esphome/tests/test1.1.yaml
2024-01-04 00:03:38 +11:00

320 lines
6.7 KiB
YAML

---
substitutions:
devicename: test1_1
sensorname: my
textname: template
roomname: fastled_room
esphome:
name: test1-1
name_add_mac_suffix: true
platform: ESP32
board: nodemcu-32s
platformio_options:
board_build.partitions: huge_app.csv
on_loop:
then:
- light.addressable_set:
id: addr1
range_from: 0
range_to: 100
red: 100%
green: !lambda "return 255;"
blue: 0%
white: 100%
wled:
wifi:
networks:
- ssid: "MySSID"
password: "password1"
uart:
- id: adalight_uart
tx_pin: GPIO25
rx_pin: GPIO26
baud_rate: 115200
rx_buffer_size: 1024
adalight:
network:
e131:
power_supply:
- id: atx_power_supply
enable_time: 20ms
keep_on_time: 10s
enable_on_boot: true
pin:
number: 13
inverted: true
i2c:
sda: 21
scl:
number: 22
allow_other_uses: true
scan: true
frequency: 100kHz
setup_priority: -100
id: i2c_bus
spi:
id: spi_bus
clk_pin:
allow_other_uses: true
number: GPIO21
mosi_pin:
allow_other_uses: true
number: GPIO22
miso_pin:
allow_other_uses: true
number: GPIO23
pca9685:
frequency: 500
address: 0x0
i2c_id: i2c_bus
output:
- platform: pca9685
id: pca_0
channel: 0
- platform: pca9685
id: pca_1
channel: 1
- platform: pca9685
id: pca_2
channel: 2
light:
- platform: rgb
name: Living Room Lights
id: ${roomname}_lights
red: pca_0
green: pca_1
blue: pca_2
- platform: fastled_clockless
id: addr1
chipset: WS2811
pin:
allow_other_uses: true
number: GPIO23
num_leds: 60
rgb_order: BRG
max_refresh_rate: 20ms
power_supply: atx_power_supply
color_correct: [75%, 100%, 50%]
name: FastLED WS2811 Light
effects:
- addressable_color_wipe:
- addressable_color_wipe:
name: Color Wipe Effect With Custom Values
colors:
- red: 100%
green: 100%
blue: 100%
num_leds: 1
- red: 0%
green: 0%
blue: 0%
num_leds: 1
add_led_interval: 100ms
reverse: false
- addressable_scan:
- addressable_scan:
name: Scan Effect With Custom Values
move_interval: 100ms
- addressable_twinkle:
- addressable_twinkle:
name: Twinkle Effect With Custom Values
twinkle_probability: 5%
progress_interval: 4ms
- addressable_random_twinkle:
- addressable_random_twinkle:
name: Random Twinkle Effect With Custom Values
twinkle_probability: 5%
progress_interval: 32ms
- addressable_fireworks:
- addressable_fireworks:
name: Fireworks Effect With Custom Values
update_interval: 32ms
spark_probability: 10%
use_random_color: false
fade_out_rate: 120
- addressable_flicker:
- addressable_flicker:
name: Flicker Effect With Custom Values
update_interval: 16ms
intensity: 5%
- addressable_lambda:
name: Test For Custom Lambda Effect
lambda: |-
if (initial_run) {
it[0] = current_color;
}
- wled:
port: 11111
- adalight:
uart_id: adalight_uart
- e131:
universe: 1
- automation:
name: Custom Effect
sequence:
- light.addressable_set:
id: addr1
red: 100%
green: 100%
blue: 0%
- delay: 100ms
- light.addressable_set:
id: addr1
red: 0%
green: 100%
blue: 0%
- platform: fastled_spi
id: addr2
chipset: WS2801
data_pin:
allow_other_uses: true
number: GPIO23
clock_pin:
number: GPIO22
allow_other_uses: true
data_rate: 2MHz
num_leds: 60
rgb_order: BRG
name: FastLED SPI Light
- platform: neopixelbus
id: addr3
name: Neopixelbus Light
gamma_correct: 2.8
color_correct: [0.0, 0.0, 0.0, 0.0]
default_transition_length: 10s
power_supply: atx_power_supply
effects:
- addressable_flicker:
name: Flicker Effect With Custom Values
update_interval: 16ms
intensity: 5%
type: GRBW
variant: SK6812
method: ESP32_I2S_0
num_leds: 60
pin:
allow_other_uses: true
number: GPIO23
- platform: partition
name: Partition Light
segments:
- id: addr1
from: 0
to: 0
- id: addr2
from: 1
to: 10
- id: addr2
from: 20
to: 25
- single_light_id: ${roomname}_lights
canbus:
- platform: esp32_can
id: esp32_internal_can
rx_pin: GPIO04
tx_pin: GPIO05
can_id: 4
bit_rate: 50kbps
button:
- platform: template
name: Canbus Actions
on_press:
- canbus.send: "abc"
- canbus.send: [0, 1, 2]
- canbus.send: !lambda return {0, 1, 2};
display:
- platform: ili9xxx
invert_colors: true
dimensions: 320x240
transform:
swap_xy: true
mirror_x: true
mirror_y: false
model: TFT 2.4
cs_pin:
allow_other_uses: true
number: GPIO5
dc_pin:
number: GPIO19
color_palette: GRAYSCALE
reset_pin:
allow_other_uses: true
number: GPIO22
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
font:
- file: "gfonts://Roboto"
id: roboto
size: 20
color:
- id: layout_black
red: 100%
green: 100%
blue: 100%
- id: layout_white
red: 0%
green: 0%
blue: 0%
graphical_layout:
id: test_graphical_layout
layout:
type: horizontal_stack
child_align: stretch_to_fit_height
items:
- type: fixed_dimension_panel
width: 100
height: 100
border: 1
child:
type: text_panel
text: "Simple text panel"
font: roboto
- type: vertical_stack
item_padding: 1
margin: 1
padding: 1
border: 1
border_color: layout_black
items:
- type: display_rendering_panel
height: 50
width: 50
lambda: |-
it.filled_circle(25, 25, 10);
- type: text_run_panel
text_align: baseline_center
max_width: 100
runs:
- font: roboto
text: Hello
- font: roboto
text: World
background_color: layout_black
foreground_color: layout_white
- font: roboto
text: !lambda |-
return "Dynamic text";