dependabot[bot]
251240cc90
Bump platformio from 5.1.0 to 5.1.1 ( #1618 )
...
Bumps [platformio](https://github.com/platformio/platformio ) from 5.1.0 to 5.1.1.
- [Release notes](https://github.com/platformio/platformio/releases )
- [Changelog](https://github.com/platformio/platformio-core/blob/develop/HISTORY.rst )
- [Commits](https://github.com/platformio/platformio/compare/v5.1.0...v5.1.1 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-19 21:29:26 +13:00
DrZoid
e5b45b6b4b
e131: fix issue 1579: limitation of maximum light count ( #1619 )
2021-03-19 21:19:34 +13:00
Steve Baxter
a77784a6da
Implement pulse_meter as an improvement on pulse_counter and pulse_width for meters ( #1434 )
2021-03-19 21:16:27 +13:00
Mike Ryan
f63f9168ff
Add addressable_light display platform ( #1272 )
2021-03-18 19:08:50 +13:00
SenexCrenshaw
b5b2036971
8266 hardware spi enable with just 3 pins ( #1617 )
2021-03-18 13:59:47 +13:00
SenexCrenshaw
a96b6e7002
SPI transfer fix. Use write when no miso pin is set ( #1563 )
2021-03-18 13:54:58 +13:00
Sergey V. DUDANOV
f34c9b33fc
Midea climate support ( #1328 )
...
* Added support for Midea IoT climate devices via UART interface (USB-dongle)
* Fixed lint checks
* Fixed lint checks
* CODEOWNERS update
* Clang-format
* Clang-format
* Add network device notification message support (show WiFi sign on devices)
* Make wifi_signal_sensor optional component
* Some optimization
* Optimizations and code formatting
* Fixed lint checks
* Fixed lint checks
* Fixed sign error
* Code changes
* Network notify repeat every 10 min
* Added log messages
* Fixed lint checks
* Refactoring: MideaClimate => MideaAC
* Using enums instead literals in Midea states
* Enum changed to be more correct
* Shrink notify frame to 32 bytes
* Fixed lint checks
* Change notify frame appliance type to common broadcast
* Control optimization
* Fixed control error
* Control command now don't reset others uncontrollable properties of device
* Fixed lint checks
* Some optimization
* on_receive callback give const Frame
* Fix control
* Fixes
* Some minor changes
* Fixed lint error
* No dependency from wifi_signal sensor for stretched WiFi icon. New option: stretched_icon instead wifi_signal_id.
* Fix option name
* Added export of outdoor temperature as sensor value
* Fixed lint errors
* Fixed pylint error
* Minor fix
* Fix temperature overflow in some cases
* Added answer on QueryNetwork command from appliance. Now don't wait for ack on 0x0D command.
* Fix lint error
* Added humidity setpoint optional sensor
* Added boolean options 'swing_horizontal' and 'swing_both'
* Added debug frame output
* Added debug frame output
* Fix lints error
* Some debug output optimization
* Fix lint check
* Some code optimization: adding templates
* Fix lint error
* Added sensors device classes
* Python code reformatted with black formatter
* RX frame debug message
RX frame debug message now prints before checking
* Remove CRC check for receiving frames
* Added experimental power usage option
* Added power usage option
* Fixed lint errors
* Major changes. See esp-docs.
* Added tests in test4.yaml
* Added tests in test1.yaml
* Added wifi dependency
* Fix test1.yaml
* Some fix :)
* One more refactoring
* One more refactoring
* One more refactoring
2021-03-17 17:27:50 -03:00
Jesse Hills
faf577a9dd
Add option to suffix name with mac address ( #1615 )
...
* Add option to suffix name with mac address
* Rename and add to test file
2021-03-17 17:22:48 -03:00
Jim Ekman
7708b81ef5
Support fan speed levels ( #1541 )
...
* Add fan speed percentage support to the API
* Add float fan speed percentage
* Add percentage support to automation and configuration
* Update Tuya fan
* Fix pylint warning
* Update API to use speed levels instead of percentage
* Use speed levels
* Fix type warnings
* MQTT component now converts between speed levels and enums
* Webserver now supports speed_level
* Update prometheus
* Remove low/medium/high settings from speed fan
* Remove unused enum
* Configurable speed levels for speed fan
* Remove unused import
* Rename speed_level->speed and speed_levels->speed_count
* Rename supported_speed_levels -> supported_speed_count in API and FanTraits
Field id stays the same in the protocol, so the change is not breaking for aioesphome.
2021-03-17 10:40:02 -03:00
WeekendWarrior1
08998caabc
a4988 wait 1ms when coming out of sleep ( #1597 )
2021-03-13 21:29:31 -03:00
Jesse Hills
848a5f1680
Change COLOR_ON to be 255 values instead of 1 ( #1594 )
2021-03-13 21:27:16 -03:00
Alex
2e7c1d7345
Added receive for Fujitsu ACs ( #1577 )
2021-03-13 18:45:01 -03:00
Massimiliano Ravelli
28a72fa56b
Fixed component_tests config ( #1608 )
2021-03-12 19:58:43 -03:00
Jesse Hills
cd1353ae54
Update PULL_REQUEST_TEMPLATE.md
2021-03-13 08:42:37 +13:00
Samuel Sieb
c9ee513fa8
PN532 - don't read extra page and fix size ( #1565 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-03-11 18:26:55 +13:00
Samuel Sieb
2a12caa955
change lcd clear() to clear the buffer ( #1600 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-03-11 18:17:50 +13:00
Guillermo Ruffino
5e5f8d5f9b
schema-dump-pins ( #1596 )
...
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
* support pin schema
2021-03-08 22:53:20 -03:00
Derek Hageman
2c0fe49b86
Inkplate 6 Optimizations ( #1592 )
2021-03-08 19:25:49 +13:00
Guillermo Ruffino
1e227e8051
Schema dump ( #1564 )
...
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
2021-03-07 21:05:08 -03:00
Guillermo Ruffino
d5cf4b7eac
Improve error checking: too many component id candidates ( #1570 )
...
* add error too many candidates
* Improve error checking of ids
2021-03-07 19:59:32 -03:00
Jesse Hills
570ec36fe3
MCP23XXX Refactor ( #1560 )
...
* Refactor MCP23XXX classes to consolidate shared code
* Update test mcp23xxx pin schemas
2021-03-07 16:23:54 -03:00
Guillermo Ruffino
69879920eb
add-black ( #1593 )
...
* Add black
Update pre commit
Update pre commit
add empty line
* Format with black
2021-03-07 16:03:16 -03:00
Guillermo Ruffino
2b60b0f1fa
fix servo warning ( #1591 )
2021-03-06 19:59:06 -03:00
dependabot[bot]
c17624adab
Bump platformio from 5.0.4 to 5.1.0 ( #1581 )
...
Bumps [platformio](https://github.com/platformio/platformio ) from 5.0.4 to 5.1.0.
- [Release notes](https://github.com/platformio/platformio/releases )
- [Changelog](https://github.com/platformio/platformio-core/blob/develop/HISTORY.rst )
- [Commits](https://github.com/platformio/platformio/compare/v5.0.4...v5.1.0 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-06 18:41:19 -03:00
needspeed
0f151a8f6b
Extend 'uart:' with 'invert:' for esp32 ( #1586 )
2021-03-06 10:25:07 -03:00
dependabot[bot]
e62bf333a2
Bump pylint from 2.6.0 to 2.7.2 ( #1582 )
...
Bumps [pylint](https://github.com/PyCQA/pylint ) from 2.6.0 to 2.7.2.
- [Release notes](https://github.com/PyCQA/pylint/releases )
- [Changelog](https://github.com/PyCQA/pylint/blob/master/ChangeLog )
- [Commits](https://github.com/PyCQA/pylint/compare/pylint-2.6.0...pylint-2.7.2 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-05 10:10:58 -03:00
Gabe Cook
88b46b7487
Add min/max filters ( #1569 )
2021-03-05 10:10:06 -03:00
nikito7
fa290fbce8
Fix for waveshare 2.13in-ttgo-b73 ( #1543 )
2021-03-04 13:50:27 +13:00
dependabot[bot]
1883ce1876
Bump pytz from 2020.5 to 2021.1 ( #1575 )
...
Bumps [pytz](https://github.com/stub42/pytz ) from 2020.5 to 2021.1.
- [Release notes](https://github.com/stub42/pytz/releases )
- [Commits](https://github.com/stub42/pytz/compare/release_2020.5...release_2021.1 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-03 15:42:19 -03:00
dependabot[bot]
f3fe2bde38
Bump pytest from 6.2.1 to 6.2.2 ( #1574 )
...
Bumps [pytest](https://github.com/pytest-dev/pytest ) from 6.2.1 to 6.2.2.
- [Release notes](https://github.com/pytest-dev/pytest/releases )
- [Changelog](https://github.com/pytest-dev/pytest/blob/master/CHANGELOG.rst )
- [Commits](https://github.com/pytest-dev/pytest/compare/6.2.1...6.2.2 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-03 15:41:27 -03:00
Andrew Zaborowski
811c13d7d1
pins: Add three new boards ( #1576 )
...
Add the Lolin32 Lite and TTGO T7 board names so that esphome can be
built for those boards. There's nothing special about them. The
espressif/arduino-esp32 and platformio/platform-espressif32 projects
have both merged definitions for those boards recently.
2021-03-03 15:40:25 -03:00
dependabot[bot]
521dfe08f2
Bump colorlog from 4.6.2 to 4.7.2 ( #1473 )
...
Bumps [colorlog](https://github.com/borntyping/python-colorlog ) from 4.6.2 to 4.7.2.
- [Release notes](https://github.com/borntyping/python-colorlog/releases )
- [Commits](https://github.com/borntyping/python-colorlog/compare/v4.6.2...v4.7.2 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-02 23:42:41 -03:00
dependabot[bot]
2c77d121da
Bump pytest-cov from 2.10.1 to 2.11.1 ( #1483 )
...
Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov ) from 2.10.1 to 2.11.1.
- [Release notes](https://github.com/pytest-dev/pytest-cov/releases )
- [Changelog](https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst )
- [Commits](https://github.com/pytest-dev/pytest-cov/compare/v2.10.1...v2.11.1 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-03-02 23:41:51 -03:00
Cody James
c5dc736c53
changed color temp from float to int ( #1522 )
...
* changed color temp from float to int
Changed cold_white_temperature and warm_white temperature from a float to an integer. This makes home assisting show it correctly in the color temperature slider. If it is set to float home assistant show something like 470.8390000283847829304845 in the slider which provides an ugly ui and color temperature to as a decimal is invalid anyway.
* Update esphome/components/rgbww/light.py
* Update esphome/components/rgbww/light.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 23:41:15 -03:00
Moritz Glöckl
8e93735861
Add support for the SM300D2 7-in-1 sensor module ( #1524 )
...
* Added support for SM300D2 sensor module
* Fixed lint errors due to added tvoc config
* add device class
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 21:54:52 -03:00
SenexCrenshaw
ac25b138f5
Migrate ESPColor to Color ( #1551 )
...
* Migrate ESPColor to Color
* color.h constructor fix
* Updated componets to use Color
Added a using for ESPColor
* Lint fixes
* Fixed value error
* Update display components to use colorutil
* Updated to latest PR comments
* Fixed COLOR_WHITE
* Moved esp_scale to color_utils
* Rename color_utils to display_color_utils
2021-03-02 11:08:57 -03:00
Guillermo Ruffino
b17e0c298e
fix path on windows escape ( #1573 )
2021-03-01 22:16:36 -03:00
marecabo
422f0ad7a9
Add constants for device classes of binary_sensor ( #1549 )
2021-02-28 20:55:32 -03:00
Christian Ferbar
34d37961c3
ADC fix: GPIO0 not usable as output if ADC_VCC is used ( #1557 )
2021-02-28 14:02:02 -03:00
Seppel Hardt
bdf004867d
Added samsung36 ir protocol ( #1438 )
...
* Added samsung36 ir protocol
* Make linter happy
* Added test and fixed python failure
* Sorry for the commits but linter was still not happy :)
* Okay have to run script/clang-format -i
Co-authored-by: tuxBurner <tuxBurner@boggo.de>
2021-02-27 20:16:27 -03:00
Gabe Cook
08ecca86bc
Add send_every to uart switch for recurring data ( #1514 )
2021-02-27 19:53:53 -03:00
marecabo
520c4331e3
Add default device classes to sensor components ( #1533 )
...
* Add device_class arg to homeassistant sensor_schema call
* Add device_class arg to mqtt_subscribe sensor_schema call
* Add device_class arg to dht sensor_schema call
* Add device_class arg to dht12 sensor_schema call
* Add device_class arg to am2320 sensor_schema call
* Add device_class arg to atc_mithermometer sensor_schema call
* Add device_class arg to atm90e32 sensor_schema call
* Add device_class arg to bh1750 sensor_schema call
* Add device_class arg to ble_rssi sensor_schema call
* Add device_class arg to bme280 sensor_schema call
* Add device_class arg to bme680 sensor_schema call
* Add device_class arg to bmp085 sensor_schema call
* Add device_class arg to bmp280 sensor_schema call
* Add device_class arg to binary_sensor_map sensor_schema call
* Add device_class arg to apds9960 sensor_schema call
* Add device_class arg to as3935 sensor_schema call
* Add device_class arg to ccs811 sensor_schema call
* Add device_class arg to cse7766 sensor_schema call
* Add device_class arg to ct_clamp sensor_schema call
* Add device_class arg to dallas sensor_schema call
* Add device_class arg to duty_cycle sensor_schema call
* Add device_class arg to esp32_hall sensor_schema call
* Add device_class arg to hdc1080 sensor_schema call
* Add device_class arg to hlw8012 sensor_schema call
* Add device_class arg to hm3301 sensor_schema call
* Add device_class arg to hmc5883l sensor_schema call
* Add device_class arg to htu21d sensor_schema call
* Add device_class arg to hx711 sensor_schema call
* Add device_class arg to ina219 sensor_schema call
* Add device_class arg to ina226 sensor_schema call
* Add device_class arg to ina3221 sensor_schema call
* Add device_class arg to ibsth1 sensor_schema call
* Add device_class arg to max31855 sensor_schema call
* Add device_class arg to max31856 sensor_schema call
* Add device_class arg to max31865 sensor_schema call
* Add device_class arg to mhz19 sensor_schema call
* Add device_class arg to max6675 sensor_schema call
* Add device_class arg to mpu6050 sensor_schema call
* Add device_class arg to ms5611 sensor_schema call
* Add device_class arg to mcp9808 sensor_schema call
* Add device_class arg to ntc sensor_schema call
* Add device_class arg to pid sensor_schema call
* Add device_class arg to pmsx003 sensor_schema call
* Add device_class arg to pulse_counter sensor_schema call
* Add device_class arg to pulse_width sensor_schema call
* Add device_class arg to pzem004t sensor_schema call
* Add device_class arg to pzemac sensor_schema call
* Add device_class arg to pzemdc sensor_schema call
* Add device_class arg to qmc5883l sensor_schema call
* Add device_class arg to resistance sensor_schema call
* Add device_class arg to rotary_encoder sensor_schema call
* Add device_class arg to ruuvitag sensor_schema call
* Add device_class arg to scd30 sensor_schema call
* Add device_class arg to sds011 sensor_schema call
* Add device_class arg to senseair sensor_schema call
* Add device_class arg to sgp30 sensor_schema call
* Add device_class arg to sht3xd sensor_schema call
* Add device_class arg to shtcx sensor_schema call
* Add device_class arg to sps30 sensor_schema call
* Add device_class arg to sts3x sensor_schema call
* Add device_class arg to sun sensor_schema call
* Add device_class arg to tcs34725 sensor_schema call
* Add device_class arg to teleinfo sensor_schema call
* Add device_class arg to template sensor_schema call
* Add device_class arg to tmp102 sensor_schema call
* Add device_class arg to tmp117 sensor_schema call
* Add device_class arg to tsl2561 sensor_schema call
* Add device_class arg to tx20 sensor_schema call
* Add device_class arg to ultrasonic sensor_schema call
* Add device_class arg to uptime sensor_schema call
* Add device_class arg to vl53l0x sensor_schema call
* Add device_class arg to wifi_signal sensor_schema call
* Add device_class arg to xiaomi_cgd1 sensor_schema call
* Add device_class arg to xiaomi_cgg1 sensor_schema call
* Add device_class arg to xiaomi_gcls002 sensor_schema call
* Add device_class arg to xiaomi_hhccjcy01 sensor_schema call
* Add device_class arg to xiaomi_hhccpot002 sensor_schema call
* Add device_class arg to xiaomi_jqjcy01ym sensor_schema call
* Add device_class arg to xiaomi_lywsd02 sensor_schema call
* Add device_class arg to xiaomi_lywsd03mmc sensor_schema call
* Add device_class arg to xiaomi_lywsdcgq sensor_schema call
* Add device_class arg to xiaomi_mhoc401 sensor_schema call
* Add device_class arg to xiaomi_mjyd02yla sensor_schema call
* Add device_class arg to xiaomi_wx08zm sensor_schema call
* Add device_class arg to zyaura sensor_schema call
* Add device_class arg to ads1115 sensor_schema call
* Add device_class arg to adc sensor_schema call
* Add device_class arg to ade7953 sensor_schema call
* Add device_class arg to aht10 sensor_schema call
* Make args of sensor_schema required
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-27 19:28:06 -03:00
Guillermo Ruffino
342d5166a0
More yaml validation ( #1568 )
...
* validate keys
* refactor line info
2021-02-27 19:21:07 -03:00
Otamay
69d39ef0cd
Added heater to climate_ir_lg ( #1555 )
...
* Added heater to climate_ir_lg
* Code formatting
* Code formatting
2021-02-27 18:55:27 -03:00
Robert Resch
6588e9380e
Replace substitutions in substitutions first ( #1567 )
2021-02-27 18:47:12 -03:00
Guillermo Ruffino
4d6277330b
Update PULL_REQUEST_TEMPLATE.md
2021-02-26 10:32:23 -03:00
stubs12
87154e9b6f
Tuya: Use queue for sending command messages ( #1404 )
2021-02-26 12:52:40 +13:00
Kurt Kellner
b91723344e
Vl53l0x change address ( #1126 )
...
* Added vl53l0x change address and timeout
* Added vl53l0x change address and timeout
* vl53l0x code cleanup and update test
* remove executable bit
* lint code cleanup
* code review fixes including timeout default to 10ms
* Code review cleanup and change a WARN log level message to DEBUG
* Fix issue where warn should be temporary
* Added name of sensor to warning message
* Fix blacklist lint issue
* Remove unused import
2021-02-25 19:12:06 -03:00
Otamay
92b36720b6
Climate IR LG -keep previous temp and fan if swing ( #1556 )
...
Swing IR command does not carry CLIMATE_FAN or TEMP within itself, so previous states sould be kept. Tested with actual LG IR remote controller.
2021-02-25 18:26:19 -03:00
spilin
3d0310d0e0
Add dial support for sim800l component ( #1558 )
2021-02-25 18:11:15 -03:00
