It was getting quite annoying to see this big block of text on every
little build, (but I didn't want to get rid of it for any new users).
This seems to strike the right balance.
The idea here is to allow a new user of notmuch to be able to run
notmuch immediately after compiling, (without having to install
the shared library first). This also ensures that the test suite
tests the locally compiled library, and not whatever installled
version of the library the dynamic linker happens to find.
The default "make" would be quite quiet, but still conveniently print
the CFLAGS. The explicit "make V=0" was intended to be identical, (only
not printing the message about V=1 but was broken in that it left the
CFLAGS off). Fix this.
We had a fairly ugly violation of modularity with the top-level
Makefile.local isntalling everything, (even when the build commands
for the library were down in lib/Makefile.local).
There's not any special configure logic for determining these variable
values, but if we did add some in the future, then these will now be
in the right place for that.
Additionally, this now makes Makefile.local the single place for the
user to look for manually tweaking a variable assignment, (say, for a
compiler that can't accept a particular warning argument).
With this change, there should rarely be any need for a user to poke
into any Makefile.local file.
Before it was impossible to know whether any particular setting or
rule definition was in Makefile or Makefile.local. So we strip the
Makefile down to little more than the list of sub-directories and
the logic to include all of the sub-directories' Makefile.local
fragments.
Then, all of the real work can happen inside of Makefile.local.
We wamt a simple "make" to call the 'all' target and then print a
message when done, but we don't want "make install" which depends on
that same 'all' target to print the message.
We previously did this with a separate 'all-without-message' target,
which was inelegant because it caused all users of the target to
carefully depend on 'all-without-message' rather than 'all'.
Instead, we now use a single 'all' target but with a Makefile
conditional that examines the MAKECMDGOALS variable to determine
whether to print the message.
Add emacs/Makefile.local and emacs/Makefile. Move emacs targets into
emacs/Makefile.local, but leave the byte compilation rule in the top
level Makefile.
In the case of notmuch-show, "--format=json" also implies
"--entire-thread" as the thread structure is implicit in the emitted
document tree.
As a coincidence to the implementation, multipart message ID numbers are
now incremented with each part printed. This changes the previous
semantics, which were unclear and not necessary related to the actual
ordering of the message parts.
Add an install target that uses desktop-file-install to install the
desktop file in the appropriate location. The location of the install
can be modified by changing the desktop_dir variable.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
According to the Debian zsh maintainer Clint Adams, this is the first
time that a package installs its own completer into zsh. Part of the
reason this is not usually done is because zsh does not provide a stable
API.
We agreed to try it, given that notmuch is expected to change quite
a bit initially. If there are problems or the completer goes stable,
we'll move it into the upstream zsh repository.
Signed-off-by: martin f. krafft <madduck@debian.org>
The only reason I ever call "make V=1" myself, (other than when
debugging the compiler command-line for some reason), is to ensure
whether my CFLAGS, (like "-g -O0" or "-O2"), are actually making it to
the command-line.
But these are hard to find in the V=1 output, and really, we should
just print these even in the quiet case. So do that.
It was problematic to have this in "make install" since it would
unconditionally try to install to /etc, (even if a non-privileged user
was attempting an install to a prefix in the user's home directory,
for example).
This is a new notmuch command that can be used to search for all tags
found in the database. The resulting list is alphabetically sorted.
The primary use-case for this new command is to provide the tag
completion feature in Emacs (and other interfaces).
Signed-off-by: Jan Janak <jan@ryngle.com>
Getting the count of matching threads or messages is a fairly
expensive operation. Xapian provides a very efficient mechanism that
returns an approximate value, so use that for this new command.
This returns the number of matching messages, not threads, as that is
cheap to compute.
Signed-off-by: Keith Packard <keithp@keithp.com>
I felt sorry for Carl trying to step through an exception from xapian
and suffering from the SIGALARMs..
We can detect if the user launched notmuch under a debugger by either
checking our cmdline for the presence of the gdb string or querying if
valgrind is controlling our process. For the latter we need to add a
compile time check for the valgrind development library, and so add the
initial support to build Makefile.config from configure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Carl Worth <cworth@cworth.org>
[ickle: And do not install the timer when under the debugger]
The rule here was written to assume that if the GZIP environment
variable was set that it would be the gzip binary to execute,
(similar to the CC and CXX variables). But GZIP is actually used
to pass arguments to gzip, so we have to use a different name.
Use the facilities of GNU make to create a magic function that will
on the first invocation print a description of how to enable verbose
compile lines and then print the quiet rule.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Carl Worth <cworth@cworth.org>
Cc: Mikhail Gusarov <dottedmag@dottedmag.net>
[ickle: Rebased, and duplicate command string eliminated.]
[ickle: Fixed verbose bug pointed out by Mikhail]
1) Add a separate targets to build and install emacs mode.
2) Don't hardcode the installation directory, instead use emacs'
pkg-config module.
3) Install a byte compiled version of the emacs mode.
4) Install the emacs mode in emacs' site-lisp directory. Put
"(require 'notmuch)" in your .emacs to load it automatically.
5) Ignore byte-compiled emacs files.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
Reviewed-by: Ingmar Vanhassel <ingmar@exherbo.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Previously, Ubuntu 9.10, gcc 4.4.1 was getting:
/usr/bin/ld: lib/notmuch.a(database.o): in function global
constructors keyed to BOOLEAN_PREFIX_INTERNAL:database.cc(.text+0x3a):
error: undefined reference to 'std::ios_base::Init::Init()'
Do not use -C cmdline option of install, older versions, commonly found in
distributions like Debian, do not seem to support it. Running make install
on such systems (tested on Debian Lenny) fails.
Signed-off-by: Jan Janak <jan@ryngle.com>
We'll be a much more polite package this way. And the user can change
the prefix by editing Makefile.config. Still to be done is to make
configure write out Makefile.config and to add a --prefix option to
configure.
I was confusing myself with some rules installing to directories and
some installing to files. We do still install to a filename when
simultaneously renaming, (such as notmuch-completion.bash to notmuch).
This will allow for things like the database path to be specified
without any cheesy NOTMUCH_BASE environment variable. It also will
allow "notmuch reply" to recognize the user's email address when
constructing a reply in order to do the right thing, (that is, to use
the user's address to which mail was sent as From:, and not to reply
to the user's own addresses).
With this change, the "notmuch setup" command is now strictly for
changing the configuration of notmuch. It no longer creates the
database, but instead instructs the user to call "notmuch new" to do
that.
Reviewed-by: Carl Worth <cworth@cworth.org>
Keith wrote all the code here against notmuch before notmuch.c was
split up into multiple files. So I've pushed the code around in
various ways to match the new code structure, but have generally tried
to avoid making any changes to the behavior of the code.
I did fix one bug---a missing call to g_mime_stream_file_set_owner in
show_part which would cause "notmuch show" to go off into the weeds
when trying to show multiple messages, (since the first stream would
fclose stdout).
Now that the client sources are alone here in their own directory,
(with all the library sources down inside the lib directory), we can
break the client up into multiple files without mixing the files up.
The hope is that these smaller files will be easier to manage and
maintain.
We were previously using separate CFLAGS and NOTMUCH_CFLAGS variables
in an attempt to allow the user to specify CFLAGS on the command-line.
However, that's just a lot of extra noise in the Makefile when we can
instead let the user specify what is desired for CFLAGS and then use
an override to append the things we require. So our Makefile is much
neater now.
The idea here is that every Makefile at each lower level will be an
identical, tiny file that simply defers to a top-level make.
Meanwhile, the Makefile.local file at each level is a Makefile snippet
to be included at the top-level into a large, flat Makefile. As such,
it needs to define its rules with the entire relative directory to
each file, (typically in $(dir)). The local files can also append to
variables such as SRCS and CLEAN for files to be analyzed for
dependencies and to be cleaned.
