Before the change, message and citation invisibility overlays
conflicted: if some citation is made visible and then the whole
message is hidden, that citation remained visible. This happened
because the citation's overlay has an invisible property which
takes priority over the message overlay. The message
invisibility spec does not affect citation visibility, it is
determined solely by the citation overlay invisibility spec.
Hence, if citation is made visible, it is not hidden by message
invisibility spec.
The patch changes citation overlay invisibility property to be a
list which contains both the citation and the message
invisibility specs. This makes the citation invisible if either
of them is added to the `buffer-invisibility-spec'. Note that
all citation visibility states are "restored" when the message
hidden and shown again.
Before the change, the `notmuch-show-insert-text/plain-hook' was
given only the `depth' argument. The patch adds another one -
the message. Currently, the new message argument is not used by
any on the hooks. But it will be used later to get access to
message invisibility specs when wash buttons are inserted.
The emacs bug is that isearch cannot search through invisible text
when the 'invisible' property is a list.
The patch adds `notmuch-isearch-range-invisible' function which
is the same as `isearch-range-invisible' but with fixed Emacs bug
#8721. Advice added for `isearch-range-invisible' which calls
`notmuch-isearch-range-invisible' instead of the original
`isearch-range-invisible' when in `notmuch-show-mode'.
This code treats top posted copies essentially like signatures, except
that it doesn't sanity check their length, since neither do their
senders.
New user-visible variables:
notmuch-wash-button-original-hidden-format
notmuch-wash-button-original-visible-format
Rebased-by: Carl Worth <cworth@cworth.org>
Mail-header-parse-address may fail for an invalid address.
Before the change, this would result in empty notmuch-show buffer
with an error message like: Scan error: "Unbalanced parentheses".
The patch wraps the function in condition-case and returns
unchanged address in case of error.
Most of the time, every entry in the list of identities has the same user name
part. It can then be filled in automatically, and the user can only be prompted
for the email address, which makes the interface much cleaner.
For message-fetch-field the buffer is expected to be narrowed to
just the header of the message. That is not the case when
notmuch-fcc-header-setup is run, hence a wrong header value may be
returned. E.g. when forwarding an
email, (message-fetch-field "From") returns the From header value
of the forwarded email.
Message-field-value is the same as message-fetch-field, only
narrows the buffer to the headers first.
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
(describe-face 'message-cited-text-face)
> message-cited-text-face is an alias for the face `message-cited-text'.
> This face is obsolete since 22.1; use `message-cited-text' instead.
Signed-off-by: Pieter Praet <pieter@praet.org>
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
jrollins modified this patch to conform to recent changes in the
crypto processing since this patch was originally sent in.
Write-region handles some file names specially, see Emacs Lisp
manual section 25.11 Making Certain File Names "Magic" [1]. This
is a nice feature for normal text editing, but it is not
desirable if we need to save raw file content (e.g. attachment).
In particular, this affects archives and may result in corrupted
attachments saved with notmuch-show-save-part (attachment button
click handler).
Turns out, smart GNUS folks encountered the same problem and
implemented write-region wrapper which inhibits some file name
handlers. In particular, this wrapper is used in mm-save-part,
which is why notmuch-save-attachments that uses it works fine
with archives.
The patch replaces write-region with mm-write-region in
notmuch-show-save-part. Also it removes coding-system-for-write
and require-final-newline setting in notmuch-show-save-part. The
former is set in mm-write-region. The latter seems to be
unneeded because mm-save-part does not use it.
[1] http://www.gnu.org/s/emacs/manual/html_node/elisp/Magic-File-Names.html
This is the best way to make the displayed output for
decrypted/verified messages clearer. The special sigstatus and
encstatus buttons are now displayed under the part header button. The
part header button is also tweaked to provide information to user
about how to proces crypto.
We probably shouldn't have been doing this anyway, but we do it here
specifically because we don't want the content of the
application/pgp-encrypted parts to be displayed and cluttering the
message show.
A new emacs configuration variable "notmuch-crypto-process-mime"
controls the processing of PGP/MIME signatures and encrypted parts.
When this is set true, notmuch-query will use the notmuch show
--decrypt flag to decrypt encrypted messages and/or calculate the
sigstatus of signed messages. If sigstatus is available, notmuch-show
will place a specially color-coded header at the begining of the
signed message.
Also included is the ability to switch decryption/verification on/off
on the fly, which is bound to M-RET in notmuch-search-mode.
This patch adds a customization variable that controls what queries
are used to construct the all-tags section in notmuch-hello. It allows
the user to specify a function to construct the query given a tag or
a string that is used as a filter for each tag.
It also adds a variable to hide various tags from the all-tags section.
Signed-off-by: Daniel Schoepe <daniel.schoepe@googlemail.com>
This adds functions and variables needed for this feature to be implemented.
Once it's done, the user will be able to use a prefix argument (e.g. pressing
C-u m instead of m) and be able to select a From address.
By default the list of names/addresses to be used during completion will be
automatically generated by the settings in the notmuch configuration file. The
user can customize the notmuch-identities variable to provide an alternate list.
This is based on a previous patch by Carl Worth
(id:"87wrhfvk6a.fsf@yoom.home.cworth.org" and follow-ups).
Before the change, save-excursion was used to save the point. But the
marker saved by save-excursion was inside a region that was deleted,
so that approach is unreliable, (leading to point jumping to a new
position past the button). This patch instead saves point in an
integer variable, and when restoring, carefully avoids moving point
past the button, (in case the new button label is shorter than the old
button label).
Before the change, citation and signature wash buttons used the
same label in both visible and hidden states. Sometimes it is
very convenient when you can determine if the text is hidden or
shown without reading the context and/or clicking the button.
The patch makes it easy to see if the text is shown or hidden by
explicitly saying what the button does (shows or hides the text).
This patch adds hooks that are run before/after messages are tagged
From the emacs interface. In order to implement this and to avoid
having hooks parse all the arguments to the notmuch binary again, I
created a `notmuch-tag' function that other modules should use instead
of running (notmuch-call-notmuch-process "tag" ...) directly.
The command-line interface for extracting a single part from a message
recently changed from:
notmuch part --part=X
to:
notmuch show --format=raw --part=X
Remove double quotes and flatten "foo@bar.com <foo@bar.com>" to
"foo@bar.com".
Edited-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net> (clean up
expected output for emacs tests).
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
This controls the appearance of collapsed messages in notmuch-show
mode, avoiding redundancy for repeated subject).
Remove `notmuch-show-always-show-subject'.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Typically used to allow a `text/html' renderer access to images which
are sent along with the HTML.
This is not enabled by default, instead the user must execute
`notmuch-show-setup-w3m' for it to take effect.
Edited-by: Carl Worth <cworth@cworth.org> Add documentation string for
notmuch-show-setup-23m and clean up warning about reference/assignment
of free variable.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Add a variable `notmuch-show-all-multipart/alternative-parts' that
allows the user to indicate that all candidate sub-parts of a
multipart/alternative part should be shown rather than just the
preferred part. The default is `nil', showing only the preferred part.
This is mostly a debugging aid.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Use code from icalendar.el to convert text/x-vcalendar parts to
something suitable for use with the Emacs diary.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Previously, notmuch show flattened all output, losing information
about the nesting of the MIME hierarchy. Now, the output is properly
nested, (both in the --format=text and --format=json output), so that
clients can analyze the original MIME structure.
Internally, this required splitting the final closing delimiter out of
the various show_part functions and putting it into a new
show_part_end function instead. Also, the show_part function now
accepts a new "first" argument that is set not only for the first MIME
part of a message, but also for each first MIME part within a series
of multipart parts. This "first" argument controls the omission of a
preceding comma when printing a part (for json).
Many thanks to David Edmondson <dme@dme.org> for originally
identifying the lack of nesting in the json output and submitting an
early implementation of this feature. Thanks as well to Jameson Graef
Rollins <jrollins@finestructure.net> for carefully shepherding David's
patches through a remarkably long review process, patiently explaining
them, and providing a cleaned up series that led to this final
implementation. Jameson also provided the new emacs code here.
This avoids the emacs lisp compiler from emitting warnings on this
replacement code, (which warnings would be hard for us to eliminate
since we didn't write the code but copied it verbatim from emacs 23).
With the previous commit, unexpected output before or between search results
would be displayed. However, trailing junk from the "notmuch search" output
would still be silently swallowed.
The most common case for an error message from "notmuch search" would be
an invalid command-line, and in that case, there would be no search results
and the trailing error message would get swallowed.
We fix the process sentinel to check for leftover data and add it to the
final buffer. We also add a test case to ensure this works.
This fixes the recently-added emacs-large-search-buffer test. This is
as simple as saving any trailing input and then pre-prepending it on
the next call.
MAny thanks to Thomas Schwinge <thomas@schwinge.name> for tracking
down this problem and contributing a preliminary version of this fix.
Rather than silently swallowing unexpected output, the emacs interface will now
display it. This will allow error messages to actually arrive at the emacs
interface (though not in an especially pretty way). This also allows for easier
investigation of the inadvertent swallowing of search results that span page
boundaries (as demonstrated by the recent added emacs-large-search-buffer test).
The page-boundary bug has been present since a commit from 2009-11-24:
93af7b5745
Many thanks to Thomas Schwinge for tracking that bug down and
contributing the test for it.
Such as:
mkdir build
cd build
../configure
make
This is implemented by having the configure script set a srcdir
variable in Makefile.config, and then sprinkling $(srcdir) into
various make rules. We also use vpath directives to convince GNU make
to find the source files from the original source directory.
The call-process to notmuch in notmuch-query.el was previously sending
stderr into the output buffer. This means that if there is any stderr
the JSON parsing breaks. Unfortunately call-process does not support
sending stderr to a separate buffer or to the minibuffer [0], but it
does support sending it to /dev/null. So we do that here instead.
[0] a bug was filed against emacs (#7842)
Previously, the user didn't know whether the pipe command succeeded or
not. It was only possible to find it out by manually inspecting
the work done (or not done) by the command or by manually switching to
*notmuch-pipe* buffer and determine it from command output. For this
the user had to first find the text corresponding to the last run of
pipe command as the buffer accumulated the output from all pipe commands.
This patch changes the following. The *notmuch-pipe* buffer is erased
before every pipe command so it contains only the output from the last
command. Additionally, when the command failed, the *notmuch-pipe* buffer
is shown and an error message is displayed.
with the output of pipe command.
add --bashcompletiondir and --zshcompletiondir (like --emacslispdir) to choose
installation dir for bash/zsh completion files
Make some features optional:
--without-emacs / --with-emacs=no do not install lisp file
--without-bash-completion / --with-bash-completion=no do not install bash
files
--without-zsh-completion / --with-zsh-completion=no do not install zsh files
By default, everything is enabled. You can reenable something with
--with-feature=yes
The removed expressions, which were used to ensure that citations were
both preceded and followed by a blank line, were poorly implemented
and caused a regexp stack overflow on messages more than a few
thousand lines long.
Incremental search does not match strings that span a
visible/invisible boundary. This results in failure to correctly
isearch for authors in `notmuch-search' mode if the name of the author
is split between the visible and invisible components of the authors
string. To avoid this, attempt to truncate the visible component of
the authors string on a boundary between authors, such that the
entirety of an author's name is either visible or invisible.
Appease the test suite by using the true name for the Fcc directory
path, otherwise a value for `notmuch-database-path' which includes
symbolic links causes test suite failures.
Emacs22 lacks apply-partially and mouse-event-p, so define them if emacs
version is less than 23. With this change, I was able to begin using
notmuch in emacs22.
The definitions of apply-partially and mouse-event-p are copied from
the emacs 23 distribution, (which is distributed under the GPLv3+ just
as notmuch).
Explained-by: Carl Worth: This gives convenient keybindings for
navigating the file and for quitting from the buffer, (since, with a
raw message file the user will generally want to just view the
message, not edit it).
This add a "stash-map" for search-mode, just like in show-mode, and
adds one function, bound to "i" to stash the thread-id of the current
selected thread.
Couldn't think of the correct way to stash other thread info, so I
didn't add any other stash functions for now.
Here we move the notmuch-show/notmuch-show-do-stash function to
notmuch-lib/notmuch-common-do-stash. Nothing in this function is
notmuch-show mode specific, so this move will make it cleaner to be
used by other modes (such as notmuch-search).
Re-work the declaration and definition of `notmuch-fcc-dirs'. The
variable now allows three types of values:
- nil: no Fcc header is added,
- a string: the value of `notmuch-fcc-dirs' is the name of the
folder to use,
- a list: the folder is chosen based on the From address of the
current message using a list of regular expressions and
corresponding folders:
((\"Sebastian@SSpaeth.de\" . \"privat\")
(\"spaetz@sspaeth.de\" . \"OUTBOX.OSS\")
(\".*\" . \"defaultinbox\"))
If none of the regular expressions match the From address, no
Fcc header will be added.
Remove 're: ' or 'Re: ' from anywhere within a subject line rather
than just at the beginning. This is to accommodate threads where a
mailing list sometimes inserts a subject prefix.
For example, if a thread has the subjects:
[Orgmode] org-indent, org-inlinetask: patches on github
Re: [Orgmode] org-indent, org-inlinetask: patches on github
[Orgmode] Re: org-indent, org-inlinetask: patches on github
the last of these would not have been considered the same and would
therefore have been shown.
kill-this-buffer appears to be a function intended specifically for
use in the menu bar, and causes problem killing notmuch buffers when
multiple frames have been used. This patch replaces kill-this-buffer
with notmuch-kill-this-buffer, which in turn just simply calls
(kill-buffer (current-buffer)).
This is part of an effort to avoid proliferation of excessive
top-level notmuch commands. Also, "raw" better captures the
functionality here, (as opposed to "cat" which is a fairly oblique
reference to a bad Unix abbreviation whose metaphor doesn't work here
since "notmuch cat" operates only on a single message and hence cannot
"con'cat'enate" anything).
This patch modifies the following commands to access the messages via
cat subcommand:
- view/save attachments ('v', 'w'),
- view a raw message ('V') and
- pipe a message to a command ('|').
With this patch, it is straightforward to use notmuch emacs interface
with a remote database accessed over SSH. To do this, it is sufficient
to redefine notmuch-command variable to contain the name of a script
containing:
ssh user@host notmuch "$@"
If the ssh client has enabled connection sharing (ControlMaster option
in OpenSSH), the emacs interface is almost as responsive as when
notmuch is invoked locally.
Without this little patch notmuch fails if asked to display a saved
search that has zero results
Edited-by: David Edmondson <dme@dme.org>: With code that is a little
more "emacsy".
Re-write `notmuch-search-color-line', with the following improvements:
- create overlays only if they will be needed,
- merge the properties specified for a tag on top of any matching a
previous tag.
Remove them from non-top-level entry points, (such as the functions to
set notmuch modes and the deprecated notmuch-folder function). And add
one to the notmuch-hello function. Also, add missing documentation
string to notmuch-hello.
I don't see copy-seq documented within emacs at all, and some users
have encountered failures of the form:
notmuch-show-del-tags-worker: Symbol's function definition is void: copy-seq
This should eliminate that problem.
The original code was intended to work, but clearly wasn't tested. Use
mail-header (as in existing code) to extract a header from a header alist.
This fixes the duplicate-from-line bug that is exercised by the test
just added to the test suite.
Yet another case of "how could this have possibly worked before?!".
I guess we were just getting very lucky with the emacs lisp calling
conventions and what happens with extra arguments, but, ick! Much
better now.
As the emacs compiler warns, the goto-line function is only intended for
interactive use. Instead use the approach recommended in the goto-line
documentation to avoid this.
This is one of those cases where the warning looks absolutely correct,
(complaining about a free variable), but I'm left wondering how the
original code could have worked at all.
From what I can tell, this code wasn't actually being called by any
of the current code in notmuch.
The GNU Emacs Lisp Reference Manual section D.1 says:
> * Please don't require the cl package of Common Lisp extensions at
> run time. Use of this package is optional, and it is not part of
> the standard Emacs namespace. If your package loads cl at run time,
> that could cause name clashes for users who don't use that package.
>
> However, there is no problem with using the cl package at compile
> time, with (eval-when-compile (require 'cl)). That's sufficient for
> using the macros in the cl package, because the compiler expands
> them before generating the byte-code.
Follow this advice, requiring the following changes where `cl' was
used at runtime:
- replace `rassoc-if' in `notmuch-search-buffer-title' with the `loop'
macro and inline code. At the same time find the longest prefix
which matches the query rather than simply the last,
- replace `union', `intersection' and `set-difference' in
`notmuch-show-add-tag' and `notmuch-show-remove-tag' with local code
to calculate the result of adding and removing a list of tags from
another list of tags.
Call notmuch-fcc-header-setup from message-header-setup-hook rather
than message-send-hook. This allows you to see what's going to
happen, and to make manual adjustments if desired. Gnus does
something similar.
Signed-off-by: Rob Browning <rlb@defaultvalue.org>
Now that the FCC code is fixed to use the notmuch database path, we can
actually enable this by default, which should be highly useful for all
new users of notmuch.
Otherwise, FCC is too hard to use, (user must set it and also set message-
directory variable to match notmuch mail datbase path). As a rule, I'd like
for users of notmuch to not be required to muck around with non-notmuch
mail settings in emacs.
The above is only really possible now thanks to the recent addition of the
"notmuch config get" command which allows emacs to query the currently
configured notmuch database path.
This also now allows an absolute-path FCC to be set if desired.
If Xapian sees unquoted ".." as in id:123..456 then it thinks that's a
range specification. We avoid this problem by instead passing
id:"123..456" to Xapian.
That is, a subject with a bracketed set of digits (and optionally a
slash), for example "[2010]" would cause the emacs code to misparse
the search results. Fix this by tweaking the regular expression.
We extend the '|' command so that passing a prefix argument, (for
example, "C-u |"), causes it to pipe all open messages in the current
thread rather than just the single, current message.
This was previously wrapped for unsubtituted command names. It looks
much better in the notmuch-help (available with '?') if wrapped
according to the length of the substituted command names.
Rather than discarding authors when truncated to fit the defined
column width, mark the text beyond the end of the column as invisible
and allow `isearch' to be used over the text so hidden.
This allows us to retain the compact display whilst enabling a user to
find the elided text.
Add `notmuch-show-relative-dates' to control whether the summary line
in `notmuch-show' mode displays relative dates (e.g. '26 mins. ago') or
the full date string from the message. Default to `t' for
compatibility with the previous behaviour.
Shift-TAB is standard "opposite" of TAB -- in GUI interfaces they
typically cycle through input elements in opposite orders -- so it
makes sense to behave the same way.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Insert a separator every three digits when outputting numbers. Allow
the user to choose the separator by customizing
`notmuch-decimal-separator'. Widen the space allocated for message
counts accordingly.
This lets us pick up later changes to widget-keymap if the user
customizes it in some way. This is the recommended way to use
`widget-keymap', according to its help.
This enables the nifty '?' key binding to work in notmuch-hello
(although for some strange reasons I don't see any descriptions for
specific key bindings yet. Not sure how that is supposed to work
though.
But this starts, runs and behaves identical to the existing code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
In notmuch-mua-reply we were filtering out the Subject and To headers
manually in a loop, but message mode offers a nice function for
exactly that. Simplify the code by using it. Also, as notmuch-mua-mail
already sorts and hides headers that we want sorted and hidden, we can
safely remove those 2 functions from here as well. Also remove the
(require 'cl), the only reason for its existence was the now removed
"loop" function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Add `notmuch-column-control', which has three potential sets of
values:
- t: automatically calculate the number of columns per line based on
the tags to be shown and the window width,
- an integer: a lower bound on the number of characters that will be
used to display each column,
- a float: a fraction of the window width that is the lower bound on
the number of characters that should be used for each column.
So:
- if you would like two columns of tags, set this to 0.5.
- if you would like a single column of tags, set this to 1.0.
- if you would like tags to be 30 characters wide, set this to
30.
- if you don't want to worry about all of this nonsense, leave
this set to `t'.
Add face declarations for the date, count, matching author and subject
columns in search mode and apply those faces when building the search
mode display.
Approved-by: Jameson Rollins <jrollins@finestructure.net>
In search mode some messages don't match the search criteria. Show
their authors names with a different face - generally darker than
those that do match.
In the common case that a user only has one FCC (save outgoing mail in
the Mail directory, it is now possible to simply configure a string
such as "Sent" in the notmuch-fcc-dirs variable. More complex options,
depending on a users email address, are possible and described in the
variable customization help text.
The whole function notmuch-fcc-header-setup has been cleaned up a
little while working on that.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
- If no saved searches exist or are displayed, don't signal an error,
- If no saved searches exist or are displayed, leave the cursor in the
search bar,
- Minor layout improvements.
The fcc code would only initialize if notmuch-fcc-dirs was set. This was
a problem if you reset the variable, or added the variable later during
initialization. Now we always add the fcc hook, but it doesn't do
anything unless notmuch-fcc-dirs are set.
Add a (require 'notmuch-message) to notmuch.el. This is for functions that
specifically target message mode (and, in the future, notmuch-message
mode).
Add `notmuch-message-mark-replied', a function for automatically tagging
replied messages with user-defined tags. The tags (which can be either
added or removed) can be customized with the customization variable
`notmuch-message-replied-tags'. This is a simple list of strings. Any
string prefaced with a "-" will be removed; any string prefaced with a "+"
(or neither "+" nor "-") will be added.
This adds a new file notmuch-message.el, for functions which target
message mode (and in the future, notmuch-message mode). Based on some
conversation, notmuch-message.el will probably end up subsuming
notmuch-mua.el, but until we figure out exactly how we want to do that,
they will remain separate files.
Edited-by: Carl Worth <cworth@cworth.org>: Remove trailing whitespace
and add newline at end of file.
Detect inline patches and convert them to fake attachments, in order
that `diff-mode' highlighting can be applied to the patch. This can be
enabled by customising `notmuch-show-insert-text/plain-hook'.
The fix in 1e18711543 broke end-of-row
wrapping when drawing the table of tags/saved searches. Fix that and
improve the readability of the matrix reflection code to hasten future
debugging.
If the 'all tags' section of the hello buffer will not be shown, don't
consider those tags when determining the number of saved searches that
can be displayed on a single line.
Re-working the saved search/tag insertion to buttonize only the name
of the saved search/tag plus one space broke the calculation of how
much filler is required to complete the column, resulting in lines
wider than the window.
It's possible that the user has instructed message-mode to use some
other separator. If so, then that's what we should look for when
looking for the signature.
Thanks to David Edmondson <dme@dme.org> for pointing this out.
If the user specifies a maildir that does not exist, prompt the user to
see whether a maildir should be created. This will fail, with the
relevant explanation, if the location is not writable, or if a file
already exists in that location. If the location is a dir, but not a
maildir, this will add /tmp/cur/new to it.
Throw an error after the maildir is generated but before the message
is sent. This change allows the user to edit the maildir if it fails,
so that it will point to a correct place.
Note that this changes the previous behavior which always overwrote
the existing Fcc line. Now, an Fcc line is only auto-generated if
there isn't one already there.
The ideal change would be to prompt to create a maildir. This should
enable a place for doing that in a future patch.
The complete-string matching of commit
f2ebe3ac44
defeats the substitution of partial search
strings when the user manually types a
long search string that just happens to
partially match a saved search.
For example, typing "tag:inbox and not tag:foo"
should result in "[inbox] and not tag:foo" but
this has been broken since that commit.
As a compromise between this feature and what the
commit was trying to achieve, we now reverse the
saved-searches list before looking for a match.
This happens to work for me, but won't necessarily
work in general.
What we really want is the longest match, but rassoc-if
just gives us the first match. All of this is just about
creating slightly nice search-buffer names. So if anyone
really cares about making the names *even* nicer, then
they could improve this further.
I happen to have a lot of saved searches that are variants of the
tag:inbox search, (such as "tag:inbox and tag:notmuch"). The logic for
these was always matching inbox first, resulting in "[ inbox ] and
tag:notmuch" rather than "notmuch" as desired.
Anchor the regular expression on both ends to make it look harder for
the better match.
We are asserting that the new notmuch-hello implementation, (available
by just calling `notmuch') is just as easy to use as the old
notmuch-folder. So let's remove what's now a largely redundant
implementation.
To make this transition easier, we are still supporting the
notmuch-folders variable name, and we still provide `notmuch-folder'
as an alias which can be invoked to get the new notmuch-hello
functionality.
Previously, this was calling into a notmuch-folder-count
function. Only, everything related to notmuch-folder is about to go
away, so lets have notmuch-hello define its own function
(notmuch-saved-search-count) for this purpose.
We use this function to abstract away the common 3-step process for
looking for a value for the saved-searches variable:
1. Look at the notmuch-saved-searches variable itself
2. Look at the notmuch-folders vaiable
3. Use a default value
We were already using this logic (open-coded) in notmuch-hello, but
notmuch.el was accessing notmuch-folders directly for the clever name
selection of search buffers.
I'm planning to rip out the notmuch-folder-mode completely. So as a
token kindness to existing users of notmuch-folders, I'm at least
making notmuch-hello support the notmuch-folders variable name as an
alternate for the new name of notmuch-saved-searches.
We've recently changed things so that the notmuch-hello screen is the
default view one gets by executing `notmuch'. So hide the "hello" name
from everything exposed in the customize interface, (leaving "hello"
as just an internal name within the implementation).
After the previous commit, toggling the visibility of tags could
result in notmuch-hello aborting with:
Wrong type argument: wholenump, -1
At least, the error only occurred for me when making tags visible. But
that may be because my longest tag name is longer than my longest
saved-search name.
After isearching for an entire saved-search name, the point will be
immediately after that name in the buffer. Before commit
c9ba61bebe the space right after the
name was part of the widget so the user could press RET right after
the isearch to activate the saved search.
The above commit broke that functionality. Restore it by including a
single space after each name as part of the widget.
And off by default. There's a notmuch-hello-show-tags option in
customize to toggle the default setting, as well as buttons to
persistently toggle the visibility for the current session.
I have enough tags in my database that it's quite a bit faster for
notmuch-hello to come up without showing the tags.
Previously, we preserved the current position only when returning to
the notmuch-hello buffer or when refreshing it. Fix to also preserve
the position when directly invoking notmuch-hello, (such as from a
global keybinding).
This give us a useful active widget by default, ("inbox"), and
otherwise gives the first saved search in the user's customized
list. Not having point on the search bar means that the various
keybindings are all available.
This command was previously written under the fragile assumption that
the search bar was always the third widget. That's no longer true with
the saved searches now appearing before the search bar, so we save the
position of the search bar and go directly to it now.
Once users start using saved searches regularly, it's expected that
these will become the primary access points to mail. So give them a
priority position in the buffer.
When we go into a search, and then later quit and return to the
notmuch-hello buffer, we want the point to remain in the same position
it was in when we left. So we have to call the position-remembering
notmuch-hello-update rather than notmuch-hello from the continuation.
Before refreshing, we check which widget we are currently on, (or look
for the next widget), and then we watch for that same widget to go by
when constructing the buffer contents. Finally, we jump to the
position we saw when the widget went by.
Previously, trailing spaces after each saved-search name were included
as part of the widget. This is going to be problematic for a future
change that will extract the widget's value and compare it to the
configured names of saved searches.
Instead, just include the name itself in the widget, and then insert
the spaces for separation afterwards.
The existing code inserts the signature before inserting the message
body (which it puts at the very end of the buffer - therefore AFTER
the signature). This little snippet makes us search backwards and
insert the message body before a signature, if it exists.
This also fixes a small indentation issue in David's code.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Previously this was just a message that was almost impossible for the
user to see. Now, the user gets to see the error message, and is
presented with a buffer that actually contains the Fcc header of
interest.
I have gone wild and added a defcustom "notmuch-fcc-dirs".
Depending on the value of that variable we will not do any
maildir fcc at all (nil, the default), or it is of the format
(("defaultsentbox")
("full name <email@address>" . "Work/sentbox")
("full name2 <email2@address2>" . "Work2/sentbox"))
The outbox name will be concatenated with the message mode
variable "message-directory" which is "~/Mail/" by default.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1)use insert-buffer-substring
Rather than the insert-buffer. Emacs complains that it is for interactive use
and not for use within elisp. So use insert-buffer-substring which does the
same thing when not handed any 'begin' 'end' parameters.
2)replace caddr with (car (cdr (cdr)))
The former requires 'cl to be loaded and during make install emacs complained
about not knowing it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Require notmuch-maildir-fcc and also install it.
Rename all jkr/* functions to notmuch-maildir-fcc-*
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When completing an address, tell the user how many addresses in the
database matched the query.
Edited-by: Carl Worth <cworth@cworth.org>: Removed a stray numeric
literal that was causing a compiler warning.
Reviewed-by: Carl Worth <cworth@cworth.org>
This variable was moved from notmuch.el to notmuch-lib.el some time
ago, but the declaration in notmuch.el was left around. Clean that up.
Reviewed-by: Carl Worth <cworth@cworth.org>
The notmuch-hello functionality is now sufficiently useful that we
want to make it the default view of notmuch for new users. This also
effectively hides the "hello" name from the user, so we'll be free to
change that in the implementation if necessary.
This change also shuffles the requires between notmuch.el and
notmuch-hello.el. This fixes things so that our documented (require
'notmuch) is sufficient for getting the notmuch-hello functionality.
Finally, the shuffling caused the notmuch-search-oldest-first variable
from one file to the other. While doing that, give this variable the
defcustom treatment for easier customization.
When determining whether or not to re-align the head of the current
message with the top of the window, use `count-screen-lines' rather
than `count-lines' to allow for invisible text in the preceding
message. When comparing that number of lines against
`next-screen-context-lines', realign if the number of lines of the
previous message visible is 'smaller than or equal to' rather than
just 'smaller than' to improve usability.
For composing new messages and forwarding, leave the cursor on the
'To:' field. For replies, leave the cursor at the start of the
body. In all cases, mark the buffer as not modified so that the user
is not prompted if she decides to immediately kill the buffer.
Add:
- notmuch-wash-wrap-long-lines: Wrap lines longer than the width of
the current window whilst maintaining any citation prefix.
- notmuch-wash-tidy-citations: Tidy up citations by:
- compress repeated otherwise blank citation lines,
- remove otherwise blank citation lines at the head and tail of a
citation,
- notmuch-wash-elide-blank-lines: Compress repeated blank lines and
remove leading and trailing blank lines.
None of these is enabled by default - add them to
`notmuch-show-insert-text/plain-hook' to use.
Reviewed-by: Carl Worth <cworth@cworth.org>: I previously committed a
stale version of this patch.
"notmuch-address.el" tries to be careful to insinuate itself into
message mode only if it will do something useful, so it's safe to load
it all of the time.
Set `buffer-invisibility-spec' to `nil' (a list) if it is just `t'
before inserting any body parts, otherwise removing items from
`buffer-invisibility-spec' (which is what
`notmuch-show-headers-visible' and `notmuch-show-message-visible' do)
is a no-op and has no effect. This caused threads with only matching
messages to have those messages hidden initially because
`buffer-invisibility-spec' stayed `t'.
Avoiding adding the same search string to the 'recent searches' list
more than once by testing whether the string was already used with
`member' rather than `memq'.
The notmuch logo uses transparency. That can display poorly when
inserting the image into an emacs buffer (black logo on a black
background), so force the background colour of the image. We use a
face (`notmuch-hello-logo-background') to represent the colour so that
`defface' can be used to declare the different possible colours, which
depend on whether the frame has a light or dark background.
Add:
- notmuch-wash-wrap-long-lines: Wrap lines longer than the width of
the current window whilst maintaining any citation prefix.
- notmuch-wash-tidy-citations: Tidy up citations by:
- compress repeated otherwise blank citation lines,
- remove otherwise blank citation lines at the head and tail of a
citation and remove blank lines between attribution statements and
the citation,
- notmuch-wash-compress-blanks: Compress repeated blank lines and
remove leading and trailing blank lines.
Enable `notmuch-wash-tidy-citations' and
`notmuch-wash-compress-blanks' by default by adding them to
`notmuch-show-insert-text/plain-hook'. `notmuch-wash-wrap-long-lines'
is not enabled by default.
If `notmuch-wash-wrap-long-lines' is enabled, word wrapping of the
buffer leads to an unappealing display of text, so provide a function
to disable it and add it to the list of `notmuch-show-mode' hook
functions.
Add an `isearch-open-invisible' property to the overlays used to hide
citations and signatures, together with an appropriate function to
leave the invisible text visible should that be required.
This isn't ideal for me personally, since I usually want to inovke a
saved search rather than entering a new search textually. But it's at
least better than just putting point in the upper-left corner where it
doesn't do anything.
And similarly for notmuch-show-headers-visible to
notmuch-message-headers-visible.
I've never liked notmuch-show as a namespace prefix, but it looks
especially bad when it appears as "Notmuch Show Headers Visible" in
the customize buffer. Give nicer names to these variables which are
exported for user manipulation.
A tool `notmuch-addresses' is required to produce addresses which
match a query string. An example of a suitable script can be found in
the git repository at
http://jkr.acm.jhu.edu/git/notmuch_addresses.git
There are no doubt others.
The function was named and documented incorrectly before, saying that
it would "change the visibility of all messages". Instead it only
opens the messages that are closed---it doesn't simultanesously close
the messages that are open. (Granted, nobody would *want* that
behavior I don't think, but the naming was confusing before.)
`notmuch-show-toggle-all' changes the visibility all of the messages
in the current thread. By default it makes all of the messages
visible. With a prefix argument, it makes them all not visible.
Commit 44982ab332 added some extra
quoting when constructing a search. A previous version of this patch
had used single-quotation marks (') while this version used
double-quotation marks (").
The intent of the extra quoting was to allow notmuch-command to be set
to a script invoking ssh.
What actually happens, however is that the extra quotation marks make
it all the way into the query string seen by Xapian. And the double
quotes trigger phrase searching, (which isn't desired here). The
side-effect of that is that the emacs code would fallback to an
unqalified query and display all threads with all messages open.
We fix that side-effect now by using single-quote characters, but
we'll want a better fix in the future to avoid Xapian seeing these
characters at all I think.
Define a new `mail-user-agent' (`notmuch-user-agent') and use it by
default. Re-arrange various routines that send mail to use this
(compose, reply, forward). Insert a `User-Agent:' header by default.
This is the real commit for this functionality this time. The
previous attempt to merge this code:
commit 57926bc7b0
was botched (by Carl Worth, not David) to include only the Makefile
change. So the build was broken until this commit that actually adds
the new file.
Sebastian pointed out that the pre-JSON UI would move the cursor to
the end of the buffer if `n' or `N' is hit when on the last (unread)
message. Mimic that behaviour in the new UI.
Define a new `mail-user-agent' (`notmuch-user-agent') and use it by
default. Re-arrange various routines that send mail to use this
(compose, reply, forward). Insert a `User-Agent:' header by default.
Fix missing argumen in declaration of notmuch-search function and add
a definition of notmuch-search-continuation to avoid warning about
assignment to a free variable.
This is based on the prototype that Carl Worth described in the TODO
file. It provides a search bar as well as support for recent searches,
saved searches, and a list of all tags in the database (as well as the
number of messages with each tag).
The width of the authors field in search output was previously
specified in two places:
- `notmuch-search-authors-width': the limit beyond which the authors
names are truncated,
- `notmuch-search-result-format': the layout of the search results.
Changing the configuration of one of these may have required the user
to know about and adapt the other accordingly. This led to confusion.
Instead, remove `notmuch-search-authors-width' and perform truncation
based on the relevant field in `notmuch-search-result-format'.
Approved-By: Jameson Rollins <jrollins@finestructure.net>
With defcustom the user can easily find this variable (and its
documentation) within "M-x customize-group" "notmuch" (though finding
*that* is still tricky).
The new name of notmuch-poll-script is also easier to remember, (for
me at least).
Emacs scoping rules strongly encourage us to have fully-namespaced
function names. A prefix like "notmuch-search" is a pretty ugly
namespace name, but it's what we have for now.
The new functions first check if an external poll script has been defined in
the variable 'notmuch-external-refresh-script and if yes, runs that script
before executing the existing refresh function (which is bound to '=')
This can be used to have 'G' mimic the mutt behavior of polling an external
mail server - or if the mail polling is already automatic, it can trigger
the call to notmuch new and any necessary automatic tagging of new email.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
As the user has already defined aliases for certain searches in
notmuch-folders, search buffer names that use these aliases will
be easier to identify.
This patch helps in customizing search result display similar to
mutt's index_format. The customization is done by defining an alist as
below:
(setq notmuch-search-result-format '(("date" . "%s ")
("authors" . "%-40s ")
("subject" . "%s ")))
The supported keywords are date, count, authors, subject and tags.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: David Edmondson <dme@dme.org>
Use the mailcap functionality to guess a MIME type for attachments of
type application/octet-stream and, presuming successful, feed the
attachment back into the display code with the determine type.
This is mostly useless at the moment, as the JSON output from notmuch
does not include the content of application/octet-stream parts, so
they cannot be displayed even if the guess is a good one.
If a text/plain part is not the first part in a message, add a label
in order that a user can see that multiple parts are present.
If a part has a 'filename' attribute, include it in any label
describing the part.
In the recent switch to a JSON-based emacs interface, RET now toggles
message visibility anywhere in the message, (rather than only on the
summary line). So we no longer need this separate "b" binding for this.
Additionally, the body toggle was implemented independently from RET,
so after hiding a message with "b" one could not make it visible with
RET. This confusing state is now no longer possible, (since the
:body-visible property is removed entirely).
This reverts commit fbec989fe3.
I only pushed this accidentally. See message
id:871ver6u9r.fsf@yoom.home.cworth.org for the various reasons I
didn't like this patch, (mostly I think the association of 'F' is
wrong).
With the recent addition of "*" being a special case for a search
matching all messages, we have to take care when doing a filter
operation. In this case it's not legal to simply append and get:
* and <some-new-search-terms>
Instead we carefully construct a new search string of only:
<some-new-search-terms>
This could all be avoided if we had a parser that could understand
"*" with the meaning we want.
Clean up code duplication, as per Carl's suggestion, by making
notmuch-search-{add/remove}-tag-thread a special case of the -region
commands, where the region in question is between (point) and (point).
There was a bug in notmuch-search-{add,remove}-tag-region, which would
not behave correctly if the region went beyond the last message. Now,
instead of simply iterating to the last line of the region, these
functions will iterate to the minimum of the last line of the region
and the last possible line, i.e.
(- (line-number-at-pos (point-max)) 2)
Tested-by: Carl Worth <cworth@cworth.org> Note that the old, buggy
behavior included infinite loops of emacs lisp code, so the new
behavior is significantly better than that.
Put single-quotes around the argument of the `show --entire-thread' command
in notmuch-show. This change should have no effect on normal usage.
However, it allows us to use the notmuch.el client with a remote notmuch
binary and database over ssh (by, e.g., setting `notmuch-command' to a
simple shell script). Without the quotes, ssh will not send the command
properly.
One very simple example script is as follows. (Note that it requires
keypair login to the ssh server.)
#!/bin/sh
SSH_BIN="/path/to/local/ssh"
NOTMUCH_HOST="my.remote.server"
NOTMUCH_REMOTE_PATH="/path/to/remote/notmuch"
$SSH_BIN $NOTMUCH_HOST $NOTMUCH_REMOTE_PATH $@
These commands act on all messages in the thread, not simply those
that match the search. (There are use case for both behaviors, but the
documentation must match the behavior that's actually implemented).
This patch adds `-region' versions of the `notmuch-search-' commands to find
properties. It also splits up `notmuch-add/remove-tags' into both a
`-thread' and a `-region' version. (This makes us modify
`notmuch-search-archive-thread' to use the
`notmuch-search-remove-tag-thread' function, instead of
`notmuch-search-remove-tag', for consistency.) The add/remove-tag command
called by pressing `+' or `-' will then choose accordingly, based on whether
region is active.
This version fixes a couple of errors in the first version, which led to
incorrect marking of some tags in the search view (though the actual
tagging was still correct). It's also based on current master.
I'm not sure any more if region selection is actually the correct way to
do this, or if a mutt-style message-marking method would be better. But
I didn't want a buggy incorrect version out there.
As put forth in the commit that enabled this functionality, the last
few lines of a citation are often much more important. In that case,
let's actually do the useful thing by default.
In many conversations the last few lines of a citation are more
interesting than the first few lines, hence allow those to be shown if
desired.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Arbitrary font faces can be specified for given thread tags. By
default, no coloring is applied. To specify coloring, place something
like this in your .emacs:
(setq notmuch-search-line-faces '(("delete" . '(:foreground "red"))
("unread" . '(:foreground "green"))))
Order matters: line faces listed first will take precedence (in the
example above, a thread tagged both "delete" and "unread" will be
colored red, since the "delete" face is listed before the "unread").
notmuch.el | 33 ++++++++++++++++++++++++++++++++-
1 files changed, 32 insertions(+), 1 deletions(-)
Change the buffer name to a uniquified subject of the thread (i.e. the
subject of the first message in the thread) instead of the thread-id. This
is more meaningful to the user, and will make it easier to scroll through
numerous open buffers.
Note that this patch adds an optional `buffer-name' argument to notmuch
show.
Signed-off-by: Jesse Rosenthal <jrosenthal@jhu.edu>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The date was unfairly left out of getting pretty colors in the
notmuch-show header display. This fixes that grave injustice.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Instead, simply byte-compile the emacs source files as part of "make"
and install them as part of "make install". The byte compilation is
made conditional on the configure script finding the emacs binary.
That way, "make; make install" will still work for someone that doesn't
have emacs installed, (which was the only reason we had made a separate
"make install-emacs" target in the first place).
With the original quiet function, there's an actual purpose (hiding
excessively long compiler command lines so that warnings and errors
from the compiler can be seen).
But with things like quiet_symlink there's nothing quieter. In fact
"SYMLINK" is longer than "ln -sf". So all this is doing is hiding the
actual command from the user for no real benefit.
The only actual reason we implemented the quiet_* functions was to be
able to neatly right-align the command name and left-align the arguments.
Let's give up on that, and just left-align everything, simplifying the
Makefiles considerably. Now, the only instances of a captialized command
name in the output is if there's some actually shortening of the command
itself.
Initially this file provides one main function
notmuch-query-get-threads, which takes a set of search terms, and
returns a parsed set of matching threads as a lisp data structure.
A set of notmuch-query-map-* functions are provided to help map
functions over the data structure.
The function notmuch-query-get-message-ids uses this machinery to get
the set of message-ids matching a query.
Edited-by: Carl Worth <cworth@cworth.org>: Change comment syntax,
(";;" rather than ";" to make emacs-lisp mode happy), and eliminate
some excess whitespace, as suggested by David Edmonson.
To ease the transition to a JSON based implementation of
`notmuch-show', move the current implementation into a separate file.
Create `notmuch-lib.el' to hold common variables.
Assume that tags never include an opening bracket, and hence improve
the regular expression used to highlight them. This avoids false
matches where the 'from' address of a thread participant includes an
opening bracket.
We add a magic line to the beginning of each Makefile.local file to
help the editor know that it should use makefile mode for editing the
file, (even though the filename isn't exactly "Makefile").
Edited-by: Carl Worth <cworth@cworth.org>: Expand treatment from
emacs/Makefile.local to each instance of Makefile.local.
We currently allow the cursor to be positioned on the "End of search
results" line after the last thread in a search buffer. When
refreshing on this line, there's no thread ID to be used as the
target.
Previously, a refresh from this case would result in a nil thread
target, but we were also using nil to indicate that the target thread
had been found. This caused the position to be lost during refresh,
(the cursor would move from the last line in the buffer to the first).
We fix this by using a magic string of "found" rather than nil to
clearly indicate whether the target thread has actually been found.
It doesn't make sense to move the cursor to some random point in the
middle of a line. We always want the refresh to leave the cursor at
the beginning of some line instead.
We were previously maintaining two lists of the child Makefile
fragments---one for the includes and another for the dependencies. So,
of course, they drifted and the dependency list wasn't up to date.
We fix this by adding a single subdirs variable, and then using GNU
Makefile substitution to generate both the include and the dependency
lists.
Some side effect of this change caused the '=' assignment of the dir
variable to not work anymore. I'm not sure why that is, but using ':='
makes sense here and fixes the problem.
Add emacs/Makefile.local and emacs/Makefile. Move emacs targets into
emacs/Makefile.local, but leave the byte compilation rule in the top
level Makefile.
