This adds functions and variables needed for this feature to be implemented.
Once it's done, the user will be able to use a prefix argument (e.g. pressing
C-u m instead of m) and be able to select a From address.
By default the list of names/addresses to be used during completion will be
automatically generated by the settings in the notmuch configuration file. The
user can customize the notmuch-identities variable to provide an alternate list.
This is based on a previous patch by Carl Worth
(id:"87wrhfvk6a.fsf@yoom.home.cworth.org" and follow-ups).
Before the change, save-excursion was used to save the point. But the
marker saved by save-excursion was inside a region that was deleted,
so that approach is unreliable, (leading to point jumping to a new
position past the button). This patch instead saves point in an
integer variable, and when restoring, carefully avoids moving point
past the button, (in case the new button label is shorter than the old
button label).
Before the change, citation and signature wash buttons used the
same label in both visible and hidden states. Sometimes it is
very convenient when you can determine if the text is hidden or
shown without reading the context and/or clicking the button.
The patch makes it easy to see if the text is shown or hidden by
explicitly saying what the button does (shows or hides the text).
This patch adds hooks that are run before/after messages are tagged
From the emacs interface. In order to implement this and to avoid
having hooks parse all the arguments to the notmuch binary again, I
created a `notmuch-tag' function that other modules should use instead
of running (notmuch-call-notmuch-process "tag" ...) directly.
The old instructions were telling users to do "easy_install cnotmuch"
which installed some old, stale bindings. The new instructions should
be much more effective.
Manually turn off both filling and justification for the one
exceedingly-long URL which was blowing groff's mind. Also, adjust the
position of 'text' to not be at the beginning of a line so it is not
mistaken for a macro.
Ever since we added support for "notmuch search --output=tags" the
"notmuch search-tags" command has been redundant. The recent addition
of alias support makes it easy to drop the explicit search-tags
command in favor of a simple alias that runs "notmuch search
--output=tags *".
So there's no longer any documentation of the search-tags command, but
existing scripts will not break at all.
The example multipart message is made a bit more complicated by adding
a message/rfc822 message, and the all parts are output and tested in
all output formats.
The command-line interface for extracting a single part from a message
recently changed from:
notmuch part --part=X
to:
notmuch show --format=raw --part=X
Since message/rfc822 parts are really just a special kind of
multipart, we here normalize the handling of the two. This will
provide access to sub-parts of message/rfc822 parts, which was
previously unavailable.
We recently made the --part option to "notmuch show" trigger a default
format of "raw", (since the previous default of "text" is not often
useful with a single part---especially a non-text part).
Here, we update the documentation to match.
We unifed the "notmuch part" functionality into "notmuch show" where
the implementation is both simpler and more powerful. But there's no
good reason to break users of the old interface.
Add support for aliases, which are undocumented means of getting at
functionality through deprecated names. The first such alias is
"notmuch part" as implemented here.
Outputting of single MIME parts is moved to an option of notmuch show,
instead of being handled in it's own sub-command. The recent rework
of multipart mime allowed for this change but consolidating part
handling into a single recursive function (show_message_part) that
includes formatting. This allows for far simpler handling single
output of a single part, including formatting.
Simplify the function by moving part counting and formatting outside
of conditionals, thereby eliminating redundant code. This also wraps
message part output handling with proper part formatting.
We rename here in order to make do_show_single into a generic function
for handling output of just a single message, or which format=raw is a
special case. The raw case is handled by setting a new parameter,
params.raw, which is used to tell do_show_single to output a single
message as a raw file.
This is mostly in preparation for much improved part handling to
follow imminently.
A new field "part_sep" is added to the notmuch_show_format structure,
to be used for part separation. This is cleaner than the "first"
argument that was being passed around to the part arguments, and
allows the function that handles overall part output formatting
(show_message_part) to directly handle when outputting the separator.
This simplifies the passing of arguments to the show functions. This
will be very useful as we accumulate more parameters that will need to
be passed. Currently only the entire_thread parameter is passed this
way.
Since commit c51d5b3cdb we are counting
multipart containers when emitting part numbers in the "notmuch show"
output. Unfortunately, "notmuch part" wasn't updated with the same
numbering, (and the test suite is inadequate to catch this).
Fix this by adding a similar part-numbering change to "notmuch part" here.
Various show_message* functions require formatting functions, which
were previously being passed individually as arguments. Since we will
need to be needing to passing in more formatting function in the
future (ie. for crypto support), we here modify things so that we just
pass in the entire format structure. This will make things much
simpler down the line as we need to pass in new format functions.
We move the show_format structure into notmuch-client.c as
notmuch_show_format. This also affects notmuch-reply.c, so we create
a mostly-empty format_reply to pass the reply_part function to
show_message_body.
This file causes emacs to automatically set the correct style
variables to control indentation, etc. One more thing to make it
easier for everyone to collaborate with a consistent coding style.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Remove double quotes and flatten "foo@bar.com <foo@bar.com>" to
"foo@bar.com".
Edited-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net> (clean up
expected output for emacs tests).
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
This controls the appearance of collapsed messages in notmuch-show
mode, avoiding redundancy for repeated subject).
Remove `notmuch-show-always-show-subject'.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Typically used to allow a `text/html' renderer access to images which
are sent along with the HTML.
This is not enabled by default, instead the user must execute
`notmuch-show-setup-w3m' for it to take effect.
Edited-by: Carl Worth <cworth@cworth.org> Add documentation string for
notmuch-show-setup-23m and clean up warning about reference/assignment
of free variable.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Add a variable `notmuch-show-all-multipart/alternative-parts' that
allows the user to indicate that all candidate sub-parts of a
multipart/alternative part should be shown rather than just the
preferred part. The default is `nil', showing only the preferred part.
This is mostly a debugging aid.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
It's simply one more property of a MIME part that might be useful, and
json makes it so easy to add additional properties.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
The compilation of the smtp-dummy program would fail if a build was
attempted on a system without getline. Fix this by simply including
the existing notmuch_compat_srcs variable when constructing the list
of source files for compiling smtp-dummy.
Use code from icalendar.el to convert text/x-vcalendar parts to
something suitable for use with the Emacs diary.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Previously, notmuch show flattened all output, losing information
about the nesting of the MIME hierarchy. Now, the output is properly
nested, (both in the --format=text and --format=json output), so that
clients can analyze the original MIME structure.
Internally, this required splitting the final closing delimiter out of
the various show_part functions and putting it into a new
show_part_end function instead. Also, the show_part function now
accepts a new "first" argument that is set not only for the first MIME
part of a message, but also for each first MIME part within a series
of multipart parts. This "first" argument controls the omission of a
preceding comma when printing a part (for json).
Many thanks to David Edmondson <dme@dme.org> for originally
identifying the lack of nesting in the json output and submitting an
early implementation of this feature. Thanks as well to Jameson Graef
Rollins <jrollins@finestructure.net> for carefully shepherding David's
patches through a remarkably long review process, patiently explaining
them, and providing a cleaned up series that led to this final
implementation. Jameson also provided the new emacs code here.
Previously, the outer multipart part of any multipart/mixed,
multipart/signed, etc. MIME message was silently omitted from the
"notmuch show" output. This prevented any client from correctly
determining to which parts a signature applies, for example.
Now, we actually emit these parts as their own parts. The output is
still flattened---the contained parts are not yet included "within"
the multipart part---so it's still not possible to determine to which
parts a signature applies, but this is one step along the path.
The test suite is updated to reflect this change, (though we'll
eventually want to fix the emacs interface to not display buttons for
the multipart enclosure parts as there's nothing useful for the user
to actually do with them).
This tests "notmuch show" with both --format=text and --format=json on
a message with some non-trivial MIME multipart nesting, (multiple parts
within a multipart/mixed part which is within a multipart/signed part).
The test captures the current behavior (where only the leaf nodes of
the MIME structure are emitted as a flat list---the multipart parts
are effectively ignored). We plan to soon change the json output at
least to emit an actual hierarchy matching the MIME structure, (at
which point we will update this test).
As of gcc 4.6, there are new warnings from -Wattributes along the lines of:
warning: ‘_notmuch_messages’ declared with greater visibility
than the type of its field ‘_notmuch_messages::iterator’
[-Wattributes]
To squelch these, we decorate all such containing structs with
__attribute__((visibility("default"))). We take care to let only the
C++ compiler see this, (since the C compiler would otherwise warn
about ignored visibility attributes on types).
gcc (at least as of version 4.6.0) is kind enough to point these out to us,
(when given -Wunused-but-set-variable explicitly or implicitly via -Wunused
or -Wall).
One of these cases was a legitimately unused variable. Two were simply
variables (named ignored) we were assigning only to squelch a warning about
unused function return values. I don't seem to be getting those warnings
even without setting the ignored variable. And the gcc docs. say that the
correct way to squelch that warning is with a cast to (void) anyway.
This avoids the emacs lisp compiler from emitting warnings on this
replacement code, (which warnings would be hard for us to eliminate
since we didn't write the code but copied it verbatim from emacs 23).
