The current 2 minute timeout is reasonable, but to exercise the test
suite or induce timeout failures, we might want to make it shorter.
This makes it configurable so you can run (for example):
make check NOTMUCH_TEST_TIMEOUT=10s
We stick with the default of 2m.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
FINGERPRINT is already exported by add_gnupg_home, so this is
unnecessary. This change also happens to get rid of the superfluous
check-trustdb spew from the test suite that looked like this:
gpg: checking the trustdb
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
We did not have a test showing what message decryption looks like
within notmuch-emacs. This change gives us a baseline for future work
on the notmuch-emacs interface.
This differs from previous revisions of this patch in that it should
be insensitive to the order in which the local filesystem readdir()s
the underlying maildir.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
If either the moreutils or GNU parallel utility are available, run all
tests in parallel. On my eight core machine this makes for a ~x7
speed-up in the full test suite (1m24s -> 12s).
The design of the test suite makes this parallelization trivial.
The add_email_corpus test utility includes logic that tries to re-use
an index of the corpus if available. This was seemingly done as an
optimization, so that every test that uses the corpus didn't have to
create it's own index of the corpus. However, this has the perverse
side effect of entangling tests together, and breaks parallelization.
Forcing each test to do it's own index does increase the overall time
of the test slightly (~6%), but this will be more than made up for in
the next patch that introduces paraellization.
The typical use case for gpg is that if you control a secret key, you
mark it with "ultimate" ownertrust.
The opaque --import-ownertrust mechanism is GnuPG's standard mechanism
to set up ultimate ownertrust (the ":6:" means "ultimate", for
whatever reason).
We adjust the test suite to match this change, inverting the sense of
one test: since the default is now that the user ID of the suite's own
key is valid, we change the test to make sure that the user ID is not
emitted when it is *not* valid.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The user ID on the self-test is a little bit clunky-looking. It also
may end up showing up elsewhere in the test suite. Centralizing the
user ID in one place should make it easier to handle if it ever
changes, and should make tests easier to read.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This is a subtle difference, but the output of notmuch shouldn't ever
change based on ownertrust itself -- notmuch is intended to show valid
User IDs, and to avoid showing invalid User IDs.
It so happens that setting ownertrust of a key to ultimate sets all
associated user IDs to "full" validity, so the test is correct, but
just misnamed.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Previously if the input was exactly a multiple of the internal buffer
size, notmuch would attempt to fwrite nothing to stdout, but still
expected fwrite to return 1, causing a failure that looked like this:
$ notmuch show --format=raw id:87o96f1cya.fsf@codeaurora.org
...entire message shown as expected..
Error: Write failed
$ echo $?
1
To fix the problem don't call fwrite at all when there's nothing to
write.
Amended by db: add some tests of message sizes likely to cause this
problem.
This drops "file" from mime_node_context and just uses a local
variable. It also uses the new gzip aware utility routines recently
added to util/gmime-extra.c. The use of gzopen / gzfile in addition is
a bit icky, but the choice is between that, and providing yet another
readline implimentation that understands GMime streams.
Rather than storing the lower level stdio FILE object, we store a
GMime stream. This allows both transparent decompression, and passing
the stream into GMime for parsing. As a side effect, we can let GMime
close the underlying OS stream (indeed, that stream isn't visible here
anymore).
This change is enough to get notmuch-{new,search} working, but there is still
some work required for notmuch-show, to be done in a following commit.
note that "notmuch-show for message with invalid From" is still broken
in T310-emacs.sh. It would be good to debug what's going on there and
try to get it fixed!
signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Note that we do keep ignoring the gpg_path configuration option,
though, to avoid breakage of existing installations. It is ignored
like any other unknown configuration option, but we at least document
that it is ignored so that people who find it in their legacy configs
can know that it's safe to drop.
signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Unsigned encrypted mail shows up with a weird empty signature list.
If we successfully decrypted and there was no signature in it, we
should just not show a sigstatus at all.
The documentation for g_mime_decrypt_result_get_signatures says:
a GMimeSignatureList or NULL if the stream was not signed.
If a test has added a GnuPG homedir, it may well want to know the
fingerprint. This saves us from having to redefine this magic string
in multiple places when more tests eventually use the GnuPG homedir.
The new `body:` field (in Xapian terms) or prefix (in slightly
sloppier notmuch) terms allows matching terms that occur only in the
body.
Unprefixed query terms should continue to match anywhere (header or
body) in the message.
This follows a suggestion of Olly Betts to use the facility (since
Xapian 1.0.4) to add the same field with multiple prefixes. The double
indexing of previous versions is thus replaced with a query time
expension of unprefixed query terms to the various prefixed
equivalent.
Reindexing will be needed for 'body:' searches to work correctly;
otherwise they will also match messages where the term occur in
headers (demonstrated by the new tests in T530-upgrade.sh)
Add test of forwarding messages from within emacs.
The first test checks that a references header is properly
added to the new message. The second test checks that the
send-hook of the forwarding message adds a forwarded-tag
to the original message.
Thanks to plujon for pointing out this problem on IRC. The underlying
issue is that the quotes are stripped before the field processors get
the query string, and the heuristic for putting them back is not quite
right.
The exact error messages returned by regerror() aren't standardized;
relying on them isn't portable. Thus, add a a prefix to make clear that
the subsequent message is a regexp parsing error, and only look for this
prefix in the test suite, ignoring the rest of the message.
POSIX doesn't specify the flushing behaviour of the STDOUT stream, so
it's invalid to assume a particular order between the stdout and stderr
output. The current test breaks on musl due to this.
I can't figure out how checking the sign of a bool ever worked. The
following program demonstrates the problem (i.e. for me it prints 1).
#include <stdio.h>
#include <stdbool.h>
int main(int argc, char **argv) {
bool x;
x = -1;
printf("x = %d\n", x);
}
This seems to be mandated by the C99 standard 6.3.1.2.
When generating a reply message, if the user was the originator and
only recipient of the original message, include the user as a
recipient of the reply.
b31e44c678 introduced message-id-parse
as a new binary created by the test suite. It shows up as something
additional to git, but git ought to know to ignore it.
As reported by Sean Whitton, there are mailers (in particular the
Debian Bug Tracking System) that have sensible In-Reply-To headers,
but un-useful-for-notmuch References (in particular with the BTS, the
oldest reference is last). I looked at a sample of about 200K
messages, and only about 0.5% these had something other than a single
message-id in In-Reply-To. On this basis, if we see a single
message-id in In-Reply-To, consider that as authoritative.
The idea is that if a message-id parses with this function, the MUA
generating it was probably sane, and in particular it's probably safe
to use the result as a parent from In-Reply-to.
In a future commit, we will start trusting In-Reply-To's when they
look sane (i.e. a single message-id). Modify these tests so they will
keep passing (i.e. keep choosing References) when that happens.
The current scheme of choosing the replyto (i.e. the default parent
for threading purposes) does not work well for mailers that put
the oldest Reference last.
We (finally) implement the XXX comment. It requires a bit of care not
to reparent all of the possible toplevel messages.
_notmuch_messages_has_next is not ready to be a public function yet,
since it punts on the mset case. We know in the one case it is called,
the notmuch_messages_t is just a regular list / iterator.
This is mainly to lay out the structure of the final code. The problem
isn't really solved yet, although some very simple cases are
better (hence the fixed test). We need two passes through the messages
because we need to be careful not to re-parent too many messages and
end up without any toplevel messages.
For non-root messages, this should not should anything currently, as
the messages are already added in date order. In the future we will
add some non-root messages in a second pass out of order and the
sorting will be useful. It does fix the order of multiple
root-messages (although it is overkill for that).
This documents the bug discussed at
id:87efgmmysi.fsf@len.workgroup
The underlying issue is that the reply to a ghost (missing) message is
falsely classified as a root message in _resolve_thread_relationships.
There are two pairs of tests; in each case the the first test is
simpler / more robust, but also easier to fool.
There are 3 threads here, two synthetic, and one anonymized one using
data from Gregor. They test various aspects of thread
ordering/construction in the presence of replies to ghost messages.
This clarifies that the breakage seen with Xapian 1.4.6 does not have
to do with "funny" tags.
This test is "known broken", but only with xapian 1.4.6, and there's
curently no convenient way to mark that.
Messages that contain Windows-1252 are frequently mislabeled as ISO
8859-1, which may result in non-printable characters when displaying
the message. The test asserts that such characters (in this case
curved quotes) are displayed correctly.
Add fancy new feature, which makes "notmuch show" capable of actually
indexing messages that it just decrypted.
This enables a workflow where messages can come in in the background
and be indexed using "--decrypt=auto". But when showing an encrypted
message for the first time, it gets automatically indexed.
This is something of a departure for "notmuch show" -- in particular,
because it requires read/write access to the database. However, this
might be a common use case -- people get mail delivered and indexed in
the background, but only want access to their secret key to happen
when they're directly interacting with notmuch itself.
In such a scenario, they couldn't search newly-delivered, encrypted
messages, but they could search for them once they've read them.
Documentation of this new feature also uses a table form, similar to
that found in the description of index.decrypt in notmuch-config(1).
A notmuch UI that wants to facilitate this workflow while also
offering an interactive search interface might instead make use of
these additional commands while the user is at the console:
Count received encrypted messages (if > 0, there are some things we
haven't yet tried to index, and therefore can't yet search):
notmuch count tag:encrypted and \
not property:index.decryption=success and \
not property:index.decryption=failure
Reindex those messages:
notmuch reindex --try-decrypt=true tag:encrypted and \
not property:index.decryption=success and \
not property:index.decryption=failure
Wherever the test relies on directories being scanned, this option
should be used to avoid skipping them due to mtimes on directories
matching the database.
Most of these just check that adding the flag does not break existing
functionality. The one test that does check the full-scan
functionality had to be rewritten to output debugging info.
This way, one can build for a different Ruby than $PATH/ruby
(e. g. different versions, or Ruby in other paths).
Signed-off-by: Thomas Schneider <qsx@chaotikum.eu>
This change allows queries of the form
thread:{from:me} and thread:{from:jian} and not thread:{from:dave}
This is still somewhat brute-force, but it's a big improvement over
both the shell script solution and the previous proposal [1], because it
does not build the whole thread structure just generate a
query. A further potential optimization is to replace the calls to
notmuch with more specialized Xapian code; in particular it's not
likely that reading all of the message metadata is a win here.
[1]: id:20170820213240.20526-1-david@tethera.net
Correct URLs that have crept into the notmuch codebase with http://
when https:// is possible.
As part of this conversion, this changeset also indicates the current
preferred upstream URLs for both gmime and sup. the new URLs are
https-enabled, the old ones are not.
This also fixes T310-emacs.sh, thanks to Bremner for catching it.
We expect this to give the same answer as the non-regexp subject
search. It does not because the regexp search relies on the value
slot, which currently contains only one subject.
These roughly replicate the equivalent C tests, although they rely on
the database state created by the former tests, since the python
bindings currently provide read-only access to properties.
The previous loop handling code chooses the last message in the
message list, which turns out to be the last in date order.
See the comment in _notmuch_thread_create.
In some cases (e.g. when building a publicly-visible e-mail archive)
it doesn't make any sense to restrict visibility of the message to the
current user account.
This adds a --world-readable boolean option for "notmuch insert", so
that those who want to archive their mail publicly can feed their
archiver with:
notmuch insert --world-readable
Other local delivery agents (postfix's local, and dovecot's lda) all
default to delivery in mode 0600 rather than relying on the user's
umask, so this fix doesn't change the default.
Also, this does not override the user's umask. if the umask is
already set tight, it will not become looser as the result of passing
--world-readable.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This brings the --decrypt argument to "notmuch reply" into line with
the other --decrypt arguments (in "show", "new", "insert", and
"reindex"). This patch is really just about bringing consistency to
the user interface.
We also use the recommended form in the emacs MUA when replying, and
update test T350 to match.
We also expand tab completion for it, update the emacs bindings, and
update T350, T357, and T450 to match.
Make use of the bool-to-keyword backward-compatibility feature.
We might change some notmuch command line tools that used to be
booleans into keyword arguments.
In that case, there are some legacy tools that will expect to be able
to do "notmuch foo --bar" instead of "notmuch foo --bar=baz".
This patch makes it possible to support that older API, while
providing a warning and an encouragement to upgrade.
We adopt a pythonic idiom here with an optional argument, rather than
exposing the user to the C indexopts object directly.
This now includes a simple test to ensure that the decrypt_policy
argument works as expected.
This test passes with older versions of Xapian as well, because
neither query returns any results.
This should resolve the travis build failure at
https://travis-ci.org/notmuch/notmuch/builds/318571658
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The current behaviour is at best under-documented. The modified test in
T470-missing-headers.sh previously relied on printf doing the right
thing with NULL, which seems icky.
The use of talloc_strdup here is probably overkill, but it avoids
having to enforce that thread->authors is never mutated outside
_resolve_thread_authors_string.
If we're building against a version of Xapian that doesn't offer
retrying the lock, we should be honest and describe the tests as
broken, rather than marking them as missing a test prerequisite.
missing test prerequisites should be for specific components of the
test harness that are missing, not for the backend library notmuch
uses.
Named queries don't work without Xapian FieldProcessor. Rather than
silently skipping them, we should explictly mark them as broken when
building against an older version of Xapian.
Previously, the test suite had simply silently skipped the absolute
date test if we're using an archaic version of Xapian. For
correctness, we should instead mark the test as broken.
This also changes from string to numeric comparison when checking
NOMTUCH_HAVE_XAPIAN_FIELD_PROCESSOR for consistency with other tests.
The old name has a bit of a feeling of hungarian notation. Also many
generators in the core are named with the suffix "s" to indicate
iterables: dict.items, dict.keys for example.
This test will pass if either the notmuch show mitigation code is
working correctly, or upstream emacs mime handling code has it's own
fix for https://bugs.gnu.org/28350.
When i'm trying to understand a message signature, i care that i know
who it came from (the "validity" of the identity associated with the
key), *not* whether i'm willing to accept the keyholder's other
identity assertions (the "trust" associated with the certificate).
We've been reporting User ID information based on the "trust"
associated with the certificate, because GMime didn't clearly expose
the validity of the User IDs.
This change relies on fixes made in GMime 3.0.3 and later which
include https://github.com/jstedfast/gmime/pull/18.
Here's the configuration choice for people who want a cleartext index,
but don't want stashed session keys.
Interestingly, this "nostash" decryption policy is actually the same
policy that should be used by "notmuch show" and "notmuch reply",
since they never modify the index or database when they are invoked
with --decrypt.
We take advantage of this parallel to tune the behavior of those
programs so that we're not requesting session keys from GnuPG during
"show" and "reply" that we would then otherwise just throw away.
If you're going to store the cleartext index of an encrypted message,
in most situations you might just as well store the session key.
Doing this storage has efficiency and recoverability advantages.
Combined with a schedule of regular OpenPGP subkey rotation and
destruction, this can also offer security benefits, like "deletable
e-mail", which is the store-and-forward analog to "forward secrecy".
But wait, i hear you saying, i have a special need to store cleartext
indexes but it's really bad for me to store session keys! Maybe
(let's imagine) i get lots of e-mails with incriminating photos
attached, and i want to be able to search for them by the text in the
e-mail, but i don't want someone with access to the index to be
actually able to see the photos themselves.
Fret not, the next patch in this series will support your wacky
uncommon use case.
There are some situations where the user wants to get rid of the
cleartext index of a message. For example, if they're indexing
encrypted messages normally, but suddenly they run across a message
that they really don't want any trace of in their index.
In that case, the natural thing to do is:
notmuch reindex --decrypt=false id:whatever@example.biz
But of course, clearing the cleartext index without clearing the
stashed session key is just silly. So we do the expected thing and
also destroy any stashed session keys while we're destroying the index
of the cleartext.
Note that stashed session keys are stored in the xapian database, but
xapian does not currently allow safe deletion (see
https://trac.xapian.org/ticket/742).
As a workaround, after removing session keys and cleartext material
from the database, the user probably should do something like "notmuch
compact" to try to purge whatever recoverable data is left in the
xapian freelist. This problem really needs to be addressed within
xapian, though, if we want it fixed right.
The new "auto" decryption policy is not only good for "notmuch show"
and "notmuch reindex". It's also useful for indexing messages --
there's no good reason to not try to go ahead and index the cleartext
of a message that we have a stashed session key for.
This change updates the defaults and tunes the test suite to make sure
that they have taken effect.
When showing a message, if the user doesn't specify --decrypt= at all,
but a stashed session key is known to notmuch, notmuch should just go
ahead and try to decrypt the message with the session key (without
bothering the user for access to their asymmetric secret key).
The user can disable this at the command line with --decrypt=false if
they really don't want to look at the e-mail that they've asked
notmuch to show them.
and of course, "notmuch show --decrypt" still works for accessing the
user's secret keys if necessary.
If the user doesn't specify --decrypt= at all, but a stashed session
key is known to notmuch, when replying to an encrypted message,
notmuch should just go ahead and decrypt.
The user can disable this at the command line with --decrypt=false,
though it's not clear why they would ever want to do that.
This new automatic decryption policy should make it possible to
decrypt messages that we have stashed session keys for, without
incurring a call to the user's asymmetric keys.
Future patches in this series will introduce new policies; this merely
readies the way for them.
We also convert --try-decrypt to a keyword argument instead of a boolean.
the command-line interface for indexing (reindex, new, insert) used
--try-decrypt; and the configuration records used index.try_decrypt.
But by comparison with "show" and "reply", there doesn't seem to be
any reason for the "try" prefix.
This changeset adjusts the command-line interface and the
configuration interface.
For the moment, i've left indexopts_{set,get}_try_decrypt alone. The
subsequent changeset will address those.
If the version of GMime we're building against doesn't support session
key extraction or re-use, mark the tests that rely on session key
capabilities as known-broken.
This should resolve test suite failures on ubuntu trusty and debian
jessie and earlier, which have GMime 2.6.20 -- session key support was
introduced in GMime 2.6.21.
If you've got a notmuch dump that includes stashed session keys for
every decrypted message, and you've got your message archive, you
should be able to get back to the same index that you had before.
Here we add a simple test that give some flavor of how that works.
In 8e7fb88237 Jani replaced the use of $(pwd -P) to find the
TEST_DIRECTORY in order to better support out of tree
builds. Unfortunately the performance-tests need a different value for
the variable and were thus broken.
This commit splits out the setting of this variable for the two sets
of tests. Performance tests still don't work out of tree, because
the handling of the downloaded corpus needs to be updated.
backup_database() and restore_database() used to store the backups in
the test specific temporary directory, through the current working
directory being there. Commit 8e7fb88237 ("test: use source and
build paths in test-lib-common.sh") started using a test specific
backup directories under the build tree test directory. This was in
error. Switch back to the old location, but using paths to the
location instead of relying on current working directory.
Reported by Daniel Kahn Gillmor <dkg@fifthhorseman.net>.
Enable override of the index.try_decrypt setting on a per-run basis
when invoking "notmuch reindex". This allows the possibility of (for
example) an emacs keybinding that adds the cleartext of the currently
shown decrypted message to the index, making it searchable in the
future.
It also enables one-time indexing of all messages matching some query,
like so:
notmuch reindex tag:encrypted and\
not property:index.decryption=success and\
from:alice@example.org
We also update the documentation and tab completion, and add a few
more tests.
Enable override of the index.try_decrypt setting on a per-message
basis when invoking "notmuch insert".
We also update the documentation and tab completion, and add more tests.
Enable override of the index.try_decrypt setting during "notmuch new"
on a per-invocation basis.
We update the documentation and tab completion, and also add a test.
Subsequent patches may want to send GNU-style --long-arguments to
notmuch new in the test suite, in particular when invoking
emacs_fcc_message. This changeset makes that possible.
The primary motivation here is to fix TMP_DIRECTORY cleanup prior to
running each test when the current working directory is not the test
subdirectory. Tests with failures would leave their TMP_DIRECTORY
directory behind for debugging, and repeated out-of-tree test runs
would have old temp directories. (This lead to e.g. T310-emacs.sh
hanging because emacs would prompt for overwriting files.)
We remove the likely anyway defunct --root test option while at it,
just to be on the safe side when doing 'rm -rf' on the TMP_DIRECTORY.
Turns out round trip tests didn't really round trip anything. Broken
by yours truly in 971cdc72cd ("test: make it possible to have
multiple corpora"). Ooops.
C99 stdbool turned 18 this year. There really is no reason to use our
own, except in the library interface for backward
compatibility. Convert the cli and test binaries to stdbool.
Several changes at once, just to not have to change the same lines
several times over:
- Use designated initializers to initialize opt desc arrays.
- Only initialize the needed fields.
- Remove arg_id (short options) as unused.
- Replace opt_type and output_var with several type safe output
variables, where the output variable being non-NULL determines the
type. Introduce checks to ensure only one is set. The downside is
some waste of const space per argument; this could be saved by
retaining opt_type and using a union, but that's still pretty
verbose.
- Fix some variables due to the type safety. Mostly a good thing, but
leads to some enums being changed to ints. This is pedantically
correct, but somewhat annoying. We could also cast, but that defeats
the purpose a bit.
- Terminate the opt desc arrays using {}.
The output variable type safety and the ability to add new fields for
just some output types or arguments are the big wins. For example, if
we wanted to add a variable to set when the argument is present, we
could do so for just the arguments that need it.
Beauty is in the eye of the beholder, but I think this looks nice when
defining the arguments, and reduces some of the verbosity we have
there.
This imports a message with ISO-8859-2 encoded characters, then opens
the database using the python bindings. We peek through all mesage
parts, afterwards print the message id.
Signed-off-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Commit a7964c86d1 ("emacs: Sanitize authors and subjects in search
and show") added sanitization of header information for display. Do
the same for reply subjects.
This fixes the long-standing annoying artefact of certain versions of
mailman using tab as folding whitespace, leading to tabs in reply
subjects.
This is a logical followup to "lib: index the content type of
signature parts", which will make it easier to record the message
structure of all messages.
It's useful (*) to be able to easily find messages with certain types
of signatures. Having the mimetype: prefix searches fail for some
content types is also genuinely surprising (*). Index the content type
of signature parts.
While at it, switch to the gmime convenience constants for content and
signature part indexes.
*) At least for developers of email software!
Add known broken subtests for searching signed and encrypted messages
using mimetype: prefix search for the content-types of signed and
encrypted parts.
In [1] Mark showed that the the current code (d7a49e81) is not
consistent in it's handling of subjects of messages with duplicate
message-ids (or in notmuch-speak, of messages with multiple files).
notmuch-search uses indexing order and explicitedly preserves the
first. notmuch-show (apparently) uses alphabetical (or at least xapian
term order) of filenames. In a perfect world we would probably report
all subjects in the json output; at the very least we should be
consistent.
[1]: id:87378dny3d.fsf@qmul.ac.uk
In [1], Mark gave a test that was behaving strangly. This turns out to
be specific to reindexing. I suppose one could argue that picking the
lexicographically last file name is a defensible choice, but it's
almost as easy to take the first, which seems more intuitive. So mark
the current situation as broken.
[1]: id:1503859703-2973-1-git-send-email-markwalters1009@gmail.com
The existing test for notmuch search had the first in filename order
the same as the first indexed, which made it harder to understand what
the underlying behaviour is. Add a file with a lexicographically
smaller name, but later index time to clarify this.
The original intent of this test was to verify that notmuch show was
not crashing when the first file (where headers are being read from)
was deleted. Run the output through some sanitization so that as we
add and delete copies we don't have to update this test.
Changed "" quotes to '' as we're not supposed to dynamically
alter python program (via shell $variable expansion).
Added space to python program to match general python style.
Replaced $* with 'idiomatic' "$@" to serve as better example.
In [1], Vladimir Panteleev observed that the In-Reply-To and
References headers could be wrapped in the 'default' output format of
notmuch-reply, depending on the version of Emacs creating the
message. In my own experiments notmuch-reply sometimes wraps headers
with only one message-id if that message-id is long enough. However it
happens, this causes the previous approach using grep to fail.
Since I found the proposed unwrapping shell fragment in [1] a bit hard
to follow, I decided to write a little python script instead. Then
Tomi suggested a slight generalization of my script, and here we are.
[1] id:20170817175145.3204-7-notmuch@thecybershadow.net
On some system configurations, setting a breakpoint on the "add_file"
function then issuing "continue" in gdb causes the debugger to
seemingly jump over the add_file invocation. This results in a test
failure, as the "Handle files vanishing between scandir and add_file"
subtest expects add_file to be called and fail due to the vanishing
file. The compiler optimization level also plays a role - the problem
can be reproduced with CFLAGS having -O2 but not -Og.
This problem was observed manifesting as a test failure on Travis CI
configured with "dist: trusty" and "sudo: false". It was not
reproducible on a local Docker image of Travis' runtime environment,
so Travis' virtualization infrastructure likely plays a role as well.
* T050-new.sh: Breakpoint notmuch_database_add_message instead of
add_file to the same effect, and avoid bad gdb behaviour on Travis
CI.
Amended by db:
s/notmuch_database_add_message/notmuch_database_index_file/
Somehow the wrapper function doesn't work as a breakpoint; perhaps due
to inlining.
We reorder reading maildir flags to avoid overwriting 'new.tags'. The
inverted status of 'unread' means the maildir flag needs to be checked
a second time.
I backpedalled here on the idea of supporting 'new.tags' without
'unread' in the presence of maildir syncing. For files in 'new/', it
seems quite natural to tag them as 'unread'.
json.tool does not sort or otherwise normalize the order of JSON keys
in its output, which can result in test failures on some test systems.
Instead, use a one-line Python script passed to the interpreter
directly on its command line. Use sort_keys=True for json.dump to
ensure the key order is normalized. The script works with both Python
2 and 3.
* test/test-lib.sh: Update test_expect_equal_json.
We need a way to pass parameters to the indexing functionality on the
first index, not just on reindexing. The obvious place is in
notmuch_database_add_message. But since modifying the argument list
would break both API and ABI, we needed a new name.
I considered notmuch_database_add_message_with_params(), but the
functionality we're talking about doesn't always add a message. It
tries to index a specific file, possibly adding a message, but
possibly doing other things, like adding terms to an existing message,
or failing to deal with message objects entirely (e.g. because the
file didn't contain a message).
So i chose the function name notmuch_database_index_file.
I confess i'm a little concerned about confusing future notmuch
developers with the new name, since we already have a private
_notmuch_message_index_file function, and the two do rather different
things. But i think the added clarity for people linking against the
future libnotmuch and the capacity for using index parameters makes
this a worthwhile tradeoff. (that said, if anyone has another name
that they strongly prefer, i'd be happy to go with it)
This changeset also adjusts the tests so that we test whether the new,
preferred function returns bad values (since the deprecated function
just calls the new one).
We can keep the deprecated n_d_add_message function around as long as
we like, but at the next place where we're forced to break API or ABI
we can probably choose to drop the name relatively safely.
NOTE: there is probably more cleanup to do in the ruby and go bindings
to complete the deprecation directly. I don't know those languages
well enough to attempt a fix; i don't know how to test them; and i
don't know the culture around those languages about API additions or
deprecations.
This patch fixes the 'Deleted first duplicate file does not stop
notmuch show from working' test.
If a message to be shown has several duplicated files, and for some
reason the first file in the list is not available anymore, notmuch
will exit with an error.
This is clearly a problem in the database, but we are not going to let
this problem be a show-stopper. Let's walk through the list, and show
the first existing file.
Signed-off-by: Yuri Volchkov <yuri.volchkov@gmail.com>
This patch fixes the "Insert message into folder with trailing /"
test. The problem was insufficient path canonization.
From database's point of view, "Sent" and "Sent/" are different
folders. If user runs (note the last '/'):
notmuch insert --folder=maildir/Sent/ < test.msg
notmuch will create an extra XDIRECTORY record for the folder
'Sent/'. This means that database will have _TWO_ records for _ONE_
physical folder: 'Sent' and 'Sent/'. However, the 'notmuch new'
command will update only records related to the first one (the correct
one).
Now, if user moved the email file (e.g. from 'Sent/new' to
'Sent/cur'), 'notmuch new' will add a record about the new file, but
will not delete the old record.
Signed-off-by: Yuri Volchkov <yuri.volchkov@gmail.com>
From database's point of view, "Drafts" and "Drafts/" are different
folders
Signed-off-by: Yuri Volchkov <yuri.volchkov@gmail.com>
Amended: add test_subtest_known_broken (db)
In the commit 51cd69feb1 the part of the
test "test runs if prerequisite is satisfied" has been
removed. However, there was a remainder of that test - variable
'haveit'.
Kill it, to not to confuse people.
Signed-off-by: Yuri Volchkov <yuri.volchkov@gmail.com>
A leading / in paths in a .gitignore file matches the beginning of the
path, meaning that for patterns without slashes, git will match files
only in the current directory as opposed to in any subdirectory.
Prefix relevant paths with / in .gitignore files, to prevent
accidentally ignoring files in subdirectories and possibly slightly
improve the performance of "git status".
971cdc72cd renamed corpus.mail to
corpora.mail. Although 971cdc72cd
updated some of the remaining corpus.mail references, two remained,
causing the test suite to leave behind an unignored corpora.mail
directory.
The corresponding xapian document just gets more terms added to it,
but this doesn't seem to break anything. Values on the other hand get
overwritten, which is a bit annoying, but arguably it is not worse to
take the values (from, subject, date) from the last file indexed
rather than the first.
There are many other problems that could be tested, but these ones we
have some hope of fixing because it doesn't require UI changes, just
indexing changes.
There are some cases like remote usage where this might cause
problems, but those users can easily customize the variable. The
inconvenience seems to be outweighed by the security benefit for most
users.
gmime 3.0 no longer offers a means to set the path for gpg.
Users can set $PATH anyway if they want to pick a
differently-installed gpg (e.g. /usr/local/bin/gpg), so this isn't
much of a reduction in functionality.
The one main difference is for people who have tried to use "gpg2" to
make use of gpg 2.1, but that isn't usefully co-installable anyway.
The reply-to munging code might behave differently whether there's an
exact match on the strings or not, or whether the string is a raw
addr-spec instead of an name-addr. These tests cover those variations
(i also had to tweak json output further below when this new test was
added).
Since the error field is unused by the emacs front end, no changes are
needed other than bumping the format version number.
As it is, this is a bit overengineered, but it will reduce duplication
when we support gmime 3.0
This is another case where the behaviour of gmime-2.6 and gmime-3.0
seems to differ. It may be that we prefer the more lax parsing of the
previous version, but that should be tested separately.
Since gnupg 2.1.20, gpg-agent no longer shut itself down when
$GNUPGHOME directory is removed.
Add exit hooks to the test modules which execute `gpgconf --kill all`
Add exit hooks to execute `gpgconf --kill all` in the modules that
create $GNUPGHOME for gpg to work with.
New function at_exit_function registers given function to be called
at script termination.
Functions so registered are called in the reverse order of their
registration; no arguments are passed.
Function is called only once; re-adding with function name already
registered will remove previous registration.
New function rm_exit_function can be used to remove registration.
Modules (and possibly test-lib.sh functions) in future commits will
register such functions.
The dynamic generation of the linker version script for libnotmuch
exports has grown rather complicated.
Reverse the visibility control by hiding symbols by default using
-fvisibility=hidden, and explicitly exporting symbols in notmuch.h
using #pragma GCC visibility. (We could also use __attribute__
((visibility ("default"))) for each exported function, but the pragma
is more convenient.)
The above is not quite enough alone, as it would "leak" a number of
weak symbols from Xapian and C++ standard library. Combine it with a
small static version script that filters out everything except the
notmuch_* symbols that we explicitly exposed, and the C++ RTTI
typeinfo symbols for exception handling.
Finally, as the symbol hiding test can no longer look at the generated
symbol table, switch the test to parse the functions from notmuch.h.
