Force braces around multi-line statements (#3094)

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

.clang-tidy

@@ -68,7 +68,6 @@ Checks: >-
   -modernize-use-nodiscard,
   -mpi-*,
   -objc-*,
-  -readability-braces-around-statements,
   -readability-convert-member-functions-to-static,
   -readability-else-after-return,
   -readability-function-cognitive-complexity,
@@ -109,6 +108,8 @@ CheckOptions:
     value:           'make_unique'
   - key:             modernize-make-unique.MakeSmartPtrFunctionHeader
     value:           'esphome/core/helpers.h'
+  - key:             readability-braces-around-statements.ShortStatementLines
+    value:           2
   - key:             readability-identifier-naming.LocalVariableCase
     value:           'lower_case'
   - key:             readability-identifier-naming.ClassCase

esphome/components/ac_dimmer/ac_dimmer.cpp

@@ -52,10 +52,10 @@ uint32_t IRAM_ATTR HOT AcDimmerDataStore::timer_intr(uint32_t now) {
     this->gate_pin.digital_write(false);
   }
 
-  if (time_since_zc < this->enable_time_us)
+  if (time_since_zc < this->enable_time_us) {
     // Next event is enable, return time until that event
     return this->enable_time_us - time_since_zc;
-  else if (time_since_zc < disable_time_us) {
+  } else if (time_since_zc < disable_time_us) {
     // Next event is disable, return time until that event
     return this->disable_time_us - time_since_zc;
   }
@@ -74,9 +74,10 @@ uint32_t IRAM_ATTR HOT timer_interrupt() {
   uint32_t min_dt_us = 1000;
   uint32_t now = micros();
   for (auto *dimmer : all_dimmers) {
-    if (dimmer == nullptr)
+    if (dimmer == nullptr) {
       // no more dimmers
       break;
+    }
     uint32_t res = dimmer->timer_intr(now);
     if (res != 0 && res < min_dt_us)
       min_dt_us = res;
@@ -212,12 +213,13 @@ void AcDimmer::dump_config() {
   LOG_PIN("  Zero-Cross Pin: ", this->zero_cross_pin_);
   ESP_LOGCONFIG(TAG, "   Min Power: %.1f%%", this->store_.min_power / 10.0f);
   ESP_LOGCONFIG(TAG, "   Init with half cycle: %s", YESNO(this->init_with_half_cycle_));
-  if (method_ == DIM_METHOD_LEADING_PULSE)
+  if (method_ == DIM_METHOD_LEADING_PULSE) {
     ESP_LOGCONFIG(TAG, "   Method: leading pulse");
-  else if (method_ == DIM_METHOD_LEADING)
+  } else if (method_ == DIM_METHOD_LEADING) {
     ESP_LOGCONFIG(TAG, "   Method: leading");
-  else
+  } else {
     ESP_LOGCONFIG(TAG, "   Method: trailing");
+  }
 
   LOG_FLOAT_OUTPUT(this);
   ESP_LOGV(TAG, "  Estimated Frequency: %.3fHz", 1e6f / this->store_.cycle_time_us / 2);

esphome/components/adc/adc_sensor.cpp

@@ -65,9 +65,9 @@ void ADCSensor::dump_config() {
 
 #ifdef USE_ESP32
   LOG_PIN("  Pin: ", pin_);
-  if (autorange_)
+  if (autorange_) {
     ESP_LOGCONFIG(TAG, " Attenuation: auto");
-  else
+  } else {
     switch (this->attenuation_) {
       case ADC_ATTEN_DB_0:
         ESP_LOGCONFIG(TAG, " Attenuation: 0db (max 1.1V)");
@@ -84,6 +84,7 @@ void ADCSensor::dump_config() {
       default:  // This is to satisfy the unused ADC_ATTEN_MAX
         break;
     }
+  }
 #endif  // USE_ESP32
   LOG_UPDATE_INTERVAL(this);
 }

esphome/components/am2320/am2320.cpp

@@ -19,13 +19,15 @@ uint16_t crc_16(uint8_t *ptr, uint8_t length) {
   //------------------------------
   while (length--) {
     crc ^= *ptr++;
-    for (i = 0; i < 8; i++)
+    for (i = 0; i < 8; i++) {
       if ((crc & 0x01) != 0) {
         crc >>= 1;
         crc ^= 0xA001;
-      } else
+      } else {
         crc >>= 1;
       }
+    }
+  }
   return crc;
 }
 

esphome/components/am43/am43.cpp

@@ -79,10 +79,11 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
           auto status = esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_,
                                                  packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP,
                                                  ESP_GATT_AUTH_REQ_NONE);
-          if (status)
+          if (status) {
             ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(),
                      status);
           }
+        }
         this->current_sensor_ = 0;
       }
       break;

esphome/components/am43/cover/am43_cover.cpp

@@ -30,11 +30,12 @@ void Am43Component::loop() {
         esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, packet->length,
                                  packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
     ESP_LOGI(TAG, "[%s] Logging into AM43", this->get_name().c_str());
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] Error writing set_pin to device, error = %d", this->get_name().c_str(), status);
-    else
+    } else {
       this->logged_in_ = true;
     }
+  }
 }
 
 CoverTraits Am43Component::get_traits() {

esphome/components/anova/anova.cpp

@@ -114,11 +114,12 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
           auto status =
               esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, pkt->length,
                                        pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-          if (status)
+          if (status) {
             ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(),
                      status);
           }
         }
+      }
       break;
     }
     default:

esphome/components/apds9960/apds9960.cpp

@@ -225,9 +225,10 @@ void APDS9960::read_gesture_data_() {
 
   uint8_t fifo_level;
   APDS9960_WARNING_CHECK(this->read_byte(0xAE, &fifo_level), "Reading FIFO level failed.");
-  if (fifo_level == 0)
+  if (fifo_level == 0) {
     // no data to process
     return;
+  }
 
   APDS9960_WARNING_CHECK(fifo_level <= 32, "FIFO level has invalid value.")
 

esphome/components/api/api_connection.cpp

@@ -469,10 +469,11 @@ void APIConnection::switch_command(const SwitchCommandRequest &msg) {
   if (a_switch == nullptr)
     return;
 
-  if (msg.state)
+  if (msg.state) {
     a_switch->turn_on();
-  else
+  } else {
     a_switch->turn_off();
+  }
 }
 #endif
 
@@ -810,10 +811,11 @@ DeviceInfoResponse APIConnection::device_info(const DeviceInfoRequest &msg) {
   return resp;
 }
 void APIConnection::on_home_assistant_state_response(const HomeAssistantStateResponse &msg) {
-  for (auto &it : this->parent_->get_state_subs())
+  for (auto &it : this->parent_->get_state_subs()) {
     if (it.entity_id == msg.entity_id && it.attribute.value() == msg.attribute) {
       it.callback(msg.state);
     }
+  }
 }
 void APIConnection::execute_service(const ExecuteServiceRequest &msg) {
   bool found = false;

esphome/components/api/api_server.cpp

@@ -80,9 +80,10 @@ void APIServer::setup() {
   if (esp32_camera::global_esp32_camera != nullptr && !esp32_camera::global_esp32_camera->is_internal()) {
     esp32_camera::global_esp32_camera->add_image_callback(
         [this](const std::shared_ptr<esp32_camera::CameraImage> &image) {
-          for (auto &c : this->clients_)
+          for (auto &c : this->clients_) {
             if (!c->remove_)
               c->send_camera_state(image);
+          }
         });
   }
 #endif

esphome/components/api/proto.h

@@ -55,18 +55,20 @@ class ProtoVarInt {
   }
   int32_t as_sint32() const {
     // with ZigZag encoding
-    if (this->value_ & 1)
+    if (this->value_ & 1) {
       return static_cast<int32_t>(~(this->value_ >> 1));
-    else
+    } else {
       return static_cast<int32_t>(this->value_ >> 1);
     }
+  }
   int64_t as_sint64() const {
     // with ZigZag encoding
-    if (this->value_ & 1)
+    if (this->value_ & 1) {
       return static_cast<int64_t>(~(this->value_ >> 1));
-    else
+    } else {
       return static_cast<int64_t>(this->value_ >> 1);
     }
+  }
   void encode(std::vector<uint8_t> &out) {
     uint32_t val = this->value_;
     if (val <= 0x7F) {
@@ -220,10 +222,11 @@ class ProtoWriteBuffer {
   }
   void encode_sint32(uint32_t field_id, int32_t value, bool force = false) {
     uint32_t uvalue;
-    if (value < 0)
+    if (value < 0) {
       uvalue = ~(value << 1);
-    else
+    } else {
       uvalue = value << 1;
+    }
     this->encode_uint32(field_id, uvalue, force);
   }
   template<class C> void encode_message(uint32_t field_id, const C &value, bool force = false) {

esphome/components/as3935/as3935.cpp

@@ -58,10 +58,11 @@ void AS3935Component::loop() {
 
 void AS3935Component::write_indoor(bool indoor) {
   ESP_LOGV(TAG, "Setting indoor to %d", indoor);
-  if (indoor)
+  if (indoor) {
     this->write_register(AFE_GAIN, GAIN_MASK, INDOOR, 1);
-  else
+  } else {
     this->write_register(AFE_GAIN, GAIN_MASK, OUTDOOR, 1);
+  }
 }
 // REG0x01, bits[3:0], manufacturer default: 0010 (2).
 // This setting determines the threshold for events that trigger the

esphome/components/ballu/ballu.cpp

@@ -130,10 +130,10 @@ bool BalluClimate::on_receive(remote_base::RemoteReceiveData data) {
   for (int i = 0; i < BALLU_STATE_LENGTH; i++) {
     // Read bit
     for (int j = 0; j < 8; j++) {
-      if (data.expect_item(BALLU_BIT_MARK, BALLU_ONE_SPACE))
+      if (data.expect_item(BALLU_BIT_MARK, BALLU_ONE_SPACE)) {
         remote_state[i] |= 1 << j;
 
-      else if (!data.expect_item(BALLU_BIT_MARK, BALLU_ZERO_SPACE)) {
+      } else if (!data.expect_item(BALLU_BIT_MARK, BALLU_ZERO_SPACE)) {
         ESP_LOGV(TAG, "Byte %d bit %d fail", i, j);
         return false;
       }

esphome/components/bang_bang/bang_bang_climate.cpp

@@ -21,12 +21,13 @@ void BangBangClimate::setup() {
     restore->to_call(this).perform();
   } else {
     // restore from defaults, change_away handles those for us
-    if (supports_cool_ && supports_heat_)
+    if (supports_cool_ && supports_heat_) {
       this->mode = climate::CLIMATE_MODE_HEAT_COOL;
-    else if (supports_cool_)
+    } else if (supports_cool_) {
       this->mode = climate::CLIMATE_MODE_COOL;
-    else if (supports_heat_)
+    } else if (supports_heat_) {
       this->mode = climate::CLIMATE_MODE_HEAT;
+    }
     this->change_away_(false);
   }
 }
@@ -56,11 +57,12 @@ climate::ClimateTraits BangBangClimate::traits() {
   if (supports_cool_ && supports_heat_)
     traits.add_supported_mode(climate::CLIMATE_MODE_HEAT_COOL);
   traits.set_supports_two_point_target_temperature(true);
-  if (supports_away_)
+  if (supports_away_) {
     traits.set_supported_presets({
         climate::CLIMATE_PRESET_HOME,
         climate::CLIMATE_PRESET_AWAY,
     });
+  }
   traits.set_supports_action(true);
   return traits;
 }
@@ -82,17 +84,19 @@ void BangBangClimate::compute_state_() {
   if (too_cold) {
     // too cold -> enable heating if possible and enabled, else idle
     if (this->supports_heat_ &&
-        (this->mode == climate::CLIMATE_MODE_HEAT_COOL || this->mode == climate::CLIMATE_MODE_HEAT))
+        (this->mode == climate::CLIMATE_MODE_HEAT_COOL || this->mode == climate::CLIMATE_MODE_HEAT)) {
       target_action = climate::CLIMATE_ACTION_HEATING;
-    else
+    } else {
       target_action = climate::CLIMATE_ACTION_IDLE;
+    }
   } else if (too_hot) {
     // too hot -> enable cooling if possible and enabled, else idle
     if (this->supports_cool_ &&
-        (this->mode == climate::CLIMATE_MODE_HEAT_COOL || this->mode == climate::CLIMATE_MODE_COOL))
+        (this->mode == climate::CLIMATE_MODE_HEAT_COOL || this->mode == climate::CLIMATE_MODE_COOL)) {
       target_action = climate::CLIMATE_ACTION_COOLING;
-    else
+    } else {
       target_action = climate::CLIMATE_ACTION_IDLE;
+    }
   } else {
     // neither too hot nor too cold -> in range
     if (this->supports_cool_ && this->supports_heat_ && this->mode == climate::CLIMATE_MODE_HEAT_COOL) {
@@ -107,9 +111,10 @@ void BangBangClimate::compute_state_() {
   this->switch_to_action_(target_action);
 }
 void BangBangClimate::switch_to_action_(climate::ClimateAction action) {
-  if (action == this->action)
+  if (action == this->action) {
     // already in target mode
     return;
+  }
 
   if ((action == climate::CLIMATE_ACTION_OFF && this->action == climate::CLIMATE_ACTION_IDLE) ||
       (action == climate::CLIMATE_ACTION_IDLE && this->action == climate::CLIMATE_ACTION_OFF)) {

esphome/components/ble_client/ble_client.cpp

@@ -252,9 +252,10 @@ float BLEClient::parse_char_value(uint8_t *value, uint16_t length) {
 }
 
 BLEService *BLEClient::get_service(espbt::ESPBTUUID uuid) {
-  for (auto *svc : this->services_)
+  for (auto *svc : this->services_) {
     if (svc->uuid == uuid)
       return svc;
+  }
   return nullptr;
 }
 
@@ -272,19 +273,24 @@ BLECharacteristic *BLEClient::get_characteristic(uint16_t service, uint16_t chr)
 }
 
 BLEDescriptor *BLEClient::get_config_descriptor(uint16_t handle) {
-  for (auto &svc : this->services_)
+  for (auto &svc : this->services_) {
-    for (auto &chr : svc->characteristics)
+    for (auto &chr : svc->characteristics) {
-      if (chr->handle == handle)
+      if (chr->handle == handle) {
-        for (auto &desc : chr->descriptors)
+        for (auto &desc : chr->descriptors) {
           if (desc->uuid == espbt::ESPBTUUID::from_uint16(0x2902))
             return desc;
+        }
+      }
+    }
+  }
   return nullptr;
 }
 
 BLECharacteristic *BLEService::get_characteristic(espbt::ESPBTUUID uuid) {
-  for (auto &chr : this->characteristics)
+  for (auto &chr : this->characteristics) {
     if (chr->uuid == uuid)
       return chr;
+  }
   return nullptr;
 }
 
@@ -379,9 +385,10 @@ void BLECharacteristic::parse_descriptors() {
 }
 
 BLEDescriptor *BLECharacteristic::get_descriptor(espbt::ESPBTUUID uuid) {
-  for (auto &desc : this->descriptors)
+  for (auto &desc : this->descriptors) {
     if (desc->uuid == uuid)
       return desc;
+  }
   return nullptr;
 }
 BLEDescriptor *BLECharacteristic::get_descriptor(uint16_t uuid) {

esphome/components/ble_client/ble_client.h

@@ -126,9 +126,10 @@ class BLEClient : public espbt::ESPBTClient, public Component {
   bool all_nodes_established_() {
     if (this->state() != espbt::ClientState::ESTABLISHED)
       return false;
-    for (auto &node : nodes_)
+    for (auto &node : nodes_) {
       if (node->node_state != espbt::ClientState::ESTABLISHED)
         return false;
+    }
     return true;
   }
 

esphome/components/bme280/bme280.cpp

@@ -214,9 +214,10 @@ void BME280Component::update() {
 float BME280Component::read_temperature_(const uint8_t *data, int32_t *t_fine) {
   int32_t adc = ((data[3] & 0xFF) << 16) | ((data[4] & 0xFF) << 8) | (data[5] & 0xFF);
   adc >>= 4;
-  if (adc == 0x80000)
+  if (adc == 0x80000) {
     // temperature was disabled
     return NAN;
+  }
 
   const int32_t t1 = this->calibration_.t1;
   const int32_t t2 = this->calibration_.t2;
@@ -233,9 +234,10 @@ float BME280Component::read_temperature_(const uint8_t *data, int32_t *t_fine) {
 float BME280Component::read_pressure_(const uint8_t *data, int32_t t_fine) {
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
-  if (adc == 0x80000)
+  if (adc == 0x80000) {
     // pressure was disabled
     return NAN;
+  }
   const int64_t p1 = this->calibration_.p1;
   const int64_t p2 = this->calibration_.p2;
   const int64_t p3 = this->calibration_.p3;

esphome/components/bme680/bme680.cpp

@@ -420,10 +420,11 @@ float BME680Component::calc_humidity_(uint16_t raw_humidity) {
 
   calc_hum = var2 + (var3 + var4 * temp_comp) * var2 * var2;
 
-  if (calc_hum > 100.0f)
+  if (calc_hum > 100.0f) {
     calc_hum = 100.0f;
-  else if (calc_hum < 0.0f)
+  } else if (calc_hum < 0.0f) {
     calc_hum = 0.0f;
+  }
 
   return calc_hum;
 }

esphome/components/bmp280/bmp280.cpp

@@ -161,9 +161,10 @@ float BMP280Component::read_temperature_(int32_t *t_fine) {
     return NAN;
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
-  if (adc == 0x80000)
+  if (adc == 0x80000) {
     // temperature was disabled
     return NAN;
+  }
 
   const int32_t t1 = this->calibration_.t1;
   const int32_t t2 = this->calibration_.t2;
@@ -183,9 +184,10 @@ float BMP280Component::read_pressure_(int32_t t_fine) {
     return NAN;
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
-  if (adc == 0x80000)
+  if (adc == 0x80000) {
     // pressure was disabled
     return NAN;
+  }
   const int64_t p1 = this->calibration_.p1;
   const int64_t p2 = this->calibration_.p2;
   const int64_t p3 = this->calibration_.p3;

esphome/components/ccs811/ccs811.cpp

@@ -39,14 +39,15 @@ void CCS811Component::setup() {
   // set MEAS_MODE (page 5)
   uint8_t meas_mode = 0;
   uint32_t interval = this->get_update_interval();
-  if (interval >= 60 * 1000)
+  if (interval >= 60 * 1000) {
     meas_mode = 3 << 4;  // sensor takes a reading every 60 seconds
-  else if (interval >= 10 * 1000)
+  } else if (interval >= 10 * 1000) {
     meas_mode = 2 << 4;  // sensor takes a reading every 10 seconds
-  else if (interval >= 1 * 1000)
+  } else if (interval >= 1 * 1000) {
     meas_mode = 1 << 4;  // sensor takes a reading every second
-  else
+  } else {
     meas_mode = 4 << 4;  // sensor takes a reading every 250ms
+  }
 
   CHECKED_IO(this->write_byte(0x01, meas_mode))
 

esphome/components/climate_ir_lg/climate_ir_lg.cpp

@@ -137,11 +137,11 @@ bool LgIrClimate::on_receive(remote_base::RemoteReceiveData data) {
     this->swing_mode =
         this->swing_mode == climate::CLIMATE_SWING_OFF ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
   } else {
-    if ((remote_state & COMMAND_MASK) == COMMAND_AUTO)
+    if ((remote_state & COMMAND_MASK) == COMMAND_AUTO) {
       this->mode = climate::CLIMATE_MODE_HEAT_COOL;
-    else if ((remote_state & COMMAND_MASK) == COMMAND_DRY_FAN)
+    } else if ((remote_state & COMMAND_MASK) == COMMAND_DRY_FAN) {
       this->mode = climate::CLIMATE_MODE_DRY;
-    else if ((remote_state & COMMAND_MASK) == COMMAND_HEAT) {
+    } else if ((remote_state & COMMAND_MASK) == COMMAND_HEAT) {
       this->mode = climate::CLIMATE_MODE_HEAT;
     } else {
       this->mode = climate::CLIMATE_MODE_COOL;
@@ -156,16 +156,17 @@ bool LgIrClimate::on_receive(remote_base::RemoteReceiveData data) {
       this->fan_mode = climate::CLIMATE_FAN_AUTO;
     } else if (this->mode == climate::CLIMATE_MODE_COOL || this->mode == climate::CLIMATE_MODE_HEAT ||
                this->mode == climate::CLIMATE_MODE_DRY) {
-      if ((remote_state & FAN_MASK) == FAN_AUTO)
+      if ((remote_state & FAN_MASK) == FAN_AUTO) {
         this->fan_mode = climate::CLIMATE_FAN_AUTO;
-      else if ((remote_state & FAN_MASK) == FAN_MIN)
+      } else if ((remote_state & FAN_MASK) == FAN_MIN) {
         this->fan_mode = climate::CLIMATE_FAN_LOW;
-      else if ((remote_state & FAN_MASK) == FAN_MED)
+      } else if ((remote_state & FAN_MASK) == FAN_MED) {
         this->fan_mode = climate::CLIMATE_FAN_MEDIUM;
-      else if ((remote_state & FAN_MASK) == FAN_MAX)
+      } else if ((remote_state & FAN_MASK) == FAN_MAX) {
         this->fan_mode = climate::CLIMATE_FAN_HIGH;
       }
     }
+  }
   this->publish_state();
 
   return true;

esphome/components/coolix/coolix.cpp

@@ -125,35 +125,38 @@ bool CoolixClimate::on_coolix(climate::Climate *parent, remote_base::RemoteRecei
     parent->swing_mode =
         parent->swing_mode == climate::CLIMATE_SWING_OFF ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
   } else {
-    if ((remote_state & COOLIX_MODE_MASK) == COOLIX_HEAT)
+    if ((remote_state & COOLIX_MODE_MASK) == COOLIX_HEAT) {
       parent->mode = climate::CLIMATE_MODE_HEAT;
-    else if ((remote_state & COOLIX_MODE_MASK) == COOLIX_AUTO)
+    } else if ((remote_state & COOLIX_MODE_MASK) == COOLIX_AUTO) {
       parent->mode = climate::CLIMATE_MODE_HEAT_COOL;
-    else if ((remote_state & COOLIX_MODE_MASK) == COOLIX_DRY_FAN) {
+    } else if ((remote_state & COOLIX_MODE_MASK) == COOLIX_DRY_FAN) {
-      if ((remote_state & COOLIX_FAN_MASK) == COOLIX_FAN_MODE_AUTO_DRY)
+      if ((remote_state & COOLIX_FAN_MASK) == COOLIX_FAN_MODE_AUTO_DRY) {
         parent->mode = climate::CLIMATE_MODE_DRY;
-      else
+      } else {
         parent->mode = climate::CLIMATE_MODE_FAN_ONLY;
+      }
     } else
       parent->mode = climate::CLIMATE_MODE_COOL;
 
     // Fan Speed
     if ((remote_state & COOLIX_FAN_AUTO) == COOLIX_FAN_AUTO || parent->mode == climate::CLIMATE_MODE_HEAT_COOL ||
-        parent->mode == climate::CLIMATE_MODE_DRY)
+        parent->mode == climate::CLIMATE_MODE_DRY) {
       parent->fan_mode = climate::CLIMATE_FAN_AUTO;
-    else if ((remote_state & COOLIX_FAN_MIN) == COOLIX_FAN_MIN)
+    } else if ((remote_state & COOLIX_FAN_MIN) == COOLIX_FAN_MIN) {
       parent->fan_mode = climate::CLIMATE_FAN_LOW;
-    else if ((remote_state & COOLIX_FAN_MED) == COOLIX_FAN_MED)
+    } else if ((remote_state & COOLIX_FAN_MED) == COOLIX_FAN_MED) {
       parent->fan_mode = climate::CLIMATE_FAN_MEDIUM;
-    else if ((remote_state & COOLIX_FAN_MAX) == COOLIX_FAN_MAX)
+    } else if ((remote_state & COOLIX_FAN_MAX) == COOLIX_FAN_MAX) {
       parent->fan_mode = climate::CLIMATE_FAN_HIGH;
+    }
 
     // Temperature
     uint8_t temperature_code = remote_state & COOLIX_TEMP_MASK;
-    for (uint8_t i = 0; i < COOLIX_TEMP_RANGE; i++)
+    for (uint8_t i = 0; i < COOLIX_TEMP_RANGE; i++) {
       if (COOLIX_TEMP_MAP[i] == temperature_code)
         parent->target_temperature = i + COOLIX_TEMP_MIN;
     }
+  }
   parent->publish_state();
 
   return true;

esphome/components/daikin/daikin.cpp

@@ -175,14 +175,15 @@ bool DaikinClimate::parse_state_frame_(const uint8_t frame[]) {
   }
   uint8_t fan_mode = frame[8];
   uint8_t swing_mode = frame[9];
-  if (fan_mode & 0xF && swing_mode & 0xF)
+  if (fan_mode & 0xF && swing_mode & 0xF) {
     this->swing_mode = climate::CLIMATE_SWING_BOTH;
-  else if (fan_mode & 0xF)
+  } else if (fan_mode & 0xF) {
     this->swing_mode = climate::CLIMATE_SWING_VERTICAL;
-  else if (swing_mode & 0xF)
+  } else if (swing_mode & 0xF) {
     this->swing_mode = climate::CLIMATE_SWING_HORIZONTAL;
-  else
+  } else {
     this->swing_mode = climate::CLIMATE_SWING_OFF;
+  }
   switch (fan_mode & 0xF0) {
     case DAIKIN_FAN_1:
     case DAIKIN_FAN_2:
@@ -212,9 +213,9 @@ bool DaikinClimate::on_receive(remote_base::RemoteReceiveData data) {
   for (uint8_t pos = 0; pos < DAIKIN_STATE_FRAME_SIZE; pos++) {
     uint8_t byte = 0;
     for (int8_t bit = 0; bit < 8; bit++) {
-      if (data.expect_item(DAIKIN_BIT_MARK, DAIKIN_ONE_SPACE))
+      if (data.expect_item(DAIKIN_BIT_MARK, DAIKIN_ONE_SPACE)) {
         byte |= 1 << bit;
-      else if (!data.expect_item(DAIKIN_BIT_MARK, DAIKIN_ZERO_SPACE)) {
+      } else if (!data.expect_item(DAIKIN_BIT_MARK, DAIKIN_ZERO_SPACE)) {
         return false;
       }
     }

esphome/components/dallas/esp_one_wire.cpp

@@ -145,9 +145,10 @@ uint64_t ESPOneWire::search() {
     // read its complement
     bool cmp_id_bit = this->read_bit();
 
-    if (id_bit && cmp_id_bit)
+    if (id_bit && cmp_id_bit) {
       // No devices participating in search
       break;
+    }
 
     bool branch;
 
@@ -170,12 +171,13 @@ uint64_t ESPOneWire::search() {
       }
     }
 
-    if (branch)
+    if (branch) {
       // set bit
       this->rom_number8_()[rom_byte_number] |= rom_byte_mask;
-    else
+    } else {
       // clear bit
       this->rom_number8_()[rom_byte_number] &= ~rom_byte_mask;
+    }
 
     // choose/announce branch
     this->write_bit(branch);
@@ -190,9 +192,10 @@ uint64_t ESPOneWire::search() {
 
   if (id_bit_number >= 65) {
     this->last_discrepancy_ = last_zero;
-    if (this->last_discrepancy_ == 0)
+    if (this->last_discrepancy_ == 0) {
       // we're at root and have no choices left, so this was the last one.
       this->last_device_flag_ = true;
+    }
     search_result = true;
   }
 

esphome/components/dht/dht.cpp

@@ -114,10 +114,11 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
       // Wait for rising edge
       while (!this->pin_->digital_read()) {
         if (micros() - start_time > 90) {
-          if (i < 0)
+          if (i < 0) {
             error_code = 1;
-          else
+          } else {
             error_code = 2;
+          }
           break;
         }
       }
@@ -130,10 +131,11 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
       // Wait for falling edge
       while (this->pin_->digital_read()) {
         if ((end_time = micros()) - start_time > 90) {
-          if (i < 0)
+          if (i < 0) {
             error_code = 3;
-          else
+          } else {
             error_code = 4;
+          }
           break;
         }
       }

esphome/components/display/display_buffer.cpp

@@ -176,9 +176,10 @@ void DisplayBuffer::print(int x, int y, Font *font, Color color, TextAlign align
       ESP_LOGW(TAG, "Encountered character without representation in font: '%c'", text[i]);
       if (!font->get_glyphs().empty()) {
         uint8_t glyph_width = font->get_glyphs()[0].glyph_data_->width;
-        for (int glyph_x = 0; glyph_x < glyph_width; glyph_x++)
+        for (int glyph_x = 0; glyph_x < glyph_width; glyph_x++) {
           for (int glyph_y = 0; glyph_y < height; glyph_y++)
             this->draw_pixel_at(glyph_x + x_at, glyph_y + y_start, color);
+        }
         x_at += glyph_width;
       }
 
@@ -425,11 +426,12 @@ int Font::match_next_glyph(const char *str, int *match_length) {
   int hi = this->glyphs_.size() - 1;
   while (lo != hi) {
     int mid = (lo + hi + 1) / 2;
-    if (this->glyphs_[mid].compare_to(str))
+    if (this->glyphs_[mid].compare_to(str)) {
       lo = mid;
-    else
+    } else {
       hi = mid - 1;
     }
+  }
   *match_length = this->glyphs_[lo].match_length(str);
   if (*match_length <= 0)
     return -1;
@@ -454,10 +456,11 @@ void Font::measure(const char *str, int *width, int *x_offset, int *baseline, in
     }
 
     const Glyph &glyph = this->glyphs_[glyph_n];
-    if (!has_char)
+    if (!has_char) {
       min_x = glyph.glyph_data_->offset_x;
-    else
+    } else {
       min_x = std::min(min_x, x + glyph.glyph_data_->offset_x);
+    }
     x += glyph.glyph_data_->width + glyph.glyph_data_->offset_x;
 
     i += match_length;

esphome/components/ektf2232/ektf2232.cpp

@@ -68,9 +68,10 @@ void EKTF2232Touchscreen::loop() {
 
   uint8_t raw[8];
   this->read(raw, 8);
-  for (int i = 0; i < 8; i++)
+  for (int i = 0; i < 8; i++) {
     if (raw[7] & (1 << i))
       touch_count++;
+  }
 
   if (touch_count == 0) {
     for (auto *listener : this->touch_listeners_)

esphome/components/esp32_ble_server/ble_characteristic.cpp

@@ -147,40 +147,46 @@ bool BLECharacteristic::is_failed() {
 }
 
 void BLECharacteristic::set_broadcast_property(bool value) {
-  if (value)
+  if (value) {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ | ESP_GATT_CHAR_PROP_BIT_BROADCAST);
-  else
+  } else {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ & ~ESP_GATT_CHAR_PROP_BIT_BROADCAST);
+  }
 }
 void BLECharacteristic::set_indicate_property(bool value) {
-  if (value)
+  if (value) {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ | ESP_GATT_CHAR_PROP_BIT_INDICATE);
-  else
+  } else {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ & ~ESP_GATT_CHAR_PROP_BIT_INDICATE);
+  }
 }
 void BLECharacteristic::set_notify_property(bool value) {
-  if (value)
+  if (value) {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ | ESP_GATT_CHAR_PROP_BIT_NOTIFY);
-  else
+  } else {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ & ~ESP_GATT_CHAR_PROP_BIT_NOTIFY);
+  }
 }
 void BLECharacteristic::set_read_property(bool value) {
-  if (value)
+  if (value) {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ | ESP_GATT_CHAR_PROP_BIT_READ);
-  else
+  } else {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ & ~ESP_GATT_CHAR_PROP_BIT_READ);
+  }
 }
 void BLECharacteristic::set_write_property(bool value) {
-  if (value)
+  if (value) {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ | ESP_GATT_CHAR_PROP_BIT_WRITE);
-  else
+  } else {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ & ~ESP_GATT_CHAR_PROP_BIT_WRITE);
+  }
 }
 void BLECharacteristic::set_write_no_response_property(bool value) {
-  if (value)
+  if (value) {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ | ESP_GATT_CHAR_PROP_BIT_WRITE_NR);
-  else
+  } else {
     this->properties_ = (esp_gatt_char_prop_t)(this->properties_ & ~ESP_GATT_CHAR_PROP_BIT_WRITE_NR);
+  }
 }
 
 void BLECharacteristic::gatts_event_handler(esp_gatts_cb_event_t event, esp_gatt_if_t gatts_if,

esphome/components/esp32_ble_server/ble_service.cpp

@@ -18,9 +18,10 @@ BLEService::~BLEService() {
 }
 
 BLECharacteristic *BLEService::get_characteristic(ESPBTUUID uuid) {
-  for (auto *chr : this->characteristics_)
+  for (auto *chr : this->characteristics_) {
     if (chr->get_uuid() == uuid)
       return chr;
+  }
   return nullptr;
 }
 

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -58,11 +58,12 @@ void ESP32BLETracker::setup() {
 void ESP32BLETracker::loop() {
   BLEEvent *ble_event = this->ble_events_.pop();
   while (ble_event != nullptr) {
-    if (ble_event->type_)
+    if (ble_event->type_) {
       this->real_gattc_event_handler_(ble_event->event_.gattc.gattc_event, ble_event->event_.gattc.gattc_if,
                                       &ble_event->event_.gattc.gattc_param);
-    else
+    } else {
       this->real_gap_event_handler_(ble_event->event_.gap.gap_event, &ble_event->event_.gap.gap_param);
+    }
     delete ble_event;  // NOLINT(cppcoreguidelines-owning-memory)
     ble_event = this->ble_events_.pop();
   }
@@ -89,11 +90,12 @@ void ESP32BLETracker::loop() {
       device.parse_scan_rst(this->scan_result_buffer_[i]);
 
       bool found = false;
-      for (auto *listener : this->listeners_)
+      for (auto *listener : this->listeners_) {
         if (listener->parse_device(device))
           found = true;
+      }
 
-      for (auto *client : this->clients_)
+      for (auto *client : this->clients_) {
         if (client->parse_device(device)) {
           found = true;
           if (client->state() == ClientState::DISCOVERED) {
@@ -103,6 +105,7 @@ void ESP32BLETracker::loop() {
             }
           }
         }
+      }
 
       if (!found) {
         this->print_bt_device_info(device);

esphome/components/esp32_camera_web_server/camera_web_server.cpp

@@ -87,10 +87,11 @@ void CameraWebServer::on_shutdown() {
 void CameraWebServer::dump_config() {
   ESP_LOGCONFIG(TAG, "ESP32 Camera Web Server:");
   ESP_LOGCONFIG(TAG, "  Port: %d", this->port_);
-  if (this->mode_ == STREAM)
+  if (this->mode_ == STREAM) {
     ESP_LOGCONFIG(TAG, "  Mode: stream");
-  else
+  } else {
     ESP_LOGCONFIG(TAG, "  Mode: snapshot");
+  }
 
   if (this->is_failed()) {
     ESP_LOGE(TAG, "  Setup Failed");

esphome/components/esp8266/preferences.cpp

@@ -98,16 +98,18 @@ static bool load_from_flash(size_t offset, uint32_t *data, size_t len) {
 }
 
 static bool save_to_rtc(size_t offset, const uint32_t *data, size_t len) {
-  for (uint32_t i = 0; i < len; i++)
+  for (uint32_t i = 0; i < len; i++) {
     if (!esp_rtc_user_mem_write(offset + i, data[i]))
       return false;
+  }
   return true;
 }
 
 static bool load_from_rtc(size_t offset, uint32_t *data, size_t len) {
-  for (uint32_t i = 0; i < len; i++)
+  for (uint32_t i = 0; i < len; i++) {
     if (!esp_rtc_user_mem_read(offset + i, &data[i]))
       return false;
+  }
   return true;
 }
 

esphome/components/ezo/ezo.cpp

@@ -75,9 +75,10 @@ void EZOSensor::loop() {
     return;
 
   // some sensors return multiple comma-separated values, terminate string after first one
-  for (size_t i = 1; i < sizeof(buf) - 1; i++)
+  for (size_t i = 1; i < sizeof(buf) - 1; i++) {
     if (buf[i] == ',')
       buf[i] = '\0';
+  }
 
   float val = parse_number<float>((char *) &buf[1]).value_or(0);
   this->publish_state(val);

esphome/components/fingerprint_grow/fingerprint_grow.cpp

@@ -278,10 +278,11 @@ void FingerprintGrowComponent::delete_all_fingerprints() {
 
 void FingerprintGrowComponent::led_control(bool state) {
   ESP_LOGD(TAG, "Setting LED");
-  if (state)
+  if (state) {
     this->data_ = {LED_ON};
-  else
+  } else {
     this->data_ = {LED_OFF};
+  }
   switch (this->send_command_()) {
     case OK:
       ESP_LOGD(TAG, "LED set");

esphome/components/gpio/switch/gpio_switch.cpp

@@ -33,16 +33,18 @@ void GPIOSwitch::setup() {
   }
 
   // write state before setup
-  if (initial_state)
+  if (initial_state) {
     this->turn_on();
-  else
+  } else {
     this->turn_off();
+  }
   this->pin_->setup();
   // write after setup again for other IOs
-  if (initial_state)
+  if (initial_state) {
     this->turn_on();
-  else
+  } else {
     this->turn_off();
+  }
 }
 void GPIOSwitch::dump_config() {
   LOG_SWITCH("", "GPIO Switch", this);

esphome/components/hitachi_ac344/hitachi_ac344.cpp

@@ -19,10 +19,11 @@ void set_bits(uint8_t *const dst, const uint8_t offset, const uint8_t nbits, con
 
 void set_bit(uint8_t *const data, const uint8_t position, const bool on) {
   uint8_t mask = 1 << position;
-  if (on)
+  if (on) {
     *data |= mask;
-  else
+  } else {
     *data &= ~mask;
+  }
 }
 
 uint8_t *invert_byte_pairs(uint8_t *ptr, const uint16_t length) {
@@ -69,10 +70,11 @@ void HitachiClimate::set_temp_(uint8_t celsius, bool set_previous) {
   temp = std::min(celsius, HITACHI_AC344_TEMP_MAX);
   temp = std::max(temp, HITACHI_AC344_TEMP_MIN);
   set_bits(&remote_state_[HITACHI_AC344_TEMP_BYTE], HITACHI_AC344_TEMP_OFFSET, HITACHI_AC344_TEMP_SIZE, temp);
-  if (previous_temp_ > temp)
+  if (previous_temp_ > temp) {
     set_button_(HITACHI_AC344_BUTTON_TEMP_DOWN);
-  else if (previous_temp_ < temp)
+  } else if (previous_temp_ < temp) {
     set_button_(HITACHI_AC344_BUTTON_TEMP_UP);
+  }
   if (set_previous)
     previous_temp_ = temp;
 }
@@ -110,11 +112,12 @@ void HitachiClimate::set_fan_(uint8_t speed) {
 
 void HitachiClimate::set_swing_v_toggle_(bool on) {
   uint8_t button = get_button_();  // Get the current button value.
-  if (on)
+  if (on) {
     button = HITACHI_AC344_BUTTON_SWINGV;              // Set the button to SwingV.
-  else if (button == HITACHI_AC344_BUTTON_SWINGV)  // Asked to unset it
+  } else if (button == HITACHI_AC344_BUTTON_SWINGV) {  // Asked to unset it
     // It was set previous, so use Power as a default
     button = HITACHI_AC344_BUTTON_POWER;
+  }
   set_button_(button);
 }
 
@@ -320,9 +323,9 @@ bool HitachiClimate::on_receive(remote_base::RemoteReceiveData data) {
   for (uint8_t pos = 0; pos < HITACHI_AC344_STATE_LENGTH; pos++) {
     // Read bit
     for (int8_t bit = 0; bit < 8; bit++) {
-      if (data.expect_item(HITACHI_AC344_BIT_MARK, HITACHI_AC344_ONE_SPACE))
+      if (data.expect_item(HITACHI_AC344_BIT_MARK, HITACHI_AC344_ONE_SPACE)) {
         recv_state[pos] |= 1 << bit;
-      else if (!data.expect_item(HITACHI_AC344_BIT_MARK, HITACHI_AC344_ZERO_SPACE)) {
+      } else if (!data.expect_item(HITACHI_AC344_BIT_MARK, HITACHI_AC344_ZERO_SPACE)) {
         ESP_LOGVV(TAG, "Byte %d bit %d fail", pos, bit);
         return false;
       }

esphome/components/hitachi_ac424/hitachi_ac424.cpp

@@ -19,10 +19,11 @@ void set_bits(uint8_t *const dst, const uint8_t offset, const uint8_t nbits, con
 
 void set_bit(uint8_t *const data, const uint8_t position, const bool on) {
   uint8_t mask = 1 << position;
-  if (on)
+  if (on) {
     *data |= mask;
-  else
+  } else {
     *data &= ~mask;
+  }
 }
 
 uint8_t *invert_byte_pairs(uint8_t *ptr, const uint16_t length) {
@@ -69,10 +70,11 @@ void HitachiClimate::set_temp_(uint8_t celsius, bool set_previous) {
   temp = std::min(celsius, HITACHI_AC424_TEMP_MAX);
   temp = std::max(temp, HITACHI_AC424_TEMP_MIN);
   set_bits(&remote_state_[HITACHI_AC424_TEMP_BYTE], HITACHI_AC424_TEMP_OFFSET, HITACHI_AC424_TEMP_SIZE, temp);
-  if (previous_temp_ > temp)
+  if (previous_temp_ > temp) {
     set_button_(HITACHI_AC424_BUTTON_TEMP_DOWN);
-  else if (previous_temp_ < temp)
+  } else if (previous_temp_ < temp) {
     set_button_(HITACHI_AC424_BUTTON_TEMP_UP);
+  }
   if (set_previous)
     previous_temp_ = temp;
 }
@@ -110,11 +112,12 @@ void HitachiClimate::set_fan_(uint8_t speed) {
 
 void HitachiClimate::set_swing_v_toggle_(bool on) {
   uint8_t button = get_button_();  // Get the current button value.
-  if (on)
+  if (on) {
     button = HITACHI_AC424_BUTTON_SWINGV;              // Set the button to SwingV.
-  else if (button == HITACHI_AC424_BUTTON_SWINGV)  // Asked to unset it
+  } else if (button == HITACHI_AC424_BUTTON_SWINGV) {  // Asked to unset it
     // It was set previous, so use Power as a default
     button = HITACHI_AC424_BUTTON_POWER;
+  }
   set_button_(button);
 }
 
@@ -321,9 +324,9 @@ bool HitachiClimate::on_receive(remote_base::RemoteReceiveData data) {
   for (uint8_t pos = 0; pos < HITACHI_AC424_STATE_LENGTH; pos++) {
     // Read bit
     for (int8_t bit = 0; bit < 8; bit++) {
-      if (data.expect_item(HITACHI_AC424_BIT_MARK, HITACHI_AC424_ONE_SPACE))
+      if (data.expect_item(HITACHI_AC424_BIT_MARK, HITACHI_AC424_ONE_SPACE)) {
         recv_state[pos] |= 1 << bit;
-      else if (!data.expect_item(HITACHI_AC424_BIT_MARK, HITACHI_AC424_ZERO_SPACE)) {
+      } else if (!data.expect_item(HITACHI_AC424_BIT_MARK, HITACHI_AC424_ZERO_SPACE)) {
         ESP_LOGVV(TAG, "Byte %d bit %d fail", pos, bit);
         return false;
       }

esphome/components/homeassistant/binary_sensor/homeassistant_binary_sensor.cpp

@@ -25,10 +25,11 @@ void HomeassistantBinarySensor::setup() {
             } else {
               ESP_LOGD(TAG, "'%s': Got state %s", this->entity_id_.c_str(), ONOFF(new_state));
             }
-            if (this->initial_)
+            if (this->initial_) {
               this->publish_initial_state(new_state);
-            else
+            } else {
               this->publish_state(new_state);
+            }
             break;
         }
         this->initial_ = false;

esphome/components/i2c/i2c_bus_arduino.cpp

@@ -16,10 +16,11 @@ void ArduinoI2CBus::setup() {
 
 #ifdef USE_ESP32
   static uint8_t next_bus_num = 0;
-  if (next_bus_num == 0)
+  if (next_bus_num == 0) {
     wire_ = &Wire;
-  else
+  } else {
     wire_ = new TwoWire(next_bus_num);  // NOLINT(cppcoreguidelines-owning-memory)
+  }
   next_bus_num++;
 #else
   wire_ = &Wire;  // NOLINT(cppcoreguidelines-prefer-member-initializer)
@@ -55,13 +56,14 @@ void ArduinoI2CBus::dump_config() {
       ESP_LOGI(TAG, "Found no i2c devices!");
     } else {
       for (const auto &s : scan_results_) {
-        if (s.second)
+        if (s.second) {
           ESP_LOGI(TAG, "Found i2c device at address 0x%02X", s.first);
-        else
+        } else {
           ESP_LOGE(TAG, "Unknown error at address 0x%02X", s.first);
         }
       }
     }
+  }
 }
 
 ErrorCode ArduinoI2CBus::readv(uint8_t address, ReadBuffer *buffers, size_t cnt) {

esphome/components/i2c/i2c_bus_esp_idf.cpp

@@ -65,13 +65,14 @@ void IDFI2CBus::dump_config() {
       ESP_LOGI(TAG, "Found no i2c devices!");
     } else {
       for (const auto &s : scan_results_) {
-        if (s.second)
+        if (s.second) {
           ESP_LOGI(TAG, "Found i2c device at address 0x%02X", s.first);
-        else
+        } else {
           ESP_LOGE(TAG, "Unknown error at address 0x%02X", s.first);
         }
       }
     }
+  }
 }
 
 ErrorCode IDFI2CBus::readv(uint8_t address, ReadBuffer *buffers, size_t cnt) {

esphome/components/inkplate6/inkplate.cpp

@@ -548,14 +548,15 @@ void Inkplate6::clean_fast_(uint8_t c, uint8_t rep) {
 
   eink_on_();
   uint8_t data = 0;
-  if (c == 0)  // White
+  if (c == 0) {  // White
     data = 0b10101010;
-  else if (c == 1)  // Black
+  } else if (c == 1) {  // Black
     data = 0b01010101;
-  else if (c == 2)  // Discharge
+  } else if (c == 2) {  // Discharge
     data = 0b00000000;
-  else if (c == 3)  // Skip
+  } else if (c == 3) {  // Skip
     data = 0b11111111;
+  }
 
   uint32_t send = ((data & 0b00000011) << 4) | (((data & 0b00001100) >> 2) << 18) | (((data & 0b00010000) >> 4) << 23) |
                   (((data & 0b11100000) >> 5) << 25);

esphome/components/inkplate6/inkplate.h

@@ -109,18 +109,20 @@ class Inkplate6 : public PollingComponent, public display::DisplayBuffer, public
   void pins_as_outputs_();
 
   int get_width_internal() override {
-    if (this->model_ == INKPLATE_6)
+    if (this->model_ == INKPLATE_6) {
       return 800;
-    else if (this->model_ == INKPLATE_10)
+    } else if (this->model_ == INKPLATE_10) {
       return 1200;
+    }
     return 0;
   }
 
   int get_height_internal() override {
-    if (this->model_ == INKPLATE_6)
+    if (this->model_ == INKPLATE_6) {
       return 600;
-    else if (this->model_ == INKPLATE_10)
+    } else if (this->model_ == INKPLATE_10) {
       return 825;
+    }
     return 0;
   }
 

esphome/components/light/light_call.cpp

@@ -98,10 +98,11 @@ void LightCall::perform() {
     // EFFECT
     auto effect = this->effect_;
     const char *effect_s;
-    if (effect == 0u)
+    if (effect == 0u) {
       effect_s = "None";
-    else
+    } else {
       effect_s = this->parent_->effects_[*this->effect_ - 1]->get_name().c_str();
+    }
 
     if (this->publish_) {
       ESP_LOGD(TAG, "  Effect: '%s'", effect_s);
@@ -445,9 +446,10 @@ std::set<ColorMode> LightCall::get_suitable_color_modes_() {
   };
 
   auto key = KEY(has_white, has_ct, has_cwww, has_rgb);
-  for (auto &item : lookup_table)
+  for (auto &item : lookup_table) {
     if (std::get<0>(item) == key)
       return std::get<1>(item);
+  }
 
   // This happens if there are conflicting flags given.
   return {};

esphome/components/light/light_state.cpp

@@ -145,10 +145,11 @@ void LightState::publish_state() { this->remote_values_callback_.call(); }
 
 LightOutput *LightState::get_output() const { return this->output_; }
 std::string LightState::get_effect_name() {
-  if (this->active_effect_index_ > 0)
+  if (this->active_effect_index_ > 0) {
     return this->effects_[this->active_effect_index_ - 1]->get_name();
-  else
+  } else {
     return "None";
+  }
 }
 
 void LightState::add_new_remote_values_callback(std::function<void()> &&send_callback) {
@@ -219,10 +220,11 @@ void LightState::start_effect_(uint32_t effect_index) {
   effect->start_internal();
 }
 LightEffect *LightState::get_active_effect_() {
-  if (this->active_effect_index_ == 0)
+  if (this->active_effect_index_ == 0) {
     return nullptr;
-  else
+  } else {
     return this->effects_[this->active_effect_index_ - 1];
+  }
 }
 void LightState::stop_effect_() {
   auto *effect = this->get_active_effect_();

esphome/components/max7219/max7219.cpp

@@ -143,11 +143,13 @@ void MAX7219Component::dump_config() {
 void MAX7219Component::display() {
   for (uint8_t i = 0; i < 8; i++) {
     this->enable();
-    for (uint8_t j = 0; j < this->num_chips_; j++)
+    for (uint8_t j = 0; j < this->num_chips_; j++) {
-      if (reverse_)
+      if (reverse_) {
         this->send_byte_(8 - i, buffer_[(num_chips_ - j - 1) * 8 + i]);
-      else
+      } else {
         this->send_byte_(8 - i, buffer_[j * 8 + i]);
+      }
+    }
     this->disable();
   }
 }

esphome/components/max7219digit/max7219digit.cpp

@@ -253,9 +253,10 @@ void MAX7219Component::send_char(uint8_t chip, uint8_t data) {
 void MAX7219Component::send64pixels(uint8_t chip, const uint8_t pixels[8]) {
   for (uint8_t col = 0; col < 8; col++) {  // RUN THIS LOOP 8 times until column is 7
     this->enable();                        // start sending by enabling SPI
-    for (uint8_t i = 0; i < chip; i++)     // send extra NOPs to push the pixels out to extra displays
+    for (uint8_t i = 0; i < chip; i++) {   // send extra NOPs to push the pixels out to extra displays
       this->send_byte_(MAX7219_REGISTER_NOOP,
                        MAX7219_REGISTER_NOOP);  // run this loop unit the matching chip is reached
+    }
     uint8_t b = 0;  // rotate pixels 90 degrees -- set byte to 0
     if (this->orientation_ == 0) {
       for (uint8_t i = 0; i < 8; i++) {

esphome/components/mcp23016/mcp23016.cpp

@@ -62,10 +62,11 @@ void MCP23016::update_reg_(uint8_t pin, bool pin_value, uint8_t reg_addr) {
     this->read_reg_(reg_addr, &reg_value);
   }
 
-  if (pin_value)
+  if (pin_value) {
     reg_value |= 1 << bit;
-  else
+  } else {
     reg_value &= ~(1 << bit);
+  }
 
   this->write_reg_(reg_addr, reg_value);
 

esphome/components/mcp23x08_base/mcp23x08_base.cpp

@@ -67,10 +67,11 @@ void MCP23X08Base::update_reg(uint8_t pin, bool pin_value, uint8_t reg_addr) {
     this->read_reg(reg_addr, &reg_value);
   }
 
-  if (pin_value)
+  if (pin_value) {
     reg_value |= 1 << bit;
-  else
+  } else {
     reg_value &= ~(1 << bit);
+  }
 
   this->write_reg(reg_addr, reg_value);
 

esphome/components/mcp23x17_base/mcp23x17_base.cpp

@@ -70,10 +70,11 @@ void MCP23X17Base::update_reg(uint8_t pin, bool pin_value, uint8_t reg_addr) {
     this->read_reg(reg_addr, &reg_value);
   }
 
-  if (pin_value)
+  if (pin_value) {
     reg_value |= 1 << bit;
-  else
+  } else {
     reg_value &= ~(1 << bit);
+  }
 
   this->write_reg(reg_addr, reg_value);
 

esphome/components/midea/air_conditioner.cpp

@@ -59,14 +59,16 @@ void AirConditioner::control(const ClimateCall &call) {
     ctrl.swingMode = Converters::to_midea_swing_mode(call.get_swing_mode().value());
   if (call.get_mode().has_value())
     ctrl.mode = Converters::to_midea_mode(call.get_mode().value());
-  if (call.get_preset().has_value())
+  if (call.get_preset().has_value()) {
     ctrl.preset = Converters::to_midea_preset(call.get_preset().value());
-  else if (call.get_custom_preset().has_value())
+  } else if (call.get_custom_preset().has_value()) {
     ctrl.preset = Converters::to_midea_preset(call.get_custom_preset().value());
-  if (call.get_fan_mode().has_value())
+  }
+  if (call.get_fan_mode().has_value()) {
     ctrl.fanMode = Converters::to_midea_fan_mode(call.get_fan_mode().value());
-  else if (call.get_custom_fan_mode().has_value())
+  } else if (call.get_custom_fan_mode().has_value()) {
     ctrl.fanMode = Converters::to_midea_fan_mode(call.get_custom_fan_mode().value());
+  }
   this->base_.control(ctrl);
 }
 

esphome/components/midea_ir/midea_ir.cpp

@@ -172,10 +172,11 @@ bool MideaIR::on_midea_(const MideaData &data) {
       this->target_temperature = status.get_temp();
     this->mode = status.get_mode();
     this->fan_mode = status.get_fan_mode();
-    if (status.get_sleep_preset())
+    if (status.get_sleep_preset()) {
       this->preset = climate::CLIMATE_PRESET_SLEEP;
-    else if (this->preset == climate::CLIMATE_PRESET_SLEEP)
+    } else if (this->preset == climate::CLIMATE_PRESET_SLEEP) {
       this->preset = climate::CLIMATE_PRESET_NONE;
+    }
     this->publish_state();
     return true;
   }

esphome/components/mitsubishi/mitsubishi.cpp

@@ -63,12 +63,13 @@ void MitsubishiClimate::transmit_state() {
     data->mark(MITSUBISHI_HEADER_MARK);
     data->space(MITSUBISHI_HEADER_SPACE);
     // Data
-    for (uint8_t i : remote_state)
+    for (uint8_t i : remote_state) {
       for (uint8_t j = 0; j < 8; j++) {
         data->mark(MITSUBISHI_BIT_MARK);
         bool bit = i & (1 << j);
         data->space(bit ? MITSUBISHI_ONE_SPACE : MITSUBISHI_ZERO_SPACE);
       }
+    }
     // Footer
     if (r == 0) {
       data->mark(MITSUBISHI_BIT_MARK);

esphome/components/modbus_controller/binary_sensor/modbus_binarysensor.h

@@ -19,11 +19,12 @@ class ModbusBinarySensor : public Component, public binary_sensor::BinarySensor,
     this->skip_updates = skip_updates;
     this->force_new_range = force_new_range;
 
-    if (register_type == ModbusRegisterType::COIL || register_type == ModbusRegisterType::DISCRETE_INPUT)
+    if (register_type == ModbusRegisterType::COIL || register_type == ModbusRegisterType::DISCRETE_INPUT) {
       this->register_count = offset + 1;
-    else
+    } else {
       this->register_count = 1;
     }
+  }
 
   void parse_and_publish(const std::vector<uint8_t> &data) override;
   void set_state(bool state) { this->state = state; }

esphome/components/modbus_controller/modbus_controller.h

@@ -230,11 +230,12 @@ class SensorItem {
 
   void set_custom_data(const std::vector<uint8_t> &data) { custom_data = data; }
   size_t virtual get_register_size() const {
-    if (register_type == ModbusRegisterType::COIL || register_type == ModbusRegisterType::DISCRETE_INPUT)
+    if (register_type == ModbusRegisterType::COIL || register_type == ModbusRegisterType::DISCRETE_INPUT) {
       return 1;
-    else  // if CONF_RESPONSE_BYTES is used override the default
+    } else {  // if CONF_RESPONSE_BYTES is used override the default
       return response_bytes > 0 ? response_bytes : register_count * 2;
     }
+  }
   // Override register size for modbus devices not using 1 register for one dword
   void set_register_size(uint8_t register_size) { response_bytes = register_size; }
   ModbusRegisterType register_type;

esphome/components/mqtt/mqtt_client.cpp

@@ -373,11 +373,12 @@ void MQTTClientComponent::unsubscribe(const std::string &topic) {
 
   auto it = subscriptions_.begin();
   while (it != subscriptions_.end()) {
-    if (it->topic == topic)
+    if (it->topic == topic) {
       it = subscriptions_.erase(it);
-    else
+    } else {
       ++it;
     }
+  }
 }
 
 // Publish
@@ -484,9 +485,10 @@ void MQTTClientComponent::on_message(const std::string &topic, const std::string
   // in an ISR.
   this->defer([this, topic, payload]() {
 #endif
-    for (auto &subscription : this->subscriptions_)
+    for (auto &subscription : this->subscriptions_) {
       if (topic_match(topic.c_str(), subscription.topic.c_str()))
         subscription.callback(topic, payload);
+    }
 #ifdef USE_ESP8266
   });
 #endif

esphome/components/mqtt/mqtt_climate.cpp

@@ -299,7 +299,7 @@ bool MQTTClimateComponent::publish_state_() {
 
   if (traits.get_supports_fan_modes()) {
     std::string payload;
-    if (this->device_->fan_mode.has_value())
+    if (this->device_->fan_mode.has_value()) {
       switch (this->device_->fan_mode.value()) {
         case CLIMATE_FAN_ON:
           payload = "on";
@@ -329,6 +329,7 @@ bool MQTTClimateComponent::publish_state_() {
           payload = "diffuse";
           break;
       }
+    }
     if (this->device_->custom_fan_mode.has_value())
       payload = this->device_->custom_fan_mode.value();
     if (!this->publish(this->get_fan_mode_state_topic(), payload))

esphome/components/nextion/nextion.cpp

@@ -737,9 +737,10 @@ void Nextion::process_nextion_commands_() {
     for (size_t i = 0; i < this->nextion_queue_.size(); i++) {
       NextionComponentBase *component = this->nextion_queue_[i]->component;
       if (this->nextion_queue_[i]->queue_time + this->max_q_age_ms_ < ms) {
-        if (this->nextion_queue_[i]->queue_time == 0)
+        if (this->nextion_queue_[i]->queue_time == 0) {
           ESP_LOGD(TAG, "Removing old queue type \"%s\" name \"%s\" queue_time 0",
                    component->get_queue_type_string().c_str(), component->get_variable_name().c_str());
+        }
 
         if (component->get_variable_name() == "sleep_wake") {
           this->is_sleeping_ = false;
@@ -873,9 +874,9 @@ uint16_t Nextion::recv_ret_string_(std::string &response, uint32_t timeout, bool
 
   while ((timeout == 0 && this->available()) || millis() - start <= timeout) {
     this->read_byte(&c);
-    if (c == 0xFF)
+    if (c == 0xFF) {
       nr_of_ff_bytes++;
-    else {
+    } else {
       nr_of_ff_bytes = 0;
       ff_flag = false;
     }

esphome/components/ota/ota_component.cpp

@@ -452,10 +452,11 @@ bool OTAComponent::should_enter_safe_mode(uint8_t num_attempts, uint32_t enable_
 
   bool is_manual_safe_mode = this->safe_mode_rtc_value_ == esphome::ota::OTAComponent::ENTER_SAFE_MODE_MAGIC;
 
-  if (is_manual_safe_mode)
+  if (is_manual_safe_mode) {
     ESP_LOGI(TAG, "Safe mode has been entered manually");
-  else
+  } else {
     ESP_LOGCONFIG(TAG, "There have been %u suspected unsuccessful boot attempts.", this->safe_mode_rtc_value_);
+  }
 
   if (this->safe_mode_rtc_value_ >= num_attempts || is_manual_safe_mode) {
     this->clean_rtc();

esphome/components/output/binary_output.h

@@ -32,11 +32,12 @@ class BinaryOutput {
 
   /// Enable or disable this binary output.
   virtual void set_state(bool state) {
-    if (state)
+    if (state) {
       this->turn_on();
-    else
+    } else {
       this->turn_off();
     }
+  }
 
   /// Enable this binary output.
   virtual void turn_on() {

esphome/components/output/switch/output_switch.cpp

@@ -30,10 +30,11 @@ void OutputSwitch::setup() {
       break;
   }
 
-  if (initial_state)
+  if (initial_state) {
     this->turn_on();
-  else
+  } else {
     this->turn_off();
+  }
 }
 void OutputSwitch::write_state(bool state) {
   if (state) {

esphome/components/partition/light_partition.h

@@ -78,10 +78,11 @@ class PartitionLightOutput : public light::AddressableLight {
     int32_t seg_off = index - seg.get_dst_offset();
     // offset within the src
     int32_t src_off;
-    if (seg.is_reversed())
+    if (seg.is_reversed()) {
       src_off = seg.get_src_offset() + seg.get_size() - seg_off - 1;
-    else
+    } else {
       src_off = seg.get_src_offset() + seg_off;
+    }
 
     auto view = (*seg.get_src())[src_off];
     view.raw_set_color_correction(&this->correction_);

esphome/components/pid/pid_climate.cpp

@@ -20,12 +20,13 @@ void PIDClimate::setup() {
     restore->to_call(this).perform();
   } else {
     // restore from defaults, change_away handles those for us
-    if (supports_heat_() && supports_cool_())
+    if (supports_heat_() && supports_cool_()) {
       this->mode = climate::CLIMATE_MODE_HEAT_COOL;
-    else if (supports_cool_())
+    } else if (supports_cool_()) {
       this->mode = climate::CLIMATE_MODE_COOL;
-    else if (supports_heat_())
+    } else if (supports_heat_()) {
       this->mode = climate::CLIMATE_MODE_HEAT;
+    }
     this->target_temperature = this->default_target_temperature_;
   }
 }
@@ -83,14 +84,15 @@ void PIDClimate::write_output_(float value) {
 
   // Update action variable for user feedback what's happening
   climate::ClimateAction new_action;
-  if (this->supports_cool_() && value < 0)
+  if (this->supports_cool_() && value < 0) {
     new_action = climate::CLIMATE_ACTION_COOLING;
-  else if (this->supports_heat_() && value > 0)
+  } else if (this->supports_heat_() && value > 0) {
     new_action = climate::CLIMATE_ACTION_HEATING;
-  else if (this->mode == climate::CLIMATE_MODE_OFF)
+  } else if (this->mode == climate::CLIMATE_MODE_OFF) {
     new_action = climate::CLIMATE_ACTION_OFF;
-  else
+  } else {
     new_action = climate::CLIMATE_ACTION_IDLE;
+  }
 
   if (new_action != this->action) {
     this->action = new_action;

esphome/components/pipsolar/pipsolar.cpp

@@ -908,11 +908,12 @@ uint16_t Pipsolar::crc_xmodem_update_(uint16_t crc, uint8_t data) {
   int i;
   crc = crc ^ ((uint16_t) data << 8);
   for (i = 0; i < 8; i++) {
-    if (crc & 0x8000)
+    if (crc & 0x8000) {
       crc = (crc << 1) ^ 0x1021;  //(polynomial = 0x1021)
-    else
+    } else {
       crc <<= 1;
     }
+  }
   return crc;
 }
 

esphome/components/rc522/rc522.cpp

@@ -139,10 +139,11 @@ void RC522::loop() {
 
   StatusCode status = STATUS_ERROR;  // For lint passing. TODO: refactor this
   if (awaiting_comm_) {
-    if (state_ == STATE_SELECT_SERIAL_DONE)
+    if (state_ == STATE_SELECT_SERIAL_DONE) {
       status = await_crc_();
-    else
+    } else {
       status = await_transceive_();
+    }
 
     if (status == STATUS_WAITING) {
       return;
@@ -210,11 +211,12 @@ void RC522::loop() {
     }
     case STATE_READ_SERIAL_DONE: {
       if (status != STATUS_OK || back_length_ != 3) {
-        if (status == STATUS_TIMEOUT)
+        if (status == STATUS_TIMEOUT) {
           ESP_LOGV(TAG, "STATE_READ_SERIAL_DONE -> TIMEOUT (no tag present) %d", status);
-        else
+        } else {
           ESP_LOGW(TAG, "Unexpected response. Read status is %d. Read bytes: %d (%s)", status, back_length_,
                    format_buffer(buffer_, 9).c_str());
+        }
 
         state_ = STATE_DONE;
         uid_idx_ = 0;
@@ -476,9 +478,9 @@ RC522::StatusCode RC522::await_crc_() {
 
 bool RC522BinarySensor::process(std::vector<uint8_t> &data) {
   bool result = true;
-  if (data.size() != this->uid_.size())
+  if (data.size() != this->uid_.size()) {
     result = false;
-  else {
+  } else {
     for (size_t i = 0; i < data.size(); i++) {
       if (data[i] != this->uid_[i]) {
         result = false;

esphome/components/remote_base/coolix_protocol.cpp

@@ -51,11 +51,12 @@ static bool decode_data(RemoteReceiveData &src, CoolixData &dst) {
     for (uint32_t mask = 1 << 7; mask; mask >>= 1) {
       if (!src.expect_mark(BIT_MARK_US))
         return false;
-      if (src.expect_space(BIT_ONE_SPACE_US))
+      if (src.expect_space(BIT_ONE_SPACE_US)) {
         data |= mask;
-      else if (!src.expect_space(BIT_ZERO_SPACE_US))
+      } else if (!src.expect_space(BIT_ZERO_SPACE_US)) {
         return false;
       }
+    }
     // Check for inverse byte
     for (uint32_t mask = 1 << 7; mask; mask >>= 1) {
       if (!src.expect_item(BIT_MARK_US, (data & mask) ? BIT_ZERO_SPACE_US : BIT_ONE_SPACE_US))

esphome/components/remote_base/dish_protocol.cpp

@@ -24,19 +24,21 @@ void DishProtocol::encode(RemoteTransmitData *dst, const DishData &data) {
   for (uint i = 0; i < 4; i++) {
     // COMMAND (function, in MSB)
     for (uint8_t mask = 1UL << 5; mask; mask >>= 1) {
-      if (data.command & mask)
+      if (data.command & mask) {
         dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-      else
+      } else {
         dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
       }
+    }
 
     // ADDRESS (unit code, in LSB)
     for (uint8_t mask = 1UL; mask < 1UL << 4; mask <<= 1) {
-      if ((data.address - 1) & mask)
+      if ((data.address - 1) & mask) {
         dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-      else
+      } else {
         dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
       }
+    }
     // PADDING
     for (uint j = 0; j < 6; j++)
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);

esphome/components/remote_base/jvc_protocol.cpp

@@ -20,11 +20,12 @@ void JVCProtocol::encode(RemoteTransmitData *dst, const JVCData &data) {
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
 
   for (uint32_t mask = 1UL << (NBITS - 1); mask != 0; mask >>= 1) {
-    if (data.data & mask)
+    if (data.data & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   dst->mark(BIT_HIGH_US);
 }

esphome/components/remote_base/lg_protocol.cpp

@@ -19,11 +19,12 @@ void LGProtocol::encode(RemoteTransmitData *dst, const LGData &data) {
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
 
   for (uint32_t mask = 1UL << (data.nbits - 1); mask != 0; mask >>= 1) {
-    if (data.data & mask)
+    if (data.data & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   dst->mark(BIT_HIGH_US);
 }

esphome/components/remote_base/midea_protocol.cpp

@@ -31,14 +31,16 @@ void MideaProtocol::encode(RemoteTransmitData *dst, const MideaData &src) {
   dst->set_carrier_frequency(38000);
   dst->reserve(2 + 48 * 2 + 2 + 2 + 48 * 2 + 1);
   dst->item(HEADER_MARK_US, HEADER_SPACE_US);
-  for (unsigned idx = 0; idx < 6; idx++)
+  for (unsigned idx = 0; idx < 6; idx++) {
     for (uint8_t mask = 1 << 7; mask; mask >>= 1)
       dst->item(BIT_MARK_US, (src[idx] & mask) ? BIT_ONE_SPACE_US : BIT_ZERO_SPACE_US);
+  }
   dst->item(FOOTER_MARK_US, FOOTER_SPACE_US);
   dst->item(HEADER_MARK_US, HEADER_SPACE_US);
-  for (unsigned idx = 0; idx < 6; idx++)
+  for (unsigned idx = 0; idx < 6; idx++) {
     for (uint8_t mask = 1 << 7; mask; mask >>= 1)
       dst->item(BIT_MARK_US, (src[idx] & mask) ? BIT_ZERO_SPACE_US : BIT_ONE_SPACE_US);
+  }
   dst->mark(FOOTER_MARK_US);
 }
 
@@ -48,11 +50,12 @@ static bool decode_data(RemoteReceiveData &src, MideaData &dst) {
     for (uint8_t mask = 1 << 7; mask; mask >>= 1) {
       if (!src.expect_mark(BIT_MARK_US))
         return false;
-      if (src.expect_space(BIT_ONE_SPACE_US))
+      if (src.expect_space(BIT_ONE_SPACE_US)) {
         data |= mask;
-      else if (!src.expect_space(BIT_ZERO_SPACE_US))
+      } else if (!src.expect_space(BIT_ZERO_SPACE_US)) {
         return false;
       }
+    }
     dst[idx] = data;
   }
   return true;

esphome/components/remote_base/nec_protocol.cpp

@@ -18,18 +18,20 @@ void NECProtocol::encode(RemoteTransmitData *dst, const NECData &data) {
 
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
   for (uint16_t mask = 1; mask; mask <<= 1) {
-    if (data.address & mask)
+    if (data.address & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   for (uint16_t mask = 1; mask; mask <<= 1) {
-    if (data.command & mask)
+    if (data.command & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   dst->mark(BIT_HIGH_US);
 }

esphome/components/remote_base/nexa_protocol.cpp

@@ -41,45 +41,50 @@ void NexaProtocol::encode(RemoteTransmitData *dst, const NexaData &data) {
 
   // Device (26 bits)
   for (int16_t i = 26 - 1; i >= 0; i--) {
-    if (data.device & (1 << i))
+    if (data.device & (1 << i)) {
       this->one(dst);
-    else
+    } else {
       this->zero(dst);
     }
+  }
 
   // Group (1 bit)
-  if (data.group != 0)
+  if (data.group != 0) {
     this->one(dst);
-  else
+  } else {
     this->zero(dst);
+  }
 
   // State (1 bit)
   if (data.state == 2) {
     // Special case for dimmers...send 00 as state
     dst->item(TX_BIT_HIGH_US, TX_BIT_ZERO_LOW_US);
     dst->item(TX_BIT_HIGH_US, TX_BIT_ZERO_LOW_US);
-  } else if (data.state == 1)
+  } else if (data.state == 1) {
     this->one(dst);
-  else
+  } else {
     this->zero(dst);
+  }
 
   // Channel (4 bits)
   for (int16_t i = 4 - 1; i >= 0; i--) {
-    if (data.channel & (1 << i))
+    if (data.channel & (1 << i)) {
       this->one(dst);
-    else
+    } else {
       this->zero(dst);
     }
+  }
 
   // Level (4 bits)
   if (data.state == 2) {
     for (int16_t i = 4 - 1; i >= 0; i--) {
-      if (data.level & (1 << i))
+      if (data.level & (1 << i)) {
         this->one(dst);
-      else
+      } else {
         this->zero(dst);
       }
     }
+  }
 
   // Send finishing Zero
   dst->item(TX_BIT_HIGH_US, TX_BIT_ZERO_LOW_US);

esphome/components/remote_base/panasonic_protocol.cpp

@@ -19,18 +19,20 @@ void PanasonicProtocol::encode(RemoteTransmitData *dst, const PanasonicData &dat
 
   uint32_t mask;
   for (mask = 1UL << 15; mask != 0; mask >>= 1) {
-    if (data.address & mask)
+    if (data.address & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   for (mask = 1UL << 31; mask != 0; mask >>= 1) {
-    if (data.command & mask)
+    if (data.command & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
   dst->mark(BIT_HIGH_US);
 }
 optional<PanasonicData> PanasonicProtocol::decode(RemoteReceiveData src) {

esphome/components/remote_base/pioneer_protocol.cpp

@@ -42,27 +42,30 @@ void PioneerProtocol::encode(RemoteTransmitData *dst, const PioneerData &data) {
   command1 = (command1 << 8) | ((~command1) & 0xff);
   command2 = (command2 << 8) | ((~command2) & 0xff);
 
-  if (data.rc_code_2 == 0)
+  if (data.rc_code_2 == 0) {
     dst->reserve(68);
-  else
+  } else {
     dst->reserve((68 * 2) + 1);
+  }
 
   dst->set_carrier_frequency(40000);
 
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
   for (uint32_t mask = 1UL << 15; mask; mask >>= 1) {
-    if (address1 & mask)
+    if (address1 & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   for (uint32_t mask = 1UL << 15; mask; mask >>= 1) {
-    if (command1 & mask)
+    if (command1 & mask) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   dst->mark(BIT_HIGH_US);
 
@@ -70,18 +73,20 @@ void PioneerProtocol::encode(RemoteTransmitData *dst, const PioneerData &data) {
     dst->space(TRAILER_SPACE_US);
     dst->item(HEADER_HIGH_US, HEADER_LOW_US);
     for (uint32_t mask = 1UL << 15; mask; mask >>= 1) {
-      if (address2 & mask)
+      if (address2 & mask) {
         dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-      else
+      } else {
         dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
       }
+    }
 
     for (uint32_t mask = 1UL << 15; mask; mask >>= 1) {
-      if (command2 & mask)
+      if (command2 & mask) {
         dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-      else
+      } else {
         dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
       }
+    }
 
     dst->mark(BIT_HIGH_US);
   }
@@ -140,10 +145,11 @@ optional<PioneerData> PioneerProtocol::decode(RemoteReceiveData src) {
   return data;
 }
 void PioneerProtocol::dump(const PioneerData &data) {
-  if (data.rc_code_2 == 0)
+  if (data.rc_code_2 == 0) {
     ESP_LOGD(TAG, "Received Pioneer: rc_code_X=0x%04X", data.rc_code_1);
-  else
+  } else {
     ESP_LOGD(TAG, "Received Pioneer: rc_code_1=0x%04X, rc_code_2=0x%04X", data.rc_code_1, data.rc_code_2);
+  }
 }
 
 }  // namespace remote_base

esphome/components/remote_base/raw_protocol.h

@@ -50,11 +50,12 @@ template<typename... Ts> class RawAction : public RemoteTransmitterActionBase<Ts
     if (this->code_static_ != nullptr) {
       for (size_t i = 0; i < this->code_static_len_; i++) {
         auto val = this->code_static_[i];
-        if (val < 0)
+        if (val < 0) {
           dst->space(static_cast<uint32_t>(-val));
-        else
+        } else {
           dst->mark(static_cast<uint32_t>(val));
         }
+      }
     } else {
       dst->set_data(this->code_func_(x...));
     }

esphome/components/remote_base/rc_switch_protocol.cpp

@@ -57,11 +57,12 @@ void RCSwitchBase::transmit(RemoteTransmitData *dst, uint64_t code, uint8_t len)
   dst->set_carrier_frequency(0);
   this->sync(dst);
   for (int16_t i = len - 1; i >= 0; i--) {
-    if (code & ((uint64_t) 1 << i))
+    if (code & ((uint64_t) 1 << i)) {
       this->one(dst);
-    else
+    } else {
       this->zero(dst);
     }
+  }
 }
 
 bool RCSwitchBase::expect_one(RemoteReceiveData &src) const {
@@ -148,11 +149,12 @@ void RCSwitchBase::simple_code_to_tristate(uint16_t code, uint8_t nbits, uint64_
   *out_code = 0;
   for (int8_t i = nbits - 1; i >= 0; i--) {
     *out_code <<= 2;
-    if (code & (1 << i))
+    if (code & (1 << i)) {
       *out_code |= 0b01;
-    else
+    } else {
       *out_code |= 0b00;
     }
+  }
 }
 void RCSwitchBase::type_a_code(uint8_t switch_group, uint8_t switch_device, bool state, uint64_t *out_code,
                                uint8_t *out_nbits) {

esphome/components/remote_base/samsung_protocol.cpp

@@ -22,11 +22,12 @@ void SamsungProtocol::encode(RemoteTransmitData *dst, const SamsungData &data) {
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
 
   for (uint8_t bit = data.nbits; bit > 0; bit--) {
-    if ((data.data >> (bit - 1)) & 1)
+    if ((data.data >> (bit - 1)) & 1) {
       dst->item(BIT_HIGH_US, BIT_ONE_LOW_US);
-    else
+    } else {
       dst->item(BIT_HIGH_US, BIT_ZERO_LOW_US);
     }
+  }
 
   dst->item(FOOTER_HIGH_US, FOOTER_LOW_US);
 }

esphome/components/remote_base/sony_protocol.cpp

@@ -19,11 +19,12 @@ void SonyProtocol::encode(RemoteTransmitData *dst, const SonyData &data) {
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
 
   for (uint32_t mask = 1UL << (data.nbits - 1); mask != 0; mask >>= 1) {
-    if (data.data & mask)
+    if (data.data & mask) {
       dst->item(BIT_ONE_HIGH_US, BIT_LOW_US);
-    else
+    } else {
       dst->item(BIT_ZERO_HIGH_US, BIT_LOW_US);
     }
+  }
 }
 optional<SonyData> SonyProtocol::decode(RemoteReceiveData src) {
   SonyData out{

esphome/components/remote_base/toshiba_ac_protocol.cpp

@@ -24,11 +24,12 @@ void ToshibaAcProtocol::encode(RemoteTransmitData *dst, const ToshibaAcData &dat
     dst->item(HEADER_HIGH_US, HEADER_LOW_US);
     for (uint8_t bit = 48; bit > 0; bit--) {
       dst->mark(BIT_HIGH_US);
-      if ((data.rc_code_1 >> (bit - 1)) & 1)
+      if ((data.rc_code_1 >> (bit - 1)) & 1) {
         dst->space(BIT_ONE_LOW_US);
-      else
+      } else {
         dst->space(BIT_ZERO_LOW_US);
       }
+    }
     dst->item(FOOTER_HIGH_US, FOOTER_LOW_US);
   }
 
@@ -36,11 +37,12 @@ void ToshibaAcProtocol::encode(RemoteTransmitData *dst, const ToshibaAcData &dat
     dst->item(HEADER_HIGH_US, HEADER_LOW_US);
     for (uint8_t bit = 48; bit > 0; bit--) {
       dst->mark(BIT_HIGH_US);
-      if ((data.rc_code_2 >> (bit - 1)) & 1)
+      if ((data.rc_code_2 >> (bit - 1)) & 1) {
         dst->space(BIT_ONE_LOW_US);
-      else
+      } else {
         dst->space(BIT_ZERO_LOW_US);
       }
+    }
     dst->item(FOOTER_HIGH_US, FOOTER_LOW_US);
   }
 }
@@ -102,10 +104,11 @@ optional<ToshibaAcData> ToshibaAcProtocol::decode(RemoteReceiveData src) {
 }
 
 void ToshibaAcProtocol::dump(const ToshibaAcData &data) {
-  if (data.rc_code_2 != 0)
+  if (data.rc_code_2 != 0) {
     ESP_LOGD(TAG, "Received Toshiba AC: rc_code_1=0x%" PRIX64 ", rc_code_2=0x%" PRIX64, data.rc_code_1, data.rc_code_2);
-  else
+  } else {
     ESP_LOGD(TAG, "Received Toshiba AC: rc_code_1=0x%" PRIX64, data.rc_code_1);
+  }
 }
 
 }  // namespace remote_base

esphome/components/remote_receiver/remote_receiver_esp8266.cpp

@@ -79,9 +79,10 @@ void RemoteReceiverComponent::loop() {
   if (dist <= 1)
     return;
   const uint32_t now = micros();
-  if (now - s.buffer[write_at] < this->idle_us_)
+  if (now - s.buffer[write_at] < this->idle_us_) {
     // The last change was fewer than the configured idle time ago.
     return;
+  }
 
   ESP_LOGVV(TAG, "read_at=%u write_at=%u dist=%u now=%u end=%u", s.buffer_read_at, write_at, dist, now,
             s.buffer[write_at]);

esphome/components/remote_transmitter/remote_transmitter_esp8266.cpp

@@ -35,10 +35,11 @@ void RemoteTransmitterComponent::calculate_on_off_time_(uint32_t carrier_frequen
 
 void RemoteTransmitterComponent::await_target_time_() {
   const uint32_t current_time = micros();
-  if (this->target_time_ == 0)
+  if (this->target_time_ == 0) {
     this->target_time_ = current_time;
-  else if (this->target_time_ > current_time)
+  } else if (this->target_time_ > current_time) {
     delayMicroseconds(this->target_time_ - current_time);
+  }
 }
 
 void RemoteTransmitterComponent::mark_(uint32_t on_time, uint32_t off_time, uint32_t usec) {

esphome/components/resistance/resistance_sensor.cpp

@@ -20,16 +20,18 @@ void ResistanceSensor::process_(float value) {
   float res = 0;
   switch (this->configuration_) {
     case UPSTREAM:
-      if (value == 0.0f)
+      if (value == 0.0f) {
         res = NAN;
-      else
+      } else {
         res = (this->reference_voltage_ - value) / value;
+      }
       break;
     case DOWNSTREAM:
-      if (value == this->reference_voltage_)
+      if (value == this->reference_voltage_) {
         res = NAN;
-      else
+      } else {
         res = value / (this->reference_voltage_ - value);
+      }
       break;
   }
 

esphome/components/rtttl/rtttl.cpp

@@ -104,10 +104,11 @@ void Rtttl::loop() {
   // first, get note duration, if available
   uint8_t num = this->get_integer_();
 
-  if (num)
+  if (num) {
     note_duration_ = wholenote_ / num;
-  else
+  } else {
     note_duration_ = wholenote_ / default_duration_;  // we will need to check if we are a dotted note after
+  }
 
   uint8_t note;
 

esphome/components/scd30/scd30.cpp

@@ -229,19 +229,21 @@ uint8_t SCD30Component::sht_crc_(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/scd4x/scd4x.cpp

@@ -233,19 +233,21 @@ uint8_t SCD4XComponent::sht_crc_(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/sdp3x/sdp3x.cpp

@@ -138,12 +138,13 @@ bool SDP3XComponent::check_crc_(const uint8_t data[], uint8_t size, uint8_t chec
   for (int i = 0; i < size; i++) {
     crc ^= (data[i]);
     for (uint8_t bit = 8; bit > 0; --bit) {
-      if (crc & 0x80)
+      if (crc & 0x80) {
         crc = (crc << 1) ^ 0x31;
-      else
+      } else {
         crc = (crc << 1);
       }
     }
+  }
 
   // verify checksum
   return (crc == checksum);

esphome/components/sensor/filter.cpp

@@ -176,10 +176,11 @@ optional<float> SlidingWindowMovingAverageFilter::new_value(float value) {
     this->sum_ += value;
   }
   float average;
-  if (this->queue_.empty())
+  if (this->queue_.empty()) {
     average = 0.0f;
-  else
+  } else {
     average = this->sum_ / this->queue_.size();
+  }
   ESP_LOGVV(TAG, "SlidingWindowMovingAverageFilter(%p)::new_value(%f) -> %f", this, value, average);
 
   if (++this->send_at_ % this->send_every_ == 0) {
@@ -203,10 +204,11 @@ ExponentialMovingAverageFilter::ExponentialMovingAverageFilter(float alpha, size
     : send_every_(send_every), send_at_(send_every - 1), alpha_(alpha) {}
 optional<float> ExponentialMovingAverageFilter::new_value(float value) {
   if (!std::isnan(value)) {
-    if (this->first_value_)
+    if (this->first_value_) {
       this->accumulator_ = value;
-    else
+    } else {
       this->accumulator_ = (this->alpha_ * value) + (1.0f - this->alpha_) * this->accumulator_;
+    }
     this->first_value_ = false;
   }
 
@@ -274,20 +276,22 @@ FilterOutValueFilter::FilterOutValueFilter(float value_to_filter_out) : value_to
 
 optional<float> FilterOutValueFilter::new_value(float value) {
   if (std::isnan(this->value_to_filter_out_)) {
-    if (std::isnan(value))
+    if (std::isnan(value)) {
       return {};
-    else
+    } else {
       return value;
+    }
   } else {
     int8_t accuracy = this->parent_->get_accuracy_decimals();
     float accuracy_mult = powf(10.0f, accuracy);
     float rounded_filter_out = roundf(accuracy_mult * this->value_to_filter_out_);
     float rounded_value = roundf(accuracy_mult * value);
-    if (rounded_filter_out == rounded_value)
+    if (rounded_filter_out == rounded_value) {
       return {};
-    else
+    } else {
       return value;
     }
+  }
 }
 
 // ThrottleFilter

esphome/components/servo/servo.cpp

@@ -65,10 +65,11 @@ void Servo::write(float value) {
 void Servo::internal_write(float value) {
   value = clamp(value, -1.0f, 1.0f);
   float level;
-  if (value < 0.0)
+  if (value < 0.0) {
     level = lerp(-value, this->idle_level_, this->min_level_);
-  else
+  } else {
     level = lerp(value, this->idle_level_, this->max_level_);
+  }
   this->output_->set_level(level);
   if (this->target_value_ == this->current_value_) {
     this->save_level_(level);

esphome/components/sgp30/sgp30.cpp

@@ -220,9 +220,10 @@ void SGP30Component::write_iaq_baseline_(uint16_t eco2_baseline, uint16_t tvoc_b
   data[6] = sht_crc_(data[4], data[5]);
   if (!this->write_bytes(SGP30_CMD_SET_IAQ_BASELINE >> 8, data, 7)) {
     ESP_LOGE(TAG, "Error applying eCO2 baseline: 0x%04X, TVOC baseline: 0x%04X", eco2_baseline, tvoc_baseline);
-  } else
+  } else {
     ESP_LOGI(TAG, "Initial baselines applied successfully! eCO2 baseline: 0x%04X, TVOC baseline: 0x%04X", eco2_baseline,
              tvoc_baseline);
+  }
 }
 
 void SGP30Component::dump_config() {
@@ -315,19 +316,21 @@ uint8_t SGP30Component::sht_crc_(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/sgp40/sgp40.cpp

@@ -229,12 +229,13 @@ uint8_t SGP40Component::generate_crc_(const uint8_t *data, uint8_t datalen) {
   for (uint8_t i = 0; i < datalen; i++) {
     crc ^= data[i];
     for (uint8_t b = 0; b < 8; b++) {
-      if (crc & 0x80)
+      if (crc & 0x80) {
         crc = (crc << 1) ^ SGP40_CRC8_POLYNOMIAL;
-      else
+      } else {
         crc <<= 1;
       }
     }
+  }
   return crc;
 }
 
@@ -303,19 +304,21 @@ uint8_t SGP40Component::sht_crc_(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/sht3xd/sht3xd.cpp

@@ -82,19 +82,21 @@ uint8_t sht_crc(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/shtcx/shtcx.cpp

@@ -112,19 +112,21 @@ uint8_t sht_crc(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/socket/bsd_sockets_impl.cpp

@@ -88,9 +88,10 @@ class BSDSocketImpl : public Socket {
     for (int i = 0; i < iovcnt; i++) {
       ssize_t err = this->read(reinterpret_cast<uint8_t *>(iov[i].iov_base), iov[i].iov_len);
       if (err == -1) {
-        if (ret != 0)
+        if (ret != 0) {
           // if we already read some don't return an error
           break;
+        }
         return err;
       }
       ret += err;
@@ -115,9 +116,10 @@ class BSDSocketImpl : public Socket {
       ssize_t err =
           this->send(reinterpret_cast<uint8_t *>(iov[i].iov_base), iov[i].iov_len, i == iovcnt - 1 ? 0 : MSG_MORE);
       if (err == -1) {
-        if (ret != 0)
+        if (ret != 0) {
           // if we already wrote some don't return an error
           break;
+        }
         return err;
       }
       ret += err;

esphome/components/spi/spi.cpp

@@ -129,10 +129,11 @@ uint8_t HOT SPIComponent::transfer_(uint8_t data) {
 
   for (uint8_t i = 0; i < 8; i++) {
     uint8_t shift;
-    if (BIT_ORDER == BIT_ORDER_MSB_FIRST)
+    if (BIT_ORDER == BIT_ORDER_MSB_FIRST) {
       shift = 7 - i;
-    else
+    } else {
       shift = i;
+    }
 
     if (CLOCK_PHASE == CLOCK_PHASE_LEADING) {
       // sampling on leading edge

esphome/components/sps30/sps30.cpp

@@ -216,19 +216,21 @@ uint8_t SPS30Component::sht_crc_(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/ssd1306_base/ssd1306_base.cpp

@@ -66,11 +66,12 @@ void SSD1306::setup() {
   if (!this->is_ssd1305_()) {
     // Enable charge pump (0x8D)
     this->command(SSD1306_COMMAND_CHARGE_PUMP);
-    if (this->external_vcc_)
+    if (this->external_vcc_) {
       this->command(0x10);
-    else
+    } else {
       this->command(0x14);
     }
+  }
 
   // Set addressing mode to horizontal (0x20)
   this->command(SSD1306_COMMAND_MEMORY_MODE);
@@ -105,10 +106,11 @@ void SSD1306::setup() {
 
   // Pre-charge period (0xD9)
   this->command(SSD1306_COMMAND_SET_PRE_CHARGE);
-  if (this->external_vcc_)
+  if (this->external_vcc_) {
     this->command(0x22);
-  else
+  } else {
     this->command(0xF1);
+  }
 
   // Set V_COM (0xDB)
   this->command(SSD1306_COMMAND_SET_VCOM_DETECT);

esphome/components/ssd1325_base/ssd1325_base.cpp

@@ -51,24 +51,27 @@ void SSD1325::setup() {
   this->command(SSD1325_SETCLOCK);      // set osc division
   this->command(0xF1);                  // 145
   this->command(SSD1325_SETMULTIPLEX);  // multiplex ratio
-  if (this->model_ == SSD1327_MODEL_128_128)
+  if (this->model_ == SSD1327_MODEL_128_128) {
     this->command(0x7f);  // duty = height - 1
-  else
+  } else {
     this->command(0x3f);  // duty = 1/64
+  }
   this->command(SSD1325_SETOFFSET);  // set display offset
-  if (this->model_ == SSD1327_MODEL_128_128)
+  if (this->model_ == SSD1327_MODEL_128_128) {
     this->command(0x00);  // 0
-  else
+  } else {
     this->command(0x4C);  // 76
+  }
   this->command(SSD1325_SETSTARTLINE);  // set start line
   this->command(0x00);                  // ...
   this->command(SSD1325_MASTERCONFIG);  // Set Master Config DC/DC Converter
   this->command(0x02);
   this->command(SSD1325_SETREMAP);  // set segment remapping
-  if (this->model_ == SSD1327_MODEL_128_128)
+  if (this->model_ == SSD1327_MODEL_128_128) {
     this->command(0x53);  //  COM bottom-up, split odd/even, enable column and nibble remapping
-  else
+  } else {
     this->command(0x50);  // COM bottom-up, split odd/even
+  }
   this->command(SSD1325_SETCURRENT + 0x2);  // Set Full Current Range
   this->command(SSD1325_SETGRAYTABLE);
   // gamma ~2.2
@@ -122,10 +125,11 @@ void SSD1325::display() {
   this->command(0x3F);                // set column end address
   this->command(SSD1325_SETROWADDR);  // set row address
   this->command(0x00);                // set row start address
-  if (this->model_ == SSD1327_MODEL_128_128)
+  if (this->model_ == SSD1327_MODEL_128_128) {
     this->command(127);  // set last row
-  else
+  } else {
     this->command(63);  // set last row
+  }
 
   this->write_display_data();
 }
@@ -135,12 +139,13 @@ void SSD1325::update() {
 }
 void SSD1325::set_brightness(float brightness) {
   // validation
-  if (brightness > 1)
+  if (brightness > 1) {
     this->brightness_ = 1.0;
-  else if (brightness < 0)
+  } else if (brightness < 0) {
     this->brightness_ = 0;
-  else
+  } else {
     this->brightness_ = brightness;
+  }
   // now write the new brightness level to the display
   this->command(SSD1325_SETCONTRAST);
   this->command(int(SSD1325_MAX_CONTRAST * (this->brightness_)));

esphome/components/ssd1331_base/ssd1331_base.cpp

@@ -129,12 +129,13 @@ void HOT SSD1331::draw_absolute_pixel_internal(int x, int y, Color color) {
 }
 void SSD1331::fill(Color color) {
   const uint32_t color565 = display::ColorUtil::color_to_565(color);
-  for (uint32_t i = 0; i < this->get_buffer_length_(); i++)
+  for (uint32_t i = 0; i < this->get_buffer_length_(); i++) {
     if (i & 1) {
       this->buffer_[i] = color565 & 0xff;
     } else {
       this->buffer_[i] = (color565 >> 8) & 0xff;
     }
+  }
 }
 void SSD1331::init_reset_() {
   if (this->reset_pin_ != nullptr) {

esphome/components/ssd1351_base/ssd1351_base.cpp

@@ -105,12 +105,13 @@ void SSD1351::update() {
 }
 void SSD1351::set_brightness(float brightness) {
   // validation
-  if (brightness > 1)
+  if (brightness > 1) {
     this->brightness_ = 1.0;
-  else if (brightness < 0)
+  } else if (brightness < 0) {
     this->brightness_ = 0;
-  else
+  } else {
     this->brightness_ = brightness;
+  }
   // now write the new brightness level to the display
   this->command(SSD1351_CONTRASTMASTER);
   this->data(int(SSD1351_MAX_CONTRAST * (this->brightness_)));
@@ -157,12 +158,13 @@ void HOT SSD1351::draw_absolute_pixel_internal(int x, int y, Color color) {
 }
 void SSD1351::fill(Color color) {
   const uint32_t color565 = display::ColorUtil::color_to_565(color);
-  for (uint32_t i = 0; i < this->get_buffer_length_(); i++)
+  for (uint32_t i = 0; i < this->get_buffer_length_(); i++) {
     if (i & 1) {
       this->buffer_[i] = color565 & 0xff;
     } else {
       this->buffer_[i] = (color565 >> 8) & 0xff;
     }
+  }
 }
 void SSD1351::init_reset_() {
   if (this->reset_pin_ != nullptr) {

esphome/components/sts3x/sts3x.cpp

@@ -78,19 +78,21 @@ uint8_t sts3x_crc(uint8_t data1, uint8_t data2) {
 
   crc ^= data1;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   crc ^= data2;
   for (bit = 8; bit > 0; --bit) {
-    if (crc & 0x80)
+    if (crc & 0x80) {
       crc = (crc << 1) ^ 0x131;
-    else
+    } else {
       crc = (crc << 1);
     }
+  }
 
   return crc;
 }

esphome/components/sun/sun.h

@@ -110,11 +110,12 @@ template<typename... Ts> class SunCondition : public Condition<Ts...>, public Pa
   bool check(Ts... x) override {
     double elevation = this->elevation_.value(x...);
     double current = this->parent_->elevation();
-    if (this->above_)
+    if (this->above_) {
       return current > elevation;
-    else
+    } else {
       return current < elevation;
     }
+  }
 
  protected:
   bool above_;