Unify the subtests by requiring test_begin_subtest before
test_expect_code. (Similar change for test_expect_success has already
been done.)
This increases clarity in the test scripts by having a separate line
for the start of the subtest with the heading, and makes it possible
to simplify the test infrastructure by making all subtests similar.
Unify the subtests by requiring test_begin_subtest before
test_expect_success. (Similar change for test_expect_code will
follow.)
This increases clarity in the test scripts by having a separate line
for the start of the subtest with the heading, and makes it possible
to simplify the test infrastructure by making all subtests similar.
The only place where we use the implicit prereq check is T000-basic.sh
where we check that it works. It's an added complication that we don't
use. Remove it.
The test_have_prereq function can still be used for the same effect in
subtests that use test_begin_subtest. For now, this will make it
impossible to have prereqs in one-line subtests that don't require
test_begin_subtest. This will be fixed in follow-up work.
Known broken tests are, well, known broken. Do not print the result
diff for them unless V=1 is specified. Now that the test description
is printed also when known broken tests fail, the user can also skip
to running the individual failing tests.
We already use this directory for dtach sockets, so it makes sense to
put gnupg sockets there as well. There doesn't seem to be a clean way
to put a fully functional socket in a different location than
GNUPGHOME.
This reverts commit e7b88e8b0a.
It turns out that this does not work well in environments without a
running systemd (or some other provider of /run/user)
Instead of just having the first filename for the message, list all
duplicate filenames of the message as a list in the formatted
outputs. This bumps the format version to 3.
$NOTMUCH_PYTHON is sourced from sh.config, configured by
./configure and stated to be used as:
"Name of python command to use in configure and the test suite."
This enables the shortened socket pathes in /run or equivalent. The
explicit call to gpgconf is needed for nonstandard GNUPGHOME settings.
(amended according to id:m2fujatr4k.fsf@guru.guru-group.fi)
GnuPG 2.1.16 is now injecting the full issuer fingerprint in its
signatures, which makes them about 32 octets larger when
ascii-armored.
This change in size means that the size of the MIME parts will vary
depending on the version of gpg that the user has installed. at any
rate, the signature part should be non-zero (this is true for
basically any MIME part), so we just test for that instead of an exact
size.
Moved the 2 basename(1) executions to the test failure branch in
test_expect_equal_file ().
The output of basename(1) executions in function test_expect_equal_file ()
are only used when tests fails -- when all tests pass these 2 basename(1)
executions are no longer done at all.
In case of the test script is to be relaunced under valgrind, or --tee
is requested, use the $BASH shell variable to locate the command
interpreter. The $SHELL variable is re-set by non-interactive shells
so in case the shell uses some other shell (e.g. zsh) for interactive
use these bash scripts continue to work.
We largely use the corpus under test/corpus for
testing. Unfortunately, many of our tests have grown to depend on
having exactly this set of messages, making it hard to add new message
files for testing specific cases.
We do use a lot of add_message from within the tests, but it's not
possible to use that for adding broken messages, and adding several
messages at once can get unwieldy.
Move the basic corpus under tests/corpora/default, and make it
possible to add new, independent corpora along its side. This means
tons of renames with a few tweaks to add_email_corpus function in
test-lib.sh to let tests specify which corpus to use.
The trick of having a common header file doesn't work to share between
test scripts, so make an include file in the test directory.
The use of #include <notmuch-test.h> looks slightly pretentious, but
the include file is not actually in the current (temporary) directory.
Place PYTHONPATH to the environment when python is executed in a way
that current shell environment is not affected. This also allows adding
the old value of PYTHONPATH to the end of the new value (otherwise it
would have been appended again and again when test_python is called).
At the same time, use -B option to avoid writing .pyc files to
bindings/python/* (which are not cleared out by distclean).
Drop the (unused) prefix code which preserved the original stdout of the
python program and opened sys.stdout to OUTPUT. In place of that there
is now note how (debug) information can be printed to original stdout.
Previously LD_LIBRARY_PATH was exported (and environment changed)
in the middle of test case execution, when a function setting it
was called.
Previously the old contents of LD_LIBRARY_PATH was lost (if any)
when it was re-set and exported. In some systems the old contents of
LD_LIBRARY_PATH was needed to e.g. locate suitable gmime library.
Added die() function to test-lib.sh with the following first use of it:
If notmuch new fails during email corpus addition the database is
most probably inexistent or broken and the added corpus would be
unusable while running single tests, giving misleading failures
("only" full 'make test' cleans out old corpus).
Many of the external links found in the notmuch source can be resolved
using https instead of http. This changeset addresses as many as i
could find, without touching the e-mail corpus or expected outputs
found in tests.
Most of the infrastructure here is general, only the validation/dispatch
is hardcoded to a particular prefix.
A notable change in behaviour is that notmuch-config now opens the
database e.g. on every call to list, which fails with an error message
if the database doesn't exit yet.
Files in test directories had only copyright of a single individual,
of which code was adapted here as a base of the test system.
Since then many Notmuch Developers have contributed to the test
system, which is now acknowledged with a constant string in some
of the test files.
The README file in test directory instructed new files contain a
copyright notice, but that has never been done (and it is also not
needed). To simplify things a bit (and lessen confusion) this
instruction is now removed.
As a side enchangement, all of the 3 entries in the whole source
tree cd'ing to `dirname` of "$0" now uses syntax cd "$(dirname "$0")".
This makes these particular lines work when current working directory
is e.g. /c/Program Files/notmuch/test/.
(Probably it would fail elsewhere, though.)
This is mainly for the test suite. We already expect the tests to be
run in the same environment as configure was run, at least to get the
name of the python interpreter. So we are not really imposing a new
restriction.
The test is pretty much cut and paste from the PGP/MIME version, with
obvious updates taken from notmuch output. This also requires setting
up gpgsm infrastucture.
Test the ability of notmuch-mua-mail to send S/MIME signed (and
encrypted) messages; this really relies on existing functionality in
message-mode.
The generated keys and messages will later be useful for testing the
notmuch CLI.
ALTERNATE_EDITOR causes emacsclient to run an alternate editor if the
emacs server is not ready. This can collide with intended
functionality in test-lib.sh.
If the ALTERNATE_EDITOR is set but empty, emacsclient runs emacs
daemon and tries to connect to it. When this happens the emacs run by
test-lib.sh fails to start the server and the subsequent attempts to
use the server fail because the daemon started by emacsclient does not
know about notmuch-test-progn. This leads to test suite failure due to
time out on any emacs test.
This exposes the committed database revision to library users along
with a UUID that can be used to detect when revision numbers are no
longer comparable (e.g., because the database has been replaced).
The files (test) scripts source (with builtin command `.`) provides
information which the scripts depend, and without the `source` to
succeed allowing script to continue may lead to dangerous situations
(e.g. rm -rf "${undefined_variable}"/*).
At the end of all source (.) lines construct ' || exit 1' was added;
In our case the script script will exit if it cannot find (or read) the
file to be sourced. Additionally script would also exits if the last
command of the sourced file exited nonzero.
Previously we globally modified these variables, which tended to cause
problems for people using message-mode, but not notmuch-mua-mail, to
send mail.
User visible changes:
- Calling notmuch-fcc-header-setup is no longer optional. OTOH, it
seems to do the right thing if notmuch-fcc-dirs is set to nil.
- The Fcc header is visible during message composition
- The name in the mode line is changed, and no longer matches exactly
the menu label.
- Previously notmuch-mua-send-and-exit was never called. Either we
misunderstood define-mail-user-agent, or it had a bug. So there was
no difference if the user called message-send-and-exit directly. Now
there will be.
- User bindings to C-c C-c and C-c C-s in message-mode-map are
overridden. The user can override them in notmuch-message-mode-map,
but then they're on their own for Fcc handling.
The configure script chooses "python" if both python and python{2,3}
exist exists, so this could change the version of python used to run
the test suite.
The checking for ${NOTMUCH_PYTHON} in the test suite is arguably
over-engineering, since the configure step will fail if it can't find
it.
This is to limit the copy-pasta involved in running C tests. I decided
to keep things simple and not try to provide an actual C skeleton.
The setting of LD_LIBRARY_PATH is to force using the built libnotmuch
rather than any potential system one.
When something in tests fails one possibility to test is to run
the test script as `bash -x TXXX-testname.sh`. As stderr (fd 2) was
redirected to separate file during test execution also this set -x
(xtrace) output would also go there.
test-lib.sh saves the stderr to fd 7 from where it can be restored,
and bash has BASH_XTRACEFD variable, which is now given the same value
7, making bash to output all xtrade information (consistently) there.
This lib file used to save fd's 1 & 2 to 6 & 7 (respectively) in
test_begin_subtest(), but as those needs to be set *before* XTRACEFD
variable is set those are now saved at the beginning of the lib (once).
This is safe and simple thing to do.
To make xtrace output more verbose PS4 variable was set to contain the
source file, line number and if execution is in function, that function
name. Setting this variable has no effect when not xtracing.
As it is known that fd 6 is redirected stdout, printing status can now
use that fd, instead of saving stdout to fd 5 and use it.
At the moment, the test-lib fills in any missing headers. This makes
it impossible to test our handling of empty subjects. This will
allow us to use a special dummy subject -- `@FORCE_EMPTY` -- to force
the subject to remain empty.
