It seems our previous attempt with order-only targets was not
sufficient to avoid problems with sphinx-builds doctree cache [0].
Looking around at other people's approaches [1], using separate
doctrees was suggested. I guess there might be a slight loss of
efficiency, but it seems more robust.
[0]: build failures were first noticed in Debian experimental, but I was able to duplicate it in
my usual build environment about 1 in 8 builds.
[1]: in particular
9e3fc1657d
The new `body:` field (in Xapian terms) or prefix (in slightly
sloppier notmuch) terms allows matching terms that occur only in the
body.
Unprefixed query terms should continue to match anywhere (header or
body) in the message.
This follows a suggestion of Olly Betts to use the facility (since
Xapian 1.0.4) to add the same field with multiple prefixes. The double
indexing of previous versions is thus replaced with a query time
expension of unprefixed query terms to the various prefixed
equivalent.
Reindexing will be needed for 'body:' searches to work correctly;
otherwise they will also match messages where the term occur in
headers (demonstrated by the new tests in T530-upgrade.sh)
Without this change, we see this during the build:
sphinx-build -b html -d doc/_build/doctrees -q ./doc doc/_build/html
…/doc/notmuch-emacs.rst:67: WARNING: Unexpected indentation.
…/doc/notmuch-emacs.rst:165: WARNING: Unexpected indentation.
…/doc/notmuch-emacs.rst:306: WARNING: Unexpected indentation.
This source change doesn't seem to have any effect on the generated
HTML, at least.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This should silence some warnings about the jobserver, but also make
it easier to build the docs where GNU make is called something other
than make.
Based on a patch from aidecoe.
In certain conditions the parallel calls to sphinx-build could
collide, yielding a crash like
Exception occurred:
File "/usr/lib/python3/dist-packages/sphinx/environment.py", line 1261, in get_doctree
doctree = pickle.load(f)
EOFError: Ran out of input
Many of the manpages didn't treat literal text as literal text. I've
tried to normalize some of the restructured text to make it a bit more
regular.
several of the synopsis lines are still untouched by this cleanup, but
i'm not sure what the right way to represent those is in .rst,
actually.
In particular find that if i rebuild the manpages, sometimes i end up
with some of the synopsis lines showing – (U+2013 EN DASH) where they
should have -- (2 × U+002D HYPHEN-MINUS) in the generated nroff
output, though i have not tracked down the source of this error yet.
This is mainly to improve discoverability. It seems that doing
variable cross-references is not easy without using some sphinx
extension/customization.
Add fancy new feature, which makes "notmuch show" capable of actually
indexing messages that it just decrypted.
This enables a workflow where messages can come in in the background
and be indexed using "--decrypt=auto". But when showing an encrypted
message for the first time, it gets automatically indexed.
This is something of a departure for "notmuch show" -- in particular,
because it requires read/write access to the database. However, this
might be a common use case -- people get mail delivered and indexed in
the background, but only want access to their secret key to happen
when they're directly interacting with notmuch itself.
In such a scenario, they couldn't search newly-delivered, encrypted
messages, but they could search for them once they've read them.
Documentation of this new feature also uses a table form, similar to
that found in the description of index.decrypt in notmuch-config(1).
A notmuch UI that wants to facilitate this workflow while also
offering an interactive search interface might instead make use of
these additional commands while the user is at the console:
Count received encrypted messages (if > 0, there are some things we
haven't yet tried to index, and therefore can't yet search):
notmuch count tag:encrypted and \
not property:index.decryption=success and \
not property:index.decryption=failure
Reindex those messages:
notmuch reindex --try-decrypt=true tag:encrypted and \
not property:index.decryption=success and \
not property:index.decryption=failure
I think we've diverged enough from the Xapian query parser
that we can't rely on that syntax description [1]. As far as I can
tell, [1] also only discusses quotes in the context of phrases.
[1]: https://xapian.org/docs/queryparser.html
Currently, notmuch has the levers needed to set coherent crypto policy
around how cleartext is indexed, which also has an impact on how
messages are rendered. But we don't have a lot of documentation about
how to do sensible things. This is an initial attempt to address
that.
The first example shows a way to selectively index specific messages.
The next two examples are about aligning the existing database with
crypto indexing policy
The default crypto policy is to not index cleartext, and to only
decrypt messages on display when explicitly requested.
The other sensible crypto policy is to index cleartext while stashing
session keys. messages indexed in this way will be searchable, and
will be decrypted on display automatically unless the user explicitly
asks for it to *not* be decrypted.
The policy for indexing *new* messages is stored in the database as
the config variable index.decrypt.
But setting policy for new messages doesn't retroactively affect
already indexed messages.
This patch attempts to document ways that someone can efficiently
align their pre-existing database with their new policy.
I'm not sure this is the right place to document these examples, but i
do want them to be user-facing and relatively easy to find. I'm happy
to entertain suggestions for where else we should put them.
In some cases (e.g. when building a publicly-visible e-mail archive)
it doesn't make any sense to restrict visibility of the message to the
current user account.
This adds a --world-readable boolean option for "notmuch insert", so
that those who want to archive their mail publicly can feed their
archiver with:
notmuch insert --world-readable
Other local delivery agents (postfix's local, and dovecot's lda) all
default to delivery in mode 0600 rather than relying on the user's
umask, so this fix doesn't change the default.
Also, this does not override the user's umask. if the umask is
already set tight, it will not become looser as the result of passing
--world-readable.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Need to be clearer about specifying time ranges using timestamps.
Legacy syntax which predates the date prefix is still supported, but
timestamps used in conjunction with the date prefix require additional
syntax.
Make all parameter descriptions etc. use reStructuredText definition
lists with uniform style and indentation. Remove redundant indentation
from around the lists. Remove blank lines between term lines and
definition blocks. Use four spaces for indentation.
This is almost completely whitespace and paragraph reflow changes.
This brings the --decrypt argument to "notmuch reply" into line with
the other --decrypt arguments (in "show", "new", "insert", and
"reindex"). This patch is really just about bringing consistency to
the user interface.
We also use the recommended form in the emacs MUA when replying, and
update test T350 to match.
We also expand tab completion for it, update the emacs bindings, and
update T350, T357, and T450 to match.
Make use of the bool-to-keyword backward-compatibility feature.
Add support for using /<regex>/ style regular expressions in
new.ignore, mixed with the old style verbatim file and directory
basenames. The regex is matched against the relative path from the
database path.
Having first a list of prefixes followed by detailed descriptions was
viable when we didn't have all that many prefixes. Now, arranging the
prefix descriptions in a definition list makes more sense.
While at it, include all the supported prefix forms, especially some
missing regex ones.
Now that the range of sensible decryption policies has come into full
view, we take a bit of space to document the distinctions.
Most people will use either "auto" or "true" -- but we provide "false"
and "nostash" to handle use cases that might reasonably be requested.
Note also that these can be combined in sensible ways. Like, if your
mail comes in regularly to a service that doesn't have access to your
secret keys, but does have access to your index, and you feel
comfortable adding selected encrypted messages to the index after
you've read them, you could stay in "auto" normally, and then when you
find yourself reading an indexable message (e.g. one you want to be
able to search for in the future, and that you don't mind exposing to
whatever entities have access to your inde), you can do:
notmuch reindex --decrypt=true id:whatever@example.biz
That leaves your default the same (still "auto") but you get the
cleartext index and stashed session key benefits for that particular
message.
