Home-IoT/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2024-11-22 06:58:11 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 10
esphome/tests/test2.yaml

617 lines
15 KiB
YAML
Raw Blame History

esphome:
name: $devicename
platform: ESP32
board: nodemcu-32s
build_path: build/test2
substitutions:
devicename: test2
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO25
clk_mode: GPIO0_IN
phy_addr: 0
power_pin: GPIO25
manual_ip:
static_ip: 192.168.178.56
gateway: 192.168.178.1
subnet: 255.255.255.0
domain: .local
mdns:
disabled: true
api:
i2c:
sda: 21
scl: 22
scan: False
spi:
clk_pin: GPIO21
mosi_pin: GPIO22
miso_pin: GPIO23
uart:
tx_pin: GPIO22
rx_pin: GPIO23
baud_rate: 115200
# Specifically added for testing debug with no after: definition.
debug:
dummy_receiver: false
direction: rx
sequence:
- lambda: UARTDebug::log_hex(direction, bytes, ':');
ota:
safe_mode: True
port: 3286
num_attempts: 15
logger:
level: DEBUG
deep_sleep:
run_duration:
default: 20s
gpio_wakeup_reason: 10s
touch_wakeup_reason: 15s
sleep_duration: 50s
wakeup_pin: GPIO2
wakeup_pin_mode: INVERT_WAKEUP
as3935_i2c:
irq_pin: GPIO12
mcp3008:
- id: 'mcp3008_hub'
cs_pin: GPIO12
output:
- platform: ac_dimmer
id: dimmer1
gate_pin: GPIO5
zero_cross_pin: GPIO12
sensor:
- platform: homeassistant
entity_id: sensor.hello_world
id: ha_hello_world
- platform: homeassistant
entity_id: climate.living_room
attribute: temperature
id: ha_hello_world_temperature
- platform: ble_rssi
mac_address: AC:37:43:77:5F:4C
name: 'BLE Google Home Mini RSSI value'
- platform: ble_rssi
service_uuid: '11aa'
name: 'BLE Test Service 16'
- platform: ble_rssi
service_uuid: '11223344'
name: 'BLE Test Service 32'
- platform: ble_rssi
service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
name: 'BLE Test Service 128'
- platform: b_parasite
mac_address: F0:CA:F0:CA:01:01
humidity:
name: 'b-parasite Air Humidity'
temperature:
name: 'b-parasite Air Temperature'
moisture:
name: 'b-parasite Soil Moisture'
battery_voltage:
name: 'b-parasite Battery Voltage'
illuminance:
name: 'b-parasite Illuminance'
- platform: senseair
id: senseair0
co2:
name: 'SenseAir CO2 Value'
on_value:
then:
- senseair.background_calibration: senseair0
- senseair.background_calibration_result: senseair0
- senseair.abc_get_period: senseair0
- senseair.abc_enable: senseair0
- senseair.abc_disable: senseair0
update_interval: 15s
- platform: ruuvitag
mac_address: FF:56:D3:2F:7D:E8
humidity:
name: 'RuuviTag Humidity'
temperature:
name: 'RuuviTag Temperature'
pressure:
name: 'RuuviTag Pressure'
acceleration_x:
name: 'RuuviTag Acceleration X'
acceleration_y:
name: 'RuuviTag Acceleration Y'
acceleration_z:
name: 'RuuviTag Acceleration Z'
battery_voltage:
name: 'RuuviTag Battery Voltage'
tx_power:
name: 'RuuviTag TX Power'
movement_counter:
name: 'RuuviTag Movement Counter'
measurement_sequence_number:
name: 'RuuviTag Measurement Sequence Number'
- platform: as3935
lightning_energy:
name: 'Lightning Energy'
distance:
name: 'Distance Storm'
- platform: xiaomi_hhccjcy01
mac_address: 94:2B:FF:5C:91:61
temperature:
name: 'Xiaomi HHCCJCY01 Temperature'
moisture:
name: 'Xiaomi HHCCJCY01 Moisture'
illuminance:
name: 'Xiaomi HHCCJCY01 Illuminance'
conductivity:
name: 'Xiaomi HHCCJCY01 Soil Conductivity'
battery_level:
name: 'Xiaomi HHCCJCY01 Battery Level'
- platform: xiaomi_lywsdcgq
mac_address: 7A:80:8E:19:36:BA
temperature:
name: 'Xiaomi LYWSDCGQ Temperature'
humidity:
name: 'Xiaomi LYWSDCGQ Humidity'
battery_level:
name: 'Xiaomi LYWSDCGQ Battery Level'
- platform: xiaomi_lywsd02
mac_address: 3F:5B:7D:82:58:4E
temperature:
name: 'Xiaomi LYWSD02 Temperature'
humidity:
name: 'Xiaomi LYWSD02 Humidity'
battery_level:
name: 'Xiaomi LYWSD02 Battery Level'
- platform: xiaomi_cgg1
mac_address: 7A:80:8E:19:36:BA
temperature:
name: 'Xiaomi CGG1 Temperature'
humidity:
name: 'Xiaomi CGG1 Humidity'
battery_level:
name: 'Xiaomi CGG1 Battery Level'
- platform: xiaomi_gcls002
mac_address: '94:2B:FF:5C:91:61'
temperature:
name: 'GCLS02 Temperature'
moisture:
name: 'GCLS02 Moisture'
conductivity:
name: 'GCLS02 Soil Conductivity'
illuminance:
name: 'GCLS02 Illuminance'
- platform: xiaomi_hhccpot002
mac_address: '94:2B:FF:5C:91:61'
moisture:
name: 'HHCCPOT002 Moisture'
conductivity:
name: 'HHCCPOT002 Soil Conductivity'
- platform: xiaomi_lywsd03mmc
mac_address: 'A4:C1:38:4E:16:78'
bindkey: 'e9efaa6873f9f9c87a5e75a5f814801c'
temperature:
name: 'Xiaomi LYWSD03MMC Temperature'
humidity:
name: 'Xiaomi LYWSD03MMC Humidity'
battery_level:
name: 'Xiaomi LYWSD03MMC Battery Level'
- platform: xiaomi_cgd1
mac_address: 'A4:C1:38:D1:61:7D'
bindkey: 'c99d2313182473b38001086febf781bd'
temperature:
name: 'Xiaomi CGD1 Temperature'
humidity:
name: 'Xiaomi CGD1 Humidity'
battery_level:
name: 'Xiaomi CGD1 Battery Level'
- platform: xiaomi_jqjcy01ym
mac_address: '7A:80:8E:19:36:BA'
temperature:
name: 'JQJCY01YM Temperature'
humidity:
name: 'JQJCY01YM Humidity'
formaldehyde:
name: 'JQJCY01YM Formaldehyde'
battery_level:
name: 'JQJCY01YM Battery Level'
- platform: xiaomi_mhoc303
mac_address: 'E7:50:59:32:A0:1C'
temperature:
name: 'MHO-C303 Temperature'
humidity:
name: 'MHO-C303 Humidity'
battery_level:
name: 'MHO-C303 Battery Level'
- platform: atc_mithermometer
mac_address: 'A4:C1:38:4E:16:78'
temperature:
name: 'ATC Temperature'
humidity:
name: 'ATC Humidity'
battery_level:
name: 'ATC Battery-Level'
battery_voltage:
name: 'ATC Battery-Voltage'
- platform: pvvx_mithermometer
mac_address: 'A4:C1:38:4E:16:78'
temperature:
name: 'PVVX Temperature'
humidity:
name: 'PVVX Humidity'
battery_level:
name: 'PVVX Battery-Level'
battery_voltage:
name: 'PVVX Battery-Voltage'
- platform: inkbird_ibsth1_mini
mac_address: 38:81:D7:0A:9C:11
temperature:
name: 'Inkbird IBS-TH1 Temperature'
humidity:
name: 'Inkbird IBS-TH1 Humidity'
battery_level:
name: 'Inkbird IBS-TH1 Battery Level'
- platform: xiaomi_rtcgq02lm
id: motion_rtcgq02lm
battery_level:
name: 'Mi Motion Sensor 2 Battery level'
- platform: ltr390
uv:
name: "LTR390 UV"
uv_index:
name: "LTR390 UVI"
light:
name: "LTR390 Light"
ambient_light:
name: "LTR390 ALS"
gain: "X3"
resolution: 18
window_correction_factor: 1.0
address: 0x53
update_interval: 60s
- platform: sgp4x
voc:
name: "VOC Index"
id: sgp40_voc_index
algorithm_tuning:
index_offset: 100
learning_time_offset_hours: 12
learning_time_gain_hours: 12
gating_max_duration_minutes: 180
std_initial: 50
gain_factor: 230
nox:
name: "NOx"
algorithm_tuning:
index_offset: 100
learning_time_offset_hours: 12
learning_time_gain_hours: 12
gating_max_duration_minutes: 180
std_initial: 50
gain_factor: 230
update_interval: 5s
- platform: mcp3008
update_interval: 5s
mcp3008_id: 'mcp3008_hub'
id: freezer_temp_source
reference_voltage: 3.19
number: 0
- platform: airthings_wave_plus
ble_client_id: airthings01
update_interval: 5min
temperature:
name: "Wave Plus Temperature"
radon:
name: "Wave Plus Radon"
radon_long_term:
name: "Wave Plus Radon Long Term"
pressure:
name: "Wave Plus Pressure"
humidity:
name: "Wave Plus Humidity"
co2:
name: "Wave Plus CO2"
tvoc:
name: "Wave Plus VOC"
- platform: airthings_wave_mini
ble_client_id: airthingsmini01
update_interval: 5min
temperature:
name: "Wave Mini Temperature"
humidity:
name: "Wave Mini Humidity"
pressure:
name: "Wave Mini Pressure"
tvoc:
name: "Wave Mini VOC"
- platform: ina260
address: 0x40
current:
name: "INA260 Current"
power:
name: "INA260 Power"
bus_voltage:
name: "INA260 Voltage"
update_interval: 60s
- platform: radon_eye_rd200
ble_client_id: radon_eye_ble_id
update_interval: 10min
radon:
name: "RD200 Radon"
radon_long_term:
name: "RD200 Radon Long Term"
- platform: mopeka_pro_check
mac_address: D3:75:F2:DC:16:91
tank_type: CUSTOM
custom_distance_full: 40cm
custom_distance_empty: 10mm
temperature:
name: "Propane test temp"
level:
name: "Propane test level"
distance:
name: "Propane test distance"
battery_level:
name: "Propane test battery level"
time:
- platform: homeassistant
on_time:
- at: '16:00:00'
then:
- logger.log: It's 16:00
esp32_touch:
setup_mode: True
binary_sensor:
- platform: homeassistant
entity_id: binary_sensor.hello_world
id: ha_hello_world_binary
- platform: homeassistant
entity_id: binary_sensor.hello
attribute: world
id: ha_hello_world_binary_attribute
- platform: ble_presence
mac_address: AC:37:43:77:5F:4C
name: 'ESP32 BLE Tracker Google Home Mini'
- platform: ble_presence
service_uuid: '11aa'
name: 'BLE Test Service 16 Presence'
- platform: ble_presence
service_uuid: '11223344'
name: 'BLE Test Service 32 Presence'
- platform: ble_presence
service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
name: 'BLE Test Service 128 Presence'
- platform: ble_presence
ibeacon_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
ibeacon_major: 100
ibeacon_minor: 1
name: 'BLE Test iBeacon Presence'
- platform: esp32_touch
name: 'ESP32 Touch Pad GPIO27'
pin: GPIO27
threshold: 1000
- platform: as3935
name: 'Storm Alert'
- platform: xiaomi_mue4094rt
name: 'MUE4094RT Motion'
mac_address: '7A:80:8E:19:36:BA'
timeout: '5s'
- platform: xiaomi_mjyd02yla
name: 'MJYD02YL-A Motion'
mac_address: '50:EC:50:CD:32:02'
bindkey: '48403ebe2d385db8d0c187f81e62cb64'
idle_time:
name: 'MJYD02YL-A Idle Time'
light:
name: 'MJYD02YL-A Light Status'
battery_level:
name: 'MJYD02YL-A Battery Level'
- platform: xiaomi_wx08zm
name: 'WX08ZM Activation State'
mac_address: '74:a3:4a:b5:07:34'
tablet:
name: 'WX08ZM Tablet Resource'
battery_level:
name: 'WX08ZM Battery Level'
- platform: xiaomi_cgpr1
name: 'CGPR1 Motion'
mac_address: '12:34:56:12:34:56'
bindkey: '48403ebe2d385db8d0c187f81e62cb64'
battery_level:
name: 'CGPR1 battery Level'
idle_time:
name: 'CGPR1 Idle Time'
illuminance:
name: 'CGPR1 Illuminance'
- platform: xiaomi_rtcgq02lm
id: motion_rtcgq02lm
motion:
name: 'Mi Motion Sensor 2'
light:
name: 'Mi Motion Sensor 2 Light'
button:
name: 'Mi Motion Sensor 2 Button'
esp32_ble_tracker:
on_ble_advertise:
- mac_address: AC:37:43:77:5F:4C
then:
- lambda: !lambda |-
ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
- then:
- lambda: !lambda |-
ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
on_ble_service_data_advertise:
- service_uuid: ABCD
then:
- lambda: !lambda |-
ESP_LOGD("main", "Length of service data is %i", x.size());
on_ble_manufacturer_data_advertise:
- manufacturer_id: ABCD
then:
- lambda: !lambda |-
ESP_LOGD("main", "Length of manufacturer data is %i", x.size());
ble_client:
- mac_address: 01:02:03:04:05:06
id: airthings01
- mac_address: 01:02:03:04:05:06
id: airthingsmini01
- mac_address: 01:02:03:04:05:06
id: radon_eye_ble_id
airthings_ble:
radon_eye_ble:
ruuvi_ble:
xiaomi_ble:
mopeka_ble:
xiaomi_rtcgq02lm:
- id: motion_rtcgq02lm
mac_address: 01:02:03:04:05:06
bindkey: '48403ebe2d385db8d0c187f81e62cb64'
#esp32_ble_beacon:
# type: iBeacon
# uuid: 'c29ce823-e67a-4e71-bff2-abaa32e77a98'
status_led:
pin: GPIO2
text_sensor:
- platform: version
name: 'ESPHome Version'
icon: mdi:icon
id: version_sensor
on_value:
- if:
condition:
- api.connected:
then:
- lambda: !lambda |-
ESP_LOGD("main", "The state is %s=%s", x.c_str(), id(version_sensor).state.c_str());
- script.execute: my_script
- homeassistant.service:
service: notify.html5
data:
title: New Humidity
data_template:
message: The humidity is {{ my_variable }}%.
variables:
my_variable: |-
return id(version_sensor).state;
my_variable_str: |-
return "Hello World";
- homeassistant.service:
service: light.turn_on
data:
entity_id: light.my_light
- homeassistant.tag_scanned:
tag: 1234-abcd
- homeassistant.tag_scanned: 1234-abcd
- deep_sleep.enter:
sleep_duration: 30min
- deep_sleep.enter:
sleep_duration: !lambda "return 30 * 60 * 1000;"
- platform: template
name: 'Template Text Sensor'
lambda: |-
return {"Hello World"};
filters:
- to_upper:
- to_lower:
- append: "xyz"
- prepend: "abcd"
- substitute:
- Hello -> Goodbye
- map:
- red -> green
- lambda: return {"1234"};
- platform: homeassistant
entity_id: sensor.hello_world2
id: ha_hello_world2
- platform: homeassistant
entity_id: sensor.hello_world3
id: ha_hello_world3
attribute: some_attribute
- platform: ble_scanner
name: Scanner
script:
- id: my_script
mode: single
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
- id: my_script_queued
mode: queued
max_runs: 2
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
- id: my_script_parallel
mode: parallel
max_runs: 2
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
- id: my_script_restart
mode: restart
then:
- lambda: 'ESP_LOGD("main", "Hello World!");'
stepper:
- platform: uln2003
id: my_stepper
pin_a: GPIO23
pin_b: GPIO27
pin_c: GPIO25
pin_d: GPIO26
sleep_when_done: no
step_mode: HALF_STEP
max_speed: 250 steps/s
# Optional:
acceleration: inf
deceleration: inf
interval:
interval: 5s
then:
- logger.log: 'Interval Run'
display:
cap1188:
id: cap1188_component
address: 0x29
touch_threshold: 0x20
allow_multiple_touches: true
reset_pin: 14
switch:
- platform: template
name: "Test BLE Write Action"
turn_on_action:
- ble_client.ble_write:
id: airthings01
service_uuid: F61E3BE9-2826-A81B-970A-4D4DECFABBAE
characteristic_uuid: 6490FAFE-0734-732C-8705-91B653A081FC
value: [0x01, 0xab, 0xff]
Reference in a new issue View git blame Copy permalink