Add a simple test to the configure script to detect getline. It's not
important that the test run, just that it compiles and links without
any errors.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
We were missing an "override" directive in the assignment of CFLAGS
within Makefile.config so it was actually having no effect. Then, we
were also failing to get the proper include path for valgrind.h so
it wouldn't have worked even it were having effect. Fix both problems.
These were copied from the gnulib git repository as of:
commit 563c779682040ed4b89c9b4bbe428dcd8157c90a
They come under the GNU GPL v3 (or later) exactly as notmuch is
licensed.
Since we need to do this for portability, (some systems don't have a
strndup function), we might as well do it unconditionally. There's
almost no disadvantage to doing so, and this has the advantages of not
requiring a configure-time check nor having two different
implementations, one of which would often be less tested.
We carefully noted the fact that we had locally allocated the string
here, but then we neglected to free it. Switch to talloc instead
which makes it easier to get the behavior we want. It's simpler since
we can just call talloc_free unconditionally, without having to track
the state of whether we allocated the storage for name or not.
We had avoided using "echo -n" originally for portability concerns,
and instead just printed the same string in both conditions, (and
also printed the string late if any check took long). The word is
that printf is quite portable, so we use that instead.
It was problematic to have this in "make install" since it would
unconditionally try to install to /etc, (even if a non-privileged user
was attempting an install to a prefix in the user's home directory,
for example).
If the user is explicitly providing EOF, then terminating the program
is the most likely desired thing to do. This also avoids undefined
behavior from continuing with an uninitialized response after ignoring
the return value of getline().
Glibc (at least) provides the warn_unused_result attribute on write,
(if optimizing and _FORTIFY_SOURCE is defined). So we explicitly
ignore the return value in our signal handler, where we couldn't do
anything anyway.
Compile with:
make CFLAGS="-O -D_FORTIFY_SOURCE"
before this commit to see the warning.
This makes these keys different than 'q' in this mode, (where 'x'
and 'q' are identical in all of the other modes currently).
The idea here is to make it easier to do non-linear reading of messages,
(such as when poking in to read just one or two threads from a search
result that returned many threads).
The dynamic scoping of emacs lisp is such that we never want to assign
to any variable unless it's something we've defined with `defvar' or
else something we're using locally via `let'.
Our documentation is long enough that I think it will be more useful
to use an entire window for it (which is easily dismissed with 'q').
This is also kinder for a user not well-initiated with emacs, for
whom the multi-window help can be confusing.
Previously, we had some hard-coded keybindings mentioned in the
introductory paragraphs of the documentation for notmuch-search-mode.
Now, we take advantage of the substitute-command-keys functionality to
produce the same text by default, but to dynamically generate the
correct text in the face of the user customizing the keybindings.
As we did recently for notmuch-search-mode-map, ensure that the first
line of docuemntation for each command stands alone.
We also take advantage of the substitute-command-keys functionality
within notmuch-help so that the introductory paragraphs can talk
about key bindings by key (rather than function name) in a way that
will always be current even in the face of the user rebinding keys.
Previously, we would do only a single-level traverse of the keymap.
That meant that for a keybinding such as "M-TAB" we would just see
the prefix key ("ESC") and print that it was a keymap---never printing
the TAB nor the documentation for the command it is bound to.
Now, we do the full walk, constructing a proper description of the
full keybdinding with prefix characters, (and converting "ESC" to
"M-" for legibility).
Since notmuch-help now displays a single line of documentation from
each of these commands we ensure that the first line stands alone for
each command.
We also override some builtin commands with new commands that don't
behave any differently, but have our own notmuch-specific
documentation, (such as "select next thread" rather than "move point
to next line").
This broke when we switched to filter-based processing of search
results and added the "End of search results" line onto the end. Fix
to skip ignore that line when moving to the last thread.
When there's no more to scroll, we want to select the first thread.
This used to work, and I'm not sure when it broke, (perhaps when we
switched from post-process decorating of the search results to
filtering). Fix the calculation to work again.
The concept behind direct manipulation with mouse clicks is that
documentation shouldn't be necessary, (though my original motivation
here was simply that "<mouse-1>" was exceeding my TAB width.
This does cause a blank line to be added for the mouse binding. This
isn't directly desired, but as long as it's there we put it at a
natural place for a separator.
I had originally created this keymap in order from most important to
least important commands. But our new notmuch-help command is
presented with the list in the reverse order. So we reverse the input
so that the user sees the most important commands first.
This gives somewhat friendlier output for the '?' binding than we had
previously with `describe-mode'. First, we no longer have the various
minor modes cluttering up the output. Second the display of the
binding table uses the first line of documentation for the bound
function rather than the function name.
This silences a warning when compiling notmuch.el. The documentation
of beginning-of-buffer does say (rather emphatically) that it's not
to be used from lisp programs.
This error was tirggered with a debugging build via:
make CXXFLAGS="-DDEBUG"
and reported by David Bremner. The actual error is that I'm an
idiot that doesn't know how to use strcmp's return value. Of
course, the strcmp interface scores a negative 7 on Rusty Russell
ranking of bad interfaces:
http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
The previous location of autoload comments didn't seem to correspond
with the functions most likely to be the entry points for using
notmuch. This change adjusts them to match those likely entry points.
This patch use notmuch-tag-face showing tags in the notmuch-search-mode.
We can selectively highlight each tag by setting notmuch-tag-face-alist as below
(defface notmuch-tag-unread-face
'((((class color)) (:foreground "goldenrod")))
"Notmuch search mode face used to highligh tags.")
(defface notmuch-tag-inbox-face
'((((class color)) (:foreground "red")))
"Notmuch search mode face used to highligh tags.")
(setq notmuch-tag-face-alist '(("unread" . 'notmuch-tag-unread-face)
("inbox" . 'notmuch-tag-inbox-face)))
(require 'notmuch)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently we assume that all errors on stat() a dname is fatal (but
continue anyway and report the error at the end). However, some errors
reported by stat() such as a missing file or insufficient privilege,
we can simply ignore and skip the file. For the others, such as a fault
(unlikely!) or out-of-memory, we handle like the other fatal errors by
jumping to the end.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The most obvious bindings for save attachments are already taken. The
existing 'w' binding was bound to view the raw message. This commit
moves it to 'V' which still seems somewhat mnemonic and uses 'w' for
save (write) attachments.
Sometimes forwarding a message is preferable to replying and modifying
the set of recipients. This commit provides that ability using the
message-forward function.
The ability to temporarily create a buffer containing only the
contents of the currently selected message in notmuch show mode is
generally useful. This commit factors the majority of the code
required to do so out of notmuch-show-view-all-mime-parts into a macro
called with-current-notmuch-show-message and rewrites the original
function in terms of the macro.
A future set of commits will provide additional functionality using
the macro as well.
