We had exposed this to the internal implementation for a short time,
(only while we had the silly code fetching In-Reply-To values from
message files instead of from the database). Make this private again
as it should be.
Maybe ths lack of this documentation is why I forgot we were actually
storing this and wrote the ugly code to fetch In-Reply-To from message
files rather than from the database.
Which is more consistent with the XREFERENCE prefix used in the terms
in the database. Also remove some stale documentation describing the
removal of resolved references from the database (we no longer do
this).
Calling continue here worked only because we set a flag before the
continue, and, check the flag at the beginning of the loop, and *then*
break. It's much more clear to just break in the first place.
The message file header parsing code parses only enough of the file to
find the desired header fields, then it leaves the file open until the
next header parsing call or when the message is no longer in use. If a
large number of messages end up being active, this will quickly run
out of file descriptors.
Here, we add support to explicitly close the message file within a
message, (_notmuch_message_close) and call that from thread
construction code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Edited-by: Carl Worth <cworth@cworth.org>:
Many portions of Keith's original patch have since been solved other
ways, (such as the code that changed the handling of the In-Reply-To
header). So the final version is clean enough that I think even Keith
would be happy to have his name on it.
This really should be impossible---if there are no messages, then what
was the thread object created from? During recent debugging, it was
useful to have this error detected and reported.
In our scheme it's illegal for any message to refer to itself, (nor
would it be useful for anything anyway). Cut these self-references off
at the source, before they trip up any internal errors.
This case was happening when a message had its own message ID in its
In-Reply-To header. The thread-resolution code would find the
partially constructed message, (with no thread ID yet), get garbage
from this function, and then march right along with that garbage.
With this commit, a self-cyclic message like this will now trigger an
internal error rather than marching along silienty. (And a subsequent
commit will remove the call to this function in this case.)
This function has only one caller, and that one caller was passing the
same value for both talloc_owner and the notmuch database. Dropping
the redundant argument simplifies the documentation of this function
considerably.
This reduces our reliance on open message_file objects, (so is a step
toward fixing the "too many open files" bug), but more importantly, it
means we don't load a self-referencing in-reply-to header, (since we
weed those out before adding any replyto terms to the database).
We'll be a much more polite package this way. And the user can change
the prefix by editing Makefile.config. Still to be done is to make
configure write out Makefile.config and to add a --prefix option to
configure.
I was confusing myself with some rules installing to directories and
some installing to files. We do still install to a filename when
simultaneously renaming, (such as notmuch-completion.bash to notmuch).
When this function was originally written, the 'message' object was
always destroyed locally, so I thought it would be good to use a NULL
talloc context to make it more obvious if there was any leak.
Since then, however, this function has been changed to optionally
return the added message, and in that case we *don't* free the message
locally, so let's let the database be the talloc context.
The documentation for 'next-line' suggests that 'forward-line' is a
better choice for non-interactive usage. That appears to be the case
here; using next-line caused emacs to spin forever for me.
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the default separator used by mailman, so there's a lot of
clutter in thread displays without this. Also, we not provide a nice
variable to the user (notmuch-show-signature-regexp) for configuring
this.
I think there's a GMime bug that we're getting parts decoded without a
final newline (the encoded parts seem to have them just fine). We can
workaround the bug easily enough by finding a part-closing delimiter
that is not at the beginning of a line, and if so, just insert a
newline.
Without this, the one-line-summary of the next message would continue
on the same line as the last line of the previous message, (and this
would often happen for mailing-list messages where mailman would add
an extra part for its signature block).
notmuch restore used to only add tags; now that it clears existing
tags, it needs to operate on messages even if the new tag list is empty.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Carl Worth <cworth@cworth.org>:
I fixed up the indentation here, (someday we might switch to 8-space
indents, but we haven't yet).
This makes it much easier to actually read the subject lines.
The user can set notmuch-search-authors-width to control the width of
the column.
Two possible ideas for improving this support further:
1. Make the excess authors invisible instead of removing them from
the buffer, (which means that isearch could still find them).
2. Have the user variable control a percentage of the window width
rather than being a fixed number of columns.
Now that we're actually adding text to the buffer for the indentation,
our old aproach of using positions to record regions to manipulate is
now longer correct. Fortunately, it's easy to switch from positions to
markers which are robust, (just call point-marker instead of point and
all relevant functions accept markers as well as points).
I also finally fixed the bug where the text "[6 line signature]" we
display was causing the one-line-summary of the next message to be on
its same line rather than at the beginning of the next line where it
belongs.
We now properly analyze the in-reply-to headers to create a proper
tree representing the actual thread and present the messages in this
correct thread order. Also, there's a new "depth:" value added to the
"message{" header so that clients can format the thread as desired,
(such as by indenting replies).
It's funny that I picked up the habit of always including a space
before a left parenthesis from Keith, and now he's in the habit of
contributing code without it.
The existing notmuch_message_get_header is *almost* good enough for
this, except that we also need to remove the '<' and '>'
delimiters. We'll probably want to implement this function with
database storage in the future rather than loading the email message.
This prototype has been sitting around for a while with no function
implementing it. I wonder if there's a compiler warning I could turn
on to catch these things.
Previously, the notmuch_messages_t object was a linked list built on
top of a linked-list node with the odd name of notmuch_message_list_t.
Now, we've got much more sane naming with notmuch_message_list_t being
a list built on a linked-list node named notmuch_message_node_t. And
now the public notmuch_messages_t object is a separate iterator based
on notmuch_message_node_t. This means the interfaces for the new
notmuch_message_list_t object are now made available to the library
internals.
The new object is simply a linked-list of notmuch_message_t objects,
(unlike the old object which contained a couple of Xapian iterators).
This works now by the query code immediately iterator over all results
and creating notmuch_message_t objects for them, (rather than waiting
to create the objects until the notmuch_messages_get call as we did
earlier).
The point of this change is to allow other instances of lists of
messages, (such as in notmuch_thread_t), that are not directly related
to Xapian search results.
Previously, an excess call would have caused a crash. Now it simply
does nothing. Also, make notmuch_tags_get use a similar, consistent
early return for a NULL iterator.
Currently just supports viewing all MIME parts in the message. There's
not yet support for selecting and viewing individual parts, but that
should be easy to add from here, (now that we've found
mm-display-parts to do all the heavy lifting).
There are still open questions about how to correctly compute the
intended list of recipients. We'll probably need separate "reply to
sender" and "reply to all" commands at some point (unfortunately).
By installing a signal handler for SIGINT we can ensure that no work
that is already complete will be lost if the user interrupts a
"notmuch new" run with Control-C.
We were properly sorting the threads based only on matched messages,
but we were displaying the date based on the total messages in the
thread, which led to inconsistent and very confusing results.
This gives us two different default search orders: The inbox view that
comes up from "M-x notmuch" is sorted in chronological order (oldest
threads first). A new global search "M-x notmuch-search" will instead
be in reverse chronological order (newest threads first).
Any filtered searches retain the sort order of the search being
filtered.
There's not yet any interface for changing the sort order of a search
after it is constructed.
Note that the difference between thread results in date order and
thread results in reverse-date order is not simply a matter of
reversing the final results. When sorting in date order, the threads
are sorted by the oldest message in the thread. When sorting in
reverse-date order, the threads are sorted by the newest message in
the thread.
This difference means that we might want an explicit option in the
interface to reverse the order, (even though the default will be to
display the inbox in date order and global searches in reverse-date
order).
Otherwise, things in the lib sub-directory weren't getting recompiled
even when lib/notmuch.h was changed.
The original rule we were using came from the GNU Makefile manual, but
only handled files in the current directory, not file in
sub-directories as we use here with our non-recursive Makefile.
So the .deps files being created were being put in the right place,
(such as .deps/lib/database.d), but the compiler was generating a
dependency for "database.o" rather than "lib/database.o" like we
want. We were already trying to do a sed job on that name to add a
dependency for the .d file as well. But the sed job was failing since
the expected pattern wasn't there, (the directory name was missing).
So the fix is simply to use basename to construct the search pattern,
and then use the name with the directory in the replacement (rather
than the back-reference).
Note that we don't print the number of *unread* messages, but instead
the number of messages that matched the search terms. This is in
keeping with our philosophy that the inbox is nothing more than a
search view. If we search for messages with an inbox tag, then that's
what we'll get a count of. (And if somebody does want to see unread
counts, then they can search for the "unread" tag.)
Getting the number of matched messages is really nice when doing
historical searches. For example in a search like:
notmuch search tag:sent
(where the "sent" tag has been applied to all messages originating
from the user's email address)---here it's really nice to be able to
see a thread where the user just mentioned one point [1/13] vs. really
getting involved in the discussion [10/29].
