debian/notmuch
1
0
Fork 0
mirror of https://git.notmuchmail.org/git/notmuch synced 2024-11-22 10:58:10 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
notmuch/lib/parse-time-vrp.cc

87 lines
2.8 KiB
C++
Raw Permalink Normal View History

lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
/* parse-time-vrp.cc - date range query glue
*
* This file is part of notmuch.
*
* Copyright © 2012 Jani Nikula
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
Use https instead of http where possible Many of the external links found in the notmuch source can be resolved using https instead of http. This changeset addresses as many as i could find, without touching the e-mail corpus or expected outputs found in tests.
2016-06-02 18:26:14 +02:00
* along with this program. If not, see https://www.gnu.org/licenses/ .
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
*
* Author: Jani Nikula <jani@nikula.org>
*/
#include "database-private.h"
#include "parse-time-vrp.h"
#include "parse-time-string.h"
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
Xapian::Query
ParseTimeRangeProcessor::operator() (const std::string &begin, const std::string &end)
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
{
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
double from = DBL_MIN, to = DBL_MAX;
time_t parsed_time, now;
std::string str;
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
/* Use the same 'now' for begin and end. */
if (time (&now) == (time_t) -1)
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
throw Xapian::QueryParserError ("unable to get current time");
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
lib: run uncrustify This is the result of running $ uncrustify --replace --config ../devel/uncrustify.cfg *.c *.h *.cc in the lib directory
2021-03-13 13:45:34 +01:00
if (! begin.empty ()) {
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
if (parse_time_string (begin.c_str (), &parsed_time, &now, PARSE_TIME_ROUND_DOWN))
throw Xapian::QueryParserError ("Didn't understand date specification '" + begin + "'");
else
from = (double) parsed_time;
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
}
lib: run uncrustify This is the result of running $ uncrustify --replace --config ../devel/uncrustify.cfg *.c *.h *.cc in the lib directory
2021-03-13 13:45:34 +01:00
if (! end.empty ()) {
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
if (end == "!" && ! begin.empty ())
str = begin;
else
str = end;
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
if (parse_time_string (str.c_str (), &parsed_time, &now, PARSE_TIME_ROUND_UP_INCLUSIVE))
throw Xapian::QueryParserError ("Didn't understand date specification '" + str + "'");
else
to = (double) parsed_time;
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
}
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
return Xapian::Query (Xapian::Query::OP_VALUE_RANGE, slot,
Xapian::sortable_serialise (from),
Xapian::sortable_serialise (to));
lib: add date range query support Add a custom value range processor to enable date and time searches of the form date:since..until, where "since" and "until" are expressions understood by the previously added date/time parser, to restrict the results to messages within a particular time range (based on the Date: header). If "since" or "until" describes date/time at an accuracy of days or less, the values are rounded according to the accuracy, towards past for "since" and towards future for "until". For example, date:november..yesterday would match from the beginning of November until the end of yesterday. Expressions such as date:today..today means since the beginning of today until the end of today. Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can specify date:..until or date:since.. to not limit the start or end date, respectively. CAVEATS: Xapian does not support spaces in range expressions. You can replace the spaces with '_', or (in most cases) '-', or (in some cases) leave the spaces out altogether. Entering date:expr without ".." (for example date:yesterday) will not work as you might expect. You can achieve the expected result by duplicating the expr both sides of ".." (for example date:yesterday..yesterday). Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't produce an error either. Signed-off-by: Jani Nikula <jani@nikula.org>
2012-10-30 21:32:37 +01:00
}
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
/* XXX TODO: is throwing an exception the right thing to do here? */
lib: run uncrustify This is the result of running $ uncrustify --replace --config ../devel/uncrustify.cfg *.c *.h *.cc in the lib directory
2019-06-13 12:55:35 +02:00
Xapian::Query
DateFieldProcessor::operator() (const std::string & str)
{
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
double from = DBL_MIN, to = DBL_MAX;
time_t parsed_time, now;
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
/* Use the same 'now' for begin and end. */
if (time (&now) == (time_t) -1)
lib: run uncrustify This is the result of running $ uncrustify --replace --config ../devel/uncrustify.cfg *.c *.h *.cc in the lib directory
2019-06-13 12:55:35 +02:00
throw Xapian::QueryParserError ("Unable to get current time");
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
if (parse_time_string (str.c_str (), &parsed_time, &now, PARSE_TIME_ROUND_DOWN))
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
throw Xapian::QueryParserError ("Didn't understand date specification '" + str + "'");
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
else
from = (double) parsed_time;
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
if (parse_time_string (str.c_str (), &parsed_time, &now, PARSE_TIME_ROUND_UP_INCLUSIVE))
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
throw Xapian::QueryParserError ("Didn't understand date specification '" + str + "'");
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
else
to = (double) parsed_time;
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
lib: migrate from Xapian ValueRangeProcessor to RangeProcessor This will be mandatory as of Xapian 1.5. The API is also more consistent with the FieldProcessor API, which helps code re-use a bit. Note that this switches to using the built-in Xapian support for prefixes on ranges (i.e. deleted code at beginning of ParseTimeRangeProcessor::operator(), added prefix to constructor). Another side effect of the migration is that we are generating smaller queries, using one OP_VALUE_RANGE instead of an AND of two OP_VALUE_* queries.
2020-07-07 12:56:46 +02:00
return Xapian::Query (Xapian::Query::OP_VALUE_RANGE, slot,
Xapian::sortable_serialise (from),
Xapian::sortable_serialise (to));
lib: optionally support single argument date: queries This relies on the FieldProcessor API, which is only present in xapian >= 1.3.
2016-03-22 11:54:44 +01:00
}
Reference in a new issue Copy permalink