This encodes the library version into the library, where the linking
binary can pick it up, and the linker can even enforce mismatches in
the minor release, (such as linking a binary against version 1.2 and
then attempting to run it against version 1.1).
I'm not sure which system Aaron used, but on the machine I have access
to, (Darwin 8.11.0), the -shared and -dylib_install_name options are
not recognized. Instead I use -dynamic_lib and -install_name as
documented here:
http://www.finkproject.org/doc/porting/shared.php
This patch adds a configure check for OS X (actually Darwin),
and sets up the Makefiles to build a proper shared library on
that platform.
Signed-off-by: Aaron Ecay <aaronecay@gmail.com>
While all systems that I have access to support strcasestr, it is
in fact not part of POSIX. So here's a fallback reimplementation
based on POSIX functions.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Tested-by: Tomas Carnecky <tom@dbservice.com> (on OpenSolaris snv_134)
The recent change to include sub-directory Makefile.local files
before the top-level Makefile.local means that we need to include
the Makefile.config before those. So move it up from Makefile.local
to Makefile.
Must set extra_c(xx)flags before including subdir Makefile.local's,
so that there is a blank slate that the subdirs can add on to.
Must include subdir Makefile.local's before global one, otherwise
the compat sources are not added to the list of those to be
compiled.
Signed-off-by: Aaron Ecay <aaronecay@gmail.com>
Since the binaries contain C++ code, it is necessary to use the C++
linker, or errors result on some platforms (OS X).
Signed-off-by: Aaron Ecay <aaronecay@gmail.com>
Clean up code duplication, as per Carl's suggestion, by making
notmuch-search-{add/remove}-tag-thread a special case of the -region
commands, where the region in question is between (point) and (point).
There was a bug in notmuch-search-{add,remove}-tag-region, which would
not behave correctly if the region went beyond the last message. Now,
instead of simply iterating to the last line of the region, these
functions will iterate to the minimum of the last line of the region
and the last possible line, i.e.
(- (line-number-at-pos (point-max)) 2)
Tested-by: Carl Worth <cworth@cworth.org> Note that the old, buggy
behavior included infinite loops of emacs lisp code, so the new
behavior is significantly better than that.
When headers contain non-ASCII characters, they are encoded according
to rfc2047. Nomtuch reply command emits the headers in the encoded
form, which makes them hard to read by humans who compose the reply.
For example instead of "Subject: Re: Rozlučka" one currently sees
"Subject: Re: =?iso-8859-2?q?Rozlu=E8ka?=".
This patch adds a new GMime filter which is used to decode headers to
UTF-8 and uses this filter when notmuch reply outputs headers.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Put single-quotes around the argument of the `show --entire-thread' command
in notmuch-show. This change should have no effect on normal usage.
However, it allows us to use the notmuch.el client with a remote notmuch
binary and database over ssh (by, e.g., setting `notmuch-command' to a
simple shell script). Without the quotes, ssh will not send the command
properly.
One very simple example script is as follows. (Note that it requires
keypair login to the ssh server.)
#!/bin/sh
SSH_BIN="/path/to/local/ssh"
NOTMUCH_HOST="my.remote.server"
NOTMUCH_REMOTE_PATH="/path/to/remote/notmuch"
$SSH_BIN $NOTMUCH_HOST $NOTMUCH_REMOTE_PATH $@
notmuch previously unconditionally checked mime parts for various
properties, but not for NULL, which is the case if libgmime encounters
an empty mime part.
Upon encounter of an empty mime part, the following is printed to
stderr (the second line due to my patch):
(process:17197): gmime-CRITICAL **: g_mime_message_get_mime_part: assertion `GMIME_IS_MESSAGE (message)' failed
Warning: Not indexing empty mime part.
This is probably a bug that should get addressed in libgmime, but for
not, my patch is an acceptable workaround.
Signed-off-by: martin f. krafft <madduck@madduck.net>
When Ctrl-C is pressed in a wrong time during notmuch new, it can lead
to removal of messages from the database even if the files were not
removed.
It happened at least once to me.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Reviewed-by: Carl Worth <cworth@cworth.org>:
The original proposal for having different open modes used the name
WRITABLE. I didn't like that name, (easy to misspell as WRITEABLE even
for native English speakers). So we renamed it to READ_WRITE
immediately, but apparently some of the documentation held the old
name for a while.
The recent fix to handle utf8 in the JSON output is the kind of bug
I'd never like to see again, (so that I'd like the test suite to be
helping us track that).
The current code in json_quote_str() only accepts strict printable ASCII
code points (i.e. 32-127), all other code points are dropped from the
JSON output. The code is attempting to drop only non-printable ASCII
characters, but doing a signed comparison of the byte value is also
dropping characters with values >= 128.
This patch uses an unsigned comparison to accept code points 32-255.
Reviewed-by: Carl Worth <cworth@cworth.org> (with some additional
details for commit message).
Previously, we were only adding the reference terms for cases where
the referenced message did not yet exist in the database. For thread
presentation, it's useful to have the connection information provided
by the references, even when the messages are present. So add this
term unconditionally.
This function was recently modified, (to include a metadata lookup for
a message's thread ID before looking for parent/child thread IDs), but
the documentation wasn't updated. Fix that.
There are two primary cases in this function, (the message exists in
the database or it does not). Previously the code for these two cases
was split and intermingled with goto-spaghetti connections.
This allows us to thread messages even when we receive them out of
order, or never receive the root.
The thread ids for messages that aren't present but are referred to are
stored as metadata in the database and then retrieved if we ever get
that message.
When determining the thread id for a message we also check for this
metadata so that we can thread descendants of a message together before
we receive it.
Edited by Carl Worth <cworth@cworth.org>: Split this portion of the
commit from the earlier-applied portion adding test cases.
These new tests demonstrate a bug as follows:
Multiple messages are added to the database
All of these message references a common parent
The parent message does not exist in the databas
In this scenario, the messages will not be recognized as belonging to
the same thread. We consider this a bug, and the new tests treat this
as a failure.
Edited by Carl Worth <cworth@cworth.org>: Split these tests into their
own commit (before the fix of the bug). This lets me see the actual
failure in the test suite, before the fix is applied. Also fix the
alignment of new messages from test suite, (so that the PASS portions
all line up---which is important while we're still manually verifying
test-suite results).
I often have several versions of notmuch compiled and it would be very
helpful to be able to distinguish between them. Git has a very nice
feature to make intermediate numbering automatic and unambiguous so
let's use it here.
For tagged versions, the version is the name of the tag, for
intermediate versions, the unique ID of the commit is appended to the
tag name.
When notmuch is compiled from a release tarball, there is no git
repository and therefore the tarball contains a special file 'version',
which contains the version of release tarball.
To create a new release one has to run 'make release VERSION=X.Y'.
From both the implementation and from the documentation. This is
handled generically in the library for all search-based commands,
so count doesn't need special treatment.
This seems like a generally useful thing to support, (but the previous
support through an empty string was not convenient for some users,
(such as the command-line client).
If no parameters are given to notmuch-count, or just '' or '*' are
given, return the total number of messages in the database.
update notmuch count help
The previous code made too many assumptions about the (sadly not
standardized) format of the Received headers. This version should
be more robust to deal with different variations.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
These commands act on all messages in the thread, not simply those
that match the search. (There are use case for both behaviors, but the
documentation must match the behavior that's actually implemented).
This patch adds `-region' versions of the `notmuch-search-' commands to find
properties. It also splits up `notmuch-add/remove-tags' into both a
`-thread' and a `-region' version. (This makes us modify
`notmuch-search-archive-thread' to use the
`notmuch-search-remove-tag-thread' function, instead of
`notmuch-search-remove-tag', for consistency.) The add/remove-tag command
called by pressing `+' or `-' will then choose accordingly, based on whether
region is active.
This version fixes a couple of errors in the first version, which led to
incorrect marking of some tags in the search view (though the actual
tagging was still correct). It's also based on current master.
I'm not sure any more if region selection is actually the correct way to
do this, or if a mutt-style message-marking method would be better. But
I didn't want a buggy incorrect version out there.
As put forth in the commit that enabled this functionality, the last
few lines of a citation are often much more important. In that case,
let's actually do the useful thing by default.
In many conversations the last few lines of a citation are more
interesting than the first few lines, hence allow those to be shown if
desired.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Arbitrary font faces can be specified for given thread tags. By
default, no coloring is applied. To specify coloring, place something
like this in your .emacs:
(setq notmuch-search-line-faces '(("delete" . '(:foreground "red"))
("unread" . '(:foreground "green"))))
Order matters: line faces listed first will take precedence (in the
example above, a thread tagged both "delete" and "unread" will be
colored red, since the "delete" face is listed before the "unread").
notmuch.el | 33 ++++++++++++++++++++++++++++++++-
1 files changed, 32 insertions(+), 1 deletions(-)
Change the buffer name to a uniquified subject of the thread (i.e. the
subject of the first message in the thread) instead of the thread-id. This
is more meaningful to the user, and will make it easier to scroll through
numerous open buffers.
Note that this patch adds an optional `buffer-name' argument to notmuch
show.
Signed-off-by: Jesse Rosenthal <jrosenthal@jhu.edu>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The date was unfairly left out of getting pretty colors in the
notmuch-show header display. This fixes that grave injustice.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
