GMime 3.0 is over 2 years old now, and 2.6 has been deprecated in
notmuch for about 1.5 years.
Comments and documentation no longer need to refer to GMime 2.6, so
clean them all up.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
If e.g. /lib is a link to /usr/lib, then the latter may not show up in
the way we expect in the output of ldconfig. 'test foo -ef bar' checks
if foo and bar have the same device and inode numbers. Since (at least
in bash, dash, ksh, and zsh) the shell dereferences symlinks before
applying the test, this includes both the case where file1 is equal to
file2 and the case where one is a symlink to the other.
This way, one can build for a different Ruby than $PATH/ruby
(e. g. different versions, or Ruby in other paths).
Signed-off-by: Thomas Schneider <qsx@chaotikum.eu>
Correct URLs that have crept into the notmuch codebase with http://
when https:// is possible.
As part of this conversion, this changeset also indicates the current
preferred upstream URLs for both gmime and sup. the new URLs are
https-enabled, the old ones are not.
This also fixes T310-emacs.sh, thanks to Bremner for catching it.
When i'm trying to understand a message signature, i care that i know
who it came from (the "validity" of the identity associated with the
key), *not* whether i'm willing to accept the keyholder's other
identity assertions (the "trust" associated with the certificate).
We've been reporting User ID information based on the "trust"
associated with the certificate, because GMime didn't clearly expose
the validity of the User IDs.
This change relies on fixes made in GMime 3.0.3 and later which
include https://github.com/jstedfast/gmime/pull/18.
"notmuch help" doesn't mention "notmuch-emacs-mua" even though we
support it through the try_external_command() mechanism.
In addition, "notmuch help emacs-mua" doesn't work, even though we
ship the appropriate manpage.
This changeset fixes both of these problems.
python2 is going to be deprecated, and python3-sphinx is available all
the way back to oldoldstable. let's use the more modern version.
To make this work and still ship the manpages, tell ./configure to
prefer python3 over python, if it exists.
This flag should make it easier to write the code for session-key
handling.
Note that this only works for GMime 2.6.21 and later (the session key
interface wasn't available before then). It should be fine to build
the rest of notmuch if this functionality isn't available.
Note that this also adds the "session_key" built_with() aspect to
libnotmuch.
The advantage of having a target as opposed to running cppcheck by
hand
- reuse list of source files
- output errors in a format parsable, e.g. by emacs
- returns exit code 1 on any error, for possibly use in other
targets.
For the moment, leave this as an optional target. If desired, it can
be added to e.g. the release targets in the same way as the test
target.
Using two levels of directory for the stamps is arguably
overengineering, but it doesn't really cost anything, and leaves open
the possibility of putting other kinds of stamp files there.
This only checks "new" source files (w.r.t. their last check). A future target
(cppcheck-all ?) could blow away the stamp files first.
When configure could not get past initial compiler sanity check
the user was left with no explanation why this happened (usually
the reason is that compilers are not installed).
By printing the executed command line and re-executing it without
output redirection user gets better information how to proceed
(or ask for help) to resolve this problem.
The shell builtin 'printf' is used to print the executed command
line to ensure verbatim output.
At least Fedora and Debian now use
/usr/share/bash-completion/completions now. Apparently
/etc/bash_completion.d will be phased out at some point in the future.
Make test-lib-common.sh load test-lib-<$PLATFORM>.sh to create
additional shim for platform specifics.
Use test-lib-FREEBSD.sh to call GNU utilities instead of native ones.
- amended by db following Tomi's suggestions
In addition to use ${srcdir} and deliver ${NOTMUCH_SRCDIR} where needed,
source from ruby bindings had to be copied to the out-of-tree target
directory -- if the source files in source directory were referenced
in build and there were also built object files there, those could have
been considered as target files (and then not found when attempting
to create bindings/ruby/notmuch.so).
The ${srcdir} -- usually relative path to notmuch source -- works fine
in current ./configure and all makefiles. To have simple access to
notmuch source in tests and out of tree builds holding absolute path to
the source directory is useful.
When pkg-config does not find configure, a compat version of the
zlib.pc is created. In creation of that configure attempted to
read values of $zlib_cflags and $zlib_ldflags. In the usual case
those were undefined, and with `set -a` now in the beginning of
configure, configure broke.
Even if $zlib_cflags and $zlib_ldflags had values which were used
to create zlib.pc, the values were overwritten (with static content)
a few lines later in next pkg-config --cflags and --libs run. These
values would not be different and probably useless -- the following
boild would probably fail.
But instead of using those, CPATH and LIBRARY_PATH environment
variables can be used successfully (both while configuring and
building).
This is primarily intended for use in the test suite (since notmuch
builds fine without gnupg installed). Thus we only write the variable
to sh.config.
Removing the removal of byteorder configure test files was overlooked
in commit 5a957c3f33 ("build & util: drop byte order configure check
and endian util header"). Finish the job.
With the removal of the embedded libsha1, we lost the first and last
user of the platform byte order checks. Remove them from configure,
and remove the endian util header.
Since the sed expansion line which did $prefix expansion for
libdir_expanded was changed from the legacy `...` format to the
new $(...) expression, the subtle backslash expansion change went
unnoticed -- \\$ which used to escape '$' now escapes '\' and the
following '$prefix' was attempted to expand as a variable. So
changing \\$ to \$ fixes this.
Also, replaced echo with printf %s -- echo does expansions of its own.
While at it, the following 2 inconsistencies were fixed:
1) the /g flag was removed from first expression; second didn't have it
2) first expression did not end with /, so "dropped" it from second
configure | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
There is really no need to have a separate install target for the
desktop file. Just install the desktop file with emacs, with a
configure option to opt out.
It seems that no-one tried to compile without Xapian compact support
since March of 2015, since that's when I introduced a syntax error in
that branch of the ifdef.
Given the choice of maintaining this underused branch of code, or
bumping the Xapian dependency to a version from 2011, it seems
reasonable to do the latter.
Since commit
124a67e96e: configure: add set -u
all variables must be set before their expansion are attempted. These
2 variables: "platform" and "linker_resolves_library_dependencies" were
not given value in the final 'else' branch when platform check failed
due to unrecognized kernel name (output of `uname`). Now those two are
given reasonable non-empty values.
Add option to explicitly disable API man page build even if doxygen
binary is available. --without-docs also implies not building API
manpage.
This change intended to add more distinctness into build system and
allow user not to build unwanted man pages.
Xapian 1.3 has introduced the DB_RETRY_LOCK flag (Xapian bug
275). Detect it in configure and optionally use it. With this flag
commands that need the write lock will wait for their turn instead of
aborting when it's not immediately available.
Amended by db: allow disabling in configure
Many of the external links found in the notmuch source can be resolved
using https instead of http. This changeset addresses as many as i
could find, without touching the e-mail corpus or expected outputs
found in tests.
By combining the common parts of CONFIGURE_CFLAGS and CONFIGURE_CXXFLAGS
to a separate make variable and using that as part of their
definitions makes setting of these easier, DRYer and less error prone
(especially as we cannot check potential typing errors there).
In case of any unset variable, make ./configure exit with nonzero value;
an attempt to expand an unset variable is a bug in the script
(usually a spelling mistake) and those should not pass through
unnoticed.
