Presently, the code which finds the parent of a message as it is being
added to the database assumes that the first Message-ID-like substring
of the In-Reply-To header is the parent Message ID. Some mail clients,
however, put stuff other than the Message-ID of the parent in the
In-Reply-To header, such as the email address of the sender of the
parent. This can fool notmuch.
The updated algorithm prefers the last Message ID in the References
header. The References header lists messages oldest-first, so the last
Message ID is the parent (RFC2822, p. 24). The References header is
also less likely to be in a non-standard
syntax (http://cr.yp.to/immhf/thread.html,
http://www.jwz.org/doc/threading.html). In case the References header
is not to be found, fall back to the old behavior.
V2 of this patch, incorporating feedback from Jani and (indirectly)
Austin.
The support for emacs version 22 has not worked at least since
September 2011 when I attempted to use it. I expanded the support in
id:yf6ippgtbn0.fsf@taco2.nixu.fi but that was not enough and then I
found it easier to switch to emacs 23.
In case one wants to resurrect emacs 22 (or earlier!) support, pick
the changes from the patch email referenced above.
Added a customizable variable notmuch-address-selection-function
and the function with the same name to provide a way for user to
change the function called to do address selection.
By default the functionality is exactly the same as it has been so
far; completing-read is called with the same parameters as before.
Setting equivalent lambda expression in place of using
notmuch-address-selection-function function is done as follows:
(setq notmuch-address-selection-function
(lambda (prompt collection initial-input)
(completing-read prompt collection nil nil initial-input)))
For example drop-in replacement with ido-completing-read can be done
easily as an one alternative to the default.
The use of realpath(3) in
commit 58ed67992d
Author: Jani Nikula <jani@nikula.org>
Date: Sun Apr 7 20:15:03 2013 +0300
cli: config: do not overwrite symlinks when saving config file
broke config file save when the file does not exist, which results in
'notmuch setup' always failing to create a new config file.
Fix by checking ENOENT from realpath(3).
Highlight "excluded messages" as a term with a meaning that
may not be obvious.
Be explicit about the effects of search --exclude=true and
--exclude=false.
The notmuch-addrlookup utility uses a third party library to read the
notmuch configuration file. The previously used implementation at
"github.com/kless/goconfig" vanished, so this patch switches to the
implementation at "github.com/msbranco/goconfig". As the
implementations differ at the API level, the code is updated
accordingly.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
Xapian::TermIterator::operator* returns std::string which is destroyed
as soon as (*i).c_str() finishes. The remembered pointer 'term' then
references invalid memory.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Some (declare-function ...) definitions were drifted away from the
actual (defun ...)'s. To find the drifts and to verify changes
the following command line was used:
$ emacs --batch -L emacs --eval '(check-declare-directory "emacs")'
commit d487ef9e58
Author: Jani Nikula <jani@nikula.org>
Date: Sat Mar 30 15:53:16 2013 +0200
cli: mime node: abstract decryption and signature verification
introduced a compiler warning, reported by Mark Walters, when building
against gmime 2.4:
mime-node.c:224:9: warning: assignment discards ‘const’ qualifier from
pointer target type [enabled by default]
Pass the non-const signature validity to the destructor to fix this.
Use realpath to canonicalize the config path before writing.
Previously 'notmuch setup' and 'notmuch config set' overwrote the
config file even if it was a symbolic link.
From a show buffer, notmuch-bbdb/snarf-from imports the sender into
bbdb. notmuch-bbdb/snarf-to imports all recipients. Newly imported
contacts are reported in the minibuffer / Messages buffer.
Both functions use the BBDB parser to recognize email address formats.
The code filled with #ifdef GMIME_ATLEAST_26 is difficult to
read. Abstract the decryption and signature verification into
functions, with separate implementations for GMime 2.4 and 2.6, to
clarify the code.
There should be no functional changes.
The code filled with #ifdef GMIME_ATLEAST_26 is difficult to
read. Abstract gpg context creation into a function, with separate
implementations for GMime 2.4 and 2.6, to clarify the code.
There should be no functional changes.
This modifies notmuch hello to use the new count --batch
functionality. It should give exactly the same results as before but
under many conditions it should be much faster. In particular it is
much faster for remote use.
The code is a little ugly as it has to do some working out of the
query when asking the query and some when dealing with the result.
However, the code path is exactly the same in both local and remote
use.
Add support for reading queries from stdin, one per line, and writing
results to stdout, one per line.
This will bring considerable performance improvements when utilized in
Emacs notmuch-hello, especially so when running remote notmuch.
This has two benefits: unified error handling, and avoiding tramp's
hooking into shell-command-string.
This seems to be a fix for id:874nguxbvq.fsf@tu-dortmund.de
Add --remove-all option to "notmuch tag" to remove all tags from the
messages matching query before applying the tag changes. This allows
removal of all tags and unconditional setting of the tags of a
message:
$ notmuch tag --remove-all id:foo@example.com
$ notmuch tag --remove-all +foo +bar id:foo@example.com
without having to resort to the complicated (and still quoting
broken):
$ notmuch tag $(notmuch search --output=tags '*' | sed 's/^/-/') \
id:foo@example.com
$ notmuch tag $(notmuch search --output=tags '*' | sed 's/^/-/') \
+foo +bar id:foo@example.com
Notmuch automatically re-orders names of the format "Last, First" to
"First Last" when the associated email address is
First.Last@example.com. But, if a name is of the format "Last,First"
then notmuch will format the name as "irst Last". Handle any number of
spaces after the comma, including none.
After new notmuch release has been published the NEWS and manual
pages have been updated using these 2 programs.
Adding the tools to notmuch repository eases their use, adds more
transparency to the "process" and gives more people chance to
do the updates is one is unavailable to do it at the time being.
Rewrite the bash completion script to actually do something
useful. Supported completions:
* All the notmuch commands, command line arguments, and values for
keyword arguments.
* Tags after + and - in 'notmuch tag'.
* Config options in 'notmuch config', and some config option values.
* Search prefixes in all commands that use search terms.
* Tags after tag: prefix in search terms.
* User's email addresses after from: and to: in search terms.
This is all based on the bash-completion package [1], and will not
work without it.
[1] http://bash-completion.alioth.debian.org/
This patch extracts the rendering of tags in notmuch-show to
the notmuch-tag file.
This file introduces a `notmuch-tag-formats' variable that associates
each tag to a particular format. This variable can be customized
thanks to the work of Austin Clements. For example,
'(("unread" (propertize tag 'face '(:foreground "red")))
("flagged" (notmuch-tag-format-image tag "star.svg")))
associates a red foreground to the "unread" tag and a star picture to
the "flagged" tag.
Signed-off-by: Damien Cassou <damien.cassou@gmail.com>
