We would like to bind prefix-arg RET in search view to "pick show this
thread" (i.e. notmuch-pick-from-search-thread). It is not easy to do
this cleanly from contrib so I have been using M-RET instead.
Temporarily remove this functionality in preparation for entering
mainline and binding to prefix-arg RET.
In pick the user has the option of showing the selected message in a
subpane (the message pane) or in the full frame. This is customisable
using the variable notmuch-pick-show-out. At the moment RET is bound
to the default option and M-RET the other option. This is
messy and involves tricks to make sure the keymap is setup at the
right time.
This changes this to prefix-arg RET for the other option which
simplifies the code and makes things cleaner.
Previously this function used a temporary variable to store the return
value but we can just use the return value of the cond statement
directly.
The only tiny subtlety is that in one case (subject) we need to
slightly reorder the logic to make sure the formatted-field is the
last thing computed.
This function was used for pick entry from hello but isn't needed
anymore. It was modelled on notmuch-hello-search which is now only
used non-interactively (and notmuch-pick does now add to the
recent-search history correctly).
Pick adds some keybindings to keymaps for other modes (for entry to
pick). These quoted the keymaps which appears to be unnecessary and to
rely on the fact that these keymaps have the same entry in the
function cell as the value cell (perhaps for historical reasons?)
Remove these quotes.
Previously the box graphics in the pick view were always attached to
the subject. Make them a field in their own right. We use the
recursive insert to change the default notmuch-pick-result-format so
that the user view does not change. (The subject touches the tree box
graphics but the next column (tags) is still vertically aligned.)
Previously, the message format was fixed: each part had to be a
certain width and either left or right justified. This allows the user
to specify that two parts can be variable width but that combined they
should be some fixed width. We do this by allowing the user to set as
a "field" a list of the normal result-format form which is formatted
and then itself inserted according to the format string specified.
This means all existing formats work but allows more general things
too. This will be used in the next patch to allow the user to specify
where the tree box graphics are drawn but allow, e.g., the total width
of the tree box graphics and subject to be specified.
This moves the actual insertion of message fields up from the field
formatting function into the message insertion function. This will be
useful in the next patch as we can apply further formatting to the
insertion string before inserting.
Dating back to the earliest notmuch-pick we have not printed anything
for the tag field for a message with no tags. This is inconsistent
with search and show both of which print "()". Change pick to be
consistent.
Austin recently introduced a new global keymap. This makes pick use
this global map.
In most cases pick needs to override this global map because
it wants to close the message pane before doing the action. However,
this documents the over-rides and makes it less likely that the pick
bindings will get out of sync with the main bindings.
pick was meant to use the same mini-buffer history but this failed
because the interactive definition took place before the use search
mini-buffer history part. Remove the interactive prompt to ensure the
correct history is used.
In the recent changes for search order handling the default-value of
notmuch-search-oldest-first was used. However, default-value needs a
symbol so the symbol-name needs to be quoted.
This missing quote was causing strange sort-orders in some cases.
As explained by Jeffrey Stedfast, the author of GMime, quoted in [1]:
> Passing the GMIME_ENABLE_RFC2047_WORKAROUNDS flag to g_mime_init()
> *should* solve the decoding problem mentioned in the thread. This
> flag should be safe to pass into g_mime_init() without any bad side
> effects and my unit tests do test that code-path.
The thread being referred to is [2].
[1] id:87bo56viyo.fsf@nikula.org
[2] id:08cb1dcd-c5db-4e33-8b09-7730cb3d59a2@gmail.com
Some common broken RFC 2047 encodings that we currently let gmime
parse strictly. We could tell gmime to be forgiving in what it accepts
as RFC 2047 encoding, making these tests pass.
The only user-visible effect of this should be that "G" now works in
show mode (previously it was unbound for no apparent reason).
This shared keymap gives us one place to put global commands, which
both forces us to think about what commands should be global, and
ensures their bindings can't diverge (like the missing "G" in show).
This converts notmuch-help to use map-keymap for all keymap traversal.
This generally cleans up and simplifies construction of keymap
documentation, and also makes notmuch-help support anything that can
be in a keymap, including more esoteric stuff like multiple
inheritance.
This unifies the various refresh and poll-and-refresh functions we
have for different modes. Now all modes bind "=" and "G" (except
show, which doesn't bind "G" for some reason) to
`notmuch-refresh-this-buffer' and
`notmuch-poll-and-refresh-this-buffer', respectively.
Since notmuch-hello doesn't need this any more, we can remove this
hack. This also eliminates `notmuch-search-quit', so now all modes
bind "q" to `notmuch-kill-this-buffer'.
Since there is now no difference between notmuch-hello-search and
notmuch-search when called interactively, bind "s" to notmuch-search
in notmuch-hello-mode-map. Now all modes bind "s" this way.
Previously, we refreshed hello when the user quit a search that was
started from hello. This is fine assuming purely stack-oriented
buffer use, but is quite fragile and requires hacks to search.
This replaces that logic with a new approach that refreshes hello
whenever the user switches to the hello buffer, regardless of how this
happens.
Previously, if `notmuch-search' was called interactively (bound to "s"
in search and show, but not hello), it would always use newest-first.
However, `notmuch-hello-search' (bound to "s" in hello) and
`notmuch-hello-widget-search` would call it with the user-configured
sort order. This inconsistency seems unintentional, so change
`notmuch-search' to use the user-configured sort order when called
interactively.
When text/html parts include images as multipart/related and the
text/plain alternative is used these images can be completely hidden
with no easy way to access them or even find out that they are there.
Make notmuch-show-insert-part-multipart/related add buttons for all
parts, the first one visible the rest hidden.
The lazy part handler had a bug that it allowed the button to be
toggled to be specified. During toggling it needs to save and restore
the text-properties for the button but it actually saved the text
properties at point rather than from the button.
In almost all cases this didn't matter as as point had the same text
properties as the button. However, it is a bug and did cause incorrect
behaviour in some cases: see id:87txhz14z6.fsf@qmul.ac.uk for details.
This patch fixes three issues with "notmuch-mutt tag":
1. The message_id was not shell quoted.
Thanks to Jason Miller for the bug report and patch.
2. The tags passed into tag_action() were not being properly quoted.
The "join before shell_quote" was combining multiple tags into a
single argument to notmuch tag: '+one -two -three' instead of
'+one' '-two' '-three'.
3. A "--" was added between the tags and search-term as shown in the
current notmuch-tag man page.
Thanks to Tomi Ollila for suggesting the simple fix of using
the list form of system(), which bypasses the shell.
When 'xpg_echo' bash shell option is unset (usually the default)
echo builtin does not expand backslash-escape sequences by default
(i.e. '\n' is echoed as '\n' instead of newline). Not all bash
installations have this feature we depend on activated by default.
Note that the feature is bash (and GNU /bin/echo) specific. It is used
as it is convenient. If portability is needed (elsewhere) use printf(1)
(also often available as a shell builtin).
Change notmuch-mutt to use the new --duplicate=1 flag for duplicate
removal. This will remove duplicates based on message-id at the
notmuch level. Previously we were using fdupes or generating sha sums
after the search.
This version will be faster, but will enable the possibility of hiding
search results due to accidental/malicious duplicate message-ids.
When composing a reply, notmuch-mua-reply attempts to cite the
the original message by inserting it before the user signature, if
one is present. The existing method used to search the signature
separator backward from the end of the buffer and then move one
line up. In case of variable `message-signature-insert-empty-line'
being nil this caused point to go to the beginning of
'--text follows this line--'
separator line, and citation was inserted there.
This change checks the value of `message-signature-insert-empty-line'
and doesn't move point if that is nil. Additional narrowing to
the body region ensures that point never goes to the separator line
(or beyond).
`message-signature-setup-hook' or `message-setup-hook' may already have
added some other content to the message body, therefore using simply
(message-goto-body) to move point to the beginning of body might lead
to unexpected results.
Original patch from "Geoffrey H. Ferrari", continued with iterations
from Jani and Mark.
If any of the tests in our test system is not passing the execution
of the test suite completes with nonzero exit value.
It is better to rely on the exit value of the test system instead
of some arbitrary strings in test output (or use both).
In reply, insert quotable parts using notmuch-show-insert-bodypart
instead of calling notmuch-mm-display-part-inline directly to render
the quoted parts as they are rendered in show view.
We use a temp buffer to not leak text properties from the show
renderer into the reply. This way we also don't need to worry about
narrowing or point placement. Credits to Mark Walters
<markwalters1009@gmail.com> and Austin Clements <amdragon@MIT.EDU> for
getting this part straight.
The notable change is that replies to text/calendar parts quote the
pretty printed output of icalendar-import-buffer rather than the ugly
raw vcalendar.
notmuch_message_tags_to_maildir_flags() unconditionally moves messages from
maildir directory "new/" to maildir directory "cur/", which makes messages lose
their "new" status in the MUA. However some users want to keep this "new"
status after, for instance, an auto-tagging of new messages.
However, as Austin mentioned and according to the maildir specification,
messages living in "new/" are not allowed to have flags, even if mutt allows it
to happen. For this reason, this patch prevents moving messages from "new/" to
"cur/", only if no flags have to be changed. It's hopefully enough to satisfy
mutt (and maybe other MUAs showing the "new" status) users checking the "new"
status.
Changelog:
* v2: Fix bool type as well as NULL returned despite having no errors (Austin
Clements)
* v4: Tag the related test (contributed by Michal Sojka) as working
Signed-off-by: Louis Rilling <l.rilling@av7.net>
[Condition for keeping messages in new/ was extended to satisfy all
tests from the previous patch. -Michal Sojka]
[Added by David Bremner, to keep the tests passing at each commit]
update insert tests for new maildir synchronization rules
As of id:1355952747-27350-4-git-send-email-sojkam1@fel.cvut.cz
we are more conservative about moving messages from ./new to ./cur.
This updates the insert tests to match
As mentioned by Jani Nikula in id:87vcccp4y3.fsf@nikula.org, some cases
of maildir synchronization are not covered by our tests. Let's add the
missing tests.
Some MUA's like mutt show the difference between "new" emails living in maildir
directory new/, and "old" emails living in maildir directory cur/. However
notmuch tag unconditionally moves selected messages from new/ to cur/, even if
no maildir synchronized tag is changed.
While maildir specification forbids messages with tags living in new/, there is
no need to move messages to cur/ when no maildir synchronized tag is changed.
Thus notmuch can remain transparent with respect to other MUA's.
[ Edited commit log to better describe the intended changes, and tag the
test as broken until the actual changes are implemented -- Louis Rilling ]
Signed-off-by: Louis Rilling <l.rilling@av7.net>
[ Converted to use test_subtest_known_broken, David Bremner ]
This variable is essentially unused: it was only used for making sure
it itself got reset after a refresh of the buffer.
It did this by passing an unnecessary argument to notmuch-pick-worker
so remove that too.
This adds functions to go to the previous or next thread to
pick. Prev-thread behaves similarly to prev-message in show: if you
are on the top line of a thread it will go to the top of the previous
thread, otherwise it will go to the top of the current thread. Next
thread will always go to the top of the next thread (or the end of
buffer). These are bound to "M-p" and "M-n" by default (matching the
bindings in show).
Previously pick had no actions based on the entire thread: this adds
some. Note in this version '*' is bound to `tag thread' which is not
consistent with search or show. However it still might be the most
natural thing (as it is similar to running * in the show pane).
Previously notmuch-pick had no thread based functionality. This adds a
macro to iterate through all messages in a thread. To simplify this it
adds a text-property marker to the first message of each thread.
Long story short, fix build on recent (3.2+) clang.
The long story for posterity follows.
gcc 4.6 added new warnings about structs with greater visibility than
their fields. The warnings were silenced by adjusting visibility in
commit d5523ead90
Author: Carl Worth <cworth@cworth.org>
Date: Wed May 11 13:23:13 2011 -0700
Mark some structures in the library interface with visibility=default attribute.
Later on,
commit 3b76adf9e2
Author: Austin Clements <amdragon@MIT.EDU>
Date: Sat Jan 14 19:17:33 2012 -0500
lib: Add support for automatically excluding tags from queries
changed visibility of struct _notmuch_string_list for the same reason, and
commit 1a53f9f116
Author: Mark Walters <markwalters1009@gmail.com>
Date: Thu Mar 1 22:30:38 2012 +0000
lib: Add the exclude flag to notmuch_query_search_threads
split the struct _notmuch_string_list and its typedef
notmuch_string_list_t as a way to make a forward declaration for
_notmuch_thread_create().
The subtle difference was that the struct definition now had 'visible'
in it, while the typedef didn't, and it was within the #pragma GCC
visibility push(hidden) block. This went unnoticed, as the then common
versions of clang didn't care about this.
A later change in clang (I did not dig into when this change was
introduced) caused the following error:
CXX -O2 lib/database.o
In file included from lib/database.cc:21:
In file included from ./lib/database-private.h:33:
./lib/notmuch-private.h:479:8: error: visibility does not match previous declaration
struct visible _notmuch_string_list {
^
./lib/notmuch-private.h:67:33: note: expanded from macro 'visible'
^
./lib/notmuch-private.h:52:13: note: previous attribute is here
^
1 error generated.
make: *** [lib/database.o] Error 1
This is slightly misleading due to the reference to the #pragma. The
real culprit is the typedef within the #pragma.
We could just add 'visible' to the typedef, or move the typedef
outside of the #pragma, and be done with it, but juggle the
declarations a bit to accommodate moving the typedef back with the
struct, and keep the visibility attribute in one place.
The problem was originally reported by Simonas Kazlauskas
<s@kazlauskas.me> in id:20130418102507.GA23688@godbox but I was only
able to reproduce and investigate now that I upgraded clang.
