In ee897cab8b the upgrade tests from pre v3 databases were
removed. The reasons for that are still valid, but we should still
test the code paths that do the upgrade, and it is relatively
straightforward to do that for v3 to v3 upgrades.
json_check_nodes.py exists in source tree, not in out of tree
build tree. Added -B to the execution so source tree is not
"polluted" by a .pyc file when json_check_nodes.py is executed.
When creating run_emacs.sh make it load .elc files from out of
tree build tree, not from source tree if such files existed.
If existed, those may be outdated, or even created by some other
emacs than the one that was used to build .elc files in out of
tree build dir.
Several functions in test/test-lib.sh used variable names that are
also used outside of those functions (e.g. $output and $expected are
used in many of the test scripts), but they are not expected to
communicate via those variables.
We mark those variables "local" within test-lib.sh so that they do not
get clobbered when used outside test-lib.
We also move the local variable declarations to beginning of each
function, to avoid weird gotchas with local variable declarations as
described in https://tldp.org/LDP/abs/html/localvar.html.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
GPGME has a strange failure mode when it is in offline mode, and/or
when certificates don't have any CRLs: in particular, it refuses to
accept the validity of any certificate other than a "root" cert.
This can be worked around by setting the `disable-crl-checks`
configuration variable for gpgsm.
I've reported this to the GPGME upstream at
https://dev.gnupg.org/T4883, but I have no idea how it will be
resolved. In the meantime, we'll just work around it.
Note that this fixes the test for verification of
id:smime-multipart-signed@protected-headers.example, because
multipart/signed messages are already handled correctly (one-part
PKCS#7 messages will get fixed later).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This test does exactly what it says on the tin. It expects JSON data
to be parseable by Python, at least.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This is taken from the same Internet Draft that test/smime/ca.crt
comes from. See that draft for more details.
https://www.ietf.org/id/draft-dkg-lamps-samples-02.html#name-pkcs12-object-for-bob
We don't use it yet, but it will be used to decrypt other messages in
the test suite.
Note that we include it here with an empty passphrase, rather than
with the passphrase "bob" that it is supplied with in the I-D. The
underlying cryptographic material is the same, but this way we can
import cleanly into gpgsm without having a passphrase set on it (gpgsm
converts an empty-string passphrase into no passphrase at all on
import).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Without this fix, we couldn't run both add_gnupg_home and
add_gpgsm_home in the same test script.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The documentation for message mode clearly states that EasyPG (which
uses GnuPG) is the default and recommended way to use S/MIME with
mml-secure:
[0] https://www.gnu.org/software/emacs/manual/html_node/message/Using-S_002fMIME.html
To ensure that this mode works, we just need to import the secret key
in question into gpgsm in addition to the public key. gpgsm should be
able pick the right keys+certificates to use based on To/From headers,
so we don't have to specify anything manually in the #secure mml tag.
The import process from the OpenSSL-preferred form (cert+secretkey) is
rather ugly, because gpgsm wants to see a PKCS#12 object when
importing secret keys.
Note that EasyPG generates the more modern Content-Type:
application/pkcs7-signature instead of application/x-pkcs7-signature
for the detached signature.
We are also obliged to manually set gpgsm's include-certs setting to 1
because gpgsm defaults to send "everything but the root cert". In our
weird test case, the certificate we're using is self-signed, so it
*is* the root cert, which means that gpgsm doesn't include it by
default. Setting it to 1 forces inclusion of the signer's cert, which
satisfies openssl's smime subcommand. See https://dev.gnupg.org/T4878
for more details.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This CA is useful for test suites and the like, but is not an
actually-secure CA, because its secret key material is also published.
I plan to use it for its intended purpose in the notmuch test suite.
It was copied from this Internet Draft:
https://tools.ietf.org/id/draft-dkg-lamps-samples-01.html#name-certificate-authority-certi
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
GnuPG's gpgsm, like gpg, should always be used with --batch when it is
invoked in a non-interactive environment.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
These can be used e.g. to override return values for functions, in
place of the existing scripting of gdb.
This prepends to LD_PRELOAD rather than clobbering it, thanks to a
suggestion from Tomi Ollila.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This makes it easier to write fairly compact, readable tests of json
output, without needing to sanitize away parts that we don't care
about.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Done via $COLORS_WITHOUT_TTY environment variable as passing options
to commands through parallel(1) does not look trivial.
Reorganized color checking in test-lib.sh a bit for this (perhaps
were not fully necessary but rest still an improvement):
- color checking commands in subshell are not run before arg parsing
(args may disable colors with --no-color)
- [ -t 1 ] is checked before forking subshell
Added initialization and checking of smtp_dummy_port
like it was done with smtp_dummy_pid.
Made those function-local variables.
One 8 spaces to tab consistency conversion.
And last, but definitely not least; while doing above
noticed that there were quite a few double-quoted strings
where $@ was in the middle of it -- replaced those with $*
for robustness ("...$@..." expands params to separate words,
"...$*..." params expands to single word).
Without this stdin may be anything that parent process provided for it.
Test processes might have tried to read something from it, which would
have caused undeterministic behavior.
E.g. gdb(1) tries to do tty related ioctls on fd 0 (and fd 1 and fd 2,
but those are redirected to 'test.output' before test runs).
The add_email_corpus test utility includes logic that tries to re-use
an index of the corpus if available. This was seemingly done as an
optimization, so that every test that uses the corpus didn't have to
create it's own index of the corpus. However, this has the perverse
side effect of entangling tests together, and breaks parallelization.
Forcing each test to do it's own index does increase the overall time
of the test slightly (~6%), but this will be more than made up for in
the next patch that introduces paraellization.
The typical use case for gpg is that if you control a secret key, you
mark it with "ultimate" ownertrust.
The opaque --import-ownertrust mechanism is GnuPG's standard mechanism
to set up ultimate ownertrust (the ":6:" means "ultimate", for
whatever reason).
We adjust the test suite to match this change, inverting the sense of
one test: since the default is now that the user ID of the suite's own
key is valid, we change the test to make sure that the user ID is not
emitted when it is *not* valid.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The user ID on the self-test is a little bit clunky-looking. It also
may end up showing up elsewhere in the test suite. Centralizing the
user ID in one place should make it easier to handle if it ever
changes, and should make tests easier to read.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
note that "notmuch-show for message with invalid From" is still broken
in T310-emacs.sh. It would be good to debug what's going on there and
try to get it fixed!
signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
If a test has added a GnuPG homedir, it may well want to know the
fingerprint. This saves us from having to redefine this magic string
in multiple places when more tests eventually use the GnuPG homedir.
This way, one can build for a different Ruby than $PATH/ruby
(e. g. different versions, or Ruby in other paths).
Signed-off-by: Thomas Schneider <qsx@chaotikum.eu>
the command-line interface for indexing (reindex, new, insert) used
--try-decrypt; and the configuration records used index.try_decrypt.
But by comparison with "show" and "reply", there doesn't seem to be
any reason for the "try" prefix.
This changeset adjusts the command-line interface and the
configuration interface.
For the moment, i've left indexopts_{set,get}_try_decrypt alone. The
subsequent changeset will address those.
In 8e7fb88237 Jani replaced the use of $(pwd -P) to find the
TEST_DIRECTORY in order to better support out of tree
builds. Unfortunately the performance-tests need a different value for
the variable and were thus broken.
This commit splits out the setting of this variable for the two sets
of tests. Performance tests still don't work out of tree, because
the handling of the downloaded corpus needs to be updated.
Subsequent patches may want to send GNU-style --long-arguments to
notmuch new in the test suite, in particular when invoking
emacs_fcc_message. This changeset makes that possible.
The primary motivation here is to fix TMP_DIRECTORY cleanup prior to
running each test when the current working directory is not the test
subdirectory. Tests with failures would leave their TMP_DIRECTORY
directory behind for debugging, and repeated out-of-tree test runs
would have old temp directories. (This lead to e.g. T310-emacs.sh
hanging because emacs would prompt for overwriting files.)
We remove the likely anyway defunct --root test option while at it,
just to be on the safe side when doing 'rm -rf' on the TMP_DIRECTORY.
Changed "" quotes to '' as we're not supposed to dynamically
alter python program (via shell $variable expansion).
Added space to python program to match general python style.
Replaced $* with 'idiomatic' "$@" to serve as better example.
In [1], Vladimir Panteleev observed that the In-Reply-To and
References headers could be wrapped in the 'default' output format of
notmuch-reply, depending on the version of Emacs creating the
message. In my own experiments notmuch-reply sometimes wraps headers
with only one message-id if that message-id is long enough. However it
happens, this causes the previous approach using grep to fail.
Since I found the proposed unwrapping shell fragment in [1] a bit hard
to follow, I decided to write a little python script instead. Then
Tomi suggested a slight generalization of my script, and here we are.
[1] id:20170817175145.3204-7-notmuch@thecybershadow.net
json.tool does not sort or otherwise normalize the order of JSON keys
in its output, which can result in test failures on some test systems.
Instead, use a one-line Python script passed to the interpreter
directly on its command line. Use sort_keys=True for json.dump to
ensure the key order is normalized. The script works with both Python
2 and 3.
* test/test-lib.sh: Update test_expect_equal_json.
New function at_exit_function registers given function to be called
at script termination.
Functions so registered are called in the reverse order of their
registration; no arguments are passed.
Function is called only once; re-adding with function name already
registered will remove previous registration.
New function rm_exit_function can be used to remove registration.
Modules (and possibly test-lib.sh functions) in future commits will
register such functions.
Unify the subtests by requiring test_begin_subtest before
test_expect_code. (Similar change for test_expect_success has already
been done.)
This increases clarity in the test scripts by having a separate line
for the start of the subtest with the heading, and makes it possible
to simplify the test infrastructure by making all subtests similar.
Unify the subtests by requiring test_begin_subtest before
test_expect_success. (Similar change for test_expect_code will
follow.)
This increases clarity in the test scripts by having a separate line
for the start of the subtest with the heading, and makes it possible
to simplify the test infrastructure by making all subtests similar.
The only place where we use the implicit prereq check is T000-basic.sh
where we check that it works. It's an added complication that we don't
use. Remove it.
The test_have_prereq function can still be used for the same effect in
subtests that use test_begin_subtest. For now, this will make it
impossible to have prereqs in one-line subtests that don't require
test_begin_subtest. This will be fixed in follow-up work.
