Add a new test function to allow simpler testing of emacs
functionality.
`test_emacs_expect_t' takes one argument - a lisp expression to
evaluate. The test passes if the expression returns `t', otherwise it
fails and the output is reported to the tester.
We start modestly, with a (slightly modified) test case from Kazuo
Teramoto. Originally it just made sure the bindings didn't crash; here
we check that by comparing the output with that of notmuch search.
Some tests don't break when HUP signal is sent tho those (by
pressing ctrl-c on the terminal). Therefore, the top-level
test script catches the HUP and sends TERM signal to the
started test script.
This tests notmuch new's ability to recover from arbitrary stopping
failures. It interrupts notmuch new after every database commit and,
on every resulting database snapshot, re-runs notmuch new to
completion and checks that the final database state is invariant.
Test for bug. Current stemming support for notmuch adds extra terms
to the DB which aren't removed when the file renames are detected.
When folder tags are added to a message, Xapian terms for both XFOLDER
and ZXFOLDER are generated. When one of the filenames are
renamed/removed, only the XFOLDER tags are removed, leaving it possible
for a match on a folder: tag that was previously but is no longer a
match in the maildir.
The worry here is that a binary linking with libnotmuch might lose
access to Xapian::Error symbols because libnotmuch hides them.
We are careful here to create ./fakedb/.notmuch in order to trigger a
Xapian exception, and not just a missing file check.
Thanks to jrollins and amddragon for suggestions.
(cherry picked from commit 66f37f5f6864a988f94ddb893e3a176af57f6c8e)
Each top level test (basic, corpus, etc...) is run with a fixed
timeout of 2 minutes.
The goal here is to treat a hung test as a failure. The emacs test for
sending mail is known to be problematic on the Debian
autobuilders. This is both a bandaid fix for that, and a sensible long
term feature.
(cherry picked from commit 5f99c80e02736c90495558d9b88008a768876b29)
This adds a new "crypto" test script to the test suite to test
PGP/MIME signature verification and message decryption. Included here
is a test GNUPGHOME with a test secret key (passwordless), and test
for:
* signing/verification
* signing/verification with full owner trust
* verification with signer key unavailable
* encryption/decryption
* decryption failure with missing key
* encryption/decryption + signing/verfifying
* reply to encrypted message
* verification of signature from revoked key
These tests are not expected to pass now, but will as crypto
functionality is included.
Change #!/bin/bash at start of tests to "#!/usr/bin/env bash". That way
systems running on bash < 4 can prepend bash >= 4 to path before
running the tests.
This tests "notmuch show" with both --format=text and --format=json on
a message with some non-trivial MIME multipart nesting, (multiple parts
within a multipart/mixed part which is within a multipart/signed part).
The test captures the current behavior (where only the leaf nodes of
the MIME structure are emitted as a flat list---the multipart parts
are effectively ignored). We plan to soon change the json output at
least to emit an actual hierarchy matching the MIME structure, (at
which point we will update this test).
The new name is more descriptive of the bug being tested. Also, the test
is rewritten slightly so that it's much more plain to see how the bug
manifests itself, (that messages are droped from the emacs result at
regular intervals). Primarily, this is by collapsing the large blobs
used to inflate the message subjects.
Now that we understand the bug here, we rename this test to
search-insufficient-from-quoting to clarify the bug being exercised,
(which occurs when the From: line contains an unquoted '.' character).
We also mark these tests as expected failures until the bug gets fixed.
Currently, there are two places in the test framework that contain very
long list on a single line. Whenever a test is added (or changed) in
several branches and these branches are merged, it results in conflict
which is hard to resolve because one has to go through the whole long
line to find where the conflict is.
This patch splits these long lists to several lines so that the
conflicts are easier to resolve.
Currently, whenever we call index_terms multiple times for a single
field, the term generator is being reset to position 0 each time. This
means that with text such as:
To: a@b.c, x@y.z
one can get a bogus match by searching for:
To: a@y.c
Thanks to Mark Anderson for reporting the bug, (and providing a nice,
minimal test case that inspired what is used here).
This is a new feature which is not implemente yet, so these tests mostly
fail currently. A subsequent commit will add the feature and cause these
tests to start passing.
These tests verify that we can search for containing folders of mail files
by word or by phrase and that the search terms are updated correctly when
directories are renamed.
This reverts commit f22a7ec1e2.
Interrupting the test suite due to an actual bug in a test script
would be just fine, but interrupting the run of the entire test suite
at the first test failure is unacceptable.
This code simply wasn't being exercised by the test suite before, so
this will be useful.
Meanwhile, there's currently a bug in "notmuch search --output=tags"
in that it doesn't print a final newline. But the current test suite
isn't able to catch this bug since the $() construct of the shell
doesn't preserve the distinction of whether the final newline is
present or not.
Break notmuch-test whenever a test script returns non-zero status.
This happens either when some test from the script fails or when there
is an error in the script.
This is especially useful in the latter case since the error may not
appear in the final aggregated results.
This is part of an effort to avoid proliferation of excessive
top-level notmuch commands. Also, "raw" better captures the
functionality here, (as opposed to "cat" which is a fairly oblique
reference to a bad Unix abbreviation whose metaphor doesn't work here
since "notmuch cat" operates only on a single message and hence cannot
"con'cat'enate" anything).
This command outputs a raw message matched by search term to the
standard output. It allows MUAs to access the messages for piping,
attachment manipulation, etc. by running notmuch cat rather then
directly access the file. This will simplify the MUAs when they need
to operate on a remote database.
Edited-by: Carl Worth <cworth@cworth.org>: Remove trailing whitespace,
add missing "test_done" to new test script to avoid "Unexpected exit"
error.
The bash code in the test suite is using associative arrays which were
only added to bash as of release 4.0.
If the test suite is run with an older bash, we now immediately error
out and explain the situation, (instead of emitting confusing error
messages and failing dozens of tests, which is what happened before
this change).
Now that we can usefully pass section names via the NOTMUCH_SKIP_TESTS
environment variable, it's useful to actually print those names out
for the user. Then, since we're now printing these names, let's use
nicer names, (not excessively long but also not using abbreviations
like "msg").
The numbers were meaningless, and they made it hard to find a file of interest.
Instead, we get the ordering we want by adding an explicit list of
tests to run to the notmuch-test script.
This makes the new, git-derived test suite report results in a manner
similar to the original notmuch test suite.
Notable changes include:
* No more initial '*' on every line
* Only colorize a single word
* Don't print useless test numbers
* Use "PASS" in place of "ok"
* Begin sentences with a capital letter
* Print test descriptions for each block
* Separate each block of tests with a blank line
* Don't summarize counts between each block
This avoids "make test" emitting messages from three (3!) recursive
invocations of make. We change the invocations of the tests themselves
to occur directly from the shell script rather than having the shell
script invoke make again and using wildcards in the Makefile.
The changes are:
- The notmuch-test was split into several files (t000?-*.sh).
- Removed helper functions which were moved to test-lib.sh
- Replaced every printf with test_expect_success.
- Test commands chained with && (test-lib.sh doesn't use "set -e" in
order to complete the test suite even if something fails)
- Many variables such as ${MAIL_DIR} were properly quoted as they
contain spaces.
- Changed quoting patterns in add_message and generate_message (single
quotes are already used by the test framework).
- ${TEST_DIR} replaced by ${PWD}
QUICK HOWTO:
To run the whole test suite
make
To run only a single test
./t0001-new.sh
To stop on the first error
./t0001-new.sh -i
then mail store and database can be inspected in
"trash directory.t0001-new"
To see the output of tests
./t0001-new.sh -v
To not remove trash directory at the end:
./t0001-new.sh -d
To run all tests verbosely:
make GIT_TEST_OPTS="-v"
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Micah Anderson reported an issue where a message failed to display in
the emacs interface, (it instead gave an error, "json-read-string: Bad
string format").
Micah tracked this down to the json output from "notmuch show" being
interrupted by a GMime error message:
gmime-CRITICAL **: g_mime_stream_filter_add: assertion
`GMIME_IS_FILTER (filter)
I tracked this down further to notmuch passing a NULL value to
g_mime_stream_filter_add. And this was due to calling
g_mime_filter_charset_new with a value of "unknown-8bit".
So we add a test message withe a Conten-Type of "text/plain;
charset=unknown-8bit" from Micah's message. Then we fix "notmuch show"
to test for NULL before calling g_mime_stream_filter_add. Bug fixed.
Scott Henson reported an internal error that occurred when he tried to
add a message that referenced another message with a message ID well
over 300 characters in length. The bug here was running into a Xapian
limit for the length of metadata key names, (which is even more
restrictive than the Xapian limit for the length of terms).
We fix this by noticing long message ID values and instead using a
message ID of the form "notmuch-sha1-<sha1_sum_of_message_id>". That
is, we use SHA1 to generate a compressed, (but still unique), version
of the message ID.
We add support to the test suite to exercise this fix. The tests add a
message referencing the long message ID, then add the message with the
long message ID, then finally add another message referencing the long
ID. Each of these tests exercise different code paths where the
special handling is implemented.
A final test ensures that all three messages are stitched together
into a single thread---guaranteeing that the three code paths all act
consistently.
We're about to add a test with an excessively long message-id, (512
characters or so). This exceeds filename length limits, so just always
the simple counter to generate the filenames, (which we were doing for
messages with non-custom IDs anyway).
