* Add testing branch to workflow
* Add workflow
* Checkpoint
* Align SPI data rates in c++ code with Python code.
* Checkpoint
* CI fixes
* Update codeowners
* Workflow cleanup
* Rename to spi_rgb_led
* Rename header file
* Clang tidy
* Disable spi after transfer.
* Move enable() to where it belongs
* Call spi_setup before enable
* Clang tidy
* Add test
* Rename to spi_led_strip
* Include 'defines.h'
* Fix CODEOWNERS
* Migrate data rate to new style setting.
* Remove defines.h
* Fix class name
* Fix name in .py
* And more more name tidy up.
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
* Add BMI160 support
* BMI160: use set_timeout for delay
* Add support for old compilers
Fix "warning: missing terminating ' character"
* Increase power-on delay to be more conservative
* Add helper for reading little-endian data over i2c
* Replace configuration names with globals
Note: for testing with external components, you will need to comment out the import & define your own CONF_GYROSCOPE_X, etc, in this file
* Improve icons
* Fix tests & lint
* [ADC] Support measuring VCC on Raspberry Pico (W)
Added support for measuring VCC on Raspberry Pico (W) with ADC.
GPIO pin is provided as `VCC`, same as with ESP8266. VSYS is the voltage
being actually processed, and might have an offset from actual power
supply voltage (e.g. USB on VBUS) due to voltage drop on
Schottky diode between VSYS and VBUS on Rasberry Pico. The offset has
experimentally been found to be ~0.25V on Pico W and ~0.1 on Pico,
presumably due to different power consumption.
Example usage:
sensor:
- platform: adc
pin: VCC
name: "VSYS"
* + Added tests for VCC measuring on `rpipicow` board
* Checkpoint
* Checkpoint
* Checkpoint
* Revert hal change
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* ESP-IDF working
* clang-format
* use bus_list
* Add spi_device; fix 16 bit transfer.
* Enable multi_conf;
Fix LSB 16 bit transactions
* Formatting fixes
* Clang-format, codeowners
* Add test
* Formatting
* clang tidy
* clang-format
* clang-tidy
* clang-format
* Checkpoint
* Checkpoint
* Checkpoint
* Revert hal change
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* ESP-IDF working
* clang-format
* use bus_list
* Add spi_device; fix 16 bit transfer.
* Enable multi_conf;
Fix LSB 16 bit transactions
* Formatting fixes
* Clang-format, codeowners
* Add test
* Formatting
* clang tidy
* clang-format
* clang-tidy
* clang-format
* Clang-tidy
* Clang-format
* clang-tidy
* clang-tidy
* Fix ESP8266
* RP2040
* RP2040
* Avoid use of spi1 as id
* Refactor SPI code.
Add support for ESP-IDF hardware SPI
* Force SW only for RP2040
* Break up large transfers
* Add interface: option for spi.
validate pins in python.
* Can't use match/case with Python 3.9.
Check for inverted pins.
* Work around target_platform issue with
* Remove debug code
* Optimize write_array16
* Show errors in hex
* Only one spi on ESP32Cx variants
* Ensure bus is claimed before asserting /CS.
* Check on init/deinit
* Allow maximum rate write only SPI on GPIO MUXed pins.
* Clang-format
* Clang-tidy
* Fix issue with reads.
* Finger trouble...
* Make comment about missing SPI on Cx variants
* Pacify CI clang-format. Did not complain locally??
* Restore 8266 to its former SPI glory
* Fix per clang-format
* Move validation and choice of SPI into Python code.
* Add test for interface: config
* Fix issues found on self-review.
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
* Add Lilygo T-Embed to st7789v display config.
* Move all configuration into the Python code.
Add presets for TTGO.
All preset configuration can be overridden.
* Add Adafruit S2 pin presets
* Add test
* Add funhouse pins.
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
* Keep ordering of options consistent
* Remove unused declarations
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Co-authored-by: Sam Neirinck <git@samneirinck.com>
Co-authored-by: David Buezas <dbuezas@users.noreply.github.com>
Co-authored-by: Stroe Andrei Catalin <catalin2402@gmail.com>
Co-authored-by: Sam Neirinck <github@samneirinck.be>
Co-authored-by: Péter Sárközi <xmisterhu@gmail.com>
Co-authored-by: Hajo Noerenberg <hn@users.noreply.github.com>
* Split display_buffer sub-components into own files
Move the Image, Animation and Font classes to their own h/cpp pairs,
instead of having everything into the display_buffer h/cpp files.
* Fixed COLOR_ON duplicate definition
* Add support for TMP1075 temperature sensor
TMP1075 is a temperature sensor with I2C interface in industry standard
LM75 form factor and pinout.
https://www.ti.com/product/TMP1075
Example YAML:
```yaml
sensor:
- platform: tmp1075
name: TMP1075 Temperature
id: radiator_temp
update_interval: 10s
i2c_id: i2c_bus_1
conversion_rate: 27.5ms
alert:
limit_low: 50
limit_high: 75
fault_count: 1
polarity: active_high
```
* Add myself as codeowner of the TMP1075 component
* Include '°C' unit when logging low/high limit setting
* Reformat
No functional changes.
* Fix logging: use %.4f for temperatures, not %d
* Fix config initialisation
* Use relative include for `tmp1075.h`
* Apply formatting changes suggested by script/clang-tidy for ESP32
* Add YAML to test1.yaml
* Fix test1.yaml by giving TMP1075 a name
* Less verbose logging (debug -> verbose level)
* Schema: reduce accuracy_decimals to 2
* I2C address as hexadecimal
* Proper name for enum in Python
The enum on the C++ side was renamed (clang-tidy) but I forgot to take that
into account in the Python code.
* Expose 'alert function' to the code generator/YAML params and remove 'shutdown'
Shutdown mode doesn't work the way I expect it, so remove it until someone
actually asks for it.
Also 'alert mode' was renamed to 'alert function' for clarity.
* Move simple setters to header file
* Remove `load_config_();` function
