esphome/tests/test3.yaml

esphome:
  name: $devicename
  platform: ESP8266
  board: esp07
  # Use this for testing while developing:
  # Note the travis check for esphome PRs will fail until the
  # esphome-core PR has been merged.
  # esphome_core_version:
  #   local: ~/path/to/esphome-core
  build_path: build/test3

substitutions:
  devicename: test3

api:

i2c:
  sda: 4
  scl: 5
  scan: False

spi:
  clk_pin: GPIO12
  mosi_pin: GPIO13
  miso_pin: GPIO14

uart:
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 115200

ota:
  safe_mode: True
  port: 3286

logger:
  hardware_uart: UART1
  level: DEBUG

web_server:

deep_sleep:
  run_duration: 20s
  sleep_duration: 50s

sensor:
  - platform: pmsx003
    type: PMSX003
    pm_1_0:
      name: "PM 1.0 Concentration"
    pm_2_5:
      name: "PM 2.5 Concentration"
    pm_10_0:
      name: "PM 10.0 Concentration"
  - platform: pmsx003
    type: PMS5003T
    pm_2_5:
      name: "PM 2.5 Concentration"
    temperature:
      name: "PMS Temperature"
    humidity:
      name: "PMS Humidity"
  - platform: pmsx003
    type: PMS5003ST
    pm_2_5:
      name: "PM 2.5 Concentration"
    temperature:
      name: "PMS Temperature"
    humidity:
      name: "PMS Humidity"
    formaldehyde:
      name: "PMS Formaldehyde Concentration"
  - platform: cse7766
    voltage:
      name: "CSE7766 Voltage"
    current:
      name: "CSE7766 Current"
    power:
      name: "CSE776 Power"
  - platform: apds9960
    type: proximity
    name: APDS9960 Proximity
  - platform: apds9960
    type: clear
    name: APDS9960 Clear
  - platform: apds9960
    type: red
    name: APDS9960 Red
  - platform: apds9960
    type: green
    name: APDS9960 Green
  - platform: apds9960
    type: blue
    name: APDS9960 Blue
  - platform: homeassistant
    entity_id: sensor.hello_world
    id: ha_hello_world

time:
- platform: homeassistant

apds9960:
  address: 0x20
  update_interval: 60s
  
mpr121:
  id: mpr121_first
  address: 0x5A

binary_sensor:
  - platform: apds9960
    direction: up
    name: APDS9960 Up
  - platform: apds9960
    direction: down
    name: APDS9960 Down
  - platform: apds9960
    direction: left
    name: APDS9960 Left
  - platform: apds9960
    direction: right
    name: APDS9960 Right
  - platform: homeassistant
    entity_id: binary_sensor.hello_world
    id: ha_hello_world_binary
#mpr121
  - platform: mpr121
    id: touchkey0
    channel: 0
    name: "touchkey0"
  - platform: mpr121
    channel: 1
    name: "touchkey1"
  - platform: mpr121
    channel: 2
    name: "touchkey2"
  - platform: mpr121
    channel: 3
    name: "touchkey3"
    on_press:
      then:
        - switch.toggle: mpr121_toggle

remote_receiver:
  pin: GPIO12
  dump: []

status_led:
  pin: GPIO2

text_sensor:
  - platform: version
    name: "ESPHome Version"
    icon: mdi:icon
    id: version_sensor
    on_value:
      - lambda: !lambda |-
          ESP_LOGD("main", "The state is %s=%s", x.c_str(), id(version_sensor).state.c_str());
      - script.execute: my_script
      - homeassistant.service:
          service: notify.html5
          data:
            title: New Humidity
          data_template:
            message: The humidity is {{ my_variable }}%.
          variables:
            my_variable: |-
              return id(version_sensor).state;              
  - platform: template
    name: "Template Text Sensor"
    lambda: |-
      return {"Hello World"};      
  - platform: homeassistant
    entity_id: sensor.hello_world2
    id: ha_hello_world2

script:
  - id: my_script
    then:
      - lambda: 'ESP_LOGD("main", "Hello World!");'

switch:
  - platform: template
    name: "mpr121_toggle"
    id: mpr121_toggle
    optimistic: True

stepper:
  - platform: uln2003
    id: my_stepper
    pin_a: GPIO12
    pin_b: GPIO13
    pin_c: GPIO14
    pin_d: GPIO15
    sleep_when_done: no
    step_mode: HALF_STEP
    max_speed: 250 steps/s

    # Optional:
    acceleration: inf
    deceleration: inf

interval:
  interval: 5s
  then:
    - logger.log: "Interval Run"