internet_address_list_to_string returns an allocated string, which
needs to be freed with g_free. g_free can handle a NULL argument, so
we follow the usage elsewhere of calling it unconditionally.
The third leak we leave as it would require restructuring of
add_recipients_from_message, and is fixed by later gmime-3.0 porting.
Interleaving printfs with writes to the gmime stream worked when the
gmime stream was backed by the FILE *stdout, but that is no longer the
case. Create one stream and pass it into the two functions where
needed, as well well as replacing printfs with g_mime_stream_printf.
This function was deprecated in notmuch 0.21. We re-use the name for
a status returning version, and deprecate the _st name. One or two
remaining uses of the (removed) non-status returning version fixed at
the same time
Use gmime message instead of notmuch message in Reply-To: redundancy
detection. This allows us to easily iterate over all recipient email
addresses accurately, instead of just scanning for strings in the
relevant message headers. This improves the accuracy of the detection
in many ways.
This also makes the notmuch message parameter to get_sender()
unused. This will be cleaned up in a follow-up patch to not make too
many changes here at once.
Avoid parsing Reply-To: header into internet address list twice. Move
the parsing outside of reply_to_header_is_redundant(), and pass the
parsed internet address list in as parameter. This also avoids leaking
the memory of one copy of the internet address list.
Pass in GMimeMessage to simplify To/Cc/Bcc headers. We'll eventually
remove the notmuch message passing altogether, but keep both for now
to not make too big changes at once.
Getting the headers from GMimeMessage using GMime functions fixes the
error on duplicate Cc headers reported by Daniel Kahn Gillmor
<dkg@fifthhorseman.net> in id:87d1ngv95p.fsf@alice.fifthhorseman.net.
Get rid of an intermediate function.
The small annoyance is the ownership differences in the address lists.
Now that we've made the various reply formats quite similar to each
other, there's no point in keeping the abstractions. They are now
close enough to be put in one function.
For now, a mime node will be uselessly created for the headers-only
case, but this is insignificant, and may change in the future.
Just use strdup when original references is not available, instead of
trying to cram everything into a monster asprintf. There should be no
functional changes.
Again, in preparation for later unification, reorganize
create_reply_message() to be more similar to the headers-only format
reply code in notmuch_reply_format_headers_only(). Due to "pretty"
header ordering, there should be no change in output. There should be
no functional changes.
Prepare for further future unification by making the code similar. The
only functional change is that errors in mime_node_open() also break
execution in default reply format.
There's quite a bit of duplication, and some consequent deviation,
between the various notmuch reply format code paths. Perform the query
and message iteration in common code, and make the format specific
functions operate on single messages.
There should be no functional changes.
Many of the external links found in the notmuch source can be resolved
using https instead of http. This changeset addresses as many as i
could find, without touching the e-mail corpus or expected outputs
found in tests.
In case of notmuch reply and notmuch show --part=N it is required that
search terms match to one message. If match count was != 1, error
message "Error: search term did not match precisely one message"
was too vague to explain what happened.
By appending (matched <num> messages) to the error message it
makes the problem more understandable (e.g when <num> is '0'
user reckons the query had a typo in it).
Current documentation and comments in the code do not correspond to
the actual code and tests in the test suite ("Un-munging Reply-To" in
T230-reply-to-sender.sh). Fix it.
Per RFC 2183, the values for Content-Disposition values are not
case-sensitive. While at it, use the gmime function for getting at the
disposition string instead of referencing the field directly.
This fixes attachment display and quoting in notmuch show and reply,
respectively.
I think it would be no real problem to cut and paste the gdb based
error message test from count to the other clients modified here, but
I'm not currently convinced it's worth the trouble since the code path
being tested is almost the the same, and the tests are relatively
heavyweight.
The function notmuch_exit_if_unmatched_db_uuid is split from
notmuch_process_shared_options because it needs an open notmuch
database.
There are two exceptional cases in uuid handling.
1) notmuch config and notmuch setup don't currently open the database,
so it doesn't make sense to check the UUID.
2) notmuch compact opens the database inside the library, so we either
need to open the database just to check uuid, or change the API.
Unfortunately it seems trickier to support --config globally
The non-trivial changes are in notmuch.c; most of the other changes
consists of blindly inserting two lines into every subcommand.
Previously we set up a way for the top level notmuch command to choose
which gpg binary was invoked by libgmime. In this commit we add the
(mostly boilerplate) code to allow the notmuch-config command to read
and write this path, and use it in the appropriate struct.
Update tests for new default variable
GMIME takes a path to gpg, but we hardcode that path. In this commit
we set up argument passing and option storage to allow this path to
specified in the top level notmuch command.
Apart from the status codes for format mismatches, the non-zero exit
status codes have been arbitrary. Make the cli consistently return
either EXIT_SUCCESS or EXIT_FAILURE.
For my client, the largest bottleneck for displaying large threads is
exporting each html part individually since by default notmuch will not
show the json parts. For large threads there can be quite a few parts and
each must be exported and decoded one by one. Also, I then have to deal
with all the crazy charsets which I can do through a library but is a
pain.
Therefore, this patch adds an --include-html option that causes the
text/html parts to be included as part of the output of show.
diff man/man1/notmuch-show.1
Previously, reply's default text format used an odd mix of RFC 2045
MIME encoding for the reply template's body and some made-up RFC
2822-like UTF-8 format for the headers. The intent was to present the
headers to the user in a nice, un-encoded format, but this assumed
that whatever ultimately sent the email would RFC 2047-encode the
headers, while at the same time the body was already RFC 2045 encoded,
so it assumed that whatever sent the email would *not* re-encode the
body.
This can be fixed by either producing a fully decoded UTF-8 reply
template, or a fully encoded MIME-compliant RFC 2822 message. This
patch does the latter because it is
a) Well-defined by RFC 2822 and MIME (while any UTF-8 format would be
ad hoc).
b) Ready to be piped to sendmail. The point of the text format is to
be minimal, so a user should be able to pop up the template in
whatever editor they want, edit it, and push it to sendmail.
c) Consistent with frontend capabilities. If a frontend has the
smarts to RFC 2047 encode the headers before sending the mail, it
probably has the smarts to RFC 2047 decode them before presenting
the template to a user for editing.
Also, as far as I know, nothing automated consumes the reply text
format, so changing this should not cause serious problems. (And if
anything does still consume this format, it probably gets these
encoding issues wrong anyway.)
Previously, the References header code seemed to assume
notmuch_message_get_header would return NULL if the header was not
present, but it actually returns "". As a result of this, it was
inserting an unnecessary space when concatenating an empty or missing
original references header with the new reference.
This shows up in only two tests because the text reply format later
passes the whole reply template through g_mime_filter_headers, which
has the side effect of stripping out this extra space.
This allows specifying config file as a top level argument to notmuch,
and generally makes it possible to override config file options in
main(), without having to touch the subcommands.
If the config file does not exist, one will be created for the notmuch
main command and setup and help subcommands. Help is special in this
regard; the config is created just to avoid errors about missing
config, but it will not be saved.
This also makes notmuch config the talloc context for subcommands.
We now have a notmuch_config_is_new() function to query whether a
config was created or not. Change the notmuch_config_open() is_new
parameter into boolean create_new to determine whether the function
should create a new config if one doesn't exist. This reduces the
complexity of the API.
All the structured output functions in notmuch-reply and notmuch-show
are renamed to a generic name (as they do not contain any json-specific
code anyway). This patch is a preparation to actually using the new
S-Expression sprinter in notmuch-reply and notmuch-show.
There are several levels of function calls between where we create the
sprinter and the call to the part formatter in show_message. This
feeds the sprinter through all of them and into the part formatters.
This option allows the caller to suppress the output of the bodies of
the messages. Currently this is only implemented for format=json.
This is used by notmuch-pick.el (although not needed) because it gives
a speed-up of at least a factor of a two (and in some cases a speed up
of more than a factor of 8); moreover it reduces the memory usage in
emacs hugely.
