Merge pull request #2044 from esphome/bump-1.20.0b5

1.20.0b5

esphome/components/adc/adc_sensor.cpp

@@ -11,7 +11,30 @@ namespace adc {
 static const char *const TAG = "adc";
 
 #ifdef ARDUINO_ARCH_ESP32
-void ADCSensor::set_attenuation(adc_attenuation_t attenuation) { this->attenuation_ = attenuation; }
+void ADCSensor::set_attenuation(adc_atten_t attenuation) { this->attenuation_ = attenuation; }
+
+inline adc1_channel_t gpio_to_adc1(uint8_t pin) {
+  switch (pin) {
+    case 36:
+      return ADC1_CHANNEL_0;
+    case 37:
+      return ADC1_CHANNEL_1;
+    case 38:
+      return ADC1_CHANNEL_2;
+    case 39:
+      return ADC1_CHANNEL_3;
+    case 32:
+      return ADC1_CHANNEL_4;
+    case 33:
+      return ADC1_CHANNEL_5;
+    case 34:
+      return ADC1_CHANNEL_6;
+    case 35:
+      return ADC1_CHANNEL_7;
+    default:
+      return ADC1_CHANNEL_MAX;
+  }
+}
 #endif
 
 void ADCSensor::setup() {
@@ -21,7 +44,9 @@ void ADCSensor::setup() {
 #endif
 
 #ifdef ARDUINO_ARCH_ESP32
-  analogSetPinAttenuation(this->pin_, this->attenuation_);
+  adc1_config_channel_atten(gpio_to_adc1(pin_), attenuation_);
+  adc1_config_width(ADC_WIDTH_BIT_12);
+  adc_gpio_init(ADC_UNIT_1, (adc_channel_t) gpio_to_adc1(pin_));
 #endif
 }
 void ADCSensor::dump_config() {
@@ -36,18 +61,20 @@ void ADCSensor::dump_config() {
 #ifdef ARDUINO_ARCH_ESP32
   ESP_LOGCONFIG(TAG, "  Pin: %u", this->pin_);
   switch (this->attenuation_) {
-    case ADC_0db:
+    case ADC_ATTEN_DB_0:
       ESP_LOGCONFIG(TAG, " Attenuation: 0db (max 1.1V)");
       break;
-    case ADC_2_5db:
+    case ADC_ATTEN_DB_2_5:
       ESP_LOGCONFIG(TAG, " Attenuation: 2.5db (max 1.5V)");
       break;
-    case ADC_6db:
+    case ADC_ATTEN_DB_6:
       ESP_LOGCONFIG(TAG, " Attenuation: 6db (max 2.2V)");
       break;
-    case ADC_11db:
+    case ADC_ATTEN_DB_11:
       ESP_LOGCONFIG(TAG, " Attenuation: 11db (max 3.9V)");
       break;
+    default:  // This is to satisfy the unused ADC_ATTEN_MAX
+      break;
   }
 #endif
   LOG_UPDATE_INTERVAL(this);
@@ -60,20 +87,23 @@ void ADCSensor::update() {
 }
 float ADCSensor::sample() {
 #ifdef ARDUINO_ARCH_ESP32
-  float value_v = analogRead(this->pin_) / 4095.0f;  // NOLINT
+  int raw = adc1_get_raw(gpio_to_adc1(pin_));
+  float value_v = raw / 4095.0f;
   switch (this->attenuation_) {
-    case ADC_0db:
+    case ADC_ATTEN_DB_0:
       value_v *= 1.1;
       break;
-    case ADC_2_5db:
+    case ADC_ATTEN_DB_2_5:
       value_v *= 1.5;
       break;
-    case ADC_6db:
+    case ADC_ATTEN_DB_6:
       value_v *= 2.2;
       break;
-    case ADC_11db:
+    case ADC_ATTEN_DB_11:
       value_v *= 3.9;
       break;
+    default:  // This is to satisfy the unused ADC_ATTEN_MAX
+      break;
   }
   return value_v;
 #endif

esphome/components/adc/adc_sensor.h

@@ -6,6 +6,10 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/voltage_sampler/voltage_sampler.h"
 
+#ifdef ARDUINO_ARCH_ESP32
+#include "driver/adc.h"
+#endif
+
 namespace esphome {
 namespace adc {
 
@@ -13,7 +17,7 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
  public:
 #ifdef ARDUINO_ARCH_ESP32
   /// Set the attenuation for this pin. Only available on the ESP32.
-  void set_attenuation(adc_attenuation_t attenuation);
+  void set_attenuation(adc_atten_t attenuation);
 #endif
 
   /// Update adc values.
@@ -34,7 +38,7 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   uint8_t pin_;
 
 #ifdef ARDUINO_ARCH_ESP32
-  adc_attenuation_t attenuation_{ADC_0db};
+  adc_atten_t attenuation_{ADC_ATTEN_DB_0};
 #endif
 };
 

esphome/components/adc/sensor.py

@@ -16,10 +16,10 @@ from esphome.const import (
 AUTO_LOAD = ["voltage_sampler"]
 
 ATTENUATION_MODES = {
-    "0db": cg.global_ns.ADC_0db,
+    "0db": cg.global_ns.ADC_ATTEN_DB_0,
-    "2.5db": cg.global_ns.ADC_2_5db,
+    "2.5db": cg.global_ns.ADC_ATTEN_DB_2_5,
-    "6db": cg.global_ns.ADC_6db,
+    "6db": cg.global_ns.ADC_ATTEN_DB_6,
-    "11db": cg.global_ns.ADC_11db,
+    "11db": cg.global_ns.ADC_ATTEN_DB_11,
 }
 
 

esphome/components/ads1115/ads1115.cpp

@@ -107,9 +107,13 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
     }
     this->prev_config_ = config;
 
-    // about 1.6 ms with 860 samples per second
+    // about 1.2 ms with 860 samples per second
     delay(2);
 
+    // in continuous mode, conversion will always be running, rely on the delay
+    // to ensure conversion is taking place with the correct settings
+    // can we use the rdy pin to trigger when a conversion is done?
+    if (!this->continuous_mode_) {
       uint32_t start = millis();
       while (this->read_byte_16(ADS1115_REGISTER_CONFIG, &config) && (config >> 15) == 0) {
         if (millis() - start > 100) {
@@ -120,6 +124,7 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
         yield();
       }
     }
+  }
 
   uint16_t raw_conversion;
   if (!this->read_byte_16(ADS1115_REGISTER_CONVERSION, &raw_conversion)) {

esphome/components/midea_ac/midea_frame.h

@@ -102,8 +102,11 @@ class PropertiesFrame : public midea_dongle::BaseFrame {
   void set_sleep_mode(bool state) { this->set_bytemask_(20, 0x01, state); }
 
   /* TURBO MODE */
-  bool get_turbo_mode() const { return this->pbuf_[18] & 0x20; }
+  bool get_turbo_mode() const { return this->pbuf_[18] & 0x20 || this->pbuf_[20] & 0x02; }
-  void set_turbo_mode(bool state) { this->set_bytemask_(18, 0x20, state); }
+  void set_turbo_mode(bool state) {
+    this->set_bytemask_(18, 0x20, state);
+    this->set_bytemask_(20, 0x02, state);
+  }
 
   /* FREEZE PROTECTION */
   bool get_freeze_protection_mode() const { return this->pbuf_[31] & 0x80; }

esphome/components/template/number/__init__.py

@@ -9,6 +9,7 @@ from esphome.const import (
     CONF_MAX_VALUE,
     CONF_MIN_VALUE,
     CONF_OPTIMISTIC,
+    CONF_RESTORE_VALUE,
     CONF_STEP,
 )
 from .. import template_ns
@@ -26,6 +27,17 @@ def validate_min_max(config):
     return config
 
 
+def validate(config):
+    if CONF_LAMBDA in config:
+        if CONF_OPTIMISTIC in config:
+            raise cv.Invalid("optimistic cannot be used with lambda")
+        if CONF_INITIAL_VALUE in config:
+            raise cv.Invalid("initial_value cannot be used with lambda")
+        if CONF_RESTORE_VALUE in config:
+            raise cv.Invalid("restore_value cannot be used with lambda")
+    return config
+
+
 CONFIG_SCHEMA = cv.All(
     number.NUMBER_SCHEMA.extend(
         {
@@ -33,13 +45,15 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_MAX_VALUE): cv.float_,
             cv.Required(CONF_MIN_VALUE): cv.float_,
             cv.Required(CONF_STEP): cv.positive_float,
-            cv.Exclusive(CONF_LAMBDA, "lambda-optimistic"): cv.returning_lambda,
+            cv.Optional(CONF_LAMBDA): cv.returning_lambda,
-            cv.Exclusive(CONF_OPTIMISTIC, "lambda-optimistic"): cv.boolean,
+            cv.Optional(CONF_OPTIMISTIC): cv.boolean,
             cv.Optional(CONF_SET_ACTION): automation.validate_automation(single=True),
             cv.Optional(CONF_INITIAL_VALUE): cv.float_,
+            cv.Optional(CONF_RESTORE_VALUE): cv.boolean,
         }
     ).extend(cv.polling_component_schema("60s")),
     validate_min_max,
+    validate,
 )
 
 
@@ -60,13 +74,15 @@ async def to_code(config):
         )
         cg.add(var.set_template(template_))
 
-    elif CONF_OPTIMISTIC in config:
+    else:
+        if CONF_OPTIMISTIC in config:
             cg.add(var.set_optimistic(config[CONF_OPTIMISTIC]))
+        if CONF_INITIAL_VALUE in config:
+            cg.add(var.set_initial_value(config[CONF_INITIAL_VALUE]))
+        if CONF_RESTORE_VALUE in config:
+            cg.add(var.set_restore_value(config[CONF_RESTORE_VALUE]))
 
     if CONF_SET_ACTION in config:
         await automation.build_automation(
             var.get_set_trigger(), [(float, "x")], config[CONF_SET_ACTION]
         )
-
-    if CONF_INITIAL_VALUE in config:
-        cg.add(var.set_initial_value(config[CONF_INITIAL_VALUE]))

esphome/components/template/number/template_number.cpp

@@ -7,17 +7,21 @@ namespace template_ {
 static const char *const TAG = "template.number";
 
 void TemplateNumber::setup() {
-  if (this->f_.has_value() || !this->optimistic_)
+  if (this->f_.has_value())
     return;
 
-  this->pref_ = global_preferences.make_preference<float>(this->get_object_id_hash());
   float value;
+  if (!this->restore_value_) {
+    value = this->initial_value_;
+  } else {
+    this->pref_ = global_preferences.make_preference<float>(this->get_object_id_hash());
     if (!this->pref_.load(&value)) {
       if (!isnan(this->initial_value_))
         value = this->initial_value_;
       else
         value = this->traits.get_min_value();
     }
+  }
   this->publish_state(value);
 }
 
@@ -35,10 +39,11 @@ void TemplateNumber::update() {
 void TemplateNumber::control(float value) {
   this->set_trigger_->trigger(value);
 
-  if (this->optimistic_) {
+  if (this->optimistic_)
     this->publish_state(value);
+
+  if (this->restore_value_)
     this->pref_.save(&value);
-  }
 }
 void TemplateNumber::dump_config() {
   LOG_NUMBER("", "Template Number", this);

esphome/components/template/number/template_number.h

@@ -20,11 +20,13 @@ class TemplateNumber : public number::Number, public PollingComponent {
   Trigger<float> *get_set_trigger() const { return set_trigger_; }
   void set_optimistic(bool optimistic) { optimistic_ = optimistic; }
   void set_initial_value(float initial_value) { initial_value_ = initial_value; }
+  void set_restore_value(bool restore_value) { this->restore_value_ = restore_value; }
 
  protected:
   void control(float value) override;
   bool optimistic_{false};
   float initial_value_{NAN};
+  bool restore_value_{false};
   Trigger<float> *set_trigger_ = new Trigger<float>();
   optional<std::function<optional<float>()>> f_;
 

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "1.20.0b4"
+__version__ = "1.20.0b5"
 
 ESP_PLATFORM_ESP32 = "ESP32"
 ESP_PLATFORM_ESP8266 = "ESP8266"

requirements.txt

@@ -11,4 +11,4 @@ ifaddr==0.1.7
 platformio==5.1.1
 esptool==2.8
 click==7.1.2
-esphome-dashboard==20210623.0
+esphome-dashboard==20210719.0