This stops the (usually incorrect) sigstatus and encstatus buttons
appearing when replying in emacs, and updates the test suite to match.
Overriding the status button functions is a little unusual but much
less intrusive than passing an argument all the way down the call
chain. It also makes it clear exactly what it does.
We also hide the application/pgp-encrypted part as it can only contain
"Version: 1". We do this in notmuch show, which means it also happens
when replying.
This allows the user to override the mime-type of a part in the show
buffer. This takes the simple option of displaying the part with the
specified mime-type in its own buffer (in view mode). This avoids
further complicating the part handling code.
Bound to ". m" (i.e., m in the part map). Then the user can either
enter a mime-type (with completion to all mime types that mailcap (and
thus notmuch) knows about, or press return for the default choice of
text/plain.
Previously if a marking read tag change (i.e., removing the unread
tag) failed for some reason, such as a locked database, then no more
mark read tag changes would be attempted in that buffer.
This handles the error more gracefully. There is not much we can do
yet about dealing with the error itself, and marking read is probably
not important enough to warrant keeping a queue of pending changes or
anything.
However this commit changes it so that
- we do try and make future mark read tag changes.
- we display the tag state correctly: i.e. we don't display the tag as
deleted (no strike through)
- and since we know the tag change failed we can try to mark this
message read in the future. Indeed, since the code uses the
post-command hook we will try again on the next keypress (unless the
user has left the message).
We indicate to the user that these mark read tag changes may have
failed in the header-line.
Many of the external links found in the notmuch source can be resolved
using https instead of http. This changeset addresses as many as i
could find, without touching the e-mail corpus or expected outputs
found in tests.
This binding is similar to mutt's, which is
bind {mode} b "bounce-message" # remail a message to another user
where {mode} is 'index', 'pager' or 'attach'.
The new function notmuch-show-message-resend re-sends
message to new recipients using #'message-resend.
Recipients are read from minibuffer as a comma-separated
string (with some keyboard support including tab completion).
Final confirmation before sending is asked.
When no decryption or signature examination is
happening (i.e. `notmuch-crypto-process-mime' is `nil') insert buttons
that indicate this, rather than remaining silent.
Currently the preference for which sub-part of a multipart/alternative
part is shown is global. Allow to the user to override the settings on a
per-message basis by providing the ability to call a function that has
access to the message to return the discouraged type list.
The original approach is retained as the default.
Add a customizable function specifying which parts get a header when
replying, and give some sensible possiblities. These are,
1) all parts except multipart/*. (Subparts of a multipart part do
receive a header button.)
2) only included text/* parts.
3) Exactly as in the show buffer.
4) None at all. This means the reply contains a mish-mash of all the
original message's parts.
In the test suite we set the choice to option 4 to match the
previous behaviour.
This allows callers of notmuch-show-insert-bodypart to use a `let'
binding to override the default function for specifying when part
headers should be inserted.
We also add an option to never show part buttons which will be used by
the test suites for the reply tests.
If the basic query passed to `notmuch-show' generates no results, ring
the bell and inform the user that no messages matched the query rather
than displaying an empty buffer and showing an obscure error.
Similarly when refreshing a `notmuch-show' buffer and no messages match.
notmuch-show-view-raw-message() re-uses buffer created with same
name (same Message-Id:) but it did not erase it before filling.
If this ever happened, there were duplicated (potentially overlapping)
content in the buffer. Now this is fixed.
Apparently since emacs 24.5 the (view-buffer) makes the buffer read-only;
so this problem would not have happened there, just that
notmuch-show-view-raw-message() failed. This is fixed by setting
inhibit-read-only t before erasing and filling the buffer. The emacs 24.5
feature having raw message buffer read-only is also now explicitly set to
the buffer so the same experience is available with emaces < 24.5.
Commit e26d767897 changed the
fontification of the body associated with the From header to
message-header-from. However, that face is non-existent, and in
message.el (message-font-lock-keywords) the From-header falls through
and is attributed the message-header-other face.
This commit removes the fontification of the [Ff]rom header in
notmuch-show-mode in order to fontify it using the message-header-other
face.
This only affects non-default configurations where
notmuch-message-headers is set to display From.
Currently notmuch-show-max-text-part-size is 10000 which means some
relatively normal messages have all parts hidden by default. Increase
this to 100000 by default.
The setting was introduced to alleviate problems with notmuch being
very slow on large threads. Users hitting these problems may wish to
customize this variable to something smaller (like 10000).
Show the current thread with a different filter (i.e., open messages
in the thread matching the new query).
Bound to 'l' for "limit".
Note that it is not the same as filter in search mode as it replaces
the existing query rather than ANDing with it (but it does keep the
thread-id part of the query).
Separate out a notmuch-show-goto-msg-id sub-function from
notmuch-show-apply-state. There should be no functional change but the
next patch will call the new function.
notmuch-show can be slow displaying large attachments so hide them by
default. The default maximum size is 10000 bytes/characters but it is
customizable.
Note that notmuch-show-insert-bodypart is also called from the reply
code so we need to be a little careful.
Besides generally cleaning up the code and separating the general
content ID handling from the w3m-specific code, this fixes several
problems.
Foremost is that, previously, the code roughly assumed that referenced
parts would be in the same multipart/related as the reference.
According to RFC 2392, nothing could be further from the truth:
content IDs are supposed to be globally unique and globally
addressable. This is nonsense, but this patch at least fixes things
so content IDs can be anywhere in the same message.
As a side-effect of the above, this handles multipart/alternate
content-IDs more in line with RFC 2046 section 5.1.2 (not that I've
ever seen this in the wild). This also properly URL-decodes cid:
URLs, as per RFC 2392 (the previous code did not), and applies crypto
settings from the show buffer (the previous code used the global
crypto settings).
`notmuch-get-bodypart-content' could do two very different things,
depending on conditions: for text/* parts other than text/html, it
would return the part content as a multibyte Lisp string *after*
charset conversion, while for other parts (including text/html), it
would return binary part content without charset conversion.
This commit completes the split of `notmuch-get-bodypart-content' into
two different and explicit APIs: `notmuch-get-bodypart-binary' and
`notmuch-get-bodypart-text'. It updates all callers to use one or the
other depending on what's appropriate.
The new function, `notmuch-get-bodypart-binary', replaces
`notmuch-get-bodypart-internal'. Whereas the old function was really
meant for internal use in `notmuch-get-bodypart-content', it was used
in a few other places. Since the difference between
`notmuch-get-bodypart-content' and `notmuch-get-bodypart-internal' was
unclear, these other uses were always confusing and potentially
inconsistent. The new call clearly requests the part as undecoded
binary.
This is step 1 of 2 in separating `notmuch-get-bodypart-content' into
two APIs for retrieving either undecoded binary or decoded text.
We set header-line-format to the message subject, but if the subject
contains percents, the next character is interpreted as a formatting
control, which is not desired.
`with-current-notmuch-show-message' applies a `no-conversion' coding
system when reading a raw message from notmuch. That coding system
should _not_ be applied when the body of the macro is evaluated, as it
can cause file operations used during that evaluation to incorrectly
apply the `no-conversion' coding system.
This was discovered when a user's .signature file contained non-ASCII
characters. When a message is forwarded, the `no-conversion' coding
system was applied to the reading of the .signature file, resulting in
raw rather than UTF-8 interpretation of the data.
tree overrides notmuch-show-get-prop so that it can use many of the
utility function directly. Now that tree is in mainline the version
from tree can be moved to show and the original overridden show
version dropped.
This adds the current query as a "default value" to
notmuch-read-qeury. The default value is available via a down-arrow as
opposed to history which is available from the up arrow.
Note if a user presses return in the minibuffer this value is not
returned.
The implementation is simple but notmuch-read-query could be called
via notmuch-search/notmuch-tree etc from any buffer so it makes sense
to put the decision of how to extract the current query in
notmuch-read-query rather than in each of the callers.
Add a function for updating seen messages to the
post-command-hook. This function calls a customizable (by eg
defcustom) function with parameters the start and end of the current
window and that function can decide what to mark read based on that
and the current point.
Since this is in the post-command-hook it should get called after most
user actions (exceptions include user resizing the window) so it
should be possible to make sure the seen status gets updated whether
the user uses notmuch commands like next-message or normal emacs
commands like scroll-up.
It removes all of the old mark read/seen points but introduces a
simple example function that just marks the current message read if it
is open. This function has one small subtlety: it makes sure it
doesn't mark the same message read twice (in the same instance of the
same buffer); otherwise the post-command-hook makes it impossible for
a user to manually mark a message unread.
This fixes the current bugs (imo) that closed messages can be marked
read, and that opening a closed message does not mark it read.
Another advantage of using the post-command-hook any programmatic use
with point passing through a message will not mark it read.
Some archives may use a more complicated scheme for referring to
messages than just concatenated url and message-id. In particular,
patchwork requires a query to translate message-id to a patchwork
patch id. Allow functions in notmuch-show-stash-mlarchive-link-alist
to facilitate this.
For example, one could use something like this for patchwork.
(lambda (message-id)
(concat
"http://patchwork.example.com/patch/"
(nth 0
(split-string
(car (last (process-lines "pwclient" "search" "-n" "1"
"-m" (concat "<" message-id ">"))))))))
Previously, even if debug-on-error was non-nil, the debugger would not
trap on part renderer errors. This made debugging part renderer bugs
frustrating, so let the debugger trap these errors.
This allows (and requires) the original-tags to be passed along with
the current-tags to be passed to notmuch-tag-format-tags. This allows
the tag formatting to show added and deleted tags.By default a removed
tag is displayed with strike-through in red (if strike-through is not
available, eg on a terminal, inverse video is used instead) and an
added tag is displayed underlined in green.
If the caller does not wish to use the new feature it can pass
current-tags for both arguments and, at this point, we do exactly that
in the three callers of this function.
Note, we cannot tidily allow original-tags to be optional because we would
need to distinguish nil meaning "we are not specifying original-tags"
from nil meaning there were no original-tags (an empty list).
We use this in subsequent patches to make it clear when a message was
unread when you first loaded a show buffer (previously the unread tag
could be removed before a user realised that it had been unread).
The code adds into the existing tag formatting code. The user can
specify exactly how a tag should be displayed normally, when deleted,
or when added.
Since the formatting code matches regexps a user can match all deleted
tags with a ".*" in notmuch-tag-deleted-formats. For example setting
notmuch-tag-deleted-formats to '((".*" nil)) tells notmuch not to show
deleted tags at all.
All the variables are customizable; however, more complicated cases
like changing the face depending on the type of display will require
custom lisp.
Currently this overrides notmuch-tag-deleted-formats for the tests
setting it to '((".*" nil)) so that they get removed from the display
and, thus, all tests still pass.
