Previously we had NOTMUCH_DATABASE_MODE_READ_ONLY but
NOTMUCH_STATUS_READONLY_DATABASE which was ugly and confusing. Rename
the latter to NOTMUCH_STATUS_READ_ONLY_DATABASE for consistency.
Previously, many checks were deep in the library just before a cast
operation. These have now been replaced with internal errors and new
checks have instead been added at the beginning of all top-levelentry
points requiring a read-write database.
The new checks now also use a single function for checking and
printing the error message. This will give us a convenient location to
extend the check, (such as based on database version as well).
The original wording made it sound like this function was just doing
some string manipulation. But this function actually creates new
directory documents as a side effect. So make that explicit in its
documentation.
When a notmuch database is upgraded to the new database format, (to
support file rename and deletion), any message documents corresponding
to deleted files will not currently be upgraded. This means that a
search matching these documents will find no filenames in the expected
place.
Go ahead and return the filename as originally stored, (rather than
aborting with an internal error), in this case.
Similar to the return value of notmuch_database_add_message, we now
enhance the return value of notmuch_database_remove_message to
indicate whether the message document was entirely removed (SUCCESS)
or whether only this filename was removed and the document exists
under other filenamed (DUPLICATE_MESSAGE_ID).
Previously, adding a filename with the same message ID as an existing
message would do nothing. But we recently fixed this to instead add
the new filename to the existing message document. So update the
documentation to match now.
In the presentation we often omit citations and signatures, but this
is not content that should be omitted from the index, (especially
when the citation detection is wrong---see cases where a line
beginning with "From" is corrupted to ">From" by mail processing
tools).
This new directory ojbect provides all the infrastructure needed to
detect when files or directories are deleted or renamed. There's still
code needed on top of this (within "notmuch new") to actually do that
detection.
This commit contains my changes to the API proposed by Keith. Nothing
is dramatically different. There are minor things like changing
notmuch_files_t to notmuch_filenames_t and then various things needed
for completeness as noticed while implementing this, (such as
notmuch_directory_destroy and notmuch_directory_set_mtime).
This will allow applications to support the removal of messages, (such
as when a file is deleted from the mail store). No removal support is
provided yet in commands such as "notmuch new".
The existing find_doc_ids function is convenient when the caller
doesn't want to be bothered constructing a term. But when the caller
*does* have the term already, that interface is just wasteful. So we
export a lower-level interface that maps a pre-constructed term to a
document-ID iterators.
The code to map a filename to a direntry is something that we're going
to want in a future _remove_message function, so put it in a new
function _notmuch_database_filename_to_direntry .
The library interface is unchanged so far, (still just
notmuch_database_add_message), but internally, the old
_set_filename function is now _add_filename instead.
Instead of storing the complete message filename in the data portion
of a mail document we now store a 'direntry' term that contains the
document ID of a directory document and also the basename of the
message filename within that directory. This will allow us to easily
store multple filenames for a single message, and will also allow us
to find mail documents for files that previously existed in a
directory but that have since been deleted.
Some pending commits want the _split_path functionality separate from
mapping a directory to a document ID. The split_path function now
returns the basename as well as the directory name.
We're planning to have mail documents refer to directory documents for
the path of the containing directory. To support this, we need the
path in the data, (since the path in the 'directory' term can be
irretrievable as it will be the SHA1 sum of the path for a very long
path).
We'll soon have mail documents referring to their parent directory's
directory documents, so we'll need access to _find_parent_id in files
such as message.cc.
Storing the document ID of the parent of each directory document will
allow us to find all child-directory documents for a given directory
document. We will need this in order to detect directories that have
been removed from the mail store, (though we aren't yet doing this).
The recent change from storing absolute paths to relative paths means
that new directory documents will already be created, (and the old
ones will just linger stale in the database). Given that, we might as
well put a clean name on the term in the new documents, (and no real
flag day is needed).
We were already storing relative mail filenames, so this is consistent
with that. Additionally, it means that directory documents remain
valid even if the database is relocated within its containing
filesystem.
We'll soon be having multiple entry points that accept a filename
path, so we want common code for getting a relative path from a
potentially absolute path.
And fix the initialization such that the private enum will always have
distinct values from the public enum even if we similarly miss the
addition of a new public value in the future.
The function _notmuch_message_add_thread_id has been removed
from the private interface of notmuch. There's no reason for
one to keep a declaration of its prototype in the code base.
Also, lets update a commentary that referenced that function
and escaped from previous scrutiny.
Signed-off-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Since we need to do this for portability, (some systems don't have a
strndup function), we might as well do it unconditionally. There's
almost no disadvantage to doing so, and this has the advantages of not
requiring a configure-time check nor having two different
implementations, one of which would often be less tested.
We carefully noted the fact that we had locally allocated the string
here, but then we neglected to free it. Switch to talloc instead
which makes it easier to get the behavior we want. It's simpler since
we can just call talloc_free unconditionally, without having to track
the state of whether we allocated the storage for name or not.
This error was tirggered with a debugging build via:
make CXXFLAGS="-DDEBUG"
and reported by David Bremner. The actual error is that I'm an
idiot that doesn't know how to use strcmp's return value. Of
course, the strcmp interface scores a negative 7 on Rusty Russell
ranking of bad interfaces:
http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
As per Carl's request, this patch corrects the only value defined under
the notmuch_message_flag_t enum typedef to match the name of the type.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
If Xapian threw an exception on notmuch_query_count_messages the count
variable could be used uninitialized. Initialize count to solve the
problem.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
When _notmuch_thread_create() is given a query string, it can return more
messages than just those matching the query. To distinguish those that
matched the query expression, the MATCHING_SEARCH flag is set
appropriately.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
This patch allows for different flags, internal to notmuch, to be set on a
message object. The patch does not define any such flags, just the
facilities to manage these flags.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
This patch adds a new function that can be used to collect a list of
unique tags from a list of messages. 'notmuch search-tags' uses the
function to get a list of tags from messages matching a search-term,
but it has the potential to be used elsewhere so we put it in the lib.
Signed-off-by: Jan Janak <jan@ryngle.com>
This patch adds a new function called notmuch_database_get_all_tags
which can be used to obtain a list of all tags from the database
(in other words, the list contains all tags from all messages). The
function produces an alphabetically sorted list.
To add support for the new function, we rip the guts off of
notmuch_message_get_tags and put them in a new generic function
called _notmuch_convert_tags. The generic function takes a
Xapian::TermIterator as argument and uses the iterator to find tags.
This makes the function usable with different Xapian objects.
Function notmuch_message_get_tags is then reimplemented to call the
generic function with message->doc.termlist_begin() as argument.
Similarly, we implement notmuch_message_database_get_all_tags, the
function calls the generic function with db->xapian_db->allterms_begin()
as argument.
Finally, notmuch_database_get_all_tags is exported through
lib/notmuch.h
Signed-off-by: Jan Janak <jan@ryngle.com>
Xapian provides an interator-based interface to all search results.
So it was natural to make notmuch_messages_t be iterator-based as
well. Which we did originally.
But we ran into a problem when we added two APIs, (_get_replies and
_get_toplevel_messages), that want to return a messages iterator
that's *not* based on a Xapian search result. My original compromise
was to use notmuch_message_list_t as the basis for all returned
messages iterators in the public interface.
This had the problem of introducing extra latency at the beginning
of a search for messages, (the call would block while iterating over
all results from Xapian, converting to a message list).
In this commit, we remove that initial conversion and instead provide
two alternate implementations of notmuch_messages_t (one on top of a
Xapian iterator and one on top of a message list).
With this change, I tested a "notmuch search" returning *many* results
as previously taking about 7 seconds before results started appearing,
and now taking only 2 seconds.
Previously, notmuch_query_search_threads would do all the work, so the
caller would block until all results were processed. Now, we do the
work as we go, as the caller iterates with notmuch_threads_next. This
means that once results start coming back from "notmuch search" they
just keep continually streaming.
There's still some initial blocking before the first results appear
because the notmuch_messages_t object has the same bug (for now).
This was a poor workaround around the fact that the existing
notmuch_threads_t object is implemented poorly. It's got a fine
iterartor-based interface, but the implementation does all of the
work up-front in _create rather than doing the work incrementally
while iterating.
So to start fixing this, first get rid of all the hacks we had working
around this. This drops the --first and --max-threads options from the
search command, (but hopefully nobody was using them
anyway---notmuch.el certainly wasn't).
The rudimentary aspect here is that the date ranges are specified with
UNIX timestamp values (number of seconds since 1970-01-01 UTC). One
thing that can help here is using the date program to determins
timestamps, such as:
$(date +%s -d 2009-10-01)..$(date +%s)
Long-term, we'll probably need to do our own query parsing to be able
to support directly-specified dates and also relative expressions like
"since:'2 months ago'".
Getting the count of matching threads or messages is a fairly
expensive operation. Xapian provides a very efficient mechanism that
returns an approximate value, so use that for this new command.
This returns the number of matching messages, not threads, as that is
cheap to compute.
Signed-off-by: Keith Packard <keithp@keithp.com>
I configured my database.path with a trailing /, and after running notmuch
new every notmuch search would fail with error messages like this:
Error opening /inbox/cur/1258565257.000211.mbox:2,S: No such file or directory
The actual bug was in the filename normalization for storage in the
database. The database.path was removed from the full filename, but if
the database.path from the config file contained a trailing /, the
relative file name would retain an extra leading /... which made it look
like an absolute path after it was read out from the DB.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
