emacs: Use cl-lib' instead of deprecated cl'

Starting with Emacs 27 the old `cl' implementation is finally
considered obsolete.  Previously its use was strongly discouraged
at run-time but one was still allowed to use it at compile-time.

For the most part the transition is very simple and boils down to
adding the "cl-" prefix to some symbols.  A few replacements do not
follow that simple pattern; e.g. `first' is replaced with `car',
even though the alias `cl-first' exists, because the latter is not
idiomatic emacs-lisp.

In a few cases we start using `pcase-let' or `pcase-lambda' instead
of renaming e.g. `first' to `car'.  That way we can remind the reader
of the meaning of the various parts of the data that is being
deconstructed.

An obsolete `lexical-let' and a `lexical-let*' are replaced with their
regular variants `let' and `let*' even though we do not at the same
time enable `lexical-binding' for that file.  That is the right thing
to do because it does not actually make a difference in those cases
whether lexical bindings are used or not, and because this should be
enabled in a separate commit.

We need to explicitly depend on the `cl-lib' package because Emacs
24.1 and 24.2 lack that library.  When using these releases we end
up using the backport from GNU Elpa.

We need to explicitly require the `pcase' library because
`pcase-dolist' was not autoloaded until Emacs 25.1.
This commit is contained in:
Jonas Bernoulli 2020-04-25 22:18:07 +02:00 committed by David Bremner
parent 7b756d1e38
commit 11ac932a45
16 changed files with 304 additions and 299 deletions

View file

@ -27,7 +27,8 @@
;;; Code:
(eval-when-compile (require 'cl))
(eval-when-compile (require 'cl-lib))
(require 'notmuch-lib)
(defvar notmuch-company-last-prefix nil)
@ -65,7 +66,7 @@
(require 'company)
(let ((case-fold-search t)
(completion-ignore-case t))
(case command
(cl-case command
(interactive (company-begin-backend 'notmuch-company))
(prefix (and (derived-mode-p 'message-mode)
(looking-back (concat notmuch-address-completion-headers-regexp ".*")

View file

@ -152,7 +152,7 @@ Used when a new version is saved, or the message is sent."
"Checks if we should save a message that should be encrypted.
`notmuch-draft-save-plaintext' controls the behaviour."
(case notmuch-draft-save-plaintext
(cl-case notmuch-draft-save-plaintext
((ask)
(unless (yes-or-no-p "(Customize `notmuch-draft-save-plaintext' to avoid this warning)
This message contains mml tags that suggest it is intended to be encrypted.

View file

@ -21,7 +21,8 @@
;;; Code:
(eval-when-compile (require 'cl))
(eval-when-compile (require 'cl-lib))
(require 'widget)
(require 'wid-edit) ; For `widget-forward'.
@ -47,17 +48,19 @@ lists (NAME QUERY COUNT-QUERY)."
((keywordp (car saved-search))
(plist-get saved-search field))
;; It is not a plist so it is an old-style entry.
((consp (cdr saved-search)) ;; It is a list (NAME QUERY COUNT-QUERY)
(case field
(:name (first saved-search))
(:query (second saved-search))
(:count-query (third saved-search))
(t nil)))
(t ;; It is a cons-cell (NAME . QUERY)
(case field
(:name (car saved-search))
(:query (cdr saved-search))
(t nil)))))
((consp (cdr saved-search))
(pcase-let ((`(,name ,query ,count-query) saved-search))
(cl-case field
(:name name)
(:query query)
(:count-query count-query)
(t nil))))
(t
(pcase-let ((`(,name . ,query) saved-search))
(cl-case field
(:name name)
(:query query)
(t nil))))))
(defun notmuch-hello-saved-search-to-plist (saved-search)
"Return a copy of SAVED-SEARCH in plist form.
@ -66,7 +69,7 @@ If saved search is a plist then just return a copy. In other
cases, for backwards compatibility, convert to plist form and
return that."
(if (keywordp (car saved-search))
(copy-seq saved-search)
(copy-sequence saved-search)
(let ((fields (list :name :query :count-query))
plist-search)
(dolist (field fields plist-search)
@ -396,7 +399,7 @@ afterwards.")
notmuch-saved-searches)))
;; If an existing saved search with this name exists, remove it.
(setq notmuch-saved-searches
(loop for elem in notmuch-saved-searches
(cl-loop for elem in notmuch-saved-searches
if (not (equal name
(notmuch-saved-search-get elem :name)))
collect elem))
@ -417,13 +420,13 @@ afterwards.")
(notmuch-hello-update)))
(defun notmuch-hello-longest-label (searches-alist)
(or (loop for elem in searches-alist
(or (cl-loop for elem in searches-alist
maximize (length (notmuch-saved-search-get elem :name)))
0))
(defun notmuch-hello-reflect-generate-row (ncols nrows row list)
(let ((len (length list)))
(loop for col from 0 to (- ncols 1)
(cl-loop for col from 0 to (- ncols 1)
collect (let ((offset (+ (* nrows col) row)))
(if (< offset len)
(nth offset list)
@ -437,7 +440,7 @@ afterwards.")
diagonal."
;; Not very lispy...
(let ((nrows (ceiling (length list) ncols)))
(loop for row from 0 to (- nrows 1)
(cl-loop for row from 0 to (- nrows 1)
append (notmuch-hello-reflect-generate-row ncols nrows row list))))
(defun notmuch-hello-widget-search (widget &rest ignore)
@ -584,7 +587,7 @@ with `notmuch-hello-query-counts'."
(widget-insert (make-string column-indent ? )))
(let* ((name (plist-get elem :name))
(query (plist-get elem :query))
(oldest-first (case (plist-get elem :sort-order)
(oldest-first (cl-case (plist-get elem :sort-order)
(newest-first nil)
(oldest-first t)
(otherwise notmuch-search-oldest-first)))
@ -812,7 +815,7 @@ Complete list of currently available key bindings:
"clear")
(widget-insert "\n\n")
(let ((start (point)))
(loop for i from 1 to notmuch-hello-recent-searches-max
(cl-loop for i from 1 to notmuch-hello-recent-searches-max
for search in notmuch-search-history do
(let ((widget-symbol (intern (format "notmuch-hello-search-%d" i))))
(set widget-symbol

View file

@ -22,7 +22,9 @@
;;; Code:
(eval-when-compile (require 'cl))
(eval-when-compile
(require 'cl-lib)
(require 'pcase))
(require 'notmuch-lib)
(require 'notmuch-hello)
@ -51,7 +53,7 @@ fast way to jump to a saved search from anywhere in Notmuch."
(let ((name (plist-get saved-search :name))
(query (plist-get saved-search :query))
(oldest-first
(case (plist-get saved-search :sort-order)
(cl-case (plist-get saved-search :sort-order)
(newest-first nil)
(oldest-first t)
(otherwise (default-value 'notmuch-search-oldest-first)))))
@ -127,18 +129,16 @@ buffer."
;; Compute the maximum key description width
(let ((key-width 1))
(dolist (entry action-map)
(pcase-dolist (`(,key ,desc) action-map)
(setq key-width
(max key-width
(string-width (format-kbd-macro (first entry))))))
(string-width (format-kbd-macro key)))))
;; Format each action
(mapcar (lambda (entry)
(let ((key (format-kbd-macro (first entry)))
(desc (second entry)))
(concat
(propertize key 'face 'minibuffer-prompt)
(mapcar (pcase-lambda (`(,key ,desc))
(setq key (format-kbd-macro key))
(concat (propertize key 'face 'minibuffer-prompt)
(make-string (- key-width (length key)) ? )
" " desc)))
" " desc))
action-map)))
(defun notmuch-jump--insert-items (width items)
@ -173,28 +173,25 @@ buffer."
"Translate ACTION-MAP into a minibuffer keymap."
(let ((map (make-sparse-keymap)))
(set-keymap-parent map notmuch-jump-minibuffer-map)
(dolist (action action-map)
(if (= (length (first action)) 1)
(define-key map (first action)
(pcase-dolist (`(,key ,name ,fn) action-map)
(if (= (length key) 1)
(define-key map key
`(lambda () (interactive)
(setq notmuch-jump--action ',(third action))
(setq notmuch-jump--action ',fn)
(exit-minibuffer)))))
;; By doing this in two passes (and checking if we already have a
;; binding) we avoid problems if the user specifies a binding which
;; is a prefix of another binding.
(dolist (action action-map)
(if (> (length (first action)) 1)
(let* ((key (elt (first action) 0))
(pcase-dolist (`(,key ,name ,fn) action-map)
(if (> (length key) 1)
(let* ((key (elt key 0))
(keystr (string key))
(new-prompt (concat prompt (format-kbd-macro keystr) " "))
(action-submap nil))
(unless (lookup-key map keystr)
(dolist (act action-map)
(when (= key (elt (first act) 0))
(push (list (substring (first act) 1)
(second act)
(third act))
action-submap)))
(pcase-dolist (`(,k ,n ,f) action-map)
(when (= key (elt k 0))
(push (list (substring k 1) n f) action-submap)))
;; We deal with backspace specially
(push (list (kbd "DEL")
"Backup"

View file

@ -23,10 +23,12 @@
;;; Code:
(require 'cl-lib)
(require 'mm-util)
(require 'mm-view)
(require 'mm-decode)
(require 'cl)
(require 'notmuch-compat)
(unless (require 'notmuch-version nil t)
@ -574,7 +576,7 @@ for this message, if present."
(defun notmuch-parts-filter-by-type (parts type)
"Given a list of message parts, return a list containing the ones matching
the given type."
(remove-if-not
(cl-remove-if-not
(lambda (part) (notmuch-match-content-type (plist-get part :content-type) type))
parts))
@ -685,7 +687,7 @@ current buffer, if possible."
;; have symbols of the form :Header as keys, and the resulting alist will have
;; symbols of the form 'Header as keys.
(defun notmuch-headers-plist-to-alist (plist)
(loop for (key value . rest) on plist by #'cddr
(cl-loop for (key value . rest) on plist by #'cddr
collect (cons (intern (substring (symbol-name key) 1)) value)))
(defun notmuch-face-ensure-list-form (face)
@ -780,7 +782,7 @@ arguments passed to the sentinel. COMMAND and ERR, if provided,
are passed to `notmuch-check-exit-status'. If COMMAND is not
provided, it is taken from `process-command'."
(let ((exit-status
(case (process-status proc)
(cl-case (process-status proc)
((exit) (process-exit-status proc))
((signal) msg))))
(when exit-status
@ -848,7 +850,7 @@ for `call-process'. ARGS is as described for
(let (stdin-string)
(while (keywordp (car args))
(case (car args)
(cl-case (car args)
(:stdin-string (setq stdin-string (cadr args)
args (cddr args)))
(otherwise
@ -1026,8 +1028,4 @@ region if the region is active, or both `point' otherwise."
(provide 'notmuch-lib)
;; Local Variables:
;; byte-compile-warnings: (not cl-functions)
;; End:
;;; notmuch-lib.el ends here

View file

@ -22,7 +22,8 @@
;;; Code:
(eval-when-compile (require 'cl))
(eval-when-compile (require 'cl-lib))
(require 'message)
(require 'notmuch-lib)
@ -251,7 +252,7 @@ If CREATE is non-nil then create the folder if necessary."
(let ((response (notmuch-read-char-choice
"Insert failed: (r)etry, (c)reate folder, (i)gnore, or (e)dit the header? "
'(?r ?c ?i ?e))))
(case response
(cl-case response
(?r (notmuch-maildir-fcc-with-notmuch-insert fcc-header))
(?c (notmuch-maildir-fcc-with-notmuch-insert fcc-header 't))
(?i 't)
@ -335,7 +336,7 @@ if needed."
(let* ((prompt (format "Fcc %s is not a maildir: (r)etry, (c)reate folder, (i)gnore, or (e)dit the header? "
fcc-header))
(response (notmuch-read-char-choice prompt '(?r ?c ?i ?e))))
(case response
(cl-case response
(?r (notmuch-maildir-fcc-file-fcc fcc-header))
(?c (if (file-writable-p fcc-header)
(notmuch-maildir-fcc-create-maildir fcc-header)

View file

@ -21,6 +21,8 @@
;;; Code:
(eval-when-compile (require 'cl-lib))
(require 'message)
(require 'mm-view)
(require 'format-spec)
@ -30,8 +32,6 @@
(require 'notmuch-draft)
(require 'notmuch-message)
(eval-when-compile (require 'cl))
(declare-function notmuch-show-insert-body "notmuch-show" (msg body depth))
(declare-function notmuch-fcc-header-setup "notmuch-maildir-fcc" ())
(declare-function notmuch-maildir-message-do-fcc "notmuch-maildir-fcc" ())
@ -140,7 +140,8 @@ Typically this is added to `notmuch-mua-send-hook'."
;; Limit search from reaching other possible parts of the message
(let ((search-limit (search-forward "\n<#" nil t)))
(message-goto-body)
(loop while (re-search-forward notmuch-mua-attachment-regexp search-limit t)
(cl-loop while (re-search-forward notmuch-mua-attachment-regexp
search-limit t)
;; For every instance of the "attachment" string
;; found, examine the text properties. If the text
;; has either a `face' or `syntax-table' property
@ -203,7 +204,7 @@ Typically this is added to `notmuch-mua-send-hook'."
(defun notmuch-mua-reply-crypto (parts)
"Add mml sign-encrypt flag if any part of original message is encrypted."
(loop for part in parts
(cl-loop for part in parts
if (notmuch-match-content-type (plist-get part :content-type) "multipart/encrypted")
do (mml-secure-message-sign-encrypt)
else if (notmuch-match-content-type (plist-get part :content-type) "multipart/*")
@ -252,7 +253,7 @@ Typically this is added to `notmuch-mua-send-hook'."
;; We modify message-header-format-alist to get around a bug in message.el.
;; See the comment above on notmuch-mua-insert-references.
(let ((message-header-format-alist
(loop for pair in message-header-format-alist
(cl-loop for pair in message-header-format-alist
if (eq (car pair) 'References)
collect (cons 'References
(apply-partially
@ -309,7 +310,7 @@ Typically this is added to `notmuch-mua-send-hook'."
;; Don't indent multipart sub-parts.
(notmuch-show-indent-multipart nil))
;; We don't want sigstatus buttons (an information leak and usually wrong anyway).
(letf (((symbol-function 'notmuch-crypto-insert-sigstatus-button) #'ignore)
(cl-letf (((symbol-function 'notmuch-crypto-insert-sigstatus-button) #'ignore)
((symbol-function 'notmuch-crypto-insert-encstatus-button) #'ignore))
(notmuch-show-insert-body original (plist-get original :body) 0)
(buffer-substring-no-properties (point-min) (point-max))))))
@ -526,10 +527,9 @@ the From: address."
;; Create a buffer-local queue for tag changes triggered when sending the message
(when notmuch-message-forwarded-tags
(setq-local notmuch-message-queued-tag-changes
(loop for id in forward-queries
(cl-loop for id in forward-queries
collect
(cons id
notmuch-message-forwarded-tags))))
(cons id notmuch-message-forwarded-tags))))
;; `message-forward-make-body' shows the User-agent header. Hide
;; it again.
@ -609,7 +609,7 @@ unencrypted. Really send? "))))
(run-hooks 'notmuch-mua-send-hook)
(when (and (notmuch-mua-check-no-misplaced-secure-tag)
(notmuch-mua-check-secure-tag-has-newline))
(letf (((symbol-function 'message-do-fcc) #'notmuch-maildir-message-do-fcc))
(cl-letf (((symbol-function 'message-do-fcc) #'notmuch-maildir-message-do-fcc))
(if exit
(message-send-and-exit arg)
(message-send arg)))))

View file

@ -21,7 +21,7 @@
;;; Code:
(require 'cl)
(eval-when-compile (require 'cl-lib))
(defun notmuch-sexp-create-parser ()
"Return a new streaming S-expression parser.
@ -70,7 +70,7 @@ returns the value."
;; error to be consistent with all other code paths.
(read (current-buffer))
;; Go up a level and return an end token
(decf (notmuch-sexp--depth sp))
(cl-decf (notmuch-sexp--depth sp))
(forward-char)
'end))
((= (char-after) ?\()
@ -94,8 +94,8 @@ returns the value."
(notmuch-sexp--partial-state sp)))
;; A complete value is available if we've
;; reached depth 0.
(depth (first new-state)))
(assert (>= depth 0))
(depth (car new-state)))
(cl-assert (>= depth 0))
(if (= depth 0)
;; Reset partial parse state
(setf (notmuch-sexp--partial-state sp) nil
@ -139,7 +139,7 @@ beginning of a list, throw invalid-read-syntax."
(cond ((eobp) 'retry)
((= (char-after) ?\()
(forward-char)
(incf (notmuch-sexp--depth sp))
(cl-incf (notmuch-sexp--depth sp))
t)
(t
;; Skip over the bad character like `read' does
@ -181,7 +181,7 @@ move point in the input buffer."
(set (make-local-variable 'notmuch-sexp--state) 'begin))
(let (done)
(while (not done)
(case notmuch-sexp--state
(cl-case notmuch-sexp--state
(begin
;; Enter the list
(if (eq (notmuch-sexp-begin-list notmuch-sexp--parser) 'retry)
@ -190,7 +190,7 @@ move point in the input buffer."
(result
;; Parse a result
(let ((result (notmuch-sexp-read notmuch-sexp--parser)))
(case result
(cl-case result
(retry (setq done t))
(end (setq notmuch-sexp--state 'end))
(t (with-current-buffer result-buffer
@ -204,8 +204,4 @@ move point in the input buffer."
(provide 'notmuch-parser)
;; Local Variables:
;; byte-compile-warnings: (not cl-functions)
;; End:
;;; notmuch-parser.el ends here

View file

@ -3,4 +3,5 @@
"notmuch"
%VERSION%
"Emacs based front-end (MUA) for notmuch"
'((emacs "24")))
'((emacs "24")
(cl-lib "0.6.1")))

View file

@ -23,7 +23,10 @@
;;; Code:
(eval-when-compile (require 'cl))
(eval-when-compile
(require 'cl-lib)
(require 'pcase))
(require 'mm-view)
(require 'message)
(require 'mm-decode)
@ -429,8 +432,7 @@ parsing fails."
(setq p-name (replace-regexp-in-string "\\\\" "" p-name))
;; Outer single and double quotes, which might be nested.
(loop
with start-of-loop
(cl-loop with start-of-loop
do (setq start-of-loop p-name)
when (string-match "^\"\\(.*\\)\"$" p-name)
@ -573,13 +575,13 @@ message at DEPTH in the current thread."
;; Recurse on sub-parts
(let ((ctype (notmuch-split-content-type
(downcase (plist-get part :content-type)))))
(cond ((equal (first ctype) "multipart")
(cond ((equal (car ctype) "multipart")
(mapc (apply-partially #'notmuch-show--register-cids msg)
(plist-get part :content)))
((equal ctype '("message" "rfc822"))
(notmuch-show--register-cids
msg
(first (plist-get (first (plist-get part :content)) :body)))))))
(car (plist-get (car (plist-get part :content)) :body)))))))
(defun notmuch-show--get-cid-content (cid)
"Return a list (CID-content content-type) or nil.
@ -590,8 +592,8 @@ enclosing angle brackets, a cid: prefix, or URL encoding. This
will return nil if the CID is unknown or cannot be retrieved."
(let ((descriptor (cdr (assoc cid notmuch-show--cids))))
(when descriptor
(let* ((msg (first descriptor))
(part (second descriptor))
(let* ((msg (car descriptor))
(part (cadr descriptor))
;; Request caching for this content, as some messages
;; reference the same cid: part many times (hundreds!).
(content (notmuch-get-bodypart-binary
@ -616,8 +618,8 @@ will return nil if the CID is unknown or cannot be retrieved."
(with-current-buffer w3m-current-buffer
(notmuch-show--get-cid-content cid))))
(when content-and-type
(insert (first content-and-type))
(second content-and-type))))
(insert (car content-and-type))
(cadr content-and-type))))
;; MIME part renderers
@ -785,7 +787,7 @@ will return nil if the CID is unknown or cannot be retrieved."
;; is defined before it will be shadowed by the letf below. Otherwise the version
;; in enriched.el may be loaded a bit later and used instead (for the first time).
(require 'enriched)
(letf (((symbol-function 'enriched-decode-display-prop)
(cl-letf (((symbol-function 'enriched-decode-display-prop)
(lambda (start end &optional param) (list start end))))
(notmuch-show-insert-part-*/* msg part content-type nth depth button))))
@ -843,7 +845,7 @@ will return nil if the CID is unknown or cannot be retrieved."
;; shr strips the "cid:" part of URL, but doesn't
;; URL-decode it (see RFC 2392).
(let ((cid (url-unhex-string url)))
(first (notmuch-show--get-cid-content cid))))))
(car (notmuch-show--get-cid-content cid))))))
(shr-insert-document dom)
t))
@ -873,13 +875,14 @@ will return nil if the CID is unknown or cannot be retrieved."
(defun notmuch-show-insert-bodypart-internal (msg part content-type nth depth button)
;; Run the handlers until one of them succeeds.
(loop for handler in (notmuch-show-handlers-for content-type)
(cl-loop for handler in (notmuch-show-handlers-for content-type)
until (condition-case err
(funcall handler msg part content-type nth depth button)
;; Specifying `debug' here lets the debugger run if
;; `debug-on-error' is non-nil.
((debug error)
(insert "!!! Bodypart handler `" (prin1-to-string handler) "' threw an error:\n"
(insert "!!! Bodypart handler `" (prin1-to-string handler)
"' threw an error:\n"
"!!! " (error-message-string err) "\n")
nil))))
@ -907,12 +910,14 @@ will return nil if the CID is unknown or cannot be retrieved."
;; watch out for sticky specs of t, which means all properties are
;; front-sticky/rear-nonsticky.
(notmuch-map-text-property beg end 'front-sticky
(lambda (v) (if (listp v)
(pushnew :notmuch-part v)
(lambda (v)
(if (listp v)
(cl-pushnew :notmuch-part v)
v)))
(notmuch-map-text-property beg end 'rear-nonsticky
(lambda (v) (if (listp v)
(pushnew :notmuch-part v)
(lambda (v)
(if (listp v)
(cl-pushnew :notmuch-part v)
v))))
(defun notmuch-show-lazy-part (part-args button)
@ -941,7 +946,7 @@ will return nil if the CID is unknown or cannot be retrieved."
(indent-rigidly part-beg part-end (* notmuch-show-indent-messages-width depth)))
(goto-char part-end)
(delete-char 1)
(notmuch-show-record-part-information (second part-args)
(notmuch-show-record-part-information (cadr part-args)
(button-start button)
part-end)
;; Create the overlay. If the lazy-part turned out to be empty/not
@ -1037,7 +1042,7 @@ is t, hide the part initially and show the button."
;; Register all content IDs for this message. According to RFC
;; 2392, content IDs are *global*, but it's okay if an MUA treats
;; them as only global within a message.
(notmuch-show--register-cids msg (first body))
(notmuch-show--register-cids msg (car body))
(mapc (lambda (part) (notmuch-show-insert-bodypart msg part depth)) body))
@ -1220,13 +1225,13 @@ buttons for a corresponding notmuch search."
(url-unhex-string (match-string 0 mid-cid)))))
(push (list (match-beginning 0) (match-end 0)
(notmuch-id-to-query mid)) links)))
(dolist (link links)
(pcase-dolist (`(,beg ,end ,link) links)
;; Remove the overlay created by goto-address-mode
(remove-overlays (first link) (second link) 'goto-address t)
(make-text-button (first link) (second link)
(remove-overlays beg end 'goto-address t)
(make-text-button beg end
:type 'notmuch-button-type
'action `(lambda (arg)
(notmuch-show ,(third link) current-prefix-arg))
(notmuch-show ,link current-prefix-arg))
'follow-link t
'help-echo "Mouse-1, RET: search for this message"
'face goto-address-mail-face)))))
@ -1387,7 +1392,7 @@ This includes:
(defun notmuch-show-goto-message (msg-id)
"Go to message with msg-id."
(goto-char (point-min))
(unless (loop if (string= msg-id (notmuch-show-get-message-id))
(unless (cl-loop if (string= msg-id (notmuch-show-get-message-id))
return t
until (not (notmuch-show-goto-message-next)))
(goto-char (point-min))
@ -1406,7 +1411,7 @@ This includes:
;; Open those that were open.
(goto-char (point-min))
(loop do (notmuch-show-message-visible (notmuch-show-get-message-properties)
(cl-loop do (notmuch-show-message-visible (notmuch-show-get-message-properties)
(member (notmuch-show-get-message-id) open))
until (not (notmuch-show-goto-message-next)))
@ -1620,7 +1625,7 @@ of the current message."
effects."
(save-excursion
(goto-char (point-min))
(loop do (funcall function)
(cl-loop do (funcall function)
while (notmuch-show-goto-message-next))))
;; Functions relating to the visibility of messages and their
@ -2177,7 +2182,7 @@ argument, hide all of the messages."
(interactive)
(save-excursion
(goto-char (point-min))
(loop do (notmuch-show-message-visible (notmuch-show-get-message-properties)
(cl-loop do (notmuch-show-message-visible (notmuch-show-get-message-properties)
(not current-prefix-arg))
until (not (notmuch-show-goto-message-next))))
(force-window-update))

View file

@ -24,8 +24,12 @@
;;; Code:
;;
(require 'cl)
(require 'cl-lib)
(eval-when-compile
(require 'pcase))
(require 'crm)
(require 'notmuch-lib)
(declare-function notmuch-search-tag "notmuch" tag-changes)
@ -277,7 +281,7 @@ This can be used with `notmuch-tag-format-image-data'."
(save-match-data
;; Don't use assoc-default since there's no way to distinguish a
;; missing key from a present key with a null cdr.
(assoc* tag format-alist
(cl-assoc tag format-alist
:test (lambda (tag key)
(and (eq (string-match key tag) 0)
(= (match-end 0) (length tag)))))))
@ -315,7 +319,7 @@ changed (the normal case) are shown using formats from
(formatted-tag (gethash (cons tag tag-state) notmuch-tag--format-cache 'missing)))
(when (eq formatted-tag 'missing)
(let ((base (notmuch-tag--get-formats tag notmuch-tag-formats))
(over (case tag-state
(over (cl-case tag-state
(deleted (notmuch-tag--get-formats
tag notmuch-tag-deleted-formats))
(added (notmuch-tag--get-formats
@ -436,7 +440,7 @@ from TAGS if present."
(dolist (tag-change tag-changes)
(let ((op (string-to-char tag-change))
(tag (unless (string= tag-change "") (substring tag-change 1))))
(case op
(cl-case op
(?+ (unless (member tag result-tags)
(push tag result-tags)))
(?- (setq result-tags (delete tag result-tags)))
@ -511,22 +515,21 @@ and vice versa."
;; REVERSE is specified.
(interactive "P")
(let (action-map)
(dolist (binding notmuch-tagging-keys)
(let* ((tag-function (case major-mode
(pcase-dolist (`(,key ,tag ,name) notmuch-tagging-keys)
(let* ((tag-function (cl-case major-mode
(notmuch-search-mode #'notmuch-search-tag)
(notmuch-show-mode #'notmuch-show-tag)
(notmuch-tree-mode #'notmuch-tree-tag)))
(key (first binding))
(forward-tag-change (if (symbolp (second binding))
(symbol-value (second binding))
(second binding)))
(tag (if (symbolp tag)
(symbol-value tag)
tag))
(tag-change (if reverse
(notmuch-tag-change-list forward-tag-change 't)
forward-tag-change))
(name (or (and (not (string= (third binding) ""))
(third binding))
(and (symbolp (second binding))
(symbol-name (second binding)))))
(notmuch-tag-change-list tag 't)
tag))
(name (or (and (not (string= name ""))
name)
(and (symbolp name)
(symbol-name name))))
(name-string (if name
(if reverse (concat "Reverse " name)
name)
@ -546,7 +549,3 @@ and vice versa."
;;
(provide 'notmuch-tag)
;; Local Variables:
;; byte-compile-warnings: (not cl-functions)
;; End:

View file

@ -24,6 +24,8 @@
;;; Code:
(eval-when-compile (require 'cl-lib))
(require 'mail-parse)
(require 'notmuch-lib)
@ -32,7 +34,6 @@
(require 'notmuch-tag)
(require 'notmuch-parser)
(eval-when-compile (require 'cl))
(declare-function notmuch-search "notmuch" (&optional query oldest-first target-thread target-line))
(declare-function notmuch-call-notmuch-process "notmuch" (&rest args))
(declare-function notmuch-read-query "notmuch" (prompt))
@ -721,7 +722,7 @@ found or nil if not."
and call FUNCTION for side effects."
(save-excursion
(notmuch-tree-thread-top)
(loop collect (funcall function)
(cl-loop collect (funcall function)
do (forward-line)
while (and (notmuch-tree-get-message-properties)
(not (notmuch-tree-get-prop :first))))))
@ -905,10 +906,11 @@ message together with all its descendents."
(defun notmuch-tree-insert-thread (thread depth tree-status)
"Insert the collection of sibling sub-threads THREAD at depth DEPTH in the current forest."
(let ((n (length thread)))
(loop for tree in thread
(cl-loop for tree in thread
for count from 1 to n
do (notmuch-tree-insert-tree tree depth tree-status (eq count 1) (eq count n)))))
do (notmuch-tree-insert-tree tree depth tree-status
(eq count 1)
(eq count n)))))
(defun notmuch-tree-insert-forest-thread (forest-thread)
"Insert a single complete thread."

View file

@ -65,7 +65,8 @@
;;
;;; Code:
(eval-when-compile (require 'cl))
(eval-when-compile (require 'cl-lib))
(require 'mm-view)
(require 'message)
@ -132,7 +133,7 @@ there will be called at other points of notmuch execution."
(or (equal (car disposition) "attachment")
(and (equal (car disposition) "inline")
(assq 'filename disposition)))
(incf count))))
(cl-incf count))))
mm-handle)
count))
@ -429,8 +430,7 @@ character position of the beginning of each result that overlaps
the region between points BEG and END. As a special case, if (=
BEG END), FN will be applied to the result containing point
BEG."
(lexical-let ((pos (notmuch-search-result-beginning beg))
(let ((pos (notmuch-search-result-beginning beg))
;; End must be a marker in case fn changes the
;; text.
(end (copy-marker end))
@ -478,10 +478,10 @@ is nil, include both matched and unmatched messages. If there are
no messages in the region then return nil."
(let ((query-list nil) (all (not only-matched)))
(dolist (queries (notmuch-search-properties-in-region :query beg end))
(when (first queries)
(push (first queries) query-list))
(when (and all (second queries))
(push (second queries) query-list)))
(when (car queries)
(push (car queries) query-list))
(when (and all (cadr queries))
(push (cadr queries) query-list)))
(when query-list
(concat "(" (mapconcat 'identity query-list ") or (") ")"))))
@ -568,12 +568,11 @@ thread."
"Prompt for tag changes for the current thread or region.
Returns (TAG-CHANGES REGION-BEGIN REGION-END)."
(let* ((region (notmuch-interactive-region))
(beg (first region)) (end (second region))
(prompt (if (= beg end) "Tag thread" "Tag region")))
(cons (notmuch-read-tag-changes
(notmuch-search-get-tags-region beg end) prompt initial-input)
region)))
(pcase-let ((`(,beg ,end) (notmuch-interactive-region)))
(list (notmuch-read-tag-changes (notmuch-search-get-tags-region beg end)
(if (= beg end) "Tag thread" "Tag region")
initial-input)
beg end)))
(defun notmuch-search-tag (tag-changes &optional beg end only-matched)
"Change tags for the currently selected thread or region.
@ -891,8 +890,9 @@ See `notmuch-tag' for information on the format of TAG-CHANGES."
(let* ((saved-search
(let (longest
(longest-length 0))
(loop for tuple in notmuch-saved-searches
if (let ((quoted-query (regexp-quote (notmuch-saved-search-get tuple :query))))
(cl-loop for tuple in notmuch-saved-searches
if (let ((quoted-query
(regexp-quote (notmuch-saved-search-get tuple :query))))
(and (string-match (concat "^" quoted-query) query)
(> (length (match-string 0 query))
longest-length)))
@ -917,7 +917,7 @@ See `notmuch-tag' for information on the format of TAG-CHANGES."
"Read a notmuch-query from the minibuffer with completion.
PROMPT is the string to prompt with."
(lexical-let*
(let*
((all-tags
(mapcar (lambda (tag) (notmuch-escape-boolean-term tag))
(process-lines notmuch-command "search" "--output=tags" "*")))
@ -928,7 +928,7 @@ PROMPT is the string to prompt with."
(mapcar (lambda (tag) (concat "is:" tag)) all-tags)
(mapcar (lambda (mimetype) (concat "mimetype:" mimetype)) (mailcap-mime-types)))))
(let ((keymap (copy-keymap minibuffer-local-map))
(current-query (case major-mode
(current-query (cl-case major-mode
(notmuch-search-mode (notmuch-search-get-query))
(notmuch-show-mode (notmuch-show-get-query))
(notmuch-tree-mode (notmuch-tree-get-query))))
@ -1114,7 +1114,7 @@ notmuch buffers exist, run `notmuch'."
(bury-buffer))
;; Find the first notmuch buffer.
(setq first (loop for buffer in (buffer-list)
(setq first (cl-loop for buffer in (buffer-list)
if (notmuch-interesting-buffer buffer)
return buffer))

View file

@ -177,7 +177,7 @@ test_emacs "(let ((notmuch-command \"$PWD/notmuch_fail\"))
(let ((inhibit-read-only t)) (erase-buffer)))
(condition-case err
(notmuch-show \"*\")
(error (message \"%s\" (second err))))
(error (message \"%s\" (cadr err))))
(notmuch-test-wait)
(with-current-buffer \"*Messages*\"
(test-output \"MESSAGES\"))

View file

@ -1,3 +1,4 @@
(require 'cl-lib)
(require 'notmuch-mua)
(defun attachment-check-test (&optional fn)
@ -12,7 +13,8 @@ Return `t' if the message would be sent, otherwise `nil'"
(condition-case nil
;; Force `y-or-n-p' to always return `nil', as if the user
;; pressed "n".
(letf (((symbol-function 'y-or-n-p) (lambda (&rest args) nil)))
(cl-letf (((symbol-function 'y-or-n-p)
(lambda (&rest args) nil)))
(notmuch-mua-attachment-check)
t)
('error nil))

View file

@ -20,7 +20,7 @@
;;
;; Authors: Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
(require 'cl) ;; This code is generally used uncompiled.
(require 'cl-lib)
;; `read-file-name' by default uses `completing-read' function to read
;; user input. It does not respect `standard-input' variable which we
@ -116,7 +116,7 @@ nothing."
(defadvice notmuch-search-process-filter (around pessimal activate disable)
"Feed notmuch-search-process-filter one character at a time."
(let ((string (ad-get-arg 1)))
(loop for char across string
(cl-loop for char across string
do (progn
(ad-set-arg 1 (char-to-string char))
ad-do-it))))
@ -162,7 +162,7 @@ nothing."
;; reporting differing elements of OUTPUT and EXPECTED
;; pairwise. This is expected to make analysis of failures
;; simpler.
(apply #'concat (loop for o in output
(apply #'concat (cl-loop for o in output
for e in expected
if (not (equal o e))
collect (notmuch-test-report-unexpected o e))))