Add a custom value range processor to enable date and time searches of
the form date:since..until, where "since" and "until" are expressions
understood by the previously added date/time parser, to restrict the
results to messages within a particular time range (based on the Date:
header).
If "since" or "until" describes date/time at an accuracy of days or
less, the values are rounded according to the accuracy, towards past
for "since" and towards future for "until". For example,
date:november..yesterday would match from the beginning of November
until the end of yesterday. Expressions such as date:today..today
means since the beginning of today until the end of today.
Open-ended ranges are supported (since Xapian 1.2.1), i.e. you can
specify date:..until or date:since.. to not limit the start or end
date, respectively.
CAVEATS:
Xapian does not support spaces in range expressions. You can replace
the spaces with '_', or (in most cases) '-', or (in some cases) leave
the spaces out altogether.
Entering date:expr without ".." (for example date:yesterday) will not
work as you might expect. You can achieve the expected result by
duplicating the expr both sides of ".." (for example
date:yesterday..yesterday).
Open-ended ranges won't work with pre-1.2.1 Xapian, but they don't
produce an error either.
Signed-off-by: Jani Nikula <jani@nikula.org>
Test the date/time parser module directly, independent of notmuch,
using the parse-time test tool.
Credits to Michal Sojka <sojkam1@fel.cvut.cz> for writing most of the
tests.
Add a smoke testing tool to support testing the date/time parser
module directly and independent of the rest of notmuch.
Credits to Michal Sojka <sojkam1@fel.cvut.cz> for the stdin parsing
idea and consequent massive improvement in testability.
Add a date/time parser to notmuch, to be used for adding date range
query support for notmuch lib later on. Add the parser to a directory
of its own to make it independent of the rest of the notmuch code
base.
Signed-off-by: Jani Nikula <jani@nikula.org>
-Wswitch-enum is a bit awkward if a switch statement is intended to
handle just some of the named codes of an enumeration especially, and
leave the rest to the default label.
We already have -Wall, which enables -Wswitch by default, and per GCC
documentation, "The only difference between -Wswitch and this option
[-Wswitch-enum] is that this option gives a warning about an omitted
enumeration code even if there is a default label."
Drop -Wswitch-enum to not force listing all named codes of
enumerations in switch statements that have a default label.
This patch just renames the internal variables for the JSON parser now
it is no longer specific to search mode. It also fixes up the white
space after the previous patch. There should be no functional changes.
This patch splits out the incremental json parser into its own
function.
It moves the main logic of the parser to happen inside the parse
buffer rather than inside the results buffer, but makes sure all
results and all errors are displayed in the results buffer.
It also changes the local parser variables from being buffer
local to the results buffer to being buffer local to the parse buffer,
and sets them up automatically so the caller does not need to.
Finally to keep the diff small this patch does not fix the whitespace,
nor complete the code movement (these are done in subsequent patches)
but it should contain all the functional changes.
OpenBSD's build flags are identical to FreeBSD, except that libraries
need to be explicitly linked against libc. No code changes are
necessary.
From: Cody Cutler <ccutler@csail.mit.edu>
Currently, we only properly escape stashed id queries, but there are
other places where the Emacs UI constructs queries for boolean terms.
Since this escaping function is meant to be used in other places, it
avoids escaping strings that don't need escaping.
This disallows adding empty tags, since nothing but confusion follows
in their wake, and disallows adding tags that begin with "-" because
they are also confusing, the tag "-" is impossible to remove using the
CLI, and because the syntax for removing such tags conflicts with long
argument syntax.
This does not place any restrictions on what tags can be removed, as
that would make it difficult for people who have the misfortune of
already having malformed tags to remove these tags.
Newer patch email containing In-Reply-To: to an email sent some time ago
(i.e. to a "thread") was not visible in that "thread" in patch view when
another patch "thread" was submitted in between. This change collects
all messages in every (notmuch-created) thread together before printing
all these threads out in a patch view.
Thanks to Ethan Glasser-Camp for initial review and suggestions with
code examples.
In latest configuration quite a few long views were added to the
Notmuch Patches page. To ease navigating to the views a 'Views'
section was added to the beginning of page containing hyperlink
to every view.
Although messages are created in a particular order, it seems that
when they are created on a tmpfs, they do not always come back in the
same order, leading to the same files being ignored but being output
in a different order. This causes the test to fail because the outputs
being compared are the same.
Fix the failures by sorting the output of notmuch --debug and
comparing this to a hand-sorted version of its output.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
The use of --background option (instead of shell '&') ensures that
smtp-dummy is listening its server socket until execution of shell
script can continue, thus the client will always have socket where
to connect.
smtp-dummy outputs smtp_dummy_pid variable in shell assignment format;
eval'ing that output makes that variable available for the shell.
As the smtp-dummy instance is no longer child process of the script
the SIGKILL signal sent to it will ensure it is going away in case
the mail sender fails to connect to smtp-dummy.
When shell executes background process using '&' the scheduling of
that new process is arbitrary. It could be that smtp-dummy doesn't
get execution time to listen() it's server socket until some other
process attempts to connect() to it. The --background option in
smtp-dummy makes it to go background *after* it started to listen
its server socket.
When --background option is used, the line "smtp_dummy_pid='<pid>'"
is printed to stdout from where shell can eval it.
Demonstrates that *every* file/directory which matches one of the values
in 'new.ignore' will be ignored, independent of its depth/location in
the mail store.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Obviates the need to create a 'NOTMUCH_NEW' clone which runs
'notmuch new --debug'. This will be used in a later patch.
Doesn't cause any issues for other tests.
* test/emacs:
- New subtest "notmuch-show: collapse all messages in thread":
`notmuch-show-open-or-close-all' with prefix arg ("C-u M-RET")
collapses all messages in thread.
- New subtest "notmuch-show: uncollapse all messages in thread":
`notmuch-show-open-or-close-all' without prefix arg ("M-RET")
uncollapses all messages in thread.
* test/emacs:
- New subtest "notmuch-show: show message headers":
Setting `notmuch-message-headers-visible' to t causes all headers
defined in `notmuch-message-headers' to be shown.
- New subtest "notmuch-show: hide message headers":
Setting `notmuch-message-headers-visible' to nil causes all headers
defined in `notmuch-message-headers' to be hidden.
("Subject:" may be an exception; See the use of `headers-start' in
`notmuch-show-insert-msg')
- New subtest "notmuch-show: hide message headers (w/ notmuch-show-toggle-headers)":
Setting `notmuch-message-headers-visible' to t causes all headers
defined in `notmuch-message-headers' to be shown, but they can be
hidden for the current message by running `notmuch-show-toggle-headers'.
This requires changing the contents of the crypto tests, as one thread
that was marked read by the earlier tests in test/emacs is no longer
marked read.
This moves tests for:
- 09d19ac "test: emacs: toggle eliding of non-matching messages in
`notmuch-show'", which should have actually read: "test: emacs:
toggle processing of cryptographic MIME parts in `notmuch-show'".
See commit 19ec74c5.
- 5ea1dbe "test: emacs: toggle eliding of non-matching messages in
`notmuch-show'"
- 345faab "test: emacs: toggle thread content indentation in
`notmuch-show'"
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Since $TEST_DIRECTORY is an absolute path, any filenames generated
with it will be complete paths. Only use the basename to generate
suffixes for filenames.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Emacs 24's mm-shr HTML email renderer fails to load gnus-art before
referencing gnus-inhibit-images, resulting in a void-variable error
when notmuch attempts to render an HTML email with inline images.
This works around this bug by advising mm-shr to load gnus-art.
mm-shr is the only function outside of gnus-art itself that references
gnus-inhibit-images, so this workaround should be correct. If this
ever changes, hopefully they will have fixed this bug upstream first.
This fixes the "Rendering HTML mail with images" test for Emacs 24.
Most Emacs tests end with a call to (test-output), which saves the
buffer to a filed called OUTPUT. Previously, if the test code failed
with an exception before this call, the test framework would then
compare against the OUTPUT file from the last Emacs test, resulting in
confusing diffs.
This requires one tweak to an emacs test that made two calls to
test_emacs and expected an OUTPUT file from the first call. We simply
reverse the order of the test_emacs calls.
notmuch-hello (called also through notmuch-hello-update, bound to '='
by default) tries to find the widget under or following point before
refresh, and put the point back to the widget afterwards. The code has
grown quite complicated, and has at least the following issues:
1) All the individual section functions have to include code to
support point placement. If there is no such support, point is
dropped to the search box. Only saved searches and all tags
sections support point placement.
2) Point placement is based on widget-value. If there are two widgets
with the same widget-value (for example a saved search with the
same name as a tag) the point is moved to the earlier one, even if
point was on the later one.
3) When first entering notmuch-hello notmuch-hello-target is nil, and
point is dropped to the search box.
Moving the point to the search box is annoying because the user is
required to move the point before being able to enter key bindings.
Simplify the code by removing all point placement based on widgets, as
it does not work properly, and trying to fix that would unnecessarily
complicate the code.
Save current line and column before refresh, and restore them
afterwards. Sometimes, if notmuch-show-empty-saved-searches is nil,
and the refresh adds or removes saved searches from the list, this has
the appearance of moving the point relative to the nearest
widgets. This is a much smaller and less frequent problem than the
ones listed above.
GMIME_IS_MULTIPART and GMIME_IS_MESSAGE both handle NULL pointers
gracefully, but the G_OBJECT_TYPE used in the error handling block
dereferences it without checking it first.
Fix this by checking whether parent->part is valid.
Found using the clang static analyzer.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
Annotating functions that do not return with the noreturn attribute
(which is understood by both gcc and clang) prevents static analyzers
from generating false positives (internal_error is used to terminate
the process and is used extensively in error handling code paths).
Remove the return statement that was placed there to appease the
compiler. Functions annotated with noreturn are not supposed to return
any values.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
Fix the COERCE_STATUS macro to handle _internal_error being declared
as void function.
Note that the function _internal_error does not return. Evaluating to
NOTMUCH_STATUS_SUCCESS is done purely to appease the compiler.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
This attribute is understood by gcc since version 2.5. clang provides
support for testing for function attributes using __has_attribute. For
other compilers this macro evaluates to the empty string.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
__has_attribute is defined by clang and tests whether a given function
attribute is supported by clang.
Add a compatibility macro for other compilers.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
Since marking a message as read can now be a user customized set of
tag changes, make reversing this easier. Allow a prefix argument to
notmuch-show-mark-read to reverse the marking as read, similar to the
unarchiving in notmuch-show-archive-message.
While at it, update the relevant documentation to match that of other
automatic tagging (i.e. archive and reply).
