Jesse Hills
1db7043a4d
Allow wizard to specify secrets ( #2875 )
2021-12-06 20:58:51 +13:00
Jesse Hills
49932747b3
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-06 20:57:56 +13:00
Jesse Hills
55db190875
Add endpoint to fetch secrets keys ( #2873 )
2021-12-06 20:15:34 +13:00
Massimiliano Ravelli
71fe2f7ed3
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-06 20:01:50 +13:00
Oxan van Leeuwen
ffc112c9d0
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-06 20:01:14 +13:00
Oxan van Leeuwen
d3e48e296f
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-06 19:59:50 +13:00
Martin
14f6ae75ea
SPS30 : fix i2c read size ( #2866 )
2021-12-06 19:58:26 +13:00
Carlos Garcia Saura
c84efe64d3
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-06 19:56:53 +13:00
Martin
10e89a7dbb
tlc59208f : fix compilation error ( #2867 )
2021-12-06 19:54:46 +13:00
Oxan van Leeuwen
40c017fd54
Update ota_component.cpp ( #2852 )
2021-12-03 07:52:56 +13:00
Jesse Hills
f0bcf81a98
Add a simple helper to remap values ( #2850 )
2021-12-02 09:23:11 +01:00
Jesse Hills
6a0b343289
Bump version to 2022.1.0-dev
2021-12-02 19:38:49 +13:00
Martin
9ca4e8f32a
modbus_controller: bugfix: enable overriding calculated register size ( #2845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-02 15:45:11 +13:00
Alexandre-Jacques St-Jacques
1b88b7a166
Fix wifi not working with manual_ip using esp-idf ( #2849 )
2021-12-02 15:33:48 +13:00
Paul Nicholls
caf352ff06
Tuya Cover improvements ( #2637 )
2021-12-02 15:26:56 +13:00
Oxan van Leeuwen
54106179a1
Set ESP32 watchdog to loop task ( #2846 )
2021-12-02 09:05:42 +13:00
Oxan van Leeuwen
607601b3a4
Enable a bunch of clang-tidy checks ( #2149 )
2021-12-02 09:03:51 +13:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Oxan van Leeuwen
fbe1bca1b9
Fix compilation using subprocesses ( #2834 )
2021-12-01 17:37:24 +01:00
Mark Dietzer
24a5325db3
Declare arch_get_cpu_cycle_count for esp8266 as IRAM ( #2843 )
2021-12-01 10:01:15 +01:00
Yuval Brik
1ec3140759
ESP32 Deep Sleep: correct level value ( #2812 )
...
Upon registering for ESP32 deep sleep, DeepSleepComponent::begin_sleep
calculates the level value to wake up on.
As part of PR #2303 , the level was changed to be based on `inverted`
instead of `!inverted`:
Before:
1e8e471dec/esphome/components/deep_sleep/deep_sleep_component.cpp (L76)2b04152482/esphome/components/deep_sleep/deep_sleep_component.cpp (L80)#2644 .
[0]
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html#_CPPv428esp_sleep_enable_ext0_wakeup10gpio_num_ti
2021-12-01 09:38:58 +01:00
Oxan van Leeuwen
cbc1334b8d
Fix compile warning in Tuya automations ( #2837 )
2021-12-01 17:11:21 +13:00
mechanarchy
08cbb97ec9
Allow Git credentials to be loaded from secrets ( #2825 )
2021-12-01 17:10:25 +13:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b32b918936
Button device class ( #2835 )
2021-11-30 16:18:21 +01:00
Carlos Garcia Saura
cd018ad3a5
Burst read for BME280, to reduce spurious spikes ( #2809 )
2021-11-30 16:12:52 +01:00
Adrián Panella
24dfecb6f0
cse7766: add energy sensor ( #2822 )
2021-11-30 16:08:00 +01:00
Keith Burzinski
556d071e7f
Fix 8266 SPI Clock Polarity Setting ( #2836 )
2021-11-30 19:30:45 +13:00
dentra
939fb313df
Tuya text_sensor and raw data usage ( #1812 )
2021-11-30 08:08:52 +13:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
definitio
f50e40e0b8
Fix custom mode_state_topic ( #2827 )
2021-11-29 18:09:09 +01:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
anatoly-savchenkov
cae283dc86
Fixed data type inside fast_random_8() routine ( #2818 )
2021-11-29 08:31:15 +13:00
Conclusio
7afcb0fb04
Add delay to improve stability ( #2793 )
2021-11-29 08:13:42 +13:00
Dave T
10f830c3ef
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 08:12:40 +13:00
Carlos Garcia Saura
7a5c3aa7ed
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 08:06:53 +13:00
Oxan van Leeuwen
2b50406856
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 08:02:10 +13:00
Oxan van Leeuwen
10a2a7e0fc
Fix parsing numbers in Anova ( #2816 )
2021-11-29 08:00:29 +13:00
Maurice Makaay
671d68bc2c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-26 21:25:58 +01:00
Oxan van Leeuwen
5946c37925
Fix usage of deprecated climate method in anova ( #2801 )
2021-11-26 09:16:39 +01:00
Martin
17a37b1de9
Modbus_controller: Add custom command. ( #2680 )
2021-11-26 12:48:52 +13:00
Adrián Panella
e7827a6997
total_daily_energy: allow to disable restore mode ( #2795 )
2021-11-25 22:35:36 +01:00
Oxan van Leeuwen
9681dfb458
Correct constant for dynamic I2S bus in NeoPixelBus ( #2797 )
2021-11-26 09:37:27 +13:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Oxan van Leeuwen
3637be251e
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:00:49 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Martin
ccfa1e23f0
Add support for sdp8xx ( #2779 )
2021-11-25 11:28:19 +13:00
rsumner
290da8df2d
Fix LEDC resolution calculation on ESP32-C3/S2/S3 ( #2794 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-25 11:22:51 +13:00
Martin
4b1d73791d
remove LEDC_HIGH_SPEED_MODE for C3, S2, S3 ( #2791 )
2021-11-25 08:06:08 +13:00
Jesse Hills
7e8012c1a0
Allow specifying the dashboard bind address ( #2787 )
2021-11-25 07:59:32 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
krunkel
598f5b241f
Remove unnecessary write in AHT10 update ( #2675 )
2021-11-23 09:26:16 +01:00
Paul Monigatti
05fe5db030
Relax the icon validator to allow non-mdi icons ( #2764 )
2021-11-23 09:21:14 +01:00
Andreas Hergert
710096b1c6
Fixed wrong setup of tc9548a ( #2766 )
2021-11-23 09:20:55 +01:00
Dave T
07b882c801
Fix distorted gif frames when resizing ( #2774 )
2021-11-23 09:20:36 +01:00
cvwillegen
3e5331a263
Prettier date time display after time sync ( #2778 )
2021-11-23 09:20:20 +01:00
Oxan van Leeuwen
897277992b
Introduce str_snprintf helper function ( #2780 )
2021-11-23 20:30:49 +13:00
Samuel Sieb
1424091ee5
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-22 12:11:36 +13:00
Kamil Trzciński
61ec16cdfc
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-22 12:09:11 +13:00
Dave T
e5cb5756aa
Fix frame scaling for animated gifs ( #2750 )
2021-11-18 23:20:32 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Martin
448e1690aa
Add retry handler ( #2721 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-18 11:59:40 +13:00
Martin
8267f01ccd
Remove arduino dependency from hm3301 ( #2745 )
2021-11-18 08:03:46 +13:00
Sergey V. DUDANOV
6f9439e1bc
Fix byte order in NEC protocol implementation ( #2534 )
2021-11-17 18:35:50 +01:00
spattinson
06994c0dfc
Change LUT for ttgo t5 2.13inch to improve partial refresh ( #2475 )
2021-11-17 18:28:36 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Jesse Hills
df6730be55
Move to use improv lib from platformio ( #2741 )
2021-11-17 18:23:17 +01:00
Franck Nijhof
6c1ef398bb
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:28:31 +13:00
Evgeny
0469e19f54
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 09:52:40 +01:00
Jesse Hills
dbcfa7b599
Remove duplicated const data in esp8266 boards ( #2740 )
2021-11-17 16:22:38 +13:00
rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
f1954df573
Fix zeroconf time comparisons ( #2733 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2021-11-16 12:47:06 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
cvwillegen
b386284180
Ignore secrets.yaml on command line ( #2715 )
2021-11-15 20:06:55 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Oxan van Leeuwen
5404163be0
Clean-up MAC address helpers ( #2713 )
2021-11-15 15:48:16 +01:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Oxan van Leeuwen
14299bb2cc
Drop unused constants from const.py ( #2718 )
2021-11-15 08:07:58 +13:00
Oxan van Leeuwen
66cebfc992
Restore InterruptLock on wifi-less ESP8266 ( #2712 )
2021-11-15 08:05:11 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
lcavalli
7bb7456a8b
Update device classes for binary sensors ( #2703 )
2021-11-12 13:17:10 +13:00
Jesse Hills
0372e12b81
Defines tidy ( #2696 )
...
* Move webserver defines inside arduino block
* Move esp8266 flash define
* Move prometheus define
2021-11-11 10:56:54 +01:00
Jesse Hills
a6873c1520
Only allow prometheus when using arduino ( #2697 )
2021-11-11 10:56:35 +01:00
Jesse Hills
f11220da3a
Remove my.ha links from improv ( #2695 )
2021-11-11 15:15:37 +13:00
Oxan van Leeuwen
bb9793d5b7
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 11:53:25 +13:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Carlos Garcia Saura
abf3708cc2
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 11:28:45 +13:00
Jesse Hills
4395d6156d
Fix template number initial value being NaN ( #2692 )
2021-11-10 23:24:48 +01:00
Jesse Hills
04ba53c870
Bump version to 2021.12.0-dev
2021-11-11 10:10:05 +13:00
anatoly-savchenkov
f310cacd41
[ms5611] Re-implement conversion from ADC readings to sensor values ( #2665 )
2021-11-10 22:01:47 +01:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
99c775d8cb
Introduce encode_value/decode_value() template functions ( #2662 )
2021-11-10 19:44:01 +01:00
Oxan van Leeuwen
4d43396835
Clean-up string sanitation helpers ( #2660 )
2021-11-10 19:42:41 +01:00
TVDLoewe
92321e219a
Max7219digit multiline ( #1622 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:41:04 +13:00
Oxan van Leeuwen
c422b2fb0b
Introduce byteswap helpers ( #2661 )
...
* Backport std::byteswap() in helpers.h
* Introduce convert_big_endian() function
* Use convert_big_endian() in i2c byte swap functions
2021-11-10 19:40:18 +01:00
Otto Winter
8aa72f4c1e
Neopixelbus redo method definitions ( #2616 )
2021-11-11 07:35:31 +13:00
Oxan van Leeuwen
d8e33c5a69
Add repeat action for automations ( #2538 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:30:07 +13:00
Oxan van Leeuwen
15f9677d33
Introduce parse_number() helper function ( #2659 )
2021-11-11 07:15:06 +13:00
Carlos Garcia Saura
219b225ac0
[ESP32 ADC] Add option for raw uncalibrated output ( #2663 )
2021-11-10 19:12:57 +01:00
Oxan van Leeuwen
2ac232e634
Add missing hal.h include in esp32_camera_web_server ( #2689 )
2021-11-10 19:09:10 +01:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Martin
662773b075
modbus_controller: remove hard coded register size ( #2654 )
2021-11-10 16:24:44 +13:00
Carlos Garcia Saura
875b803483
Remove "delay_microseconds_accurate()" and improve systemwide delayMicroseconds() ( #2497 )
2021-11-10 16:22:00 +13:00
Guillermo Ruffino
6e5cfac927
fix rc switch protocol 6 ( #2672 )
2021-11-10 16:15:15 +13:00
Duncan Findlay
97eaf3d4a1
Set up output_switch at priority DATA instead of HARDWARE. ( #2648 )
2021-11-10 16:12:20 +13:00
cvwillegen
366552a969
Remote base add pronto protocol ( #2619 )
2021-11-10 16:11:35 +13:00
Guillermo Ruffino
57b07441a1
fix esp32 rmt receiver item array length ( #2671 )
2021-11-10 13:15:02 +13:00
Kamil Trzciński
fb57ab0add
Add esp32_camera_web_server: to expose mjpg/jpg images ( #2237 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-10 13:10:07 +13:00
Jesse Hills
d6717c0032
Fix dashboard imports for adoption ( #2684 )
2021-11-10 08:38:20 +13:00
ychieux
f72389147d
SSD1306_base: Add support for 64x32 size and fix flip functions ( #2682 )
...
* Add support for SSD1306 OLED display 0.42inch 64x32 and fix a typo in __init__.py preventing flip functions to operate as intended
* convert tab to spaces
* fix typo on filename for __init__.py
2021-11-09 18:47:19 +01:00
Jesse Hills
a509f6ccd2
Fix when package url has no branch/ref ( #2683 )
2021-11-09 17:14:08 +13:00
Martin
add484a2ea
Fix gpio validation for esp32 variants ( #2609 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-09 07:29:28 +13:00
Paul Monigatti
a17a6d5346
Add HA Entity Category support to MQTT ( #2678 )
2021-11-08 10:03:30 +01:00
Maurice Makaay
be9439f10d
Fix for encrypted DSMR regression ( #2679 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-07 20:39:16 -03:00
Maurice Makaay
96a50f5c6b
Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino ( #2677 )
...
* Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino
* Make inclusion of the SPI library unconditional
As suggested by @Oxan. Because the component requires Arduino anyway, there is no need to make the inclusion conditional.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Fix Python lint issue
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-07 19:31:41 +01:00
Jesse Hills
3c0414c420
Add Entity categories for Home Assistant ( #2636 )
2021-11-08 07:24:52 +13:00
Maurice Makaay
b450d4c734
Fix CRC error during DSMR chunked message reading ( #2622 )
...
* DSMR chunk size from 50 to 500
* Still a few CRC errors with 500, upping to 1024.
* Adding timers to measure how long processing DSMR takes
* Handle chunked output from smart meter.
* Cleaning up and commenting the new chunk handling code
* Remove debug code.
* Fixing clang-tidy issues.
* Implementing chunked reading support for encrypted telegrams.
* Remove redundant extra delay for encrypted reader
* Beware not to flush crypted telegram headers
* Use insane data timeout for testing
* Improve logging
* Make clang-tidy happy
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-06 18:52:04 -03:00
Guillermo Ruffino
d536509a63
Allow esp8266 to compile with no wifi ( #2664 )
2021-11-05 10:52:38 +13:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
niklasweber
379c3e98f5
Add restore_mode to rotary_encoder ( #2643 )
2021-11-03 07:32:24 +13:00
Carlos Garcia Saura
d54b4e7c44
Fix for noise in pulse_counter and duty_cycle components ( #2646 )
2021-11-02 08:27:57 +13:00
Jesse Hills
d8b3af3815
Expose webserver_port to the native API ( #2640 )
2021-11-01 09:33:04 +13:00
Otto Winter
2b04152482
Fix deep sleep invert_wakeup mode ( #2644 )
2021-10-31 16:07:06 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Geoffrey Van Landeghem
7eee3cdc7f
convert SCD30 into Component, polls dataready register ( #2308 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-10-31 15:29:22 +13:00
Ed
696643d037
BH1750: Fix a too high default H-res2 mode value ( #2536 )
2021-10-29 11:51:57 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Martin
2350c5054c
use update_interval for sntp synchronization ( #2563 )
...
* use update_interval for sntp synchronization
* revert override of default interval
2021-10-28 20:57:39 +02:00
Jesse Hills
73accf747f
Allow cloning/fetching Github PR branches in external_components ( #2639 )
2021-10-29 07:12:05 +13:00
Alex Iribarren
0d3e6b2c4c
Expose web_server port via the API ( #2467 )
2021-10-28 11:46:55 +13:00
Sean Brogan
2147bcbc29
Remove autoload of xiaomi_ble and ruuvi_ble ( #2617 )
2021-10-28 09:16:12 +13:00
niklasweber
980c2d4cae
Add publish_initial_value option to rotary encoder ( #2503 )
2021-10-28 08:09:37 +13:00
Jesse Hills
c2623a08e3
Fix select.set using lambda ( #2633 )
2021-10-27 08:27:51 +13:00
Jan Čermák
9f625ee7d1
Fix pin number validation for sn74hc595 ( #2621 )
2021-10-26 18:10:45 +02:00
