The intent of the 'notmuch-jump-key' face is to allow users/themes to
differentiate the text of the minibuffer prompt from the keys that are
associated with jump actions. Commit 5cc106b0 correctly introduced the
'notmuch-jump-key' face for keys, but mistakenly applied it to the
prompt as well.
The minibuffer-prompt face that was used before made it impossible to
differentiate between two distinct UI elements: (i) the prompt's text
which itself cannot be acted upon, (ii) the actionable keys used to
jump to searches/tags.
The use of a named face, notmuch-jump-key, makes it possible for users
or theme developers to apply properties that are specific to each of
those two cases.
In the interest of backward compatibility, the new face inherits from
minibuffer-prompt.
We need to load `cl-lib' at run-time because we use more from it than
just macros. Never-the-less many, but not all libraries required it
only at compile-time, which we got away with because at least some
libraries already required it at run-time as well.
We use `cl-lib' and (currently to a lesser extend) `pcase' throughout
the code-base, which means that we should require these features in
most libraries.
In the past we tried to only require these features in just the
libraries that actually need them, without fully succeeding. We did
not succeed in doing so because that means we would have to check
every time that we use a function from these features whether they
are already being required in the current library.
An alternative would be to add the `require' forms at the top of every
library but that is a bit annoying too.
In order to make sure that these features are loaded when needed but
also to keep the noise down we only require them in "notmuch-lib.el",
which most other libraries require, and in most of the few libraries
that do not do so, namely "notmuch-draft.el", "notmuch-message.el" and
"notmuch-parser.el". ("coolj.el", "make-deps.el", various generated
libraries, and "notmuch-compat.el" are left touched.)
The previous commit switched to lexical-binding but without dealing
with the new warnings about unused lexical arguments and variables.
This commit deals with most of them, in most cases by either removing
leftover bindings that are actually unnecessary, or by marking certain
arguments as "known to be unused" by prefixing their names with "_".
In the case of the functions named `notmuch-show-insert-...' the
amount of silencing that is required is a bit extreme and we might
want to investigate if there is a better way.
In the case of `notmuch-mua-mail', ignoring CONTINUE means that we do
not fully follow the intended behavior described in `compose-mail's
doc-string.
Doing so causes many new compile warnings. Some of these warnings
concern genuine changes in behavior that have to be addressed right
away.
Many other warnings are due to unused variables. Nothing has changed
here, except that the byte-compiler can now detect these pre-existing
and harmless issues. We delay addressing these issues so that we can
focus on the important ones here.
A third group of warnings concern arguments that are not actually used
inside the function but which cannot be removed because the functions
signature is dictated by some outside convention. Silencing these
warning is also delayed until subsequent commits.
`outline-minor-mode' treats comments that begin with three or more
semicolons as headings. That makes it very convenient to navigate
code and to show/hide parts of a file.
Elips libraries typically have four top-level sections, e.g.:
;;; notmuch.el --- run notmuch within emacs...
;;; Commentary:...
;;; Code:...
;;; notmuch.el ends here
In this package many libraries lack a "Commentary:" section, which is
not optimal but okay for most libraries, except major entry points.
Depending on how one chooses to look at it, the "... ends here" line
is not really a heading that begins a section, because it should never
have a "section" body (after all it marks eof).
If the file is rather short, then I left "Code:" as the only section
that contains code. Otherwise I split the file into multiple sibling
sections. The "Code:" section continues to contain `require' and
`declare-function' forms and other such "front matter".
If and only if I have split the code into multiple sections anyway,
then I also added an additional section named just "_" before the
`provide' form and shortly before the "...end here" line. This
section could also be called "Back matter", but I feel it would be
distracting to be that explicit about it. (The IMO unnecessary but
unfortunately still obligatory "... ends here" line is already
distracting enough as far as I am concerned.)
Before this commit some libraries already uses section headings, some
of them consistently. When a library already had some headings, then
this commit often sticks to that style, even at the cost inconsistent
styling across all libraries.
A very limited number of variable and function definitions have to be
moved around because they would otherwise end up in sections they do
not belong into.
Sections, including but not limited to their heading, can and should
be further improved in the future.
Notmuch requires at least version 25 of Emacs now.
Adjust comments that previously referenced version 24 specifically,
even though they also apply to later releases. Remove documentation
and code that no longer applies.
- `mm-shr' no longer references `gnus-inhibit-images'.
Doing that is better than using an `autoload' form because the latter
may result in dependencies getting hidden and indeed it turns out we
have to declare `notmuch-jump' in "notmuch-tag.el".
Most people who write lots of lisp tend to only sparsely use empty
"separator" lines within forms. In lisp they feel unnecessary and
since most files stick to this convention we get a bit confused
when there are extra empty lines. It feels like the s-expressions
are falling into pieces.
All of this is especially true between a function's doc-string and
body because the doc-string is colored differently, which visually
already separates it quite sufficiently from the code that follows.
Fixed emacs docstrings to be consistent. No functional change.
- removed some (accidental) indentation
- removed some trailing newlines
- added trailing periods where missing (some exclusions)
Starting with Emacs 27 the old `cl' implementation is finally
considered obsolete. Previously its use was strongly discouraged
at run-time but one was still allowed to use it at compile-time.
For the most part the transition is very simple and boils down to
adding the "cl-" prefix to some symbols. A few replacements do not
follow that simple pattern; e.g. `first' is replaced with `car',
even though the alias `cl-first' exists, because the latter is not
idiomatic emacs-lisp.
In a few cases we start using `pcase-let' or `pcase-lambda' instead
of renaming e.g. `first' to `car'. That way we can remind the reader
of the meaning of the various parts of the data that is being
deconstructed.
An obsolete `lexical-let' and a `lexical-let*' are replaced with their
regular variants `let' and `let*' even though we do not at the same
time enable `lexical-binding' for that file. That is the right thing
to do because it does not actually make a difference in those cases
whether lexical bindings are used or not, and because this should be
enabled in a separate commit.
We need to explicitly depend on the `cl-lib' package because Emacs
24.1 and 24.2 lack that library. When using these releases we end
up using the backport from GNU Elpa.
We need to explicitly require the `pcase' library because
`pcase-dolist' was not autoloaded until Emacs 25.1.
Saved searches in notmuch-hello and notmuch-jump can specify whether
to use search mode or tree mode. This adds an option for them to
specify unthreaded mode.
notmuch jump allows the user to specify a key sequence rather than
just a single key for its bindings. However, it doesn't show what has
already been typed so it can be difficult to see what has
happened. This makes each key press appear, and the jump menu reduce
to the possible follow up keys.
We also bind backspace (emacs symbol DEL) to go back up a level in the
subjumpmaps, and to exit from the top level.
Many of the external links found in the notmuch source can be resolved
using https instead of http. This changeset addresses as many as i
could find, without touching the e-mail corpus or expected outputs
found in tests.
This patch allows the user to customize a saved search to choose tree
view rather than the default search view. It also updates notmuch-jump
so that it respects this choice.
notmuch-jump uses window-body-width which is not defined in emacs
23. To get around this it does
(unless (fboundp 'window-body-width)
;; Compatibility for Emacs pre-24
(defalias 'window-body-width 'window-width))
This makes sure window-body-width is defined and all should be
well. But it seems that the byte compiler does not realise that this
guarantees that window-body-width will be defined and so, when
compiling with emacs 23, it gives an error
In end of data:
notmuch-jump.el:172:1:Warning: the function `window-body-width' is not known to be defined.
Domo and I came to following on irc: wrap the (unless (fboundp ...))
inside eval-and-compile which ensures that both the test and the
defalias (if needed) happen at both compile and load time. This fixes
the warning.
default-value needs its argument to be quoted.
Slightly strangely default-value of 't or nil is 't or nil
respectively so the code
(default-value notmuch-search-oldest-first)
just gives the current value of notmuch-search-oldest-first rather
than intended default-value of this variable.
The symptom is that if you are in a search buffer and use notmuch jump
to run a saved search which does not have an explicitly set sort order
then the sort order of the saved-search is inherited from the current
search buffer rather than being the default search order.
Thanks to Jani for finding the bug.
Fix byte compiler warning "Warning: the function `window-body-width'
is not known to be defined." by moving our compatibility wrapper
before its use and simplify the definition to a defalias for the old
name of the function.
This introduces notmuch-jump, which is like a user-friendly,
user-configurable global prefix map for saved searches. This provides
a non-modal and much faster way to access saved searches than
notmuch-hello.
A user configures shortcut keys in notmuch-saved-searches, which are
immediately accessible from anywhere in Notmuch under the "j" key (for
"jump"). When the user hits "j", the minibuffer immediately shows a
helpful table of bindings reminiscent of a completions buffer.
This code is a combination of work from myself (originally,
"notmuch-go"), David Edmondson, and modifications from Mark Walters.
