Commit graph

207 commits

Author SHA1 Message Date
Jesse Hills
ed5f207eba
Add support for Tuya Binary Sensors (#1089)
* Add Tuya binary sensor

* Add tuya binary sensor to test4

* Fix copy/paste

* Forgot id
2020-07-11 19:50:41 -03:00
Jesse Hills
a76b8e745b
Add support for Tuya Sensors (#1088)
* Add Tuya sensor

* Add tuya sensor to test4

* Forgot id
2020-07-11 19:46:10 -03:00
Jesse Hills
68d29c5af5
Add support for Tuya Climate devices (#1076)
* Start support for tuya climate devices

* Add tuya climate to test4

* Fix lint and cast

* Remove blank line

* Try to display accurate action based on observed behaviour.

* Fix action when in off mode

* Improve config dump

* merge use of CONF_SWITCH_DATAPOINT

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-07-11 19:04:34 -03:00
Jesse Hills
ef9e6e4d6e
Add support for Tuya Switches (#1074)
* Add tuya component to test4.yaml

* Add support for tuya switches

* Better config dump
2020-07-11 17:52:29 -03:00
Keith Burzinski
417a3cdf51
Add SSD1351 OLED display support (#1100)
* Add SSD1351 display support

* Linting round 2

* Updated/rebased for proper Color support

* Fix color image processing
2020-07-09 23:49:26 -03:00
peq123
e5d4e12457
RGBWW - added channel interlock for RGB vs white (#1042)
* Update light_color_values.h

* Update light_color_values.h

* Update light_color_values.h

* Update light_color_values.h

* colour relative to white value

* Update light_state.cpp

* Update light_state.cpp

* Update light_state.cpp

* Update light_state.cpp

* Update light_color_values.h

* Update light_state.cpp

* linting

* Update light_state.cpp

* Update light_color_values.h

* more lint

* more lint

* Update light_state.cpp

* Update light_state.cpp

* Update light_state.cpp

* add optional interlock

* Update test1.yaml

* Update light_state.cpp

* Update light_state.h

* interlock

* optional interlock.

* interlock as trait

* color interlock as trait

* optional color interlock....

* optional color interlock

* Update light_color_values.h

* Lint checks....

* making travis happy

* making sure gamma_correct fix is included

* Update light_color_values.h

* making travis happy

* clang-format

* Code tidy

* Update light_color_values.h

* Update light_color_values.h
2020-07-09 20:29:44 -03:00
Keith Burzinski
d4e76185bd
Thermostat component (#1105)
* Add thermostat component

* Add hysteresis accessor

* Linted

* Fixed up const.py and test

* Fix test...again...oops
2020-07-01 22:38:51 -03:00
Guillermo Ruffino
f479eae714
Revert "Climate bang bang enhancements (#1061)" (#1106)
This reverts commit 0082c5b459.
2020-07-01 14:08:55 -03:00
rspaargaren
83a12d980e
Vl53 long range (#1055)
* Update vl53l0x_sensor.cpp

Changed values for long range support

* added true / false option for long range detection

* debug missing ,

* further debug option long_range

* Travis updates

* added travis tests

* Travis removed space should be good now

* update to trigger travis again

* added old test files for PR

* added vl5310x sensor for compile testing

* fix variable names

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-28 18:47:43 -03:00
Keith Burzinski
491f7e96f0
Add support for ST7789V display module (as on TTGO T-Display) (#1050)
* TFT-LCD ST7789V of ESP32 TTGO.

This patch allows you to use TFT-LCD ST7789V of ESP32 TTGO

* Lots of polish and a few tweaks

* Add test

* Add color to core, take 1

* Where did those tabs come from?

* Fix lines too long

* Added color component

* Linted

* Rebase, SPI fix, test

* Shuffle bits

* One more thing...oops

* Image type fix...oops

* Make display_buffer use Color

* Fix BGR/RGB, remove predefined colors

* Fix all the things

* renamed colors to color

* migrate max7219

Co-authored-by: musk95 <musk95@naver.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-28 18:37:36 -03:00
rspaargaren
bfb9cb6732
Max7219 in Dot Matrix configuration (#1053)
* push final files

* Update max7219digit.cpp

reenter small bug fix on uint8 declaration

* small debug

* set max offset to 100

* remove unwanted file

* Update font file to make travis happy

* travis update

* further progress in keeping Yarvis happy

* travis font

* travis will never be satisfied but one step ahead

* YARVIS TAKE 10000000

* never ending yarvis

* Almost there with Yarvis

* removed double declaration YARVIS

* added namespace to font file (TRAVIS)

* almost there last changes for YARVIS

* further travis updates

* removed files for travis

* fix display.py length of line travis remark

* further update on display.py

* file delete travis requirement

* final entry for travis?

* Some further debug on max offset

* Travis updates

* scroll_left_new

* 90degreesrotate

* added option to config rotate90

* four orientations for the chips

* new setup for scroll

* replaced small bug missing {}

* debug changed int8 to int16 on scroll function

* removed small merge failure

* travis updates round 1

* travis updates round 2

* travis details round 3

* added options to set scroll parameters in yaml conf

* removed ttf and png to satisfy travis

* travis update

* travis updates

* travis

* further updates after input from @glmnet

* remove deleted comments

* Added ENUM TYPE to config file

* change in test file

* removed test files

* updates for pull request

* Typing error removed

* travis update

* PR updates travis

* Update test3.yaml

* Update test3.yaml

* update device schema as per #988

* Delete partitions.csv

* repair on image display and invert routine

* further update and a bit of cleanup

* added writing 0 in draw pixel

* small deletion error

* travis updates

* Update max7219digit.cpp

adding intensity value to dynamically set value

* Update max7219digit.h

adding option for intensity

* remove some files from tests
2020-06-28 17:33:06 -03:00
phjr
3c9712d683
add support for SN74HC595 shift register (#1083)
* add support for SN74HC595 shift register

* fix linter errors

* more linter reported issues fixed

* hopefully last linter error cleanup

* one more linter fix

* looks like the linter is always keeping stuff for later, is this the final fix?

* add test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-27 19:08:15 -03:00
square99
82d5d50d61
Add LG Climate IR (#1097)
* Add LG Climate ir

* Add LG Climate IR

* Add LG Climate IR

* Add LG Climate IR

* Add LG Climate IR

* Add LG Climate IR

* Add LG Climate IR

Co-authored-by: Sangheon Heo <square99@SangHeonui-Macmini.local>
2020-06-21 22:29:43 -03:00
Samuel Sieb
f9a8629157
fix percentage handling (#1094)
* fix percentage handling

* add test

* fix lint errors

Co-authored-by: Samuel Sieb <samuel@sieb.net>
2020-06-19 20:59:19 -03:00
Keith Burzinski
0082c5b459
Climate bang bang enhancements (#1061)
* Add fan support to bang bang controller

* Fix heat-only and cool-only modes

* Added support for all climate actions and modes

* Fix up some comments

* Fan_only mode behavior tweak

* Updated test

* Updated test, take 2

* Add accessor methods for easier use in lambadas

* Revert "Add accessor methods for easier use in lambadas"

This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.

Don't code late at night when sleepy.

* Fix single/dual setpoint support

* Linted

* Properly implement single-point, validation improvements

* Another quick fix...sigh

* Update tests

* Update tests, take 2

* Revert "Update tests, take 2"

This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.

Nope.

* Revert "Update tests"

This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.

Nope 2.

* Updated/fixed tests

* Revert "Updated/fixed tests"

This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.

Taking a different approach.

* Revert "Another quick fix...sigh"

This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.

Taking a different approach.

* Revert "Properly implement single-point, validation improvements"

This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.

Taking a different approach.

* Single/dual set point fixes, full validation

* Fix test

* Fix restore-on-boot, clean up comments

* Decouple two-point/auto operation, more polish

* One last away mode tweak

* Added set point validation

* Clean up over-publishing, always call action after boot

* Add fan support to bang bang controller

* Fix heat-only and cool-only modes

* Added support for all climate actions and modes

* Fix up some comments

* Fan_only mode behavior tweak

* Updated test

* Updated test, take 2

* Add accessor methods for easier use in lambadas

* Revert "Add accessor methods for easier use in lambadas"

This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.

Don't code late at night when sleepy.

* Fix single/dual setpoint support

* Linted

* Properly implement single-point, validation improvements

* Another quick fix...sigh

* Update tests

* Update tests, take 2

* Revert "Update tests, take 2"

This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.

Nope.

* Revert "Update tests"

This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.

Nope 2.

* Updated/fixed tests

* Revert "Updated/fixed tests"

This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.

Taking a different approach.

* Revert "Another quick fix...sigh"

This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.

Taking a different approach.

* Revert "Properly implement single-point, validation improvements"

This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.

Taking a different approach.

* Single/dual set point fixes, full validation

* Fix test

* Fix restore-on-boot, clean up comments

* Decouple two-point/auto operation, more polish

* One last away mode tweak

* Added set point validation

* Clean up over-publishing, always call action after boot

* Added refresh() function to allow easy on-device state refreshing
2020-06-17 20:16:42 -03:00
Jim Persson
0bb81e5b2d
Add support for controlling fan direction (#1051)
* Fix fan oscillation trait not being used

* Add fan direction support to SpeedFan

* Add fan direction to API

* Add fan direction support to BinaryFan

* Fix CI errors

* Fix python format

* Change some ordering to trigger CI

* Add test for the configuration
2020-06-14 16:54:31 -03:00
Kamil Trzciński
0c0dec2534
Add WLED support (#1092)
A component to support [WLED](https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control).
This allows to control addressable LEDs over WiFi/UDP, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

It supports all WLED protocols:
- WARLS
- DRGB
- DRGBW
- DNRGB
- WLED Notifier

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:50:09 -03:00
Kamil Trzciński
d1b051a6bd
Add Adalight support (#956)
A component to support [Adalight](https://learn.adafruit.com/adalight-diy-ambient-tv-lighting).
This allows to control addressable LEDs over UART, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:34:38 -03:00
Kamil Trzciński
27204aa53c
Add E1.31 support (#950)
This adds a `e131` component that allows
to register `e131` addressable light effect.

This uses an internal implementation that
is thread-safe instead of using external libraries.
2020-06-12 20:17:13 -03:00
Evgeny
42007d03d4
AQI calculator for HM3301 (#1011)
* HM3301 AQI calculator

* remove logs

* fixed after lint

* fixed after lint

* fixed after lint

* check NP for AQI sensor

* validation for AQI sensor
2020-06-11 23:14:54 -03:00
Marvin Gaube
f63fd9696f
Add Webserver Prometheus support for sensor, binary sensor, fan, light, cover and switch (#1032) 2020-06-09 22:00:12 -03:00
Kamil Trzciński
cd7af19e7c
Extend uart: with rx_buffer_size: (#1006)
* Extend `uart:` with `rx_buffer_size:`

This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART

* lint

* remove old default value

* add test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-09 21:22:06 -03:00
rradar
d1f4c2ab57
BH1750 Measurement time (#997)
* BH1750 Measurement time

Fixes https://github.com/esphome/feature-requests/issues/148

* lint

* add test

Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-28 23:10:34 -03:00
Alexander Pohl
3fba3a5e2e
Add support for additional Xiaomi BLE sensors (#1027) (#1027) 2020-05-26 19:33:28 -03:00
declanshanaghy
e64246f642
Adding support for MAX31856 Thermocouple Temperature Sensor (feature #700) (#1039) 2020-05-24 19:33:59 -03:00
0hax
fb2b7ade41
Uart improvments (#1024)
* uart: Add support for specifying the number of bits and parity.

ESP8266SwSerial doesn't really check parity but just read the parity bit
and ignore it when receiving data.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: support begin and end methods.

A component may need to reset uart buffer/status by using begin() and
end() methods. This is useful for example when a component needs to be
sure it is not reading garbage from previously received data over uart.
For end() methods with software serial, disabling interrupt is
currently impossible because of a bug in esp8266 Core:
https://github.com/esp8266/Arduino/issues/6049

Signed-off-by: 0hax <0hax@protonmail.com>

* esphal: add support for detaching an interrupt.

That's needed when a component needs to enable/disable interrupt on a
gpio.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: rename CONF_NR_BITS to CONF_DATA_BITS_NUMBER.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use static const uint32_t instead of #define.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use an enum to handle parity.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: split between esp32 and esp8266.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: check_uart_settings for parity and number of data bits.

Signed-off-by: 0hax <0hax@protonmail.com>

* name param data_bits

* add new params to test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-24 18:59:07 -03:00
Oskar Napieraj
4de44a99eb
Add support for ESP32 DAC (#1071)
* Add support for ESP32 onboard DAC

* Newlines

* Tests
2020-05-24 00:06:55 -03:00
Jozef Zuzelka
153aadadae
Ble scanner (#976)
* Added ble_scanner component

* ble_scanner: time.h changed to ctime

* ble_scanner: Test added.

* ble_scanner: fixed code formatting.

* Removed duplicate binary sensor tests from test2 and test3 to decrease memory requirements.

* Removed another duplicate test from test2.yaml and moved stepper test to yaml3.yaml to reduce memory requirements of test2.yaml.

* Reverted the last stepper test change

* Moved some sensor tests from test2.yaml to test3.yaml to save memory.

* Moved ruuvitag back to test2.yaml as it requires component esp32_ble_tracker.

* removed apds9960 as it is duplicated

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-19 21:13:50 -03:00
Jesse Hills
26d6738abb
Allow tm1637 to use pins from IO expanders (#1058)
* Allow tm1637 to use pins from IO expanders

* Add test for io expander pins
2020-05-18 19:13:29 -03:00
Niklas Wagner
39b35b79ba
Make initial run variable available to addressable_lambda (#1035)
* Make initial run variable available to addressable_lambda

* Fix linting

* Remove if clause
2020-04-28 19:24:06 -03:00
puuu
ba1222eae4
Bluetooth advertising automation (#995)
* esp32_ble_tracker: introduce UUID comparison function

* ble_presence, ble_rssi: use new UUID comparison function

* esp32_ble_tracker: introduce automation on BLE advertising

* test2.yaml: remove deep_sleep due to firmware size restrictions
2020-04-27 20:57:02 -03:00
Guillermo Ruffino
31ae337931
add lights on off triggers (#1037)
* add lights on off triggers

* add test
2020-04-25 15:39:34 -03:00
Guillermo Ruffino
6123cb7c69
add mac address to wifi info (#1030)
* add mac address to wifi info

* add test

* lint
2020-04-24 20:58:32 -03:00
Guillermo Ruffino
8040e3cf95
Climate whirlpool (#1029)
* wip

* transmitter ready

* climate.whirlpool receiver implemented (#971)

* receiver implemented

* Support for two models of temp ranges

* temperature type and lint

* more lint

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>

* add test

* not mess line endings

Co-authored-by: mmanza <40872469+mmanza@users.noreply.github.com>
2020-04-21 22:53:14 -03:00
Tim Savage
d447548893
Tests for CPP Code generation and some Python3 improvements (#961)
* Basic pytest configuration

* Added unit_test script that triggers pytest

* Changed "fixtures" to fixture_path

This is consistent with pytest's tmp_path

* Initial unit tests for esphome.helpers

* Disabled coverage reporting for esphome/components.

Focus initial unittest efforts on the core code.

* Migrated some ip_address to hypothesis

* Added a hypothesis MAC address strategy

* Initial tests for core

* Added hypothesis to requirements

* Added tests for core classes

TestTimePeriod
Lambda
ID
DocumentLocation
DocumentRange
Define
Library

* Updated test config so package root is discovered

* Setup fixtures and inital tests for pins

* Added tests for validate GPIO

* Added tests for pin type

* Added initial config_validation tests

* Added more tests for config_validation

* Added comparison unit tests

* Added repr to core.TimePeriod. Simplified identifying faults in tests

* Fixed inverted gt/lt tests

* Some tests for Espcore

* Updated syntax for Python3

* Removed usage of kwarg that isn't required

* Started writing test cases

* Started writing test cases for cpp_generator

* Additional docs and more Python3 releated improvements

* More test cases for cpp_generator.

* Fixed linter errors

* Add codegen tests to ensure file API remains stable

* Add test cases for cpp_helpers
2020-04-19 21:05:58 -03:00
Alex Reid
c1dfed5c08
feat: Add support for MCP23016 IO Expander (#1012)
* feat: Add support for MCP23016 IO extander

* fix: Fix style
2020-04-12 16:07:10 -03:00
Otto Winter
835079ad43
Add AC Dimmer support (#880)
* Add AC Dimmer support

Fixes https://github.com/esphome/feature-requests/issues/278

* fixes

basically missed the output pin setup and in the switching was switching true true true :P

* Format

* Enable ESP32

* Also setup ZC pin

* Support multiple dimmers sharing ZC pin

* Fix ESP32

* Lint

* off gate on zc detect

* tests pins validation

* Climate Mitsubishi (#725)

* add climate

* Mitsubishi updates

* refactor mitsubishi to use climate_ir

* lint

* fix: only decode when not str already (#923)

Signed-off-by: wilmardo <info@wilmardenouden.nl>

* fix climate-ir bad merge (#935)

* fix climate-ir bad merge

* add mitshubishi test

* http_request: fix memory allocation (#916)

* http_request version fix (#917)

* PID Climate (#885)

* PID Climate

* Add sensor for debugging PID output value

* Add dump_config, use percent

* Add more observable values

* Update

* Set target temperature

* Add autotuner

* Add algorithm explanation

* Add autotuner action, update controller

* Add simulator

* Format

* Change defaults

* Updates

* Use b''.decode() instead of str(b'') (#941)

Handling of request arguments in WizardRequestHandler is not decoding
bytes and rather just doing a str conversion resulting in a value of
"b''" being supplied to the wizard code.

* Adding the espressif 2.6.3 (#944)

* extract and use current version of python 3 (#938)

* Inverted output in neopixelbus (#895)

* Added inverted output

* Added support for inverted output in neopixelbus

* Update esphome/components/neopixelbus/light.py

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* Update light.py

* corrected lint errors

Co-authored-by: Otto Winter <otto@otto-winter.com>

* Added degree symbol for MAX7219 7-segment display. (#764)

The ascii char to use it is "~" (0x7E).

Disclaimer: I didn't test this yet.

* Fix dump/tx of 64 bit codes (#940)

* Fix dump/tx of 64 bit codes

* fixed source format

* Update hdc1080.cpp (#887)

* Update hdc1080.cpp

increase waittime, to fix reading errors

* Fix: Update HDC1080.cpp

i fixed the my change on write_bytes

* add tcl112 support for dry, fan and swing (#939)

* Fix SGP30 incorrect baseline reading/writing (#936)

* Split the SGP30 baseline into 2 values

- According to the SGP30 datasheet, each eCO2 and TVOC baseline is a 2-byte value (MSB first)
- The current implementation ignores the MSB of each of the value
- Update the schema to allow 2 different baseline values (optional, but both need to be specified for the baseline to apply)

* Make both eCO2 and TVOC required if the optional baseline is defined

* Make dump_config() looks better

* Add register_*_effect to allow registering custom effects (#947)

This allows to register custom effect from user components,
allowing for bigger composability of source.

* Bugfix/normalize core comparisons (and Python 3 update fixes) (#952)

* Correct implementation of comparisons to be Pythonic

If a comparison cannot be made return NotImplemented, this allows the
Python interpreter to try other comparisons (eg __ieq__) and either
return False (in the case of __eq__) or raise a TypeError
exception (eg in the case of __lt__).

* Python 3 updates

* Add a more helpful message in exception if platform is not defined

* Added a basic pre-commit check

* Add transmit pioneer (#922)

* Added pioneer_protocol to support transmit_pioneer

* Display tm1637 (#946)

* add TM1637 support

* Support a further variant of Xiaomi CGG1 (#930)

* Daikin climate ir component (#964)

* Daikin ARC43XXX IR remote controller support

* Format and lint fixes

* Check temperature values against allowed min/max

* fix tm1637 missing __init__.py (#975)

* Add AC Dimmer support

Fixes https://github.com/esphome/feature-requests/issues/278

* fixes

basically missed the output pin setup and in the switching was switching true true true :P

* Format

* Enable ESP32

* Also setup ZC pin

* Support multiple dimmers sharing ZC pin

* Fix ESP32

* Lint

* off gate on zc detect

* tests pins validation

* fix esp8266 many dimmers, changed timing

* Increased value resolution, added min power

* use min_power from base class

* fix min_power. add init with half cycle

* added method for trailing pulse, trailing and leading

* fix method name. try filter invalid falling pulse

* renamed to ac_dimmer

* fix ESP32 not configuring zero cross twice

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Wilmar den Ouden <wilmardo@users.noreply.github.com>
Co-authored-by: Nikolay Vasilchuk <Anonym.tsk@gmail.com>
Co-authored-by: Tim Savage <tim@savage.company>
Co-authored-by: Vc <37367415+Valcob@users.noreply.github.com>
Co-authored-by: gitolicious <mrjchn@gmail.com>
Co-authored-by: voibit <krestean@gmail.com>
Co-authored-by: Luar Roji <cyberplant@users.noreply.github.com>
Co-authored-by: András Bíró <1202136+andrasbiro@users.noreply.github.com>
Co-authored-by: dmkif <dmkif@users.noreply.github.com>
Co-authored-by: Panuruj Khambanonda (PK) <pk@panurujk.com>
Co-authored-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Mario <4376789+mario-tux@users.noreply.github.com>
Co-authored-by: Héctor Giménez <hector.fwbz@gmail.com>
2020-04-10 00:07:18 -03:00
kroimon
8613c02d5c
Add constant_brightness property to CWWW/RGBWW lights (#1007)
Fixes https://github.com/esphome/feature-requests/issues/460

Co-authored-by: Otto Winter <otto@otto-winter.com>
2020-04-08 09:31:23 -03:00
Evgeny
dea6675c21
Add HM3301 laser dust detection sensor (#963)
* Add HM3301 laser dust detection sensor

* Fixed after lint

* Fixed after lint

* added status clear warning
2020-04-06 14:11:41 -03:00
Guillermo Ruffino
43cf3063e0
removes comments from lambda (#998)
* removes comments from lambda

* include comments in lambda test

* pylint no else return
2020-04-05 22:14:49 -03:00
Bartłomiej Biernacki
4620ad6124
Support for pcd8544 (nokia 5110 and 3310) screen (#973)
* First version of working compontent for pc8544 screen

* Fixed lint errors

* Fixed lint errors #2
2020-04-04 18:23:23 -03:00
Germain Masse
4ec636c08f
Add AHT10 sensor (#949) 2020-03-21 15:31:07 -03:00
John
4cb30a22ac
Corrections to default register values of ATM90E32 component (#982)
* Corrections to default register values of ATM90E32 component
2020-03-13 10:27:19 -07:00
Tim Savage
c632b0e1d4
Unittests for esphome python code (#931) 2020-03-12 14:27:22 -07:00
Nicholas Peters
714d28a61a
Add TMP117 component (#992)
* Create TMP117 sensor component
2020-03-12 14:25:00 -07:00
Pavel
c60989a7be
pzemac total energy support (#933)
* add energy support in pzemac sensor

Co-authored-by: Sergio Mayoral Martinez <sergiomayoralmartinez@gmail.com>
Co-authored-by: t151602 <sergio.mayoralmartinez@telefonica.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2020-03-12 13:37:57 -07:00
Derek Hageman
11b727fdf7
SCD30 fixes and improvements (#962)
* SCD30 improvements
2020-03-11 17:39:40 -07:00
Evgeny
4402a6eb4c
Add TM1651 simple level, turn on, turn off actions (#920)
* Add TM1651 simple level action

* fixed brightness validation

* Updated lib, fixed import

* Added turn_on, turn_off actions

* Fixed after lint
2020-02-15 20:52:20 -03:00
Héctor Giménez
2d0d794a9d Daikin climate ir component (#964)
* Daikin ARC43XXX IR remote controller support

* Format and lint fixes

* Check temperature values against allowed min/max
2020-01-22 19:38:04 -03:00
Guillermo Ruffino
990a4d4774 Display tm1637 (#946)
* add TM1637 support
2020-01-13 14:44:55 -08:00