This moves address-related functionality from search command to the
new address command. The implementation shares almost all code and
some command line options.
Options --offset and --limit were intentionally not included in the
address command, because they refer to messages numbers, which users
do not see in the output. This could confuse users because, for
example, they could see more addresses in the output that what was
specified with --limit. This functionality can be correctly
reimplemented for address subcommand later.
Also useless values of --exclude flag were not included in the address
command.
This was inspired by a patch from Jani Nikula.
Apart from the status codes for format mismatches, the non-zero exit
status codes have been arbitrary. Make the cli consistently return
either EXIT_SUCCESS or EXIT_FAILURE.
Previously, the CLI would print a deprecation warning if a client
requested any format version other than the current one. However, if
we add fields that are backwards-compatible, but want clients to be
able to depend on, we need to bump the version, but that doesn't make
the older version deprecated.
Hence, separate out the "minimum active" version and only print a
warning for requests below this version number.
As explained by Jeffrey Stedfast, the author of GMime, quoted in [1]:
> Passing the GMIME_ENABLE_RFC2047_WORKAROUNDS flag to g_mime_init()
> *should* solve the decoding problem mentioned in the thread. This
> flag should be safe to pass into g_mime_init() without any bad side
> effects and my unit tests do test that code-path.
The thread being referred to is [2].
[1] id:87bo56viyo.fsf@nikula.org
[2] id:08cb1dcd-c5db-4e33-8b09-7730cb3d59a2@gmail.com
The notmuch insert command reads a message from standard input,
writes it to a Maildir folder, and then incorporates the message into
the notmuch database. Essentially it moves the functionality of
notmuch-deliver into notmuch.
Though it could be used as an alternative to notmuch new, the reason
I want this is to allow my notmuch frontend to add postponed or sent
messages to the mail store and notmuch database, without resorting to
another tool (e.g. notmuch-deliver) nor directly modifying the maildir.
While looked good on paper, its attempted use caused confusion, complexity,
and potential for information leak when passed through wrapper scripts.
For slimmer code and to lessen demand for maintenance/support the set of
commits which added top level --stderr= option is now reverted.
With this option all writes to stderr are redirected to the specified
FILE (or to stdout on case FILE is '-'). This is immediately useful
in emacs interface as some of its exec intefaces do not provide
separation of stdout and stderr.
This allows specifying config file as a top level argument to notmuch,
and generally makes it possible to override config file options in
main(), without having to touch the subcommands.
If the config file does not exist, one will be created for the notmuch
main command and setup and help subcommands. Help is special in this
regard; the config is created just to avoid errors about missing
config, but it will not be saved.
This also makes notmuch config the talloc context for subcommands.
We now have a notmuch_config_is_new() function to query whether a
config was created or not. Change the notmuch_config_open() is_new
parameter into boolean create_new to determine whether the function
should create a new config if one doesn't exist. This reduces the
complexity of the API.
This allows top level arguments to be added to notmuch in a way that
doesn't require special handling for the plain notmuch command without
a subcommand.
This really should have been there before. I think it's better to do
the actual operation and then possibly fail writing the memory log,
but it would not be too hard to change it to abort earlier.
The commands are long deprecated, so removal is probably overdue. The
real motivation is to simplify argument handling for notmuch so that
we can migrate to the common argument parsing framework.
The argument handling in notmuch.c seems due for an overhaul, but
until then use an environment variable to specify a location to write
the talloc leak report to. This is only enabled for the (interesting)
case where some notmuch subcommand is invoked.
Currently there is a period of pain whenever we make
backward-incompatible changes to the structured output format, which
discourages not only backward-incompatible improvements to the format,
but also backwards-compatible additions that may not be "perfect". In
the end, these problems limit experimentation and innovation.
This series of patches introduces a way for CLI callers to request a
specific format version on the command line and to determine if the
CLI does not supported the requested version (and perhaps present a
useful diagnostic to the user). Since the caller requests a format
version, it's also possible for the CLI to support multiple
incompatible versions simultaneously, unlike the alternate approach of
including version information in the output.
This patch lays the groundwork by introducing a versioning convention,
standard exit codes, and a utility function to check the requested
version and produce standardized diagnostic messages and exit
statuses.
"notmuch help" now relies on a working man installation, and a correct
setting of MANPATH, for users that install in "unusual" places. This
should probably noted in NEWS before shipping.
There is still some small duplication of docs as the one line
summaries are hard coded in the binary. This seems preferable to
complicated script games, at least as long was we are using a
presentation level markup like nroff.
Run notmuch new pre and post hooks, named "pre-new" and "post-new", if
present in the notmuch hooks directory. The hooks will be run before and
after incorporating new messages to the database.
Typical use cases for pre-new and post-new hooks are fetching or delivering
new mail to the maildir, and custom tagging of the mail incorporated to the
database.
Also add command line option --no-hooks to notmuch new to bypass the hooks.
Signed-off-by: Jani Nikula <jani@nikula.org>
When I changed the calling convention to pass in all but the zero-th
argument to subcommands, I missed this one call, resulting in a
segmentation fault.
As a bonus, the syntax "notmuch --help foo" is now equivalent to
"notmuch help foo".
Add options --offset=[-]N and --limit=M to notmuch search to determine the
first result and maximum number of results to display.
Option --limit=M limits the maximum number of results to display to M.
Option --offset=[-]N skips the first N results; with the leading '-' skip
until the Nth result from the end.
Note that --offset with a negative N for thread or summary output requires
counting the number of matching threads in advance.
Signed-off-by: Jani Nikula <jani@nikula.org>
previously we deleted the subcommand name from argv before passing to
the subcommand. In this version, the deletion is done in the actual
subcommands. Although this causes some duplication of code, it allows
us to be more flexible about how we parse command line arguments in
the subcommand, including possibly using off-the-shelf routines like
getopt_long that expect the name of the command in argv[0].
The Glib docs state "Prior to any use of the type system, g_type_init() has to
be called".[1] To not do so can lead to segfaults. The g_type system is
currently used by various "filters" that operate on uuencoded text, message
headers, etc.
[1] http://developer.gnome.org/gobject/2.28/gobject-Type-Information.html#g-type-init
Various typo fixes in documentation within the code that can be made
available to the user, (emacs function help strings, "notmuch help"
output, notmuch man page, etc.).
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
documentation and fixed fix of "comman" to "common" rather than
"command".
This adds support for decrypting PGP/MIME-encrypted parts to
notmuch-show and notmuch-reply. The --decrypt option implies
--verify. Once decryption (and possibly signature verification) is
done, a new part_encstatus formatter is emitted, the part_sigstatus
formatter is emitted, and the entire multipart/encrypted part is
replaced by the contents of the encrypted part.
At the moment only a json part_encstatus formatting function is
available, even though decryption is done for all formats. Emacs
support to follow.
This is primarily for notmuch-show, although the functionality is
added to show-message. Once signatures are processed a new
part_sigstatus formatter is emitted, and the entire multipart/signed
part is replaced with the contents of the signed part.
At the moment only a json part_sigstatus formatting function is
available. Emacs support to follow.
The original work for this patch was done by
Daniel Kahn Gillmor <dkg@fifthhorseman.net>
whose help with this functionality I greatly appreciate.
Ever since we added support for "notmuch search --output=tags" the
"notmuch search-tags" command has been redundant. The recent addition
of alias support makes it easy to drop the explicit search-tags
command in favor of a simple alias that runs "notmuch search
--output=tags *".
So there's no longer any documentation of the search-tags command, but
existing scripts will not break at all.
We recently made the --part option to "notmuch show" trigger a default
format of "raw", (since the previous default of "text" is not often
useful with a single part---especially a non-text part).
Here, we update the documentation to match.
We unifed the "notmuch part" functionality into "notmuch show" where
the implementation is both simpler and more powerful. But there's no
good reason to break users of the old interface.
Add support for aliases, which are undocumented means of getting at
functionality through deprecated names. The first such alias is
"notmuch part" as implemented here.
Outputting of single MIME parts is moved to an option of notmuch show,
instead of being handled in it's own sub-command. The recent rework
of multipart mime allowed for this change but consolidating part
handling into a single recursive function (show_message_part) that
includes formatting. This allows for far simpler handling single
output of a single part, including formatting.
Previously, notmuch show flattened all output, losing information
about the nesting of the MIME hierarchy. Now, the output is properly
nested, (both in the --format=text and --format=json output), so that
clients can analyze the original MIME structure.
Internally, this required splitting the final closing delimiter out of
the various show_part functions and putting it into a new
show_part_end function instead. Also, the show_part function now
accepts a new "first" argument that is set not only for the first MIME
part of a message, but also for each first MIME part within a series
of multipart parts. This "first" argument controls the omission of a
preceding comma when printing a part (for json).
Many thanks to David Edmondson <dme@dme.org> for originally
identifying the lack of nesting in the json output and submitting an
early implementation of this feature. Thanks as well to Jameson Graef
Rollins <jrollins@finestructure.net> for carefully shepherding David's
patches through a remarkably long review process, patiently explaining
them, and providing a cleaned up series that led to this final
implementation. Jameson also provided the new emacs code here.
With talloc, we were already freeing all memory by the time we exited
the loop, but that didn't help with excess use of memory inside the
loop, (which was mostly from tallocing some objects with the incorrect
parent).
Thanks to Andrew Tridgell for sitting next to me and teaching me to
use talloc_report_full to find these leaks.
This is part of an effort to avoid proliferation of excessive
top-level notmuch commands. Also, "raw" better captures the
functionality here, (as opposed to "cat" which is a fairly oblique
reference to a bad Unix abbreviation whose metaphor doesn't work here
since "notmuch cat" operates only on a single message and hence cannot
"con'cat'enate" anything).
This command outputs a raw message matched by search term to the
standard output. It allows MUAs to access the messages for piping,
attachment manipulation, etc. by running notmuch cat rather then
directly access the file. This will simplify the MUAs when they need
to operate on a remote database.
Edited-by: Carl Worth <cworth@cworth.org>: Remove trailing whitespace,
add missing "test_done" to new test script to avoid "Unexpected exit"
error.
We previously output "notmuch version 0.1" as response to notmuch --version.
Shorten this to "notmuch 0.1" as we know that we will receive a version
number when we explicitely ask for it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
From both the implementation and from the documentation. This is
handled generically in the library for all search-based commands,
so count doesn't need special treatment.
If no parameters are given to notmuch-count, or just '' or '*' are
given, return the total number of messages in the database.
update notmuch count help
I don't really know why we ended up having everything indented by two
tabs, (perhaps trying to make it match the man page)? But wihout any
containing context to justify that it just looks odd.
The output was far too busy otherwise. It's more useful to just
show the argument list in the case of "notmuch help <command>"
for a specific command.
(Credit due to running "git help" and seeing a much more readable
list than what was coming out of "notmuch help".)
Previously, only "notmuch help" worked while a call to "notmuch --help"
would just print a message telling the user to call "notmuch help".
Instead of the redirection, just support --help directly now.
A new 'part' subcommand allows the user to extract a single part from
a MIME message. Usage:
notmuch part --part=<n> <search terms>
The search terms must match only a single message
(e.g. id:foo@bar.com). The part number specified refers to the part
identifiers output by `notmuch show'. The content of the part is
written the stdout with no formatting or identification marks. It is
not JSON formatted.
In the case of notmuch-show, "--format=json" also implies
"--entire-thread" as the thread structure is implicit in the emitted
document tree.
As a coincidence to the implementation, multipart message ID numbers are
now incremented with each part printed. This changes the previous
semantics, which were unclear and not necessary related to the actual
ordering of the message parts.
This was really the last thing keeping the initial run of "notmuch
new" being different from all other runs. And I'm taking a fresh
look at the performance of "notmuch new" anyway, so I think we can
safely drop this optimization.
This patch changes the default behaviour of notmuch show to display only
messages that match the search expression. However, --entire-thread
option is provided to display all messages in threads that matched the
search expression.
It is deemed that will be more useful for human users on the command line.
Scripts can be modified to include the --entire-thread option so that they
can display all messages once more.
Example:
$ notmuch search subject:git AND thread:23d99d0f364f93e90e15df8b42eddb5b
thread:23d99d0f364f93e90e15df8b42eddb5b July 31 [4/12] Johan Herland; [RFCv2 00/12] Foreign VCS helper program for CVS repositories (inbox unread)
Note that in this thread 4 out of 12 messages matched. The default show
behaviour is to show only those messages that match:
$ notmuch show subject:git AND thread:23d99d0f364f93e90e15df8b42eddb5b | grep 'message{' | wc -l
4
With the --entire-thread option the output will contain all dozen
messages:
$ notmuch show --entire-thread subject:git AND thread:23d99d0f364f93e90e15df8b42eddb5b | grep 'message{' | wc -l
12
Signed-off-by: Bart Trojanowski <bart@jukie.net>
This patch adds support for search-terms to 'notmuch search-tags'. If
no search-term is provided then the command returns a list of all tags
from the database.
If the user provides one or more search-terms as arguments then the
command collects tags from matching messages only.
This could be used by functions in the Emacs mode to further limit the
list of tags offered for completion. For example, functions that remove
tags from message(s) could offer only tags present in the message(s).
Signed-off-by: Jan Janak <jan@ryngle.com>
This is a new notmuch command that can be used to search for all tags
found in the database. The resulting list is alphabetically sorted.
The primary use-case for this new command is to provide the tag
completion feature in Emacs (and other interfaces).
Signed-off-by: Jan Janak <jan@ryngle.com>
This was a poor workaround around the fact that the existing
notmuch_threads_t object is implemented poorly. It's got a fine
iterartor-based interface, but the implementation does all of the
work up-front in _create rather than doing the work incrementally
while iterating.
So to start fixing this, first get rid of all the hacks we had working
around this. This drops the --first and --max-threads options from the
search command, (but hopefully nobody was using them
anyway---notmuch.el certainly wasn't).
The rudimentary aspect here is that the date ranges are specified with
UNIX timestamp values (number of seconds since 1970-01-01 UTC). One
thing that can help here is using the date program to determins
timestamps, such as:
$(date +%s -d 2009-10-01)..$(date +%s)
Long-term, we'll probably need to do our own query parsing to be able
to support directly-specified dates and also relative expressions like
"since:'2 months ago'".
Getting the count of matching threads or messages is a fairly
expensive operation. Xapian provides a very efficient mechanism that
returns an approximate value, so use that for this new command.
This returns the number of matching messages, not threads, as that is
cheap to compute.
Signed-off-by: Keith Packard <keithp@keithp.com>
For very large mail boxes, it is desirable to know which files are being
processed e.g. when a crash occurs to know which one was the cause. Also,
it may be interesting to have a better idea of how the operation is
progressing when processing mailboxes with big messages.
This patch adds support for printing messages as they are processed by
"notmuch new":
* The "new" command now supports a "--verbose" flag.
* When running in verbose mode, the file path of the message about to be
processed is printed in the following format:
current/total: /path/to/message/file
Where "current" is the number of messages processed so far and "total" is
the total count of files to be processed.
The status line is erased using an ANSI sequence "\033[K" (erase current
line from the cursor to the end of line) each time it is refreshed. This
should not pose a problem because nearly every terminal supports it.
* The signal handler for SIGALRM and the timer are not enabled when running
in verbose mode, because we are already printing progress with each file,
periodical reports are not neccessary.
We take the recently created text from the notmuch manual page and
update the "notmuch help" command to use similar text. In particular,
we add a new "notmuch help search-terms" for documenting the search
syntax that is common to several commands.
If this is run first, it will run "notmuch setup" directly. After that
is successful, it will look for a databae and tell the user to run
"notmuch new" if the database doesn't exist yet. Finally, if the
database is present, it will provide some example "notmuch search"
commands for the user to try.
It's quite possible for someone to read the documentation and run
"notmuch setup" rather than just "notmuch". In that case, we don't
want to be any less welcoming.
This will allow for things like the database path to be specified
without any cheesy NOTMUCH_BASE environment variable. It also will
allow "notmuch reply" to recognize the user's email address when
constructing a reply in order to do the right thing, (that is, to use
the user's address to which mail was sent as From:, and not to reply
to the user's own addresses).
With this change, the "notmuch setup" command is now strictly for
changing the configuration of notmuch. It no longer creates the
database, but instead instructs the user to call "notmuch new" to do
that.
The advantage here is that we actually get the necessary folding of
long headers, (particularly the References header, but also things
like Subject). This also gives us parsed recipient addresses so that
we can easily elide the sender's address(es) from the recipient list
(just as soon as we have a configured value for the recipient's
address(es)).
Reviewed-by: Carl Worth <cworth@cworth.org>
Keith wrote all the code here against notmuch before notmuch.c was
split up into multiple files. So I've pushed the code around in
various ways to match the new code structure, but have generally tried
to avoid making any changes to the behavior of the code.
I did fix one bug---a missing call to g_mime_stream_file_set_owner in
show_part which would cause "notmuch show" to go off into the weeds
when trying to show multiple messages, (since the first stream would
fclose stdout).
Now that the client sources are alone here in their own directory,
(with all the library sources down inside the lib directory), we can
break the client up into multiple files without mixing the files up.
The hope is that these smaller files will be easier to manage and
maintain.
I recently added a print of the subject line for use as part of a
two-line summary in the emacs client. But of course, the subject was
already being printed on the next line. So I didn't really need to add
anything, I could have just stopped hiding what was already
printed. Anyway, we now avoid printing it twice in a row.
The more general command is more consistent, and more useful.
We also fix "notmuch search" to output copy-and-pasteable search terms
for the thread with "thread:" prepended already. Similarly, the
message-ID in the output of "notmuch show" is also now printed as a
valid search term, ("id:<message-id>" rather than "ID: <message-id>").
Naturally, the emacs code is also changed to track these changes.
We were inadvertently calling g_object_unref on a wild pointer leading
to the following error message:
GLib-GObject-CRITICAL **: g_object_unref: assertion
`G_IS_OBJECT (object)' failed
Now, why glib doesn't abort on critical errors, I'll never understand.
I previously had a hack that special-cased the "unread" tag and
printed it on the same line as the message ID. But now that we are
printing all tags at the end of the one-line summary we don't need
this anymore. Get rid of it, and just read "unread" from the list of
tags just like any other tag.
Also hide all markers.
From here, all we really need for legibility is the following:
* Hide away citations and signatures
* Call out the one-line summary some way, (larger font size?)
* Add nesting for replies
We were previously using things like "%message{" which were not
guaranteed to never appear in an email message. Using a control
character (^L or '\f' instead of '%') gives us better assurance that
our delimiter doesn't show up in an original email message.
This still isn't entirely safe since we're decoding encoded text in
the body of the email message so almost all bets are off really.
