This changes makes the sexp query parser consistent with the infix one
in ignoring trailing '/'. Here we do a bit better and ignore any
number of trailing '/'.
This is mainly to make sure we get trailing / removal correct. Also
add regression test for path: in the infix parser matching the
existing one for folder:.
This resolves an old bug reported by David Edmondson in 2014. The fix
is only needed for the "boolean" case, as probabilistic / phrase
searching already ignores punctuation.
This fix is only for the infix (xapian provided) query parser.
[1]: id:cunoasuolcv.fsf@gargravarr.hh.sledj.net
This duplicates the bug reported in [1], as well as adding some simple
regression tests for 'path' and 'folder' searches which were
previously missing for sexp syntax.
[1]: id:cunoasuolcv.fsf@gargravarr.hh.sledj.net
In [1], David Edmondson observed that the trailing / added by many
completion mechanisms causes path searches to silently fail. This
test reproduces that bug for both `path:' and `folder:' searches.
[1]: id:cunoasuolcv.fsf@gargravarr.hh.sledj.net
It is fragile to encode the generated names into tests, as it makes
tests break when e.g. new tests are added. There is a possibility
that this will hide certain failures; in that case meaningful filenames
should be chosen for the generated messages.
These are loosely modelled on the tests just above for date ranges,
since the error conditions are similar. Some ideas also borrowed from
T570-revision-tracking.
The default argument processing overlaps somewhat with what is already
done in _notmuch_date_strings_to_query, but we can give more specific
error messages for the s-expression context.
The extra generality of _sexp_parse_range will be useful when we
implement additional range prefixes (at least 'lastmod' is needed).
This fixes the bug reported by dkg in [1]. The movement of the call to
n-m-setup-message-for-saving is so the cleanup of Fcc headers happens
in the encoded version (otherwise Fcc headers may be saved to disk).
[1]: id:87k1zm225v.fsf@fifthhorseman.net
Based on the method outlined by Daniel Kahn Gillmor in
id:87k1zm225v.fsf@fifthhorseman.net. With a delay of 0.2 seconds the
test becomes flaky on my machine. With a 1 second delay it fails
consistently for more than 1600 iterations.
This matches the heuristic used by "notmuch config set" to decide if
something is a list.
This change fixes the bug reported at [1].
[1]: id:6O3LTUhoXlrnkPWCtPJCP4cagU7mFVEdyTpcC_37BoSzStlARXDBa7oczy6hB0jyjGjBQvgj_jFV58cw0aNx-jUg1h1O-FQ7820k68C0X4M=@protonmail.com
In [1] Ian observed that notmuch setup was inconsistent with notmuch
config set when adding single items, namely adding an unneeded
semi-colon at the end. This test replicates that bug.
[1]: id:6O3LTUhoXlrnkPWCtPJCP4cagU7mFVEdyTpcC_37BoSzStlARXDBa7oczy6hB0jyjGjBQvgj_jFV58cw0aNx-jUg1h1O-FQ7820k68C0X4M=@protonmail.com
Initially only use in notmuch-hello-insert-alltags. This is a more
narrow resolution of [1], which (unlike [2]) does not disable exclude
processing for regular saved searches.
[1]: id:87wox1vovj.fsf@len.workgroup
[2]: id:20220105010606.2034601-2-david@tethera.net
Revert commit 8370e3cfe2, and remark the
corresponding test as broken. Also update the expected output of the
broken test to show excludes active in the user defined saved searches.
Commit [0] left the stemmer object accessible, but did not add
de-allocation code to notmuch_database_destroy. This commit corrects
that oversight.
Leak originally reported by Austin Ray [1].
[0]: 3202e0d1fe
[1]: id:20220105224538.m36lnjn7rf3ieonc@athena
Gregor Zattler observed that tags could be unintentionally hidden in
the "All tags" view, and Tomi Ollia worked out [2] that the issue was tags
that only occured on excluded messages. This test reproduces that bug.
[1]: id:87wox1vovj.fsf@len.workgroup
[2]: id:m28t9faaim.fsf@guru.guru-group.fi
Although it makes sense for the extra headers to be added to the copy
of the message headers included in the sexp/json, it is a bit
surprising for them to show in the new message constructed for the
reply, especially when, as here, they are always missing/empty.
This is based on a patch from Johan Parin [1], which is in turn
responding to a bug report / feature requiest from Jan Malkhovski.
The update to the structured output documented in schemata is intended
to be upward compatible, so the format version stays the same
[1]: id:20191116162723.18343-1-johan.parin@gmail.com
[2]: id:87h8sdemnr.fsf@oxij.org
Since the bug was first reported in [1], notmuch has gained the
ability to have the database located outside the mail root, hence this
this change differs slightly from Jani's proposed solution [2] in not
using notmuch_database_get_path, but rather the already retrieved
mail_root.
[1]: id:87mwhifu9a.fsf@trouble.defaultvalue.org
[2]: id:87ios5v59p.fsf@nikula.org
In [1] Rob observed that notmuch new ignored directories called
.notmuch everywhere in the tree, where they should only (and now, with
split configs, at most) be ignored at the top level. Add a test to
demonstrate the problem.
[1]: id:87mwhifu9a.fsf@trouble.defaultvalue.org
If we know the configuration is split, but there is no mail root
defined, this indicates a (lack of) configuration error. Currently
this can only arise in XDG configurations.
If notmuch_database_open_with_config finds a database, but that
database is not in a legacy, non-split configuration, then it
currently incorrectly deduces the mail root and returns SUCCESS. Add
to two tests to demonstrate this bug.
As stressed by the gpg documentation, the non-'with-colons' output
format is subject to change, and indeed it did in 2.3.x (x<=3). This
should make the the test suite more robust against such changes.
If we return regular Message objects, python will try to destroy them,
and the underlying notmuch object, causing e.g. the crash [1].
[1]: id:87sfu6utxg.fsf@tethera.net
This reproduces the bug reported at [1]. The second test hints at the
solution, making reply return OwnedMessage objects.
[1]: id:87sfu6utxg.fsf@tethera.net
It makes perfect sense for users to want to pre-create .notmuch,
e.g. to install hooks, so we should handle the case of a .notmuch
directory without an actual xapian database more gracefully.
`notmuch new' should go ahead and create the xapian database if it is
missing, even in the case where the parent .notmuch (or equivalent)
directory exists.
In [1] Mark Walters reported a problem with messages being removed
from the database when the parent directory was renamed. Jani Nikula
proposed [2] these tests but observed
This test is not suitable for merging since it's not deterministic.
After applying Jani's patch [3], the tests now pass deterministically,
and could usefully act as regression tests.
[1]: id:87siray6th.fsf@qmul.ac.uk
[2]: id:1393191650-28333-1-git-send-email-jani@nikula.org
[3]: id:1441445731-4362-2-git-send-email-jani@nikula.org
The remaining problem in this test is fixed upstream in Emacs
28. While most people are using earlier versions of emacs, the test
still provides some documentation of a known bug.
There is a certain amount of boilerplate to pass the call on the
original function, so abstract it out as a C preprocessor macro, plus
some extra includes in notmuch-test.h
Unlike the previous g_key_file_get_value, this version processes
escape codes for whitespace and \. The remaining two broken tests from
the last commit are because "notmuch config get" treats every value as
a list, and thus the previously introduces stripping of leading
whitespace applies.
glib generates the following escape characters with their usual
meanings: \n, \t, \r, and \\, along with \s for _leading_
spaces. Currently notmuch fails to unescape these on reading the
config files. These tests demonstrate this bug; the one new test that
passes is because apparently glib only escapes tabs at the beginning
of a key.
In [1] Ciprian observed that it was easy for users to mistakenly
introduce leading and trailing space to new.tags when editing a
notmuch config file. This commit strips spaces on either side of the
';' delimiter when splitting.
In principle it would be possible to support tags (or other config
values) with leading or trailing spaces by processing '\s' escapes in
the input string. Currently such processing is not done.
[1]: id:CA+Tk8fzjPLaEd3vL1f9ebk_bF_RV8PDTLzDupraTkCLCpJAmCg@mail.gmail.com
