This is the notmuch_database_create equivalent of the previous change.
In this case, there were places where errors were not being propagated
correctly in notmuch_database_create or in calls to it. These have
been fixed, using the new status value.
It has been a long-standing issue that notmuch_database_open doesn't
return any indication of why it failed. This patch changes its
prototype to return a notmuch_status_t and set an out-argument to the
database itself, like other functions that return both a status and an
object.
In the interest of atomicity, this also updates every use in the CLI
so that notmuch still compiles. Since this patch does not update the
bindings, the Python bindings test fails.
Previously, if we failed to find the message by filename in
remove_filename, we would return immediately from the function without
ending its atomic block. Now this code follows the usual goto DONE
idiom to perform cleanup.
This was going to stdout. I removed the newline at the beginning of
printing the fatal error message because it wouldn't make sense if you
were only looking at the stderr stream (e.g., you had redirected
stdout to /dev/null).
Previously, fatal errors in add_files_recursive were not treated as
fatal by its callers (including itself!). This makes
add_files_recursive errors consistently fatal and updates all callers
to treat them as fatal.
A new configuration key 'new.ignore' is used to determine which
files and directories user wants not to be scanned as new mails.
Mark the corresponding test as no longer broken.
This work merges my previous attempts and Andreas Amann's work
in id:"ylp7hi23mw8.fsf@tyndall.ie"
scandir() returns "strings allocated via malloc(3)" which are then
"collected in array namelist which is allocated via
malloc(3)". Currently we just free the array namelist. Instead, free
all the entries of namelist, and then free namelist.
entry only points to elements of namelist, so we don't free it
separately.
This ignores the results of the two writes in sigint handlers even
harder than before.
While my libc lacks the declarations that trigger these warnings, this
can be tested by adding the following to notmuch.h:
__attribute__((warn_unused_result))
ssize_t write(int fd, const void *buf, size_t count);
Run notmuch new pre and post hooks, named "pre-new" and "post-new", if
present in the notmuch hooks directory. The hooks will be run before and
after incorporating new messages to the database.
Typical use cases for pre-new and post-new hooks are fetching or delivering
new mail to the maildir, and custom tagging of the mail incorporated to the
database.
Also add command line option --no-hooks to notmuch new to bypass the hooks.
Signed-off-by: Jani Nikula <jani@nikula.org>
previously we deleted the subcommand name from argv before passing to
the subcommand. In this version, the deletion is done in the actual
subcommands. Although this causes some duplication of code, it allows
us to be more flexible about how we parse command line arguments in
the subcommand, including possibly using off-the-shelf routines like
getopt_long that expect the name of the command in argv[0].
Previously, the functions notmuch_database_find_message() and
notmuch_database_find_message_by_filename() functions did not properly
report error condition to the library user.
For more information, read the thread on the notmuch mailing list
starting with my mail "id:871uv2unfd.fsf@gmail.com"
Make these functions accept a pointer to 'notmuch_message_t' as argument
and return notmuch_status_t which may be used to check for any error
condition.
restore: Modify for the new notmuch_database_find_message()
new: Modify for the new notmuch_database_find_message_by_filename()
This addresses atomicity of tag synchronization, the last atomicity
problems in notmuch new. Each message add or remove is wrapped in its
own atomic section, so interrupting notmuch new doesn't lose progress.
Because flag synchronization is stateless, it can be performed at any
time as long as it's guaranteed to be performed after any change to a
message's filename list. Take advantage of this to synchronize tags
immediately after a filename is added or removed.
This does not yet make adding or removing a message atomic, but it is
a big step toward atomicity because it reduces the window where the
database tags are inconsistent from nearly the entire notmuch-new to
just around when the message is added or removed.
Previously, file name removal was implemented identically in two
places. Now it's captured in one function.
This is important because file name removal is about to get slightly
more complicated with eager tag synchronization and correct removal
atomicity.
Previously, pointers to these variables were passed around
individually. This was okay when only one function needed them, but
we're about to need them in a few more places.
notmuch_database_t now keeps a nesting count and we only start a
transaction or commit for the outermost atomic section.
Introduces a new error, NOTMUCH_STATUS_UNBALANCED_ATOMIC.
Previously, if notmuch new were interrupted between updating the
directory mtime and handling removals from that directory, a
subsequent notmuch new would not handle those removals until something
else changed in that directory. This defers recording the updated
mtime until after removals are handled to eliminate this problem.
Previously, message removals were always performed, even after a
SIGINT. As a result, when a message was moved from one folder to
another, a SIGINT between processing the directory the message was
removed from and processing the directory it was added to would result
in notmuch removing that message from the database.
Currently, notmuch new assumes any directory with a database mtime of
0 is new, but we don't set the mtime until after processing messages
and subdirectories in that directory. Hence, anything that prevents
the mtime update (such as an interruption or the wall-clock logic
introduced in 8c39e8d6) will cause the next notmuch new to think the
directory is still new.
We work around this by setting the new directory's database mtime to
-1 before scanning anything in the new directory. This also obviates
the need for the workaround used in 8c39e8d6.
This fixes a race where multiple message deliveries in the same second
with an intervening notmuch new could result in messages being ignored
by notmuch (at least, until a later delivery forced a rescan).
Because mtimes only have second granularity, later deliveries in the
same second won't change the directory mtime, and hence won't trigger
notmuch new to rescan the directory. This situation can only occur
when notmuch new is being run at the same second as the directory's
modification time, so simply don't update the saved mtime in this
case.
This very race happens all over the test suite, and is currently
compensated for with increment_mtime (and, occasionally, luck). With
this change, increment_mtime becomes unnecessary.
Various typo fixes in comments within the source code.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
source-code comments, (and fixed fix of "descriptios" to "descriptors"
rather than "descriptions").
gcc (at least as of version 4.6.0) is kind enough to point these out to us,
(when given -Wunused-but-set-variable explicitly or implicitly via -Wunused
or -Wall).
One of these cases was a legitimately unused variable. Two were simply
variables (named ignored) we were assigning only to squelch a warning about
unused function return values. I don't seem to be getting those warnings
even without setting the ignored variable. And the gcc docs. say that the
correct way to squelch that warning is with a cast to (void) anyway.
The most recent commit optimized the implementation of this
function. This commit simply updates the relevant comments to match
the new implementation.
The db_files and db_subdirs are unnecessary for unchanged directories.
maildir with 10000 e-mails:
old version:
$ time ./notmuch new
No new mail.
real 0m0.053s
user 0m0.028s
sys 0m0.026s
new version:
$ time ./notmuch new
No new mail.
real 0m0.032s
user 0m0.009s
sys 0m0.023s
Signed-off-by: Karel Zak <kzak@redhat.com>
Reviewed-by: Austin Clements <amdragon@mit.edu>
Looks good (faster than, but provably equivalent to the original code!
notmuch_directory_get_child_* are side-effect free,
db_files/db_subdirs aren't used between where they were set in the old
code and where they are set in the new code, and db_files/db_subdirs
are initialized to NULL when declared).
Another timing data point:
Old code: ./notmuch new 0.77s user 0.28s system 99% cpu 1.051 total
New code: ./notmuch new 0.09s user 0.27s system 98% cpu 0.368 total
Without this patch, it might happen that the remaining time or processing
rate were calculated just after start where nothing was processed yet.
This resulted into division by a very small number (or zero) and the
printed information was of little value.
Instead of printing nonsenses we print only that the operation is in
progress. The estimates will be printed later, after there is enough data.
notmuch new reports progress only during the "first" phase when the
files on disk are traversed and indexed. After this phase, other
operations like rename detection and maildir flags synchronization are
performed, but the user is not informed about them. Since these
operations can take significant time, we want to inform the user about
them.
This patch enhances the progress reporting facility that was already
present. The timer that triggers reporting is not stopped after the
first phase but continues to run until all operations are finished. The
rename detection and maildir flag synchronization are enhanced to report
their progress.
If there are several tags applied to the new messages, it is beneficial
to store them to the database at one, because it saves some time,
especially when the notmuch new is run for the first time.
This patch decreased the time for initial import from 1h 35m to 1h 14m.
This is a simplified version of a patch originally by Michal Sojka
<sojkam1@fel.cvut.cz> which is designed to have the same performance
benefits. Michal said the following:
When notmuch new is run for the first time, it is not necessary to
defer maildir flags synchronization to later because we already know
that no files will be removed.
Performing the maildinr flag synchronization immediately after the
message is added to the database has the advantage that the message
is likely hot in the disk cache so the synchronization is faster.
Additionally, we also save one database query for each message,
which must be performed when the operation is deferred.
Without this patch, the first notmuch new of 200k messages (3 GB)
took 1h and 46m out of which 20m was maildir flags
synchronization. With this patch, the whole operation took only 1h
and 36m.
Unlike Michal's patch, this version does the deferral for any new
message, rather than doing it only on the first run of "notmuch new".
Previously, we would only scan a directory if the filesystem
modification time was strictly newer than the database modification
time for the directory. This would cause a problem for systems with an
unstable clock, (if a new mail was added to the filesystem, then the
system clock rolled backward, "notmuch new" would not find the message
until the clock caught up and the directory was modified again).
Now, we always scan the directory if the modification time of the
directory is not exactly the same between the filesystem and the
database. This avoids the problem described above even with an
unstable system clock.
When a file in the mailstore is renamed, this appears to "notmuch new"
as both an added file and a removed file (for the same message). We
want the synchronization of the maildir_flags to reflect the final
state, (after the rename is complete). Therefore, it's incorrect to
perform the synchronization immediately after adding a new
file. Instead we queue up these synchronizations (by message ID[*])
and perform them after the removals are complete.
With this change, the "dump/restore" case of the maildir-sync tests,
as well as the recent "remove 'S'" case both now pass where they were
failing before.
Interestingly, the "remove info" test was passing before, but now
fails. This is actually due to a separate bug, (and the bug just fixed
was masking it, by preventing the test from performing as desired).
[*] It's important to queue by message ID---queueing actual message
objects does not work since the message objects will retain stale data
such as the old filenames.
Instead of having an API for setting a library-wide flag for
synchronization (notmuch_database_set_maildir_sync) we instead
implement maildir synchronization with two new library functions:
notmuch_message_maildir_flags_to_tags
and notmuch_message_tags_to_maildir_flags
These functions are nicely documented here, (though the implementation
does not quite match the documentation yet---as plainly evidenced by
the current results of the test suite).
Since the name of the configuration parameter here is:
maildir.synchronize_flags
the convention is that the functions to get and set this parameter
should match it in name. Hence:
notmuch_config_get_maildir_synchronize_flags
etc. (as opposed to notmuch_config_get_maildir_sync).
This adds group [maildir] and key 'synchronize_flags' to the
configuration file. Its value enables (true) or diables (false) the
synchronization between notmuch tags and maildir flags. By default,
the synchronization is disabled.
This patch allows bi-directional synchronization between maildir
flags and certain tags. The flag-to-tag mapping is defined by flag2tag
array.
The synchronization works this way:
1) Whenever notmuch new is executed, the following happens:
o New messages are tagged with configured new_tags.
o For new or renamed messages with maildir info present in the file
name, the tags defined in flag2tag are either added or removed
depending on the flags from the file name.
2) Whenever notmuch tag (or notmuch restore) is executed, a new set of
flags based on the tags is constructed for every message and a new
file name is prepared based on the old file name but with the new
flags. If the flags differs and the old message was in 'new'
directory then this is replaced with 'cur' in the new file name. If
the new and old file names differ, the file is renamed and notmuch
database is updated accordingly.
The rename happens before the database is updated. In case of crash
between rename and database update, the next run of notmuch new
brings the database in sync with the mail store again.
Add a new_tags option in the [messages] section of the configuration
file to allow the user to specify which tags should be added to new
messages by notmuch new.
When Ctrl-C is pressed in a wrong time during notmuch new, it can lead
to removal of messages from the database even if the files were not
removed.
It happened at least once to me.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
We rename 'has_more' to 'valid' so that it can function whether
iterating in a forward or reverse direction. We also rename
'advance' to 'move_to_next' to setup parallel naming with
the proposed functions 'move_to_first', 'move_to_last', and
'move_to_previous'.
Such as reiserfs or xfs. This has been broken since the merge of
support for rename and deletion of files from the mail store.
Here's the original justification for the patch:
A review of notmuch-new.c shows three uses of ->d_type:
Near line 153, in _entries_resemble_maildir() we can simply allow for
DT_UNKNOWN. This would fail if people have MH-style folders which have
three folders called "new" "cur" and "tmp", but that seems unlikely, in
which case the "tmp" folder would simply not be scanned.
Near line 273 in add_files_recursive() we have another check. If
DT_UNKNOWN, we fall through, then add_files_recursive() does a stat
almost immediately, returning with success if the path isn't a
directory.
Thus, the fallback is already written.
Finally, near line 343, in add_files_recursive() (a long function) we
have another check. Here we can simply treat DT_UNKNOWN as DT_LNK, since
the logic for the stat() results are the same.
Previously we were printing a number of messages upgraded so far. The
original motivation for this was to accurately reflect the fact that
there are two passes, (so each message is processed twice and it's not
accurate to represent with a single count). But as it turns out, the
second pass takes zero time (relatively speaking) so we're still not
accounting for it.
If nothing else, the percentage-based reporting makes for a cleaner
API for the progress_notify function.
Our signal handler is designed to quickly flush out changes and then
exit. But if a database upgrade is in progress when the user
interrupts, then we just want to immediately abort. We could do
something fancy like add a return value to our progress_notify
function to allow it to tell the upgrade process to abort. But it's
actually much cleaner and robust to delay the installation of our
signal handler so that the default abort happens on SIGINT.
This takes advantage of the recently added library support to detect
if the database needs to be upgraded and then automatically performs
that upgrade, (with a nice progress report).
Previously, when notmuch detected that a directory had been deleted it
was only removing files immediately in that directory. We now
correctly recurse to also remove any directories (and files, etc.)
within sub-directories, etc.
Previously we had NOTMUCH_DATABASE_MODE_READ_ONLY but
NOTMUCH_STATUS_READONLY_DATABASE which was ugly and confusing. Rename
the latter to NOTMUCH_STATUS_READ_ONLY_DATABASE for consistency.
When we know that we are adding a new directory to the database, (and
we therefore are using inode rather than strcmp-based sorting of the
filenames), then we *never* want to see any names from the
database. If we get any names that could only make us inadvertently
remove files that we just added.
Since it's not obvious from the Xapian documentation whether new terms
being added as part of new documents will appear in the in-progress
all-terms iteration we are using, (and this might differ based on
Xapian backend and also might differ based on how many new directories
are added and whether a flush threshold is reached).
For all of these reasons, we play it safe and use NULL rather than a
real notmuch_filenames_t iterator in this case to avoid any problem.
