCL  | 0x4B    |
// | SCL  | GND  | 0x4C    |
// | SCL  | V_S+ | 0x4D    |
// | SCL  | SDA  | 0x4E    |
// | SCL  | SCL  | 0x4F    |

static const uint8_t INA226_REGISTER_CONFIG = 0x00;
static const uint8_t INA226_REGISTER_SHUNT_VOLTAGE = 0x01;
static const uint8_t INA226_REGISTER_BUS_VOLTAGE = 0x02;
static const uint8_t INA226_REGISTER_POWER = 0x03;
static const uint8_t INA226_REGISTER_CURRENT = 0x04;
static const uint8_t INA226_REGISTER_CALIBRATION = 0x05;

void INA226Component::setup() {
  ESP_LOGCONFIG(TAG, "Setting up INA226...");
  // Config Register
  // 0bx000000000000000 << 15 RESET Bit (1 -> trigger reset)
  if (!this->write_byte_16(INA226_REGISTER_CONFIG, 0x8000)) {
    this->mark_failed();
    return;
  }
  delay(1);

  uint16_t config = 0x0000;

  // Averaging Mode AVG Bit Settings[11:9] (000 -> 1 sample, 001 -> 4 sample, 111 -> 1024 samples)
  config |= 0b0000001000000000;

  // Bus Voltage Conversion Time VBUSCT Bit Settings [8:6] (100 -> 1.1ms, 111 -> 8.244 ms)
  config |= 0b0000000100000000;

  // Shunt Voltage Conversion Time VSHCT Bit Settings [5:3] (100 -> 1.1ms, 111 -> 8.244 ms)
  config |= 0b0000000000100000;

  // Mode Settings [2:0] Combinations (111 -> Shunt and Bus, Continuous)
  config |= 0b0000000000000111;

  if (!this->write_byte_16(INA226_REGISTER_CONFIG, config)) {
    this->mark_failed();
    return;
  }

  // lsb is multiplied by 1000000 to store it as an integer value
  uint32_t lsb = static_cast<uint32_t>(ceilf(this->max_current_a_ * 1000000.0f / 32768));

  this->calibration_lsb_ = lsb;

  auto calibration = uint32_t(0.00512 / (lsb * this->shunt_resistance_ohm_ / 1000000.0f));

  ESP_LOGV(TAG, "    Using LSB=%u calibration=%u", lsb, calibration);

  if (!this->write_byte_16(INA226_REGISTER_CALIBRATION, calibration)) {
    this->mark_failed();
    return;
  }
}

void INA226Component::dump_config() {
  ESP_LOGCONFIG(TAG, "INA226:");
  LOG_I2C_DEVICE(this);

  if (this->is_failed()) {
    ESP_LOGE(TAG, "Communication with INA226 failed!");
    return;
  }
  LOG_UPDATE_INTERVAL(this);

  LOG_SENSOR("  ", "Bus Voltage", this->bus_voltage_sensor_);
  LOG_SENSOR("  ", "Shunt Voltage", this->shunt_voltage_sensor_);
  LOG_SENSOR("  ", "Current", this->current_sensor_);
  LOG_SENSOR("  ", "Power", this->power_sensor_);
}

float INA226Component::get_setup_priority() const { return setup_priority::DATA; }

void INA226Component::update() {
  if (this->bus_voltage_sensor_ != nullptr) {
    uint16_t raw_bus_voltage;
    if (!this->read_byte_16(INA226_REGISTER_BUS_VOLTAGE, &raw_bus_voltage)) {
      this->status_set_warning();
      return;
    }
    float bus_voltage_v = int16_t(raw_bus_voltage) * 0.00125f;
    this->bus_voltage_sensor_->publish_state(bus_voltage_v);
  }

  if (this->shunt_voltage_sensor_ != nullptr) {
    uint16_t raw_shunt_voltage;
    if (!this->read_byte_16(INA226_REGISTER_SHUNT_VOLTAGE, &raw_shunt_voltage)) {
      this->status_set_warning();
      return;
    }
    float shunt_voltage_v = int16_t(raw_shunt_voltage) * 0.0000025f;
    this->shunt_voltage_sensor_->publish_state(shunt_voltage_v);
  }

  if (this->current_sensor_ != nullptr) {
    uint16_t raw_current;
    if (!this->read_byte_16(INA226_REGISTER_CURRENT, &raw_current)) {
      this->status_set_warning();
      return;
    }
    float current_ma = int16_t(raw_current) * (this->calibration_lsb_ / 1000.0f);
    this->current_sensor_->publish_state(current_ma / 1000.0f);
  }

  if (this->power_sensor_ != nullptr) {
    uint16_t raw_power;
    if (!this->read_byte_16(INA226_REGISTER_POWER, &raw_power)) {
      this->status_set_warning();
      return;
    }
    float power_mw = int16_t(raw_power) * (this->calibration_lsb_ * 25.0f / 1000.0f);
    this->power_sensor_->publish_state(power_mw / 1000.0f);
  }

  this->status_clear_warning();
}

}  // namespace ina226
}  // namespace esphome