Maximilian
138de643a2
Add adc128s102 sensor ( #3822 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-19 17:06:22 +13:00
Michael Davidson
8095db6715
Thermostat remove deprecated config ( #3643 )
...
* Raise errors for all the now deprecated options
* Fix CONF_DEFAULT_PRESET detection
* Stop attempting to set the non-existent normal_config
* Add support for default presets
* Fix correct detection of Two Point temperature mode
* Fix lint issues
* Fix tests
* Generate correct yaml for equivalent configurations
* Remove debug code
* Only set default preset if the thermostat does not have state to restore
* Add restore_default_preset_on_boot option
If set to True then the default_preset will be applied on every boot. If False (Default) state will be restored from memory as per prior versions
* Apply lint suggestions
* Switch from restore_default_preset_on_boot to an enum for startup_behavior
This gives better self-documentation as well as the option for extending to other options down the track
* Lint fixes
* Rename startup_behavior to on_boot_restore_from
This removes any issues with different English locales
* Fix comparable_preset yaml output alignment
* Add dump of on_boot_restore_from setting
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2022-09-25 21:59:04 -05:00
anatoly-savchenkov
9a5f865eea
Add Factory Reset button and switch ( #3724 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-12 10:23:46 +12:00
David Buezas
8ba207fc7f
Add support for BL0942 voltage, current, energy and power Sensor ( #3777 )
2022-09-12 09:36:09 +12:00
Jesse Hills
89fd367297
YAML linting ( #3779 )
2022-09-06 15:48:01 +12:00
functionpointer
5561d4eaeb
hydreon_rgxx: Support lens_bad, em_sat and temperature ( #3642 )
2022-08-17 16:07:33 +12:00
anatoly-savchenkov
ac10e27f08
[Nextion] Add on_page trigger ( #3673 )
2022-08-09 12:44:20 +12:00
Keith Burzinski
e2cddf1005
Sprinkler controller component ( #2249 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-09 12:19:42 +12:00
piechade
2a49811f6e
Add support for SMT100 Soil Moisture Sensor ( #3654 )
...
Co-authored-by: Dennis Piecha <d.piecha@ymail.com>
2022-07-28 11:22:49 +12:00
Jesse Hills
b7e52812f8
Fix tests ( #3455 )
2022-05-10 22:02:58 +12:00
Matthew Garrett
98c733108e
PMSX003: Add support for specifying the update interval and spinning down ( #3053 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-05-10 21:35:43 +12:00
rainero84
2059283707
Early pin init ( #3439 )
...
* Added early_pin_init configuration parameter for ESP8266 platform
* Added #include to core
* Updated test3.yaml to include early_pin_init parameter
Co-authored-by: Rainer Oellermann <ro@playplaycode.com>
2022-05-09 17:21:43 +12:00
I. Tomita
7a778f3f33
Add support for BL0939 (Sonoff Dual R3 V2 powermeter) ( #3300 )
2022-04-21 10:11:25 +12:00
anatoly-savchenkov
8b2c032da6
Add Sonoff D1 Dimmer support ( #2775 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-12 17:03:32 +12:00
functionpointer
fdda47db6e
Add integration hydreon_rgxx for rain sensors by Hydreon ( #2711 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-11 14:50:56 +12:00
rrooggiieerr
9e3e34acf5
Add cover toggle support to endstop cover ( #3358 )
2022-04-11 10:55:45 +12:00
functionpointer
397ef72b16
MLX90393 three-axis magnetometer ( #2770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 20:42:11 +13:00
Wouter van der Wal
a718ac7ee0
Add qr code support for displays ( #2952 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 22:20:45 +13:00
Oxan van Leeuwen
6a2c58fcc0
Implement output button ( #3109 )
2022-01-25 09:30:48 +13:00
Pavel Skuratovich
a6a9ebfde2
slow_pwm: allow to restart a cycle on state change ( #3004 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-22 23:08:55 +01:00
William Charlton
f0b183a552
Wake-on-LAN button ( #3030 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: William Charlton <will.charlton1@icloud.com>
2022-01-23 00:13:46 +13:00
Andreas Soehlke
27364ee72c
Add cd74hc4067 multiplexer ( #2431 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: asoehlke <git@soehlke.de>
2022-01-11 16:59:57 +13:00
Chris Nussbaum
a0ea2aae6e
Add an action for pzemac to reset the total energy ( #2480 )
2022-01-10 23:13:39 +13:00
Snōwball
c855bc31b4
Add bl0940 component used by e.g. tuya devices ( #1904 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:38:58 +01:00
Petr Vraník
5d70ff702b
quantile filter support ( #2900 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: pvranik <petr.vranik@mgm-tp.com>
2021-12-15 07:43:42 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Otto Winter
7f34561e53
Fix ESP8266 GPIO0 Pullup Validation ( #2572 )
2021-10-21 12:23:37 +02:00
razorback16
534ce11d54
TCS34725 BugFix and GA factor ( #2445 )
...
- Fixed endianness bug on tcs34725 data read
- Fixed lux adjustments based on gain, integration time and GA factor
- Added glass attenuation factor to allow using this sensor behind
semi transparent glass
Co-authored-by: Razorback16 <razorback16@users.noreply.github.com>
2021-10-13 18:45:41 +02:00
Jesse Hills
34db9d9ef2
Add optional timeout for wait_until action ( #2282 )
2021-10-13 08:23:24 +13:00
Oxan van Leeuwen
1184bbc976
Reduce IRAM usage in test3 ( #2499 )
2021-10-13 08:22:38 +13:00
Daniel Müller
2eb5f89d82
Add cover toggle support ( #1809 )
...
* Add cover toggle support
Step through open/stop/close/stop sequence with every toggle
* Move the cover toggle logic to perform()
* Add clang-tidy CI suggestion
* Implement cover toggle action as cover trait
* Handle toggle correctly if cover fully closed on POR
* Fix CI finding
* Add deprecated warning
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Mueller, Daniel <daniel.mueller@karlstorz.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:31:15 +02:00
Marcos Pérez Ferro
e30f17f64f
Add Current based cover ( #1439 )
...
* Adding first version of current_base cover. No Interlock yet.
* simplifying code
* Implementing malfunction protection
* Adding test
* Fixing too long lines
* Fixing test sensor names
* Adding missing id's in ade7953 tests
* Adding code owners as requested
* Fixing issue setting position when stop reached
* Fixing issue setting position when stop reached
* Black formatting
* Fixing format issues
* Fix for concurrent changes
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:22:45 +02:00
Silvio
ed593544d8
Add support for Daly Smart BMS ( #2156 )
...
* Add support for Daly Smart BMS
* Fix clang-format and python lint
* Fix const declaration
* Add code owner
* Fix malloc with std::vector
* Fix with suggestions
* Revert "Fix with suggestions"
This reverts commit bc618f20cf
2021-09-22 12:03:42 +02:00
Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Otto Winter
e5051eefbc
API encryption ( #2254 )
2021-09-09 09:22:47 +12:00
Sergey V. DUDANOV
4e120a291e
Midea support v2 ( #2188 )
2021-09-09 09:10:02 +12:00
Guillermo Ruffino
f26767b65e
Dsmr component ( #1881 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:32:16 +02:00
Keith Burzinski
98d32876b5
Thermostat enhancements 2 ( #2114 )
2021-08-10 10:16:44 +02:00
John "Warthog9" Hawley
fb24e55c8d
pmsx003: add standard particle, particle counts ( #1694 )
2021-08-02 10:32:08 +02:00
SenexCrenshaw
0651716b96
Nextion upload and sensors ( #1464 )
...
Co-authored-by: Senex Crenshaw <senexcrenshaw@gmail.com>
2021-07-15 12:51:15 +12:00
Barry Loong
e5929225eb
Fix typo in test3.yaml ( #1928 )
2021-06-17 21:39:59 +12:00
Lumpusz
ebadaa9660
Add preset, custom_preset and custom_fan_mode support to climate ( #1471 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-04 22:04:54 +12:00
foxsam21
2b9350ce76
Added vol +/- control to dfplayer ( #1856 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 10:12:23 +12:00
polyfaces
bb759d52c8
Add support for SDMXXX energy meters ( #1260 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:05:49 +12:00
