- declare-function notmuch-unthreaded lacked file name
- declare-function notmuch-search had differently named last arg
- note: check-declare-directory did not complain about that
- declare-function notmuch-search-show-thread without nil
- some functions declared to be in different file than those
existed ("notmuch" -> "notmuch-lib")
- some related function/declare lines were (/are now) wider than
80-columns; added line breaks (and proper indentation) there
We need to load `cl-lib' at run-time because we use more from it than
just macros. Never-the-less many, but not all libraries required it
only at compile-time, which we got away with because at least some
libraries already required it at run-time as well.
We use `cl-lib' and (currently to a lesser extend) `pcase' throughout
the code-base, which means that we should require these features in
most libraries.
In the past we tried to only require these features in just the
libraries that actually need them, without fully succeeding. We did
not succeed in doing so because that means we would have to check
every time that we use a function from these features whether they
are already being required in the current library.
An alternative would be to add the `require' forms at the top of every
library but that is a bit annoying too.
In order to make sure that these features are loaded when needed but
also to keep the noise down we only require them in "notmuch-lib.el",
which most other libraries require, and in most of the few libraries
that do not do so, namely "notmuch-draft.el", "notmuch-message.el" and
"notmuch-parser.el". ("coolj.el", "make-deps.el", various generated
libraries, and "notmuch-compat.el" are left touched.)
The previous commit switched to lexical-binding but without dealing
with the new warnings about unused lexical arguments and variables.
This commit deals with most of them, in most cases by either removing
leftover bindings that are actually unnecessary, or by marking certain
arguments as "known to be unused" by prefixing their names with "_".
In the case of the functions named `notmuch-show-insert-...' the
amount of silencing that is required is a bit extreme and we might
want to investigate if there is a better way.
In the case of `notmuch-mua-mail', ignoring CONTINUE means that we do
not fully follow the intended behavior described in `compose-mail's
doc-string.
Doing so causes many new compile warnings. Some of these warnings
concern genuine changes in behavior that have to be addressed right
away.
Many other warnings are due to unused variables. Nothing has changed
here, except that the byte-compiler can now detect these pre-existing
and harmless issues. We delay addressing these issues so that we can
focus on the important ones here.
A third group of warnings concern arguments that are not actually used
inside the function but which cannot be removed because the functions
signature is dictated by some outside convention. Silencing these
warning is also delayed until subsequent commits.
`outline-minor-mode' treats comments that begin with three or more
semicolons as headings. That makes it very convenient to navigate
code and to show/hide parts of a file.
Elips libraries typically have four top-level sections, e.g.:
;;; notmuch.el --- run notmuch within emacs...
;;; Commentary:...
;;; Code:...
;;; notmuch.el ends here
In this package many libraries lack a "Commentary:" section, which is
not optimal but okay for most libraries, except major entry points.
Depending on how one chooses to look at it, the "... ends here" line
is not really a heading that begins a section, because it should never
have a "section" body (after all it marks eof).
If the file is rather short, then I left "Code:" as the only section
that contains code. Otherwise I split the file into multiple sibling
sections. The "Code:" section continues to contain `require' and
`declare-function' forms and other such "front matter".
If and only if I have split the code into multiple sections anyway,
then I also added an additional section named just "_" before the
`provide' form and shortly before the "...end here" line. This
section could also be called "Back matter", but I feel it would be
distracting to be that explicit about it. (The IMO unnecessary but
unfortunately still obligatory "... ends here" line is already
distracting enough as far as I am concerned.)
Before this commit some libraries already uses section headings, some
of them consistently. When a library already had some headings, then
this commit often sticks to that style, even at the cost inconsistent
styling across all libraries.
A very limited number of variable and function definitions have to be
moved around because they would otherwise end up in sections they do
not belong into.
Sections, including but not limited to their heading, can and should
be further improved in the future.
These functions are used as action/notify functions. That dictates
the appropriate function signatures but even though these functions
are not used for anything else they use incompatible signatures,
forcing the callers to use lambda expressions to deal with these
incompatibilities.
Fix that by adjusting the function signatures to the needs of the
only intended callers.
Two of these functions were defined as commands but because the
interactive form did not return the mandatory arguments, we know
that nobody (successfully) used these as commands.
In one case we move the location of a y-or-n-p prompt.
We could just have switched to using `cl-remove-if-not' instead,
but the two uses of the *remove-if-not function are pretty strange
to begin with so we refactor to not use any such function at all.
Previously it was defined in "notmuch-hello.el" and its name contained
"hello" solely because it replaced an anonymous function that was
mistakenly only bound in `notmuch-hello-mode-map'. But it makes more
sense to bind it in all notmuch modes and even if we did not change
that aspect it still would make no sense to have "hello" in its name.
Notmuch requires at least version 25 of Emacs now.
Adjust comments that previously referenced version 24 specifically,
even though they also apply to later releases. Remove documentation
and code that no longer applies.
- `mm-shr' no longer references `gnus-inhibit-images'.
This means that notmuch commands obey display-buffer-alist so the user
can customize how buffers show up.
It also permits the use of C-x 4 4, C-x 5 5 and C-x t t, available in
Emacs 28. For example, one can use C-x 4 4 M-x notmuch-jump-search RET
to open a saved search in another window rather than the current window.
Or in notmuch-search mode, C-x 5 5 RET to view the message at point in
a new frame.
notmuch-tree has custom buffer display logic, so bind
display-buffer-overriding-action to make pop-to-buffer-same-window
behave exactly as switch-to-buffer while that function is running.
Most people who write lots of lisp tend to only sparsely use empty
"separator" lines within forms. In lisp they feel unnecessary and
since most files stick to this convention we get a bit confused
when there are extra empty lines. It feels like the s-expressions
are falling into pieces.
All of this is especially true between a function's doc-string and
body because the doc-string is colored differently, which visually
already separates it quite sufficiently from the code that follows.
Fixed emacs docstrings to be consistent. No functional change.
- removed some (accidental) indentation
- removed some trailing newlines
- added trailing periods where missing (some exclusions)
Starting with Emacs 27 the old `cl' implementation is finally
considered obsolete. Previously its use was strongly discouraged
at run-time but one was still allowed to use it at compile-time.
For the most part the transition is very simple and boils down to
adding the "cl-" prefix to some symbols. A few replacements do not
follow that simple pattern; e.g. `first' is replaced with `car',
even though the alias `cl-first' exists, because the latter is not
idiomatic emacs-lisp.
In a few cases we start using `pcase-let' or `pcase-lambda' instead
of renaming e.g. `first' to `car'. That way we can remind the reader
of the meaning of the various parts of the data that is being
deconstructed.
An obsolete `lexical-let' and a `lexical-let*' are replaced with their
regular variants `let' and `let*' even though we do not at the same
time enable `lexical-binding' for that file. That is the right thing
to do because it does not actually make a difference in those cases
whether lexical bindings are used or not, and because this should be
enabled in a separate commit.
We need to explicitly depend on the `cl-lib' package because Emacs
24.1 and 24.2 lack that library. When using these releases we end
up using the backport from GNU Elpa.
We need to explicitly require the `pcase' library because
`pcase-dolist' was not autoloaded until Emacs 25.1.
Saved searches in notmuch-hello and notmuch-jump can specify whether
to use search mode or tree mode. This adds an option for them to
specify unthreaded mode.
This commit introduces a new 'unthreaded' search mode where each
matching message is shown on a separate line. It shares almost all of
its code with tree view. Subsequent commits will allow it to diverge
slightly in appearance.
Make the notmuch-hello refresh function (notmuch-hello-update) not
force the buffer to be displayed. All the callers call it when the
buffer is already displayed so it will only affect non-interactive
callers. Since it is just a trivial wrapper of notmuch-hello anyone
who wants to force the buffer to be displayed should just call
notmuch-hello.
Many of the external links found in the notmuch source can be resolved
using https instead of http. This changeset addresses as many as i
could find, without touching the e-mail corpus or expected outputs
found in tests.
Move the brief help text at the bottom of the hello screen to the
notmuch-hello-mode help, and promote '?' as the universal help key
across Notmuch. This unclutters the hello screen, and allows for a
more verbose description in the mode help. Hopefully, this change is
useful for both experienced and new users alike.
While at it, improve the links to Notmuch and hello screen
customization.
In emacs24 we use make-composed-keymap. It seems that if only a single
map is specified then emacs just resuses it rather than creating a
copy of it. Thus use make-sparse-keymap to force a copy.
This patch allows the user to customize a saved search to choose tree
view rather than the default search view. It also updates notmuch-jump
so that it respects this choice.
This should help new users off to a better start with the addition of
more sensible saved searches and default shortcut keys. Most existing
users have probably customized this variable and won't be affected.
This introduces notmuch-jump, which is like a user-friendly,
user-configurable global prefix map for saved searches. This provides
a non-modal and much faster way to access saved searches than
notmuch-hello.
A user configures shortcut keys in notmuch-saved-searches, which are
immediately accessible from anywhere in Notmuch under the "j" key (for
"jump"). When the user hits "j", the minibuffer immediately shows a
helpful table of bindings reminiscent of a completions buffer.
This code is a combination of work from myself (originally,
"notmuch-go"), David Edmondson, and modifications from Mark Walters.
The recent changes for saved searches introduced a bug when notmuch
was loaded after the saved search was defined. This was caused by a
utility function not being defined when the defcustom was loaded.
Fix this by moving some code around: the defcustom is moved into
notmuch-hello (which is a more natural place anyway), and the utility
functions are moved before the defcustom in notmuch-hello. We are
rather constrained as the defcustom for saved searches is the first
variable in the notmuch-hello customize window; to avoid moving this
customize the defcustom needs to be the first defcustom in
notmuch-hello, and the utility functions come before that.
This patch also renames one of the utility functions from
notmuch--saved-searches-to-plist to
notmuch-hello--saved-searches-to-plist (as it is purely local to
notmuch-hello) and corrects a couple of typo/spelling mistakes pointed
out by Tomi.
My recent changes to the saved search format broke the alphabetically
sorted saved sort option. This makes it work again.
Also update docs for saved-search sort defcustom to match the new
format.
Finally, since the saved-search list is no longer an alist change the
names in the sort function to avoid confusion.
This adds a sort-order option to saved-searches, stores it in the
saved-search buttons (widgets), and uses the stored value when the
button is pressed.
Storing the sort-order in the widget was suggested by Jani in
id:4c3876274126985683e888641b29cf18142a5eb8.1391771337.git.jani@nikula.org.
