Jesse Hills
808ce6eecb
Merge pull request #1548 from esphome/bump-1.16.2
...
1.16.2
2021-02-20 19:58:48 +13:00
Jesse Hills
665d0fd759
Bump version to v1.16.2
2021-02-20 19:29:52 +13:00
Jesse Hills
c519c02de8
Fix safe mode ota flashing under certain configurations ( #1534 )
...
* Fix safe mode ota flashing under certain configurations by allowing the arduino loop to run instead of while(true)
* rename to should_enter_safe_mode
* Fix line length
2021-02-20 19:29:52 +13:00
Samuel Sieb
eacac78099
Add reverse_enable for max7219 ( #1489 )
2021-02-20 19:29:52 +13:00
Kris
a925036ff8
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-20 19:29:52 +13:00
SenexCrenshaw
1468293f3e
fix DHT auto_detect check ( #1536 )
2021-02-20 19:29:52 +13:00
Jesse Hills
925a992d1b
Merge pull request #1531 from esphome/bump-1.16.1
...
1.16.1
2021-02-14 15:04:43 +13:00
Jesse Hills
61ecbe4273
Bump version to v1.16.1
2021-02-14 10:01:22 +13:00
Keith Burzinski
65c7e27a43
MCP230xx open drain interrupt pins ( #1243 )
2021-02-14 10:01:21 +13:00
Frank Bakker
57b56010da
Added energy sensor to hlw8012 ( #1198 )
2021-02-14 10:01:21 +13:00
SenexCrenshaw
ef89249019
Fixed ST7735 transfer_byte to write_byte without miso
( #1529 )
2021-02-14 10:01:21 +13:00
Klarstein
bc64cf3e47
Update Dockerfile health check timings ( #1517 )
2021-02-14 10:01:21 +13:00
Jesse Hills
def70dde72
Fix PN532 SPI communication ( #1511 )
2021-02-14 10:01:21 +13:00
Jesse Hills
d238e06f86
Merge pull request #1509 from esphome/bump-1.16.0
...
1.16.0
2021-02-04 02:56:32 +13:00
Jesse Hills
2fc59ecc30
Bump version to v1.16.0
2021-02-03 21:19:42 +13:00
Jesse Hills
0047d24698
Merge pull request #1507 from esphome/bump-1.16.0b8
...
1.16.0b8
2021-02-03 13:17:40 +13:00
Jesse Hills
89a89e1785
Bump version to v1.16.0b8
2021-02-03 12:33:30 +13:00
Guillermo Ruffino
1952d275f7
RC522 increased retry loop count ( #1506 )
2021-02-03 12:33:29 +13:00
hcoohb
043095b605
fix esp8266 remote_transmitter using incorrect timings ( #1465 )
...
* replace delay by delayMicroseconds in delay_microseconds_accurate
* Use delay(0) to let wifi and os function run
* Linting
* Remove unneeded delayMicroseconds, keep it for low usec
* Avoid micros() overflow issue
2021-02-03 12:33:29 +13:00
Jesse Hills
431d3578a5
Merge pull request #1504 from esphome/bump-1.16.0b7
...
1.16.0b7
2021-02-01 18:42:33 +13:00
Jesse Hills
5f02d86841
Bump version to v1.16.0b7
2021-02-01 15:34:45 +13:00
Jesse Hills
a7ec57d4be
Allow SCD30 sensors to be optional ( #1502 )
2021-02-01 15:34:44 +13:00
Jesse Hills
1ea5cc497f
Merge pull request #1497 from esphome/bump-1.16.0b6
...
1.16.0b6
2021-01-27 23:19:17 +13:00
Jesse Hills
b601cf6bc6
Bump version to v1.16.0b6
2021-01-27 23:04:20 +13:00
nikito7
5057caa7fc
Add support for MHO-C401 ( #1486 )
...
Committer: nikito7
Co-authored-by: vevsvevs <v-v@mail.ru>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: nikito7 <root@vbox.lan>
2021-01-27 23:04:20 +13:00
Klarstein
95bef53d37
Add docker healthcheck ( #1492 )
2021-01-27 23:04:20 +13:00
Paul Nicholls
ea019a057b
Add support for string-type Tuya datapoints ( #1488 )
2021-01-27 23:04:20 +13:00
Jesse Hills
b860a317b9
Merge pull request #1495 from esphome/bump-1.16.0b5
...
1.16.0b5
2021-01-26 14:45:53 +13:00
Jesse Hills
9591c903f7
Bump version to v1.16.0b5
2021-01-26 13:39:43 +13:00
SenexCrenshaw
65fbb8bc60
SPI wasnt being disabled after display update ( #1493 )
2021-01-26 13:39:42 +13:00
Philipp Tölke
97428f2ba2
Make fade_to*, lighten, and darken const ( #1450 )
2021-01-26 13:39:42 +13:00
Zixuan Wang
9ab6a7b7ff
Improve ccs811 precision ( #1428 )
2021-01-26 13:39:42 +13:00
Florian Mösch
e2ad6fe3d8
rename read/write to read/time/write_time ( #1468 )
2021-01-26 13:39:42 +13:00
Florian Mösch
6781d08c9b
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-26 13:39:42 +13:00
Jesse Hills
828f7946ea
Merge pull request #1475 from esphome/bump-1.16.0b4
...
1.16.0b4
2021-01-17 17:20:36 +13:00
Jesse Hills
23c663d5d4
Bump version to v1.16.0b4
2021-01-17 17:06:38 +13:00
David Zovko
6a99789c92
Inkplate 6 support for ESPHome ( #1283 )
...
* Add Inkplate 6 support
Inkplate 6 is e-paper display based on ESP32. This commit adds support for integrating Inkplate 6 into the ESPHome. Find more info here: inkplate.io
* Greyscale working
* Update inkplate.h
* Fix formatting
* Formatting
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Fix some lint errors
Ignore some lint errors
Only allow on ESP32
* Update the codeowners file
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:38 +13:00
Jesse Hills
52e13164b4
Add NDEF reading and writing to PN532 ( #1351 )
2021-01-17 17:06:38 +13:00
SenexCrenshaw
28f2582256
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:37 +13:00
Florian Mösch
652f6058d1
make time components polling components ( #1443 )
...
* make real time clock components polling components
* add test
2021-01-17 17:06:37 +13:00
Guillermo Ruffino
717aab7c8b
Add rc522 i2c ( #1432 )
...
* split to spi and i2c
* fix binary_sensor
* i2c comms ready
* fix rc522_spi binary sensor compat
* lint
* lint
* add test and codeowners
* fix refactor
2021-01-17 17:06:37 +13:00
dependabot[bot]
5e799b5284
Bump pytest-mock from 3.3.1 to 3.5.1 ( #1458 )
...
Bumps [pytest-mock](https://github.com/pytest-dev/pytest-mock ) from 3.3.1 to 3.5.1.
- [Release notes](https://github.com/pytest-dev/pytest-mock/releases )
- [Changelog](https://github.com/pytest-dev/pytest-mock/blob/master/CHANGELOG.rst )
- [Commits](https://github.com/pytest-dev/pytest-mock/compare/v3.3.1...v3.5.1 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-01-17 17:06:37 +13:00
mmanza
9f36b25d4e
Whirlpool ac ( #1467 )
...
* Checksum calc change
* first checksum change for MODEL_DG11J1_3A
2021-01-17 17:06:37 +13:00
Jesse Hills
c8058e9636
Merge pull request #1463 from esphome/bump-1.16.0b3
...
1.16.0b3
2021-01-12 09:57:51 +13:00
Jesse Hills
f2474c5c45
Bump version to v1.16.0b3
2021-01-12 09:42:19 +13:00
Guillermo Ruffino
7acc36d39d
Revert esptool to 2.8 ( #1460 )
...
Fixes https://github.com/esphome/issues/issues/1702
2021-01-12 09:42:19 +13:00
mknjc
b01db991a5
API: copy the data to send into the tcp internal buffer ( #1455 )
...
Without the flag lwip only holds a reference to the supplied buffers and the reference must be valid until the tcp ack is received. This can't be guaranteed for stack allocated buffers
2021-01-12 09:42:19 +13:00
Jesse Hills
8c849b9002
Merge pull request #1459 from esphome/bump-1.16.0b2
...
1.16.0b2
2021-01-11 21:08:18 +13:00
Jesse Hills
6a0d4cb5a9
Bump version to v1.16.0b2
2021-01-11 20:10:36 +13:00
mknjc
72002ce70e
Rotary Encoder: Don't call callbacks in the isr ( #1456 )
2021-01-11 20:10:35 +13:00