The notmuch cli program and emacs lisp versions may differ (especially
in remote usage). It helps to resolve problems if we can determine
the versions of notmuch cli and notmuch emacs mua separately.
The build process now creates notmuch-version.el from template file
by filling the version info to notmuch-emacs-version variable.
This version file will be as prerequisite to the target files
that use the version info for some purpose, like printing
it for the user to examine. The contents of the version.stamp
file is seldom read by the build system itself as the $(VERSION)
variable has the same information.
Thanks to Trevor, David and Mark for their contributions.
With two branches getting fetched (master and config), the branch
referenced by FETCH_HEAD is ambiguous. For example, I have:
$ cat FETCH_HEAD
41d7bfa7184cc93c9dac139d1674e9530799e3b0 \
not-for-merge branch 'config' of http://nmbug.tethera.net/git/nmbug-tags
acd379ccb973c45713eee9db177efc530f921954 \
not-for-merge branch 'master' of http://nmbug.tethera.net/git/nmbug-tags
(where I wrapped the line by hand). This means that FETCH_HEAD
references the config branch:
$ git rev-parse FETCH_HEAD
41d7bfa7184cc93c9dac139d1674e9530799e3b0
which breaks all of the FETCH_HEAD logic in nmbug (where FETCH_HEAD is
assumed to point to the master branch).
Instead of relying on FETCH_HEAD, use @{upstream} as the
remote-tracking branch that should be merged/diffed/integrated into
HEAD. @{upstream} was added in Git v1.7.0 (2010-02-12) [1], so
relying on it should be fairly safe. One tricky bit is that bare
repositories don't set upstream tracking branches by default:
$ git clone --bare http://nmbug.tethera.net/git/nmbug-tags.git nmbug-bare
$ cd nmbug-bare
$ git remote show origin
* remote origin
Fetch URL: http://nmbug.tethera.net/git/nmbug-tags.git
Push URL: http://nmbug.tethera.net/git/nmbug-tags.git
HEAD branch: master
Local refs configured for 'git push':
config pushes to config (up to date)
master pushes to master (up to date)
While in a non-bare clone:
$ git clone http://nmbug.tethera.net/git/nmbug-tags.git
$ cd nmbug-tags
$ git remote show origin
* remote origin
Fetch URL: http://nmbug.tethera.net/git/nmbug-tags.git
Push URL: http://nmbug.tethera.net/git/nmbug-tags.git
HEAD branch: master
Remote branches:
config tracked
master tracked
Local branch configured for 'git pull':
master merges with remote master
Local ref configured for 'git push':
master pushes to master (up to date)
From the clone docs [2]:
--bare::
Make a 'bare' Git repository…
Also the branch heads at the remote are copied directly
to corresponding local branch heads, without mapping
them to `refs/remotes/origin/`. When this option is
used, neither remote-tracking branches nor the related
configuration variables are created.
To use @{upstream}, we need to the local vs. remote-tracking
distinction, so this commit adds 'nmbug clone', replacing the
previously suggested --bare clone with a non-bare --no-checkout
--separate-git-dir clone into a temporary work directory. After
which:
$ git rev-parse @{upstream}
acd379ccb973c45713eee9db177efc530f921954
gives us the master-branch commit. Existing nmbug users will have to
run the configuration tweaks and re-fetch by hand. If you don't have
any local commits, you could also blow away your NMBGIT repository and
re-clone from scratch:
$ nmbug clone http://nmbug.tethera.net/git/nmbug-tags.git
Besides removing the ambiguity of FETCH_HEAD, this commit allows users
to configure which upstream branch they want nmbug to track via 'git
config', in case they want to change their upstream repository.
[1]: http://git.kernel.org/cgit/git/git.git/tree/Documentation/RelNotes/1.7.0.txt
[2]: http://git.kernel.org/cgit/git/git.git/tree/Documentation/git-clone.txt
Manual pages are now generated and during the generation the version
string is read from `version` file, so this (currently failing) test
checking manual page versions can be removed.
While at it, changed the case pattern *[^0-9.]*
to its portable alternative *[!0-9.]*
While adding that fixed (also other) typos noticed by aspell(1) run,
and capitalized Emacs and (most) Notmuch terms to match how emacs
Info documentation seems to look in general.
the POSIX 2008 behaviour of realpath is not available everywhere so we
provide a simple wrapper function. We use (and provide) the gnu
extension canonicalize_file_name to make it cleaner to test for the
feature we need; otherwise we have to rely on realpath segfaulting if
the second argument is null.
I'm not sure how it got into debian/changelog without actually
happening, but actually delete martin from debian/control per
request in Debian bug #719100
Currently "make debian-snapshot" will include the performance corpus
tarball in the source package, which slows things down and wastes disk
space. tar-ignore is needed twice to keep the default exclude rules
(e.g. to exclude .git)
The notmuch library includes a full blown message header parser. Yet
the same message headers are parsed by gmime during indexing. Switch
to gmime parsing completely.
These are the main changes:
* Gmime stops header parsing at the first invalid header, and presumes
the message body starts from there. The current parser is quite
liberal in accepting broken headers. The change means we will be
much pickier about accepting invalid messages.
* The current parser converts tabs used in header folding to
spaces. Gmime preserve the tabs. Due to a broken python library used
in mailman, there are plenty of mailing lists that produce headers
with tabs in header folding, and we'll see plenty of tabs. (This
change has been mitigated in preparatory patches.)
* For pure header parsing, the current parser is likely faster than
gmime, which parses the whole message rather than just the
headers. Since we parse the message and its headers using gmime for
indexing anyway, this avoids and extra header parsing round when
adding new messages. In case of duplicate messages, we'll end up
parsing the full message although just headers would be
sufficient. All in all this should still speed up 'notmuch new'.
* Calls to notmuch_message_get_header() may be slightly slower than
previously for headers that are not indexed in the database, due to
parsing of the whole message. Within the notmuch code base, notmuch
reply is the only such user.
We've supported mbox files containing a single message for historical
reasons, but the support has been deprecated, with a warning message
while indexing, since Notmuch 0.15. Finally drop the support, and
consider all mbox files non-email.
We push mark on reply so user can cut the quote. Push the mark before
signature, if any, instead of end of buffer so the signature is
preserved.
This is consistent with message-kill-to-signature.
So that users can easily organize their notmuch-specific configurations
to separate file and they don't have to have notmuch configurations in
*every* emacs installation they launch, especially if those need to
'(require notmuch) to make the configurations possible.
When (require 'notmuch) is added to ~/.emacs notmuch is loaded to every
instance of emacs although it may not be used in majority of
those instances.
When (autoload 'notmuch "notmuch" ...) is added to ~/.emacs notmuch
is loaded (only) when user invokes the notmuch function.
User may want to add other entrypoints to notmuch by adding more
autoloads -- the autoload instruction given should offer them clue how
to do so.
Without this flush, if stdout is block buffered (which will happen if
it's a pipe or a file, for example) and the hook also writes to
stdout, then notmuch new's output will appear *after* the hook output.
This situation may be a little esoteric, but it's good practice to
flush before you fork anyway.
Previously, the term escaper used a blacklist of characters that
needed escaping. This blacklist turned out to be somewhat incomplete;
for example, it did not contain non-whitespace ASCII control
characters or Unicode "fancy quotes", both of which do require the
term to be escaped.
Switch to a whitelist of characters that are definitely safe to leave
unquoted. This fixes the broken test introduced by the previous
patch.
The current term escaper gets most of these right, but fails to escape
things containing Unicode "fancy quotes" or things containing
non-whitespace control characters.
I still have one machine with old enough Xapian to not have compaction
support. Make the tests check for unsupported compact operation when
compact is not available.
The subtle part is adding .rst and .py files to vpath so they can be
used as dependencies without prefixing with $(srcdir)
We also change the interface to mkbuildeps.py: rather than getting the
containing directory from the conf file path, we go the other way.
This uses the recent functionality to show the tag changes in the tree
buffer. Currently this is only used to show changes the tree buffer
makes itself: i.e., it does not make display any changes reflecting
tagging done by other notmuch-buffers.
This uses the recent functionality to show the tag changes in the
search buffer. Currently this is only used to show changes the search
buffer makes itself: i.e., it does not make display any changes
reflecting tagging done by other notmuch-buffers.
This allows (and requires) the original-tags to be passed along with
the current-tags to be passed to notmuch-tag-format-tags. This allows
the tag formatting to show added and deleted tags.By default a removed
tag is displayed with strike-through in red (if strike-through is not
available, eg on a terminal, inverse video is used instead) and an
added tag is displayed underlined in green.
If the caller does not wish to use the new feature it can pass
current-tags for both arguments and, at this point, we do exactly that
in the three callers of this function.
Note, we cannot tidily allow original-tags to be optional because we would
need to distinguish nil meaning "we are not specifying original-tags"
from nil meaning there were no original-tags (an empty list).
We use this in subsequent patches to make it clear when a message was
unread when you first loaded a show buffer (previously the unread tag
could be removed before a user realised that it had been unread).
The code adds into the existing tag formatting code. The user can
specify exactly how a tag should be displayed normally, when deleted,
or when added.
Since the formatting code matches regexps a user can match all deleted
tags with a ".*" in notmuch-tag-deleted-formats. For example setting
notmuch-tag-deleted-formats to '((".*" nil)) tells notmuch not to show
deleted tags at all.
All the variables are customizable; however, more complicated cases
like changing the face depending on the type of display will require
custom lisp.
Currently this overrides notmuch-tag-deleted-formats for the tests
setting it to '((".*" nil)) so that they get removed from the display
and, thus, all tests still pass.
Add customize options for deleted/added tag formats. These are not
used yet but will be later in the series.
We switch to using `notmuch-apply-face' rather than `propertize' in
the defcustom for faces so that the faces for deleted/added tags add
to the default face attributes for the tag.
We special case deleting the unread tag as that tag is a strong visual
cue and we don't need that cue when we are just saying it used to be
unread. Thus, we revert to the normal tag face with strikethough for
deleted unread tags.
We will re-use the customize option for format-tags for formattting
deleted tags to added tags in the next patch so split it into a
widget. There should be no functional change.
This modifies `notmuch-tag-format-tag' to treat the keys of
`notmuch-tag-formats' as (anchored) regexps, rather than literal
strings. This is clearly more flexible, as it allows for prefix
matching, defining a fallback format, etc. This may cause compatibility
problems if people have customized `notmuch-tag-formats' to match tags
that contain regexp specials, but this seems unlikely.
Regular expression matching has quite a performance hit over string
lookup, so this also introduces a simple cache from exact tags to
formatted strings. The number of unique tags is likely to be quite
small, so this cache should have a high hit rate. In addition to
eliminating the regexp lookup in the common case, this cache stores
fully formatted tags, eliminating the repeated evaluation of potentially
expensive, user-specified formatting code. This makes regexp lookup at
least as fast as assoc for unformatted tags (e.g., inbox) and *faster*
than the current code for formatted tags (e.g., unread):
inbox (usec) unread (usec)
assoc: 0.4 2.8
regexp: 3.2 7.2
regexp+caching: 0.4 0.4
(Though even at 7.2 usec, tag formatting is not our top bottleneck.)
This cache must be explicitly cleared to keep it coherent, so this adds
the appropriate clearing calls.
This combines our two face combining functions into one, easy to use
function with a much shorter name: `notmuch-apply-face'. This
function takes the full set of arguments that
`notmuch-combine-face-text-property' took, but takes them in a more
convenient order and provides smarter defaults that make the function
easy to use on both strings and buffers.
Make nmbug-status more generally usable outside of nmbug by not
hardcoding notmuch related things.
This lets anyone publish html search views to mailing list messages
with a custom config file, independent of nmbug.
Because sphinx-build does not provide a convenient way of listing
which builders exist, and some people actually have pre 1.0 sphinx, we
try loading a relevant python module.
Currently the assumption is that no python in path -> no sphinx-build
in path.
It turns out there was a reason the old man pages were stored in a man
compatible hierarchy, namely so that we could run man on them before
installing.
Hardcode doc build location into test suite. This isn't ideal, but
let's unbreak the test suite for now.
This helps avoid build artifacts (namely, nroff and gzipped-nroff man
pages) owned by root.
The variables allow choosing which generator to use for the man page.
These will be hooked to configure in a following commit.
Previously, make_boolean_term did not quote empty boolean terms or
boolean terms that started with '('. These cases are incompatible
with Xapian: empty terms cannot be omitted, and boolean terms that
start with '(' trigger an alternate term quoting syntax.
Fix this by quoting empty terms and terms that contain '('.
It seems that between version 1.26 and 1.27 of gnu tar, directories to
be extracted read with --files-from are no longer recursively extacted.
This patch puts them on the command line instead.
