Now that we understand the bug here, we rename this test to
search-insufficient-from-quoting to clarify the bug being exercised,
(which occurs when the From: line contains an unquoted '.' character).
We also mark these tests as expected failures until the bug gets fixed.
Currently, there are two places in the test framework that contain very
long list on a single line. Whenever a test is added (or changed) in
several branches and these branches are merged, it results in conflict
which is hard to resolve because one has to go through the whole long
line to find where the conflict is.
This patch splits these long lists to several lines so that the
conflicts are easier to resolve.
Currently, whenever we call index_terms multiple times for a single
field, the term generator is being reset to position 0 each time. This
means that with text such as:
To: a@b.c, x@y.z
one can get a bogus match by searching for:
To: a@y.c
Thanks to Mark Anderson for reporting the bug, (and providing a nice,
minimal test case that inspired what is used here).
This is a new feature which is not implemente yet, so these tests mostly
fail currently. A subsequent commit will add the feature and cause these
tests to start passing.
These tests verify that we can search for containing folders of mail files
by word or by phrase and that the search terms are updated correctly when
directories are renamed.
This reverts commit f22a7ec1e2.
Interrupting the test suite due to an actual bug in a test script
would be just fine, but interrupting the run of the entire test suite
at the first test failure is unacceptable.
This code simply wasn't being exercised by the test suite before, so
this will be useful.
Meanwhile, there's currently a bug in "notmuch search --output=tags"
in that it doesn't print a final newline. But the current test suite
isn't able to catch this bug since the $() construct of the shell
doesn't preserve the distinction of whether the final newline is
present or not.
Break notmuch-test whenever a test script returns non-zero status.
This happens either when some test from the script fails or when there
is an error in the script.
This is especially useful in the latter case since the error may not
appear in the final aggregated results.
This is part of an effort to avoid proliferation of excessive
top-level notmuch commands. Also, "raw" better captures the
functionality here, (as opposed to "cat" which is a fairly oblique
reference to a bad Unix abbreviation whose metaphor doesn't work here
since "notmuch cat" operates only on a single message and hence cannot
"con'cat'enate" anything).
This command outputs a raw message matched by search term to the
standard output. It allows MUAs to access the messages for piping,
attachment manipulation, etc. by running notmuch cat rather then
directly access the file. This will simplify the MUAs when they need
to operate on a remote database.
Edited-by: Carl Worth <cworth@cworth.org>: Remove trailing whitespace,
add missing "test_done" to new test script to avoid "Unexpected exit"
error.
The bash code in the test suite is using associative arrays which were
only added to bash as of release 4.0.
If the test suite is run with an older bash, we now immediately error
out and explain the situation, (instead of emitting confusing error
messages and failing dozens of tests, which is what happened before
this change).
Now that we can usefully pass section names via the NOTMUCH_SKIP_TESTS
environment variable, it's useful to actually print those names out
for the user. Then, since we're now printing these names, let's use
nicer names, (not excessively long but also not using abbreviations
like "msg").
The numbers were meaningless, and they made it hard to find a file of interest.
Instead, we get the ordering we want by adding an explicit list of
tests to run to the notmuch-test script.
This makes the new, git-derived test suite report results in a manner
similar to the original notmuch test suite.
Notable changes include:
* No more initial '*' on every line
* Only colorize a single word
* Don't print useless test numbers
* Use "PASS" in place of "ok"
* Begin sentences with a capital letter
* Print test descriptions for each block
* Separate each block of tests with a blank line
* Don't summarize counts between each block
This avoids "make test" emitting messages from three (3!) recursive
invocations of make. We change the invocations of the tests themselves
to occur directly from the shell script rather than having the shell
script invoke make again and using wildcards in the Makefile.
The changes are:
- The notmuch-test was split into several files (t000?-*.sh).
- Removed helper functions which were moved to test-lib.sh
- Replaced every printf with test_expect_success.
- Test commands chained with && (test-lib.sh doesn't use "set -e" in
order to complete the test suite even if something fails)
- Many variables such as ${MAIL_DIR} were properly quoted as they
contain spaces.
- Changed quoting patterns in add_message and generate_message (single
quotes are already used by the test framework).
- ${TEST_DIR} replaced by ${PWD}
QUICK HOWTO:
To run the whole test suite
make
To run only a single test
./t0001-new.sh
To stop on the first error
./t0001-new.sh -i
then mail store and database can be inspected in
"trash directory.t0001-new"
To see the output of tests
./t0001-new.sh -v
To not remove trash directory at the end:
./t0001-new.sh -d
To run all tests verbosely:
make GIT_TEST_OPTS="-v"
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Micah Anderson reported an issue where a message failed to display in
the emacs interface, (it instead gave an error, "json-read-string: Bad
string format").
Micah tracked this down to the json output from "notmuch show" being
interrupted by a GMime error message:
gmime-CRITICAL **: g_mime_stream_filter_add: assertion
`GMIME_IS_FILTER (filter)
I tracked this down further to notmuch passing a NULL value to
g_mime_stream_filter_add. And this was due to calling
g_mime_filter_charset_new with a value of "unknown-8bit".
So we add a test message withe a Conten-Type of "text/plain;
charset=unknown-8bit" from Micah's message. Then we fix "notmuch show"
to test for NULL before calling g_mime_stream_filter_add. Bug fixed.
Scott Henson reported an internal error that occurred when he tried to
add a message that referenced another message with a message ID well
over 300 characters in length. The bug here was running into a Xapian
limit for the length of metadata key names, (which is even more
restrictive than the Xapian limit for the length of terms).
We fix this by noticing long message ID values and instead using a
message ID of the form "notmuch-sha1-<sha1_sum_of_message_id>". That
is, we use SHA1 to generate a compressed, (but still unique), version
of the message ID.
We add support to the test suite to exercise this fix. The tests add a
message referencing the long message ID, then add the message with the
long message ID, then finally add another message referencing the long
ID. Each of these tests exercise different code paths where the
special handling is implemented.
A final test ensures that all three messages are stitched together
into a single thread---guaranteeing that the three code paths all act
consistently.
We're about to add a test with an excessively long message-id, (512
characters or so). This exceeds filename length limits, so just always
the simple counter to generate the filenames, (which we were doing for
messages with non-custom IDs anyway).
The commit said it fixed a problem with headers >200 characters
long. But examination of the code suggests that it was a header of
exactly 200 characters long that caused the problem. So we add a test
case for that here.
Before the fix in the previous commit, valgrind would detect many
errors when replying to the message created with this test case. After
that commit, those errors are gone.
Immediately after releasing 0.3 we learned that the magic-from-guessing
code could hang in an infinite loop in some cases. The bug occurred
only when the user had configured only a primary email addresss and no
other email addresses.
The test suite wasn't previously covering this case, so address this
shortcoming.
this test actually tests behavior that I consider as broken.
The Bcc should be to the same address as used in the From line,
otherwise we are creating a potential information leak as email
that is related to one email account (say, work) is copied to
a different account
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
These tests don't actually pass yet, since the feature being tested
has not been merged. But gettting these tests in first will let us
more easily test that the feature actually works, (and will help us
ensure we don't forget the feature before the next release).
right now these are not trying to be overly fancy
simply one test per strategy that we apply to figure out the best
from address - including the fallback if there's nothing to go on
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
When the test suite is run in a different time zone that where Carl
lives, some tests may fail depending on the time when the test suite is
run. For example, just now I get:
Search for all messages ("*"):... FAIL
--- test-031.expected 2010-04-23 09:33:47.898634822 +0200
+++ test-031.output 2010-04-23 09:33:47.898634822 +0200
@@ -1,5 +1,5 @@
-thread:XXX 2001-01-05 [1/1] Notmuch Test Suite; Test message #6 (inbox unread)
-thread:XXX 2001-01-05 [1/1] Notmuch Test Suite; Test message #14 (inbox unread)
+thread:XXX 2001-01-06 [1/1] Notmuch Test Suite; Test message #6 (inbox unread)
+thread:XXX 2001-01-06 [1/1] Notmuch Test Suite; Test message #14 (inbox unread)
thread:XXX 2000-01-01 [1/1] Notmuch Test Suite; body search (inbox unread)
thread:XXX 2000-01-01 [1/1] searchbyfrom; search by from (inbox unread)
thread:XXX 2000-01-01 [1/1] Notmuch Test Suite; search by to (inbox unread)
By setting a fixed time zone in the test script, these problems should
be eliminated.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
The test suite doesn't yet cover --format=json output nor UTF-8 in
subject or body.
This patch starts with test cases for 'search --format=json' and
'show --format=json'.
Furthermore, it has test cases for a search for a UTF-8 string in a mail
body for a UTF-8 string in a mail subject.
Finally, it has a test case for --format=json with UTF-8 messages,
demonstrating the fix in 1267697893-sup-4538@sam.mediasupervision.de.
Reviewed-by: Carl Worth <cworth@cworth.org>
Updated tests to current implementation of the test suite.
These tests demonstrate a bug in the current implementation
of "notmuch show --format=json", (timestamp output is changed
depending on current timezone).
If future updates to the test suite add more messages to the database
before this "notmuch show" test, then the message-ID numbers in the
expected output will all change. But we can at least compute the
numbers so that this test will continue to pass.
In the recent change to rename threads based on changing subject
lines, I broke message ordering within "notmuch show" output. But our
test suite didn't catch that regressions, because we didn't have any
tests of "notmuch show".
This adds one "notmuch show" test along with the thread-naming
tests. It's not a whole suite of "notmuch show" testing, but it does
catch this regression at least.
We're starting to get test output that's fairly long, so it's much
kinder to just show a diff rather than displaying the complete
expected and actual output. To allow the user to investigate things
after the fact, we save the expected and actual output to files named
test-${test_number}.expected and test-${test_number}.output .
We recently added a feature to name threads based on the messages that
actually matched the search, (as opposed to simply the oldest or
newest message in the thread whether it matched or not). So add tests
for that, and (surprise, surprise!) the feature does not entirely
work.
Hurrah---no more manual verification of that PASS column.
This means that "make test" can actually be a useful part of the
release process now, (since it will exit with non-zero status if there
are any failures).
Previously some tests (dump/restore) were doing ad-hoc verification of
values and their own printing of PASS/FAIL, etc. This made it
impossible to count test pass/fail rates in a single place.
The only reason these tests were written that way was because the old
execute_expecting function only worked if one could directly test the
stdout output of a notmuch command. The recent switch to pass_if_equal
means that all tests can use it.
This feature was added recently and should have gotten a new test at
the time.
As this test demonstrates, the code is broken, ("notmuch search '*'
returns bogus dates of the Unix epoch for any threads where the
term "and" does not appear in any messages).
Using a date in the current year makes the test suite fragile since
the search output will include a date of "January 05" for now, but
will start doing "2010-01-05" in the future.
The filenames aren't predictable (including the current directory) nor
stable from one run to the next (including the PID). This makes it
hard to predict the output from a search command that returns such a
message (such as "*").
The original goal was simply to ensure that each generated message was
distinguishable somehow. So just use the message counter instead.
The old execute_expecting function was doing far too much for its own
good. One of the worst aspects of this was that it introduced
shell-quoting challengers where the caller could not easily control
the precise invocation of the command to be executed.
I personally couldn't find a way to test "notmuch search '*'" without
the shell expanding * against files in the current directory, or
having bogus quotation marks appearing in the search string,
(defeating the recognition of "*" as a special search term).
Hopefully this aspect of the test suite will be much easier to maintain now.
The recent fix to properly decode encoded headers made the expected
output of "notmuch reply" differ by a single space, (previously, there
were two spaces before the References: value and now there is just
one).
Fix the test suite so that these are all noted as correct results
again.
These new tests demonstrate a bug as follows:
Multiple messages are added to the database
All of these message references a common parent
The parent message does not exist in the databas
In this scenario, the messages will not be recognized as belonging to
the same thread. We consider this a bug, and the new tests treat this
as a failure.
Edited by Carl Worth <cworth@cworth.org>: Split these tests into their
own commit (before the fix of the bug). This lets me see the actual
failure in the test suite, before the fix is applied. Also fix the
alignment of new messages from test suite, (so that the PASS portions
all line up---which is important while we're still manually verifying
test-suite results).
These results have all the same terms as the target phrase, but
not in the expected order. They are designed to ensure that we
actually test phrase searches.
And as it turns out, we're not currently quoting the search terms
properly, so the phrase-search tests now fail with this commit.
The sequential identifiers have the advantage of being guaranteed to
be unique (until we overflow a 64-bit unsigned integer), and also take
up half as much space in the "notmuch search" output (16 columns
rather than 32).
This change also has the side effect of fixing a bug where notmuch
could block on /dev/random at startup (waiting for some entropy to
appear). This bug was hit hard by the test suite, (which could easily
exhaust the available entropy on common systems---resulting in large
delays of the test suite).
