Most concrete verification steps are likely only taken on the e-mail
address in the first place, and e-mail addresses render more
intelligibly than arbitrary User IDs in the first place.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Amended-by: db, apply dme restructuring suggestions.
When the certificate that signs a message is known to be valid, GMime
is capable of reporting on the e-mail address embedded in the
certificate.
We pass this information along to the caller of "notmuch show", as
often only the e-mail address of the certificate has actually been
checked/verified.
Furthermore, signature verification should probably at some point
compare the e-mail address of the caller against the sender address of
the message itself. Having to parse what gmime thinks is a "userid"
to extract an e-mail address seems clunky and unnecessary if gmime
already thinks it knows what the e-mail address is.
See id:878s41ax6t.fsf@fifthhorseman.net for more motivation and discussion.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Since most memory allocation is (ultimately) in the talloc context
defined by a notmuch_database_t pointer, this gives a more complete
view of memory still allocated at program shutdown.
We also change the talloc report in notmuch.c to mode "a" to avoid
clobbering the newly reported log.
Although the function dates from 2015, the autoload is newer. In
particular [1] it is not found in Emacs 25.3.
[1]: id:874ke85tqx.fsf@cgc-instruments.com
This is a fix for the test failures reported by Dan Čermák [1].
It is more robust to check for the prerequisite inside the function
that uses it, rather than in every test file that calls the function.
[1]: id:87k0n4fqgm.fsf@tethera.net
notmuch-test will now call aggregate-results.sh with file list
that it compiles based on the test ran, and aggregate-results
will report failure is any of the test files are missing.
With this notmuch-test no longer has to exit in non-parallel
run if some test fail to write its report file -- so it works
as parallel tests in this sense.
Changed test_done() in test-lib.sh write report file in one write(2),
so there is (even) less chance it being partially written. Also,
now it writes 'total' last and aggregate-results.sh expects this
line to exist in all report files for reporting to be successful.
Added 'set -eu' to notmuch-test and modified code to work with
these settings. That makes it harder to get mistakes slipped
into committed code.
Gmane web interface is long gone, remove it. Make MARC the new
default. Update LKML to Lore, where it already redirects anyway. Also
add Notmuch web archive.
- declare-function notmuch-unthreaded lacked file name
- declare-function notmuch-search had differently named last arg
- note: check-declare-directory did not complain about that
- declare-function notmuch-search-show-thread without nil
- some functions declared to be in different file than those
existed ("notmuch" -> "notmuch-lib")
- some related function/declare lines were (/are now) wider than
80-columns; added line breaks (and proper indentation) there
After some discussion [1], I decided it is better to make notmuch users
who rely on this behaviour customize mail-user-agent. This is
consistent with the behaviour of other emacs mail packages.
[1]: id:87k0nuhfrk.fsf@toryanderson.com
Sourcing test-lib.sh will cd to TMP_DIRECTORY, so
relative path in $0 will not work in previous version
. $(dirname "$0")/test-lib-emacs.sh
Now individual test scripts -- e.g. ./test/T310-emacs.sh
will work.
See list discussion in thread starting with
id:87h7ip2baq.fsf@fifthhorseman.net for more details.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Amended-by: David Bremner (s/.emacs/Emacs configuration/)
Prior to 9ad19e4454 there was an unhandled Xapian exception when
reindexing after a large number of deletes. This test was used for
bisection, and will subsequently serve as a regression test.
At this point it is a bit tricky to measure the performance increase
from the new message deletion code, since the same commit (9ad19e4)
that improved the performance also seems to have fixed a bug with an
uncaught Xapian exception triggered by this test.
say_color() used to call (builtin) printf (and tput(1) to stdout)
several times, which caused attempts to write messages with color
to have partial content (e.g. escape sequences) often intermixed
with other tests when parallel tests were run.
Now, with all output collected, then written out using one
printf, all strings with color print out correctly
((at least short) write(2)'s appear to write out "atomically").
While at it, used only one tput(1) execution to determine whether
color output works, and made bold/colors/sgr0 to tput(1) their
values once per test.
Example reference to a command-line option using the option role
reference. This creates a hyperlink in html, and the usual boldface
style in man page. This could be used throughout the man pages.
Use the program and option directives to document the subcommand
options. This unifies a lot of option documentation throughout.
This also makes it possible to reference options with :option:`--foo`
(within .. program::) or :option:`subcommand --foo` (globally). This
is left for later work.
See https://www.sphinx-doc.org/en/master/usage/restructuredtext/domains.html#directive-program
Note: There is a lot of indentation change, but intentionally there is
no reflow. Using 'git diff -w' or 'git show -w' to ignore white space
changes makes this a very easy change to review.
Make man1/notmuch.rst the single point of truth for describing notmuch
environment variables. Use the envvar directive for that, and
reference them with the envvar role.
Drive-by cleanup configuration file and hook directory search order
documentation.
Add internal hyperlink targets for man pages and cross-reference them
using the any role reference. There are a number of alternatives to
accomplish this, but this seems like the combination that retains the
man page section number and the same boldface style in the man pages.
As a bonus, we get sanity checking on the links; for example
notmuch-search-terms.rst had a reference to notmuch-properties(1)
i.e. the wrong section.
The obvious semantic follow-up change would be to only have meaningful
"see also" references instead of having them all everywhere.
notmuch_passwd_sanitize() in test-lib.sh is too generic, it cannot
work in many cases...
The more specific version _libconfig_sanitize() replaces it in
T590-libconfig.sh and the code that uses it is modified to output
the keys (ascending numbers printed in hex) so the sanitizer knows
what to sanitize in which lines...
"@" + fqdn -> "@FQDN" replacement is used as fqdn could
-- in theory -- be substring of 'USERNAME'.
'user -> 'USER_FULL_NAME replacement to work in cases where user
is empty -- as only first ' is replaced that works as expected.
In addition to ".(none)" now also ".localdomain" is filtered from
USERNAME@FQDN.
/dev/fd/{n} is not defined in posix, but it is portable enough
(if it weren't it is easy to fix -- now code looks clearer).
Using manpage role references generates helpful links in html
documentation, while retaining the same boldface style in the man
pages.
The external man page site is configurable. The Debian manpage site
seems like a good fit for Notmuch.
The ruby MakeMakefile generates a makefile that is suboptimal, which has
CFLAGS like this:
CFLAGS = $(CCDLFLAGS) -march=x86-64 -mtune=generic \
-O2 -pipe -fno-plt -fPIC $(ARCH_FLAG)
This works as long as the user doesn't modify the Makefile.
Certain flags (namely -fPIC) need to be present regardless of what
CFLAGS are specified.
The Makefile should have done this instead:
CFLAGS = -march=x86-64 -mtune=generic -O2
override CFLAGS += $(CCDLFLAGS) -pipe -fno-plt -fPIC $(ARCH_FLAG)
Unfortunately they didn't, so we need to workaround their lack of
foresight.
We can simply add the necessary flags in the parent Makefile so everyone
is happy.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
This prevents the message document getting multiple thread-id terms
when there are multiple files with the same message-id.
This change shifts some thread ids, requiring adjustments to other tests.
According to my bijection, this bug has been present since commit
411675a6ce in 2017. It is not completely clear what harm it causes in
regulary use, but it (at least) makes notmuch crash when compiled with
-DDEBUG_DATABASE_SANITY.
"xargs tar cf backup.tar < $manifest" recreates the tar file with each
"batch" execed by xargs. In general this results in only a fraction of
the desired files being backed up.
Variable 'notmuch-saved-searches-sort-function' does not exist;
'notmuch-saved-search-sort-function' is the correct name.
Signed-off-by: Luis Henriques <henrix@camandro.org>
Sphinx 4.0 changed the default value of man_make_section_directory
from False to True. We create the section directories and move the
files manually, so fix the immediate man build failure by disabling
the feature.
The Sphinx documentation on this [1] is confusing, and has the change
backwards. Git history says the default changed from False to True.
[1] https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-man_make_section_directory
"xargs tar cf backup.tar < $manifest" recreates the tar file with each
"batch" execed by xargs. In general this results in only a fraction of
the desired files being backed up.
Variable 'notmuch-saved-searches-sort-function' does not exist;
'notmuch-saved-search-sort-function' is the correct name.
Signed-off-by: Luis Henriques <henrix@camandro.org>
Sphinx 4.0 changed the default value of man_make_section_directory
from False to True. We create the section directories and move the
files manually, so fix the immediate man build failure by disabling
the feature.
The Sphinx documentation on this [1] is confusing, and has the change
backwards. Git history says the default changed from False to True.
[1] https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-man_make_section_directory
