I noticed when trying to use VERSION (and derived variables) in a
subdirectory that the top level Makefile.local needed to be included
first. But according to c10085c77b it
actually needs to be last. To break this conflict, move the variables
definitions into a new Makefile.global.
If some software other than notmuch new renames or removes files
during the notmuch new scan (specifically after scandir but before
indexing the file), keep going instead of bailing out. Failing to
index the file is just a race condition between notmuch and the other
software; the rename could happen after the notmuch new scan
anyway. It's not fatal, and we'll catch the renamed files on the next
scan.
Add a new exit code for when files vanished, so the caller has a
chance to detect the race and re-run notmuch new to recover.
Reported by Paul Wise <pabs@debian.org> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=843127
GnuPG 2.1.16 is now injecting the full issuer fingerprint in its
signatures, which makes them about 32 octets larger when
ascii-armored.
This change in size means that the size of the MIME parts will vary
depending on the version of gpg that the user has installed. at any
rate, the signature part should be non-zero (this is true for
basically any MIME part), so we just test for that instead of an exact
size.
Install man pages based on $(MAN_GZIP_FILES), which directly
corresponds to the man page source rst files. This way we can filter
the man pages to be installed as needed.
Use $(wildcard ...) to generate the list of man pages based on the rst
source files present in the man page directories, instead of reading
conf.py. This has three main benefits:
1) This makes the man page build slightly less complicated and easier
to understand. At least there are fewer moving parts.
2) This makes the build fail if we add a man page rst file, but fail
to add it to conf.py.
3) We can use Sphinx constructs in conf.py that are not available when
importing the file into a normal python program such as
mkdocdeps.py.
If Sphinx fails to create any of the roff files, having touch create
them hides the errors until someone realizes, possibly much later,
that the resulting files are empty. (Note that gzip doesn't fail on
empty input files.) Sphinx will change the timestamps of any files it
has written anyway.
Fix make sphinx-texinfo warnings:
WARNING: undefined label: notmuch-jump (if the link has no caption the
label must precede a section header)
WARNING: undefined label: notmuch-saved-searches (if the link has no
caption the label must precede a section header)
No need to repeat mostly the same information twice in conf.py. We
probably want to have a corresponding texinfo document for all the man
pages. Python list comprehension to the rescue. (The reverse is not
true; we have a texinfo document for notmuch-emacs we don't want as a
man page.)
There should be no user visible changes.
Some of the recent changes to the emacs code have used functions
introduced in emacs 24. The functions used are read-char-choice and
setq-local. This changeset adds a file notmuch-compat.el which
contains compatibility functions so that it should work on emacs
23.
Note, since these functions are taken almost unchanged from the emacs
source they are copyright the Free Software Foundation, and the header
in the file reflects that.
emacs24 and emacs23 have different secure tag defaults: in particular,
mml-secure-message-sign only signs the part on emacs23 but the whole
message on emacs24. This difference makes one of the draft tests fail
(which causes a cascade of later failures) on emacs23. It seems that
travis uses emacs23 so it is useful to fix this.
We do this by forcing the whole message to be signed in either case --
the code snippet is extracted from mml-secure-message-sign on emacs24.
Provide functionality to resume editing a message previously saved with
notmuch-draft-save, including decoding the X-Notmuch-Emacs-Secure
header.
Resume gets the raw file from notmuch and using the emacs function
mime-to-mml reconstructs the message (including attachments).
'e' is bound to resume a draft from show or tree mode.
This provides initial support for postponing in the emacs frontend;
resuming will follow in a later commit. On saving/postponing it uses
notmuch insert to put the message in the notmuch database
Current bindings are C-x C-s to save a draft, C-c C-p to postpone a
draft (save and exit compose buffer).
Previous drafts get tagged deleted on subsequent saves, or on the
message being sent.
Each draft gets its own message-id, and we use the namespace
draft-.... for draft message ids (so, at least for most people, drafts
are easily distinguisable).
We want to use "e" for editting postponed messages in show, and in
tree view, so remove the binding for the function which does
(In message pane) Activate BUTTON or button at point
This hook can be used to update the message based on the results of
address completion. For example using message-templ or gnus-alias to set
the From address based on the To address just completed.
The post-completion command is added to the notmuch-company backend to
ensure that the hook is also called company completion is started
without going through notmuch-address-expand-name. See the docstring of
`company-backends' for more information.
This makes replying to a message in tree view, use the decrypted state
from the message pane if it is open. Previously it just used the
global decryption state from notmuch-crypto-process-mime.
In particular if notmuch-crypto-process-mime is nil, and the user
views the messages (which doesn't decrypt), toggles decryption in the
message pane, and then replies, the reply will be decrypted.
This makes $ in the tree pane toggle decryption in the message
pane. Without this the user can only decrypt the message pane by
switching to it, or by setting decryption on globally by setting
notmuch-crypto-process-mime to t.
Add support for composing an email in the Notmuch Emacs UI using a
mailto: URL. The mailto: URL mode is mutually exclusive with
specifying other message modifying parameters and positional
arguments.
The notmuch-tag-flagged, notmuch-search-flagged-face and
notmuch-crypto-part-header faces defaulted to "blue", which is nearly
unreadable when a dark background is in use. This is addressed by using
"LightBlue1" for dark backgrounds.
As a side effect, these faces are now no-op definitions for grayscale or
mono displays.
If the given subcommand is not known to notmuch, try to execute
external notmuch-<subcommand> instead. This allows users to have their
own notmuch related tools be run via the notmuch command, not unlike
git does. Also notmuch-emacs-mua will be executable via 'notmuch
emacs-mua'.
By design, this does not allow notmuch's own subcommands to be
overriden using external commands.
The normal tag commands in search mode tag the all threads meeting the
region when called interactively. This makes them do the same when
called non-interactively. This is a change in the api.
Moved the 2 basename(1) executions to the test failure branch in
test_expect_equal_file ().
The output of basename(1) executions in function test_expect_equal_file ()
are only used when tests fails -- when all tests pass these 2 basename(1)
executions are no longer done at all.
This makes tag changes appear in the message pane as well as in the
tree window.
Note that the message pane is reloaded each time a message is viewed
so the tags shown in the message pane can still be different from
those in the tree window. Usually this will just be that the tag
change is still shown as a change (strikethough underline etc) in the
tree window, and are shown after the change in the message
pane. However, if something else updates the database then the tags
shown can be genuinely different.
The command notmuch-interesting-buffer has got out of date -- it
doesn't mention notmuch-tree, and it still refers to message-mode not
notmuch-message-mode. Update both of these.
This fixes the bug that notmuch-cycle-notmuch-buffers does not include
notmuch-tree or notmuch-message-mode buffers in its cycling.
This adds a file under devel listing all the keybindings sorted by key
in the main three modes (search, show and tree).
To reduce clutter it only lists the single key "unmodified"
keybindings: I think all our uses of prefixes and modifiers are
natural variants of the unmodified binding (eg M-n compared to n in
show mode)
This should make easier to see what keybindings are available when
adding new features.
