The "notmuch new" command will now efficiently notice if any files or
directories have been removed from the mail store and will
appropriately update its database.
Any given mail message (as determined by the message ID) may have
multiple corresponding filenames, and notmuch will return one of
them. When a filen is deleted, the corresponding filename will be
removed from the message in the database. When the last filename is
removed from a message, that message will be entirely removed from the
database.
All file additions are handled before any file removals so that rename
is supported properly.
It is essential to defer the actual removal of any filenames from the
database until we are entirely done adding any new files. This is to
avoid any information loss from the database in the case of a renamed
file or directory.
Note that we're *still* not actually doing any removal---still just
printing messages indicating the filenames that were detected as
removed. But we're at least now printing those messages at a time when
we actually *can* do the actual removal.
This takes advantage of the notmuch_directory_t interfaces added
recently (with cooresponding storage of directory documents in the
database) to detect when files or entire directories are deleted or
renamed within the mail store.
This also fixes the recent regression where *all* files would be
processed by every run of "notmuch new", (now only new files are
processed once again).
The deleted files and directories are only detected so far. They
aren't properly removed from the database.
Previously, we were re-scanning the entire list of entries for every
directory entry. Instead, we can simply check if the entries look like
a maildir once, up-front.
We now do two scans over the entries returned from scandir. The first
scan is looking for directories (and making the recursive call). The
second scan is looking for new files to add to the database.
This is easier to read than the previous code which had a single loop
and some if statements with ridiculously long bodies. It also has the
advantage that once the directory scan is complete we can do a single
comparison of the filesystem and database mtimes and entirely skip the
second scan if it's not needed.
Previously we had an array named "namelist" and its count named
"num_entries". We now use an array name of "fs_entries" and a count
named "num_fs_entries" to try to preserve sanity.
We were previousl using the stat for two reasons. One was to obtain
the mtime of the file. This usage was removed in the previous commit,
(since the mtime is unreliable in the case of a file being moved into
the mail store).
The second reason was to identify regular and directory file
types. But this information is already available in the result we get
from scandir.
What's left is simply a stat for each directory in the mailstore,
(which we are still using to compare filesystem mtime with the mtime
stored in the database).
This check was buggy in that moving a pre-existing file into the mail
store, (where the file existed before the last run of "notmuch new"),
does not update the mtime of the file. So the message would never be
added to the database.
The fix here is not practical in the long run, (since it causes *all*
files in the mail store to be processed in every run of "notmuch new"
(!)). But this change will let us drop a stat() call that we don't
otherwise need and will help move us toward proper database-backed
detection of new files, (which will fix the bug without the
performance impact of the current fix).
The previous name of "path_mtime" was very ambiguous. The new names
are much more obvious (fs_mtime is the mtime from the filesystem and
db_mtime is the mtime from the database).
This was a very dangerous bug. An interrupted "notmuch new" session
would still update the timestamp for the directory in the
database. This would result in mail files that were not processed due
to the original interruption *never* being picked up by future runs of
"notmuch new". Yikes!
This new directory ojbect provides all the infrastructure needed to
detect when files or directories are deleted or renamed. There's still
code needed on top of this (within "notmuch new") to actually do that
detection.
This commit contains my changes to the API proposed by Keith. Nothing
is dramatically different. There are minor things like changing
notmuch_files_t to notmuch_filenames_t and then various things needed
for completeness as noticed while implementing this, (such as
notmuch_directory_destroy and notmuch_directory_set_mtime).
This will allow applications to support the removal of messages, (such
as when a file is deleted from the mail store). No removal support is
provided yet in commands such as "notmuch new".
The existing find_doc_ids function is convenient when the caller
doesn't want to be bothered constructing a term. But when the caller
*does* have the term already, that interface is just wasteful. So we
export a lower-level interface that maps a pre-constructed term to a
document-ID iterators.
The code to map a filename to a direntry is something that we're going
to want in a future _remove_message function, so put it in a new
function _notmuch_database_filename_to_direntry .
The library interface is unchanged so far, (still just
notmuch_database_add_message), but internally, the old
_set_filename function is now _add_filename instead.
Instead of storing the complete message filename in the data portion
of a mail document we now store a 'direntry' term that contains the
document ID of a directory document and also the basename of the
message filename within that directory. This will allow us to easily
store multple filenames for a single message, and will also allow us
to find mail documents for files that previously existed in a
directory but that have since been deleted.
Some pending commits want the _split_path functionality separate from
mapping a directory to a document ID. The split_path function now
returns the basename as well as the directory name.
We're planning to have mail documents refer to directory documents for
the path of the containing directory. To support this, we need the
path in the data, (since the path in the 'directory' term can be
irretrievable as it will be the SHA1 sum of the path for a very long
path).
We'll soon have mail documents referring to their parent directory's
directory documents, so we'll need access to _find_parent_id in files
such as message.cc.
Storing the document ID of the parent of each directory document will
allow us to find all child-directory documents for a given directory
document. We will need this in order to detect directories that have
been removed from the mail store, (though we aren't yet doing this).
The recent change from storing absolute paths to relative paths means
that new directory documents will already be created, (and the old
ones will just linger stale in the database). Given that, we might as
well put a clean name on the term in the new documents, (and no real
flag day is needed).
We were already storing relative mail filenames, so this is consistent
with that. Additionally, it means that directory documents remain
valid even if the database is relocated within its containing
filesystem.
We'll soon be having multiple entry points that accept a filename
path, so we want common code for getting a relative path from a
potentially absolute path.
This was really the last thing keeping the initial run of "notmuch
new" being different from all other runs. And I'm taking a fresh
look at the performance of "notmuch new" anyway, so I think we can
safely drop this optimization.
And fix the initialization such that the private enum will always have
distinct values from the public enum even if we similarly miss the
addition of a new public value in the future.
Several people complained that the humor wore thin very quickly. The
most significant case of "not much mail" is when counting the user's
initial mail collection. We've promised on the web page that no matter
how much mail the user has, notmuch will consider it to be "not much"
so let's say so. (This message was in place very early on, but was
inadvertently dropped at some point.)
The in-development version of Xapian provides a config program named
xapian-config-1.1 while the released version provides a program named
xapian-config instead. By default, we now try each of these in turn,
and we also allow the user to set a XAPIAN_CONFIG environment variable
to explicitly specify a particular program.
We've received a user report that the hidden citations were annoying
since the user couldn't tell what was being referred to by subsequent
text. Apparently it wasn't obvious enough that the hidden citation
could be revealed by clicking or by pressing Enter. So make the button
text say as much.
In the message mentioned in the previous commit, an ASCII diagram was
included in which '>' was used as the first non-whitespace character
in a line. Notmuch previously (and mistakenly) regarded this as a
citation.
We fix this by only regarding a '>' in the first column of an email as
introducing a citation.
Thanks to Dirk Hohndel for reporting the bug. The infinite loop was first
noticed in the following message (available from the Linux kernel mailing list):
alpine.LFD.2.00.0912081304070.3560@localhost.localdomain
Note that the bug does not show up when viewing the message in
isolation---the bug was triggered only when viewing this file indented
to a depth of at least 13.
The fix is simply to use a marker rather than an integer position when
recording a point we plan to move back to later, (since inserting the
indented button causes the buffer position of the desired marker to
change).
Previously only mime parts that indicated specified a "disposition" of
"attachment" were saved. However there are time when it is important
to be able to save inline content as well. After this commit any mime
part that specifies a filename will be considered when saving
attachments.
Similar to the way thread-viewing was broken after a thread was
archived, (and recently fixed), tag manipulation has also been broken
when the thread no longer matches the current search.
This also means that the behavior of '+' and '-' are now different
than that of '*'. The '+' and '-' bindings now return to the previous
behavior old affecting all messages in the thread, (and not simply
those matching the search).
I actually prefer this behavior, since otherwise a '-' operation on a
thread might not actually remove the tag from the thread, (since it
could operate on a subset of the thread and not hit all messages with
the given tag).
So I'd now like to fix '*' to be consistent with '+' and '-', for
which we add an item to TODO.
This fixes the annoying bug of archiving a thread, and then going back
to open it and getting an error. It needs the notmuch-show API
changing patch of 1259979997-31544-3-git-send-email-david@tethera.net.
Also modify the one call to notmuch-show in notmuch.el. This makes
the call (notmuch-show thread-id) will work when there is no binding
for notmuch-search-query-string; e.g. when called from user code
outside notmuch.
Add functions notmuch-search-find-authors and notmuch-find-subject to
match notmuch-find-thread-id. These functions are just a wrapper
around get-text-property, but in principle that could change.
This would provide support for "muted" threads, as well as allowing for negative
filtering based on messages not matched by the original search, (but present in
threads that do have at least one matched message).
