This unifies the part button actions and the underlying part action
functions into single interactive command that simply applies to the
part containing point using the just-added part p-list text property
instead of button properties. Since all part actions can be performed
by applying the appropriate mm function to an mm-handle, this patch
abstracts out the creation of mm handles, making the implementations
of the part commands trivial. This also eliminates our special
handling for part save in favor of using the appropriate mm function.
This necessarily modifies the way we handle the default part button
action, but in a way that does not change the meaning of the
notmuch-show-part-button-default-action defcustom.
Since these commands are no longer specific to buttons, this patch
eliminates the extra metadata stored with each button. This also
eliminates one rather special-purpose macro for a collection of
general purpose part handling utilities.
This is similar to what we already do with the message p-list, though
we apply the part's text property to the whole part's text, in
contrast with the message p-list, which is (rather obscurely) only
applied to the first character.
Previously, we lost any text properties applied to part buttons or
wash buttons when they were toggled because `insert' directly copies
the text properties of the string being inserted. Fix this by
capturing the properties applied to the button beforehand and
re-applying them after inserting the new text.
--stderr=FILE tests were added to test/help-test as it is the one
doing most global option testing. Also, it was simplest to test
this new option using `notmuch help` command.
With this option all writes to stderr are redirected to the specified
FILE (or to stdout on case FILE is '-'). This is immediately useful
in emacs interface as some of its exec intefaces do not provide
separation of stdout and stderr.
For such a simple regexp, this was broken in a very complicated way.
The intent was to strip the newline (and potentially other whitespace)
off the end of the error string so there wasn't an extra newline in
the error signal. However, the regexp was deeply dependent on the
active syntax table and the subtleties of $. We didn't notice this
because all notmuch major modes put ?\n in the whitespace class, which
makes this behaved as intended: the "\\s " matches all newlines, but
by matching the newline character, causes the $ *not* to match
*except* where it matched the empty string at the very end of the
string, which was not followed by a newline.
However, if the syntax table declares ?\n to be non-whitespace
(lisp-mode declares it as endcomment, and is likely to be the mode
you're in when testing functions), then this regexp behaves completely
differently, matching trailing spaces at the end of every line within
the string.
The solution is to say what we mean for whitespace *and* to switch
from $ to \', which matches only the end of the string, rather than
the end of each line. Both are necessary or this will strip away
interior newlines, which is not what we want.
Support for out-of-tree builds was added in
commit 3e4a9d60a9
Author: Carl Worth <cworth@cworth.org>
Date: Wed Mar 9 15:02:42 2011 -0800
build: Add support for non-source-directory builds.
and broken in
commit 7beeb8c88a
Author: David Bremner <bremner@debian.org>
Date: Sat Nov 17 12:28:15 2012 -0400
test: initial performance testing infrastructure
Fix the build breakage.
Out-of-tree 'make test' has been broken since earlier than the above,
and remains broken, as does out-of-tree perf test, but at least the
build now works.
Previously, notmuch-show-view-part overrode the function binding of
mm-show-part to redirect it to notmuch-show-save-part to get notmuch's
default file name handling in case mm-display-part decided to fall
back to saving the part. In addition to being messy, this depended on
the now-deprecated dynamic binding behavior of flet.
This patch removes the mm-show-part override in favor of passing the
file name in to mm-show-part the way it expects, so we get its default
file name handling. It's not clear why we didn't do this before;
mm-show-part has supported default file names since at least Emacs
23.1.
Currently it simply finds any library available, and if notmuch is
installed in the system, it would give priority to that library.
Let's implement our own helper functions to link directly to the local
library, and give priority to the local header file.
Also, add an option to properly check if there are missing symbols.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Previously, we simply byte compiled each Elisp source file
independently. This is actually the wrong thing to do and can lead to
issues with macros and performance issues with substitutions because
1) when the byte compiler encounters a (require 'x) form, it will load
x.elc in preference to x.el, even if x.el is newer, and as a result
may load old macro and substitution definitions and 2) if we update a
macro or substitution definition in one file, we currently won't
re-compile other files that depend on the file containing the
definition.
This patch addresses these problems by computing make dependency rules
from the (require 'x) forms in the Elisp source files, which we inject
into make's dependency database.
It has never existed in Ruby (maybe JRuby). Fortunately the symbols are
loaded lazily, so nobody would notice unless they try
'query::count_messages'.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
I find this script pretty useful when figuring out who to blame for
MIME rendering problems.
The notmuch repo will be the new primary home for this script, unless
and until a better home turns up.
This adds a target message for pick which it will jump to when (if) it
appears. It adds the target to notmuch-pick-from-show-current-query so
that pick goes straight to the message that was current in the show
view and it adds target to notmuch-pick-refresh-view so that the
current message is preserved.
Pick keeps point roughly at the top of the buffer while inserting
messages at the end as they come in (from the async
parser). Previously the save-excursion to do this was done once for
each thread inserted: now it is done for each individual message.
The advantage is that the message insertion code can decide where to
leave point. In the next patch point will be left on the target message.
Note notmuch-pick-insert-msg is unchanged as that is used by the tag
display update code.
Currently mime parts are basically handled based on their mime-type
with the exception of application/octet-stream parts. Deal with these
parts at the top level (notmuch-show-insert-bodypart).
This is needed later in the series as we need to put in a part button
for each part (which means knowing its mime type) while deferring the
actual insertion of the part.
Apparently Emacs provides a function to stringify errors properly.
Use this in the search sentinel where we have to do our own error
messaging, rather than assuming the first error argument will be the
descriptive string.
When compiling notmuch-tag.el there is a compile warning:
notmuch-tag.el:27:1:Warning: cl package required at runtime
Since we have decided to allow runtime use of cl we suppress this
warning by adding a tail comment to the file.
Somehow this file was not added to the patch set which split the tests
into time and memory tests. Take advantage of the the "new" way of
running tests to avoid listing the explicitly.
Presently, the code which finds the parent of a message as it is being
added to the database assumes that the first Message-ID-like substring
of the In-Reply-To header is the parent Message ID. Some mail clients,
however, put stuff other than the Message-ID of the parent in the
In-Reply-To header, such as the email address of the sender of the
parent. This can fool notmuch.
The updated algorithm prefers the last Message ID in the References
header. The References header lists messages oldest-first, so the last
Message ID is the parent (RFC2822, p. 24). The References header is
also less likely to be in a non-standard
syntax (http://cr.yp.to/immhf/thread.html,
http://www.jwz.org/doc/threading.html). In case the References header
is not to be found, fall back to the old behavior.
V2 of this patch, incorporating feedback from Jani and (indirectly)
Austin.
The support for emacs version 22 has not worked at least since
September 2011 when I attempted to use it. I expanded the support in
id:yf6ippgtbn0.fsf@taco2.nixu.fi but that was not enough and then I
found it easier to switch to emacs 23.
In case one wants to resurrect emacs 22 (or earlier!) support, pick
the changes from the patch email referenced above.
Added a customizable variable notmuch-address-selection-function
and the function with the same name to provide a way for user to
change the function called to do address selection.
By default the functionality is exactly the same as it has been so
far; completing-read is called with the same parameters as before.
Setting equivalent lambda expression in place of using
notmuch-address-selection-function function is done as follows:
(setq notmuch-address-selection-function
(lambda (prompt collection initial-input)
(completing-read prompt collection nil nil initial-input)))
For example drop-in replacement with ido-completing-read can be done
easily as an one alternative to the default.
The use of realpath(3) in
commit 58ed67992d
Author: Jani Nikula <jani@nikula.org>
Date: Sun Apr 7 20:15:03 2013 +0300
cli: config: do not overwrite symlinks when saving config file
broke config file save when the file does not exist, which results in
'notmuch setup' always failing to create a new config file.
Fix by checking ENOENT from realpath(3).
Highlight "excluded messages" as a term with a meaning that
may not be obvious.
Be explicit about the effects of search --exclude=true and
--exclude=false.
The notmuch-addrlookup utility uses a third party library to read the
notmuch configuration file. The previously used implementation at
"github.com/kless/goconfig" vanished, so this patch switches to the
implementation at "github.com/msbranco/goconfig". As the
implementations differ at the API level, the code is updated
accordingly.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
Xapian::TermIterator::operator* returns std::string which is destroyed
as soon as (*i).c_str() finishes. The remembered pointer 'term' then
references invalid memory.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Some (declare-function ...) definitions were drifted away from the
actual (defun ...)'s. To find the drifts and to verify changes
the following command line was used:
$ emacs --batch -L emacs --eval '(check-declare-directory "emacs")'
