notmuch_database_find_message_by_filename is mostly stolen from
notmuch_database_remove_message, so this patch also vastly simplfies
the latter using the former.
This API is also useful in its own right and will be used in a later
patch for eager maildir flag synchronization.
notmuch_database_t now keeps a nesting count and we only start a
transaction or commit for the outermost atomic section.
Introduces a new error, NOTMUCH_STATUS_UNBALANCED_ATOMIC.
Various typo fixes in comments within the source code.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
source-code comments, (and fixed fix of "descriptios" to "descriptors"
rather than "descriptions").
This is to prevent notmuch from destroying any information the user
has encoded as flags in the maildir filename. Tests are also added to
the test suite to verify the documented behavior.
Some people use notmuch with non-maildir files, (for example, email
messages in MH format, or else cool things like using sluk[*] to suck
down feeds into a format that notmuch can index).
To better support uses like that, don't do any renaming for files that
are not in a directory named either "new" or "cur".
[*] https://github.com/krl/sluk/
I had originally hoped for better semantics, such as doing nothing in
non-maildir directories, and preserving unknown maildir flags that
happen to be present.
We could still do those things, of course, but for now, remove them
from the documentation since the implementation does not do these
things yet.
Previously the documentation of notmuch_message_maildir_flags_to_tags
suggested that the presence of a flag would cause tags to be added,
(or in the case of "unread", removed). But the case of absent maildir
flags was not explicitly described.
What we actually want, is that for supported flags, the absence of the
flag in all messages causes the corresponding tag to be removed,
(or in the case of "unread", added). So document that explicitly.
This is the case recently added to the test suite as a failing test,
(so we'll need to do bug fixing before the documentation is honest
here).
This augments the existing notmuch_message_get_filename by allowing
the caller access to all filenames in the case of multiple files for a
single message.
To support this, we split the iterator (notmuch_filenames_t) away from
the list storage (notmuch_filename_list_t) where previously these were
a single object (notmuch_filenames_t). Then, whenever the user asks
for a file or filename, the message object lazily creates a complete
notmuch_filename_list_t and then:
For notmuch_message_get_filename, returns the first filename
in the list.
For notmuch_message_get_filenames, creates and returns a new
iterator for the filename list.
This rather ugly hack was recently obviated by the removal of the
notmuch_database_set_maildir_sync function. Now, clients must make
explicit calls to do any syncrhonization between maildir flags and
tags. So the library no longer needs to worry about doing inconsistent
synchronization while a message is only partially added.
Instead of having an API for setting a library-wide flag for
synchronization (notmuch_database_set_maildir_sync) we instead
implement maildir synchronization with two new library functions:
notmuch_message_maildir_flags_to_tags
and notmuch_message_tags_to_maildir_flags
These functions are nicely documented here, (though the implementation
does not quite match the documentation yet---as plainly evidenced by
the current results of the test suite).
This adds group [maildir] and key 'synchronize_flags' to the
configuration file. Its value enables (true) or diables (false) the
synchronization between notmuch tags and maildir flags. By default,
the synchronization is disabled.
This patch allows bi-directional synchronization between maildir
flags and certain tags. The flag-to-tag mapping is defined by flag2tag
array.
The synchronization works this way:
1) Whenever notmuch new is executed, the following happens:
o New messages are tagged with configured new_tags.
o For new or renamed messages with maildir info present in the file
name, the tags defined in flag2tag are either added or removed
depending on the flags from the file name.
2) Whenever notmuch tag (or notmuch restore) is executed, a new set of
flags based on the tags is constructed for every message and a new
file name is prepared based on the old file name but with the new
flags. If the flags differs and the old message was in 'new'
directory then this is replaced with 'cur' in the new file name. If
the new and old file names differ, the file is renamed and notmuch
database is updated accordingly.
The rename happens before the database is updated. In case of crash
between rename and database update, the next run of notmuch new
brings the database in sync with the mail store again.
Previously, if the underlying search_messages hit an exception and returned
NULL, this function would ignore that and return a non-NULL, (but empty)
threads object. Fix this to properly propagate the error.
Our current approach is for top-level entry poitns in the library
to have try/catch blocks that catch any Xapian exception and print
a message. Add a few missing blocks and fix up the documentation.
Previously, we always sorted the returned results by some string value,
(newest-to-oldest by default), however in some cases (as when applying
tags to a search result) we are not interested in any special order.
This introduces a NOTMUCH_SORT_UNSORTED value that does just that. It is
not used at the moment anywhere in the code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-by: Carl Worth <cworth@cworth.org>:
The original proposal for having different open modes used the name
WRITABLE. I didn't like that name, (easy to misspell as WRITEABLE even
for native English speakers). So we renamed it to READ_WRITE
immediately, but apparently some of the documentation held the old
name for a while.
This seems like a generally useful thing to support, (but the previous
support through an empty string was not convenient for some users,
(such as the command-line client).
For the case of adding a file that already exist, (with the same
filename). In this case, nothing will happen to the database, but
that wasn't clear before.
Commit cd467caf renamed notmuch_query_search to notmuch_query_search_messages.
Commit 1ba3d46f created notmuch_query_search_threads. We better keep the docs
of notmuch_query_create consistent with those changes.
Signed-off-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Edited-by: Carl Worth to explicitly list the full name of each
function being referenced.
We rename 'has_more' to 'valid' so that it can function whether
iterating in a forward or reverse direction. We also rename
'advance' to 'move_to_next' to setup parallel naming with
the proposed functions 'move_to_first', 'move_to_last', and
'move_to_previous'.
Previously we were printing a number of messages upgraded so far. The
original motivation for this was to accurately reflect the fact that
there are two passes, (so each message is processed twice and it's not
accurate to represent with a single count). But as it turns out, the
second pass takes zero time (relatively speaking) so we're still not
accounting for it.
If nothing else, the percentage-based reporting makes for a cleaner
API for the progress_notify function.
The recent support for renames in the database is our first time
(since notmuch has had more than a single user) that we have a
database format change. To support smooth upgrades we now encode a
database format version number in the Xapian metadata.
Going forward notmuch will emit a warning if used to read from a
database with a newer version than it natively supports, and will
refuse to write to a database with a newer version.
The library also provides functions to query the database format
version:
notmuch_database_get_version
to ask if notmuch wants a newer version than that:
notmuch_database_needs_upgrade
and a function to actually perform that upgrade:
notmuch_database_upgrade
Previously we had NOTMUCH_DATABASE_MODE_READ_ONLY but
NOTMUCH_STATUS_READONLY_DATABASE which was ugly and confusing. Rename
the latter to NOTMUCH_STATUS_READ_ONLY_DATABASE for consistency.
Previously, many checks were deep in the library just before a cast
operation. These have now been replaced with internal errors and new
checks have instead been added at the beginning of all top-levelentry
points requiring a read-write database.
The new checks now also use a single function for checking and
printing the error message. This will give us a convenient location to
extend the check, (such as based on database version as well).
Similar to the return value of notmuch_database_add_message, we now
enhance the return value of notmuch_database_remove_message to
indicate whether the message document was entirely removed (SUCCESS)
or whether only this filename was removed and the document exists
under other filenamed (DUPLICATE_MESSAGE_ID).
Previously, adding a filename with the same message ID as an existing
message would do nothing. But we recently fixed this to instead add
the new filename to the existing message document. So update the
documentation to match now.
This commit contains my changes to the API proposed by Keith. Nothing
is dramatically different. There are minor things like changing
notmuch_files_t to notmuch_filenames_t and then various things needed
for completeness as noticed while implementing this, (such as
notmuch_directory_destroy and notmuch_directory_set_mtime).
This will allow applications to support the removal of messages, (such
as when a file is deleted from the mail store). No removal support is
provided yet in commands such as "notmuch new".
The library interface is unchanged so far, (still just
notmuch_database_add_message), but internally, the old
_set_filename function is now _add_filename instead.
We were already storing relative mail filenames, so this is consistent
with that. Additionally, it means that directory documents remain
valid even if the database is relocated within its containing
filesystem.
As per Carl's request, this patch corrects the only value defined under
the notmuch_message_flag_t enum typedef to match the name of the type.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
When _notmuch_thread_create() is given a query string, it can return more
messages than just those matching the query. To distinguish those that
matched the query expression, the MATCHING_SEARCH flag is set
appropriately.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
This patch allows for different flags, internal to notmuch, to be set on a
message object. The patch does not define any such flags, just the
facilities to manage these flags.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
This patch adds a new function that can be used to collect a list of
unique tags from a list of messages. 'notmuch search-tags' uses the
function to get a list of tags from messages matching a search-term,
but it has the potential to be used elsewhere so we put it in the lib.
Signed-off-by: Jan Janak <jan@ryngle.com>
This patch adds a new function called notmuch_database_get_all_tags
which can be used to obtain a list of all tags from the database
(in other words, the list contains all tags from all messages). The
function produces an alphabetically sorted list.
To add support for the new function, we rip the guts off of
notmuch_message_get_tags and put them in a new generic function
called _notmuch_convert_tags. The generic function takes a
Xapian::TermIterator as argument and uses the iterator to find tags.
This makes the function usable with different Xapian objects.
Function notmuch_message_get_tags is then reimplemented to call the
generic function with message->doc.termlist_begin() as argument.
Similarly, we implement notmuch_message_database_get_all_tags, the
function calls the generic function with db->xapian_db->allterms_begin()
as argument.
Finally, notmuch_database_get_all_tags is exported through
lib/notmuch.h
Signed-off-by: Jan Janak <jan@ryngle.com>
This was a poor workaround around the fact that the existing
notmuch_threads_t object is implemented poorly. It's got a fine
iterartor-based interface, but the implementation does all of the
work up-front in _create rather than doing the work incrementally
while iterating.
So to start fixing this, first get rid of all the hacks we had working
around this. This drops the --first and --max-threads options from the
search command, (but hopefully nobody was using them
anyway---notmuch.el certainly wasn't).
Getting the count of matching threads or messages is a fairly
expensive operation. Xapian provides a very efficient mechanism that
returns an approximate value, so use that for this new command.
This returns the number of matching messages, not threads, as that is
cheap to compute.
Signed-off-by: Keith Packard <keithp@keithp.com>
We only rarely need to actually open the database for writing, but we
always create a Xapian::WritableDatabase. This has the effect of
preventing searches and like whilst updating the index.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Carl Worth <cworth@cworth.org>
This is what most people want for a _search_ command. It's often
different for actually reading mail in an inbox, (where it makes more
sense to have results displayed in chronological order), but in such a
case, ther user is likely using an interface that can simply pass the
--sort=oldest-first option to "notmuch search".
Here we're also change the sort enum from NOTMUCH_SORT_DATE and
NOTMUCH_SORT_DATE_REVERSE to NOTMUCH_SORT_OLDEST_FIRST and
NOTMUCH_SORT_NEWEST_FIRST. Similarly we replace the --reverse option
to "notmuch search" with two options: --sort=oldest-first and
--sort=newest-first.
Finally, these changes are all tracked in the emacs interface, (which
has no change in its behavior).
We now properly analyze the in-reply-to headers to create a proper
tree representing the actual thread and present the messages in this
correct thread order. Also, there's a new "depth:" value added to the
"message{" header so that clients can format the thread as desired,
(such as by indenting replies).
Note that the difference between thread results in date order and
thread results in reverse-date order is not simply a matter of
reversing the final results. When sorting in date order, the threads
are sorted by the oldest message in the thread. When sorting in
reverse-date order, the threads are sorted by the newest message in
the thread.
This difference means that we might want an explicit option in the
interface to reverse the order, (even though the default will be to
display the inbox in date order and global searches in reverse-date
order).
Note that we don't print the number of *unread* messages, but instead
the number of messages that matched the search terms. This is in
keeping with our philosophy that the inbox is nothing more than a
search view. If we search for messages with an inbox tag, then that's
what we'll get a count of. (And if somebody does want to see unread
counts, then they can search for the "unread" tag.)
Getting the number of matched messages is really nice when doing
historical searches. For example in a search like:
notmuch search tag:sent
(where the "sent" tag has been applied to all messages originating
from the user's email address)---here it's really nice to be able to
see a thread where the user just mentioned one point [1/13] vs. really
getting involved in the discussion [10/29].
The library interface now allows the caller to do incremental searches,
(such as one page of results at a time). Next we'll just need to hook
this up to "notmuch search" and the emacs interface.
It's important to have the names present for determining whether a
thread is worth reading or not. We may want to think about
abbreviating the list somehow if it is excessively long (or redundant
as in bugzilla-daemon, bugzilla-daemon, bugzilla-daemon, etc.).
This will allow for things like the database path to be specified
without any cheesy NOTMUCH_BASE environment variable. It also will
allow "notmuch reply" to recognize the user's email address when
constructing a reply in order to do the right thing, (that is, to use
the user's address to which mail was sent as From:, and not to reply
to the user's own addresses).
With this change, the "notmuch setup" command is now strictly for
changing the configuration of notmuch. It no longer creates the
database, but instead instructs the user to call "notmuch new" to do
that.
