* Add support for ltr390
* Fix linting errors
* Fix more linting errors
* Linting fixes continued
* Linting forever
* Another one
* Fix regression and linting
* Fix narrowing conversion
* Add test and bugfix
* Add codeowners
* Update CODEOWNERS
* Update sensor defs
* Reformatted with black
* Fixed device class import
* Update CODEOWNERS
* Update CODEOWNERS
* Adding all config options
As requested https://github.com/esphome/esphome/pull/1505#discussion_r597326897
* Moving test to different config file
test1.yml runs out of memory
* Update according to comments
* Add safety clause to reading modes
* Fix clang-tidy complaint
* Revert change to i2c component
* Fix for changes in dev
* Revert "Revert change to i2c component"
This reverts commit 2810df59e9.
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Prevent underscore character being used in 'name'.
* Restrict underscores in hostnames, not all names.
* Use hostname validator for node name.
* Allow underscore in hostname but warn once.
* Add renaming instructions link to warning.
* Point underscore warning to FAQ section
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added an option to disable mDNS
* Fixed linter issues
* Moved the enable_mdns option to WiFi and Ethernet components
* extracted common method for add mdns library
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Start of SGP40 dev
* Clean up
* Initial Commit
* VOC is working
* Fixed up sensor config
* Lint Fixes
Added in save/restore baseline
Noted original repo in header
* Lint Fixes
Added to test
* Lint Fixes
* Added additional check on restoring
* Removed double check
* Changed defines to static const double
* Changed defines to const
Do not send voc index until sensor stabilizes
* Fixed sensor stabilization message
* Fixup according to PR
* samples_read increment fix
* Fixed missing device class
* Choose a SENSOR device class
* Moved some sensors for tests
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Add fan speed percentage support to the API
* Add float fan speed percentage
* Add percentage support to automation and configuration
* Update Tuya fan
* Fix pylint warning
* Update API to use speed levels instead of percentage
* Use speed levels
* Fix type warnings
* MQTT component now converts between speed levels and enums
* Webserver now supports speed_level
* Update prometheus
* Remove low/medium/high settings from speed fan
* Remove unused enum
* Configurable speed levels for speed fan
* Remove unused import
* Rename speed_level->speed and speed_levels->speed_count
* Rename supported_speed_levels -> supported_speed_count in API and FanTraits
Field id stays the same in the protocol, so the change is not breaking for aioesphome.
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
* Added support for SM300D2 sensor module
* Fixed lint errors due to added tvoc config
* add device class
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Migrate ESPColor to Color
* color.h constructor fix
* Updated componets to use Color
Added a using for ESPColor
* Lint fixes
* Fixed value error
* Update display components to use colorutil
* Updated to latest PR comments
* Fixed COLOR_WHITE
* Moved esp_scale to color_utils
* Rename color_utils to display_color_utils
* Added samsung36 ir protocol
* Make linter happy
* Added test and fixed python failure
* Sorry for the commits but linter was still not happy :)
* Okay have to run script/clang-format -i
Co-authored-by: tuxBurner <tuxBurner@boggo.de>
* Added vl53l0x change address and timeout
* Added vl53l0x change address and timeout
* vl53l0x code cleanup and update test
* remove executable bit
* lint code cleanup
* code review fixes including timeout default to 10ms
* Code review cleanup and change a WARN log level message to DEBUG
* Fix issue where warn should be temporary
* Added name of sensor to warning message
* Fix blacklist lint issue
* Remove unused import
* Add constants for sensor device_class
* Add device_class attribute to sensor component
* Add device_class attribute to sensor class
* Add device_class to mhz19 temperature sensor
* Add device_class to sensor in api component
* Add test for device_class of sensor
* Rename DEVICE_CLASS_NONE to DEVICE_CLASS_EMPTY for consistency
* Make optional attributes of sensor component truly optional
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Update to new color API and added test
* Check fixes
* Fixed sid length in test
* Cleaned up whitespaces
* kbx81 recommended fixes
* test fix
* Fixes of fixes
* Fixed test1.yaml
* Fixed test1.yaml
* Changed digital pin #s to gpio
* Updated to match kbx's color names
* Typo for ST7735_INITR_MINI_160X80
* Updated 8bit color space code
Added to_rgb_332 to color.h
fixed typo
* Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale
* Fixed MADCTL
* Fixp MADCTL
* Implemented usrbgr option
updated color to support 332 bgr conversion
typo fix
* Updated to_bgr_332
* Fix up for clang
* FIx up init code. type in buffer caused overrun
* fixup protected names
* typos
* Matched use_bgr to its conf
* color.h red fix in bgr_233to_rgb_565
* Fix ST7735_INITR_MINI_160X80
* Renamed bgr_233to_bgr_565 to match its function
Color space leak in bgr_233to_bgr_565.
cleaned up init code for displays.
* Fix
* clang fix
* Started Color Conversion
* Added various bit color functions
add triadto
* lint changes
* Various fixes
* Various formatting fixes. Wish my checks worked!
* Updated color api to support different formats
removed to_rgb_565
* lint clang fixes
* Test1 fix
* test1.yaml fix
* fixed 565 in ILI9341Display
* Added CodeOwners
* Updated CODEOWNERS
* changed to to332 and to565
* Waiting for color.h changes
* Stage changes
* Removed all changes except this driver
* Moved color functions into driver
* lint changes
* Lint and removed unrelated display driver changes
* Lint changes
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Update to new color API and added test
* Check fixes
* Fixed sid length in test
* Cleaned up whitespaces
* kbx81 recommended fixes
* test fix
* Fixes of fixes
* Fixed test1.yaml
* Fixed test1.yaml
* Changed digital pin #s to gpio
* Updated to match kbx's color names
* Typo for ST7735_INITR_MINI_160X80
* Updated 8bit color space code
Added to_rgb_332 to color.h
fixed typo
* Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale
* Fixed MADCTL
* Fixp MADCTL
* Implemented usrbgr option
updated color to support 332 bgr conversion
typo fix
* Updated to_bgr_332
* Fix up for clang
* FIx up init code. type in buffer caused overrun
* fixup protected names
* typos
* Matched use_bgr to its conf
* color.h red fix in bgr_233to_rgb_565
* Fix ST7735_INITR_MINI_160X80
* Renamed bgr_233to_bgr_565 to match its function
Color space leak in bgr_233to_bgr_565.
cleaned up init code for displays.
* Fix
* clang fix
* Started Color Conversion
* Added various bit color functions
add triadto
* lint changes
* Various fixes
* Various formatting fixes. Wish my checks worked!
* Updated color api to support different formats
removed to_rgb_565
* lint clang fixes
* Test1 fix
* test1.yaml fix
* fixed 565 in ILI9341Display
* Added CodeOwners
* Updated CODEOWNERS
* changed to to332 and to565
* Waiting for color.h changes
* Stage changes
* Removed all changes except this driver
* Moved color functions into driver
* lint changes
* Lint and removed unrelated display driver changes
* Lint changes
* Updated with latest color api
* pulled from origin
* Updated for color.h changes
* pulled test1 from dev
* Added test
* Fix some Tuya devices not handling commands sent without delay
* Also do not report WiFi status if MCU does not support it
* Support Tuya MCU 0x1c command (obtain local time)
* Use #ifdef USE_TIME to handle optional dependency on RTC
* Rename Tuya clock config variable to time to be consistent with the codebase
* Add tuya time configuration to test4
* Hbridge Christmas light component
Can be used for Christmas lights that use 2 wires to run 2 different strings of lights using a hbridge driver.
* Add Test
NOTE: I am unable to test this via the docker image
* Update hbridge_light_output.h
* Update hbridge_light_output.h
* Update hbridge_light_output.h
* Update light.py
* Fixed duty as white value bug fixed
* lint changes
* Name case change
* thanks lint
* WIP: Advanced commands for portisch firmware
* Fix string code sending
* clang formatting
* Add new rf_bridge functions to test
* Add advanced code received trigger
* Fix copy-paste mistake in the advanced sending
* Fix log message to be consistent
* clang
* Remove extra +
* fix: FastLED SPI_DATA_RATE being truncated to 8 bits
FastLED expects SPI_DATA_RATE as an uint32_t, but we had it as uint8_t.
Fix that to avoid the data rate being truncated.
* fastled: allow specifying data rate
Previously, we've just taken the default data rate from FastLED.
However, that does not always work properly. In my case, I had a
slow level shifter that couldn't keep up with the 1 MHz data
rate default for WS2801. Long cabling might also be a reason why
one might want to reduce the data rate.
This will add a new optional "data_rate" config option where one
may specify the desired data rate as a frequency:
light:
- platform: fastled_spi
chipset: WS2801
data_pin: GPIO23
clock_pin: GPIO22
data_rate: 500kHz
num_leds: 178
* Move pn532 -> pn532_spi
Add pn532_i2c
* Update i2c address
* Always wait for ready byte before reading
* Generalise the pn532 a bit more so less code in i2c and spi implementations
* clang
* Add pn532_i2c to test1
* Try to get setup working
* Fixes
* More updates
* Command consts
* A few upgrades
* Change text back to include 'new'
* Fix data reading
* Added tmp102 temperature sensor support
* Added sensor to test3.yaml
* Moved docstring to component root
* Tweak formatting from clang-format script
* Removed extra newline at the end of the file to satisfy pylint
* Update schema to match that of other single-value sensors
In ESPHome, sensors that only expose one value do not put the sensor under another key.
* Add missing import
* Fix test after structural change to component
* removed unused setting
* Update esphome/components/tmp102/tmp102.cpp
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Started to work on packages feature
* Added some more validation to packages config
* Fixed some linter warnings
* Updated tests
* Reordered consts to avoid linter error
* Reordered consts to avoid linter error
* Refactored test yaml files to integrate into existing test pipeline
Co-authored-by: Dmitry Berezovsky <dmitry.berezovsky@logicify.com>
* Start support for tuya climate devices
* Add tuya climate to test4
* Fix lint and cast
* Remove blank line
* Try to display accurate action based on observed behaviour.
* Fix action when in off mode
* Improve config dump
* merge use of CONF_SWITCH_DATAPOINT
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update vl53l0x_sensor.cpp
Changed values for long range support
* added true / false option for long range detection
* debug missing ,
* further debug option long_range
* Travis updates
* added travis tests
* Travis removed space should be good now
* update to trigger travis again
* added old test files for PR
* added vl5310x sensor for compile testing
* fix variable names
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* TFT-LCD ST7789V of ESP32 TTGO.
This patch allows you to use TFT-LCD ST7789V of ESP32 TTGO
* Lots of polish and a few tweaks
* Add test
* Add color to core, take 1
* Where did those tabs come from?
* Fix lines too long
* Added color component
* Linted
* Rebase, SPI fix, test
* Shuffle bits
* One more thing...oops
* Image type fix...oops
* Make display_buffer use Color
* Fix BGR/RGB, remove predefined colors
* Fix all the things
* renamed colors to color
* migrate max7219
Co-authored-by: musk95 <musk95@naver.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* push final files
* Update max7219digit.cpp
reenter small bug fix on uint8 declaration
* small debug
* set max offset to 100
* remove unwanted file
* Update font file to make travis happy
* travis update
* further progress in keeping Yarvis happy
* travis font
* travis will never be satisfied but one step ahead
* YARVIS TAKE 10000000
* never ending yarvis
* Almost there with Yarvis
* removed double declaration YARVIS
* added namespace to font file (TRAVIS)
* almost there last changes for YARVIS
* further travis updates
* removed files for travis
* fix display.py length of line travis remark
* further update on display.py
* file delete travis requirement
* final entry for travis?
* Some further debug on max offset
* Travis updates
* scroll_left_new
* 90degreesrotate
* added option to config rotate90
* four orientations for the chips
* new setup for scroll
* replaced small bug missing {}
* debug changed int8 to int16 on scroll function
* removed small merge failure
* travis updates round 1
* travis updates round 2
* travis details round 3
* added options to set scroll parameters in yaml conf
* removed ttf and png to satisfy travis
* travis update
* travis updates
* travis
* further updates after input from @glmnet
* remove deleted comments
* Added ENUM TYPE to config file
* change in test file
* removed test files
* updates for pull request
* Typing error removed
* travis update
* PR updates travis
* Update test3.yaml
* Update test3.yaml
* update device schema as per #988
* Delete partitions.csv
* repair on image display and invert routine
* further update and a bit of cleanup
* added writing 0 in draw pixel
* small deletion error
* travis updates
* Update max7219digit.cpp
adding intensity value to dynamically set value
* Update max7219digit.h
adding option for intensity
* remove some files from tests
* add support for SN74HC595 shift register
* fix linter errors
* more linter reported issues fixed
* hopefully last linter error cleanup
* one more linter fix
* looks like the linter is always keeping stuff for later, is this the final fix?
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Add LG Climate ir
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
Co-authored-by: Sangheon Heo <square99@SangHeonui-Macmini.local>
* Add fan support to bang bang controller
* Fix heat-only and cool-only modes
* Added support for all climate actions and modes
* Fix up some comments
* Fan_only mode behavior tweak
* Updated test
* Updated test, take 2
* Add accessor methods for easier use in lambadas
* Revert "Add accessor methods for easier use in lambadas"
This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.
Don't code late at night when sleepy.
* Fix single/dual setpoint support
* Linted
* Properly implement single-point, validation improvements
* Another quick fix...sigh
* Update tests
* Update tests, take 2
* Revert "Update tests, take 2"
This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.
Nope.
* Revert "Update tests"
This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.
Nope 2.
* Updated/fixed tests
* Revert "Updated/fixed tests"
This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.
Taking a different approach.
* Revert "Another quick fix...sigh"
This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.
Taking a different approach.
* Revert "Properly implement single-point, validation improvements"
This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.
Taking a different approach.
* Single/dual set point fixes, full validation
* Fix test
* Fix restore-on-boot, clean up comments
* Decouple two-point/auto operation, more polish
* One last away mode tweak
* Added set point validation
* Clean up over-publishing, always call action after boot
* Add fan support to bang bang controller
* Fix heat-only and cool-only modes
* Added support for all climate actions and modes
* Fix up some comments
* Fan_only mode behavior tweak
* Updated test
* Updated test, take 2
* Add accessor methods for easier use in lambadas
* Revert "Add accessor methods for easier use in lambadas"
This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.
Don't code late at night when sleepy.
* Fix single/dual setpoint support
* Linted
* Properly implement single-point, validation improvements
* Another quick fix...sigh
* Update tests
* Update tests, take 2
* Revert "Update tests, take 2"
This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.
Nope.
* Revert "Update tests"
This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.
Nope 2.
* Updated/fixed tests
* Revert "Updated/fixed tests"
This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.
Taking a different approach.
* Revert "Another quick fix...sigh"
This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.
Taking a different approach.
* Revert "Properly implement single-point, validation improvements"
This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.
Taking a different approach.
* Single/dual set point fixes, full validation
* Fix test
* Fix restore-on-boot, clean up comments
* Decouple two-point/auto operation, more polish
* One last away mode tweak
* Added set point validation
* Clean up over-publishing, always call action after boot
* Added refresh() function to allow easy on-device state refreshing
* Fix fan oscillation trait not being used
* Add fan direction support to SpeedFan
* Add fan direction to API
* Add fan direction support to BinaryFan
* Fix CI errors
* Fix python format
* Change some ordering to trigger CI
* Add test for the configuration
A component to support [WLED](https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control).
This allows to control addressable LEDs over WiFi/UDP, by pushing data right into LEDs.
The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.
It supports all WLED protocols:
- WARLS
- DRGB
- DRGBW
- DNRGB
- WLED Notifier
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
This adds a `e131` component that allows
to register `e131` addressable light effect.
This uses an internal implementation that
is thread-safe instead of using external libraries.
* Extend `uart:` with `rx_buffer_size:`
This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART
* lint
* remove old default value
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* uart: Add support for specifying the number of bits and parity.
ESP8266SwSerial doesn't really check parity but just read the parity bit
and ignore it when receiving data.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: support begin and end methods.
A component may need to reset uart buffer/status by using begin() and
end() methods. This is useful for example when a component needs to be
sure it is not reading garbage from previously received data over uart.
For end() methods with software serial, disabling interrupt is
currently impossible because of a bug in esp8266 Core:
https://github.com/esp8266/Arduino/issues/6049
Signed-off-by: 0hax <0hax@protonmail.com>
* esphal: add support for detaching an interrupt.
That's needed when a component needs to enable/disable interrupt on a
gpio.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: rename CONF_NR_BITS to CONF_DATA_BITS_NUMBER.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: use static const uint32_t instead of #define.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: use an enum to handle parity.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: split between esp32 and esp8266.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: check_uart_settings for parity and number of data bits.
Signed-off-by: 0hax <0hax@protonmail.com>
* name param data_bits
* add new params to test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Added ble_scanner component
* ble_scanner: time.h changed to ctime
* ble_scanner: Test added.
* ble_scanner: fixed code formatting.
* Removed duplicate binary sensor tests from test2 and test3 to decrease memory requirements.
* Removed another duplicate test from test2.yaml and moved stepper test to yaml3.yaml to reduce memory requirements of test2.yaml.
* Reverted the last stepper test change
* Moved some sensor tests from test2.yaml to test3.yaml to save memory.
* Moved ruuvitag back to test2.yaml as it requires component esp32_ble_tracker.
* removed apds9960 as it is duplicated
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* esp32_ble_tracker: introduce UUID comparison function
* ble_presence, ble_rssi: use new UUID comparison function
* esp32_ble_tracker: introduce automation on BLE advertising
* test2.yaml: remove deep_sleep due to firmware size restrictions
* wip
* transmitter ready
* climate.whirlpool receiver implemented (#971)
* receiver implemented
* Support for two models of temp ranges
* temperature type and lint
* more lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* add test
* not mess line endings
Co-authored-by: mmanza <40872469+mmanza@users.noreply.github.com>
* Basic pytest configuration
* Added unit_test script that triggers pytest
* Changed "fixtures" to fixture_path
This is consistent with pytest's tmp_path
* Initial unit tests for esphome.helpers
* Disabled coverage reporting for esphome/components.
Focus initial unittest efforts on the core code.
* Migrated some ip_address to hypothesis
* Added a hypothesis MAC address strategy
* Initial tests for core
* Added hypothesis to requirements
* Added tests for core classes
TestTimePeriod
Lambda
ID
DocumentLocation
DocumentRange
Define
Library
* Updated test config so package root is discovered
* Setup fixtures and inital tests for pins
* Added tests for validate GPIO
* Added tests for pin type
* Added initial config_validation tests
* Added more tests for config_validation
* Added comparison unit tests
* Added repr to core.TimePeriod. Simplified identifying faults in tests
* Fixed inverted gt/lt tests
* Some tests for Espcore
* Updated syntax for Python3
* Removed usage of kwarg that isn't required
* Started writing test cases
* Started writing test cases for cpp_generator
* Additional docs and more Python3 releated improvements
* More test cases for cpp_generator.
* Fixed linter errors
* Add codegen tests to ensure file API remains stable
* Add test cases for cpp_helpers
* Add AC Dimmer support
Fixes https://github.com/esphome/feature-requests/issues/278
* fixes
basically missed the output pin setup and in the switching was switching true true true :P
* Format
* Enable ESP32
* Also setup ZC pin
* Support multiple dimmers sharing ZC pin
* Fix ESP32
* Lint
* off gate on zc detect
* tests pins validation
* Climate Mitsubishi (#725)
* add climate
* Mitsubishi updates
* refactor mitsubishi to use climate_ir
* lint
* fix: only decode when not str already (#923)
Signed-off-by: wilmardo <info@wilmardenouden.nl>
* fix climate-ir bad merge (#935)
* fix climate-ir bad merge
* add mitshubishi test
* http_request: fix memory allocation (#916)
* http_request version fix (#917)
* PID Climate (#885)
* PID Climate
* Add sensor for debugging PID output value
* Add dump_config, use percent
* Add more observable values
* Update
* Set target temperature
* Add autotuner
* Add algorithm explanation
* Add autotuner action, update controller
* Add simulator
* Format
* Change defaults
* Updates
* Use b''.decode() instead of str(b'') (#941)
Handling of request arguments in WizardRequestHandler is not decoding
bytes and rather just doing a str conversion resulting in a value of
"b''" being supplied to the wizard code.
* Adding the espressif 2.6.3 (#944)
* extract and use current version of python 3 (#938)
* Inverted output in neopixelbus (#895)
* Added inverted output
* Added support for inverted output in neopixelbus
* Update esphome/components/neopixelbus/light.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update light.py
* corrected lint errors
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added degree symbol for MAX7219 7-segment display. (#764)
The ascii char to use it is "~" (0x7E).
Disclaimer: I didn't test this yet.
* Fix dump/tx of 64 bit codes (#940)
* Fix dump/tx of 64 bit codes
* fixed source format
* Update hdc1080.cpp (#887)
* Update hdc1080.cpp
increase waittime, to fix reading errors
* Fix: Update HDC1080.cpp
i fixed the my change on write_bytes
* add tcl112 support for dry, fan and swing (#939)
* Fix SGP30 incorrect baseline reading/writing (#936)
* Split the SGP30 baseline into 2 values
- According to the SGP30 datasheet, each eCO2 and TVOC baseline is a 2-byte value (MSB first)
- The current implementation ignores the MSB of each of the value
- Update the schema to allow 2 different baseline values (optional, but both need to be specified for the baseline to apply)
* Make both eCO2 and TVOC required if the optional baseline is defined
* Make dump_config() looks better
* Add register_*_effect to allow registering custom effects (#947)
This allows to register custom effect from user components,
allowing for bigger composability of source.
* Bugfix/normalize core comparisons (and Python 3 update fixes) (#952)
* Correct implementation of comparisons to be Pythonic
If a comparison cannot be made return NotImplemented, this allows the
Python interpreter to try other comparisons (eg __ieq__) and either
return False (in the case of __eq__) or raise a TypeError
exception (eg in the case of __lt__).
* Python 3 updates
* Add a more helpful message in exception if platform is not defined
* Added a basic pre-commit check
* Add transmit pioneer (#922)
* Added pioneer_protocol to support transmit_pioneer
* Display tm1637 (#946)
* add TM1637 support
* Support a further variant of Xiaomi CGG1 (#930)
* Daikin climate ir component (#964)
* Daikin ARC43XXX IR remote controller support
* Format and lint fixes
* Check temperature values against allowed min/max
* fix tm1637 missing __init__.py (#975)
* Add AC Dimmer support
Fixes https://github.com/esphome/feature-requests/issues/278
* fixes
basically missed the output pin setup and in the switching was switching true true true :P
* Format
* Enable ESP32
* Also setup ZC pin
* Support multiple dimmers sharing ZC pin
* Fix ESP32
* Lint
* off gate on zc detect
* tests pins validation
* fix esp8266 many dimmers, changed timing
* Increased value resolution, added min power
* use min_power from base class
* fix min_power. add init with half cycle
* added method for trailing pulse, trailing and leading
* fix method name. try filter invalid falling pulse
* renamed to ac_dimmer
* fix ESP32 not configuring zero cross twice
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Wilmar den Ouden <wilmardo@users.noreply.github.com>
Co-authored-by: Nikolay Vasilchuk <Anonym.tsk@gmail.com>
Co-authored-by: Tim Savage <tim@savage.company>
Co-authored-by: Vc <37367415+Valcob@users.noreply.github.com>
Co-authored-by: gitolicious <mrjchn@gmail.com>
Co-authored-by: voibit <krestean@gmail.com>
Co-authored-by: Luar Roji <cyberplant@users.noreply.github.com>
Co-authored-by: András Bíró <1202136+andrasbiro@users.noreply.github.com>
Co-authored-by: dmkif <dmkif@users.noreply.github.com>
Co-authored-by: Panuruj Khambanonda (PK) <pk@panurujk.com>
Co-authored-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Mario <4376789+mario-tux@users.noreply.github.com>
Co-authored-by: Héctor Giménez <hector.fwbz@gmail.com>
* add energy support in pzemac sensor
Co-authored-by: Sergio Mayoral Martinez <sergiomayoralmartinez@gmail.com>
Co-authored-by: t151602 <sergio.mayoralmartinez@telefonica.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add RFBridge component
* Fix format issues
* Rename methods
* More formatting
* Fix line length
* Apply suggestions from code review
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Check uart settings on dump
* Make receiving local to the loop
* FIx code order and schema
* Add rf_bridge to test file
* Apply suggestions from code review
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Add support for Sensirion SPS30 Particulate Matter sensors
* Remove blocking of the main thread on initialization;
Improve wording on the debug messages;
Add robustness in re-initialization of reconnected or replaced sensors;
* Fix code formatting;
Co-authored-by: Nad <valordk@github>
* Add QMC5883L and Updated HMC5883L
* add tests
* changed to oversampling
* fix pylint
* fix private method
* typo fix
* fix protected method
* Clean up code and PR recomendations
* fix tests
* remote file
* fix qmc oversampling unit
* Remove hmc5883l config logging
Either the units are converted to the user values like 1x, 8x oversampling or not printed at all. Printing the machine-value of these is only confusing users.
* Changes for validate_enum
Move stuff that can be done beforehand out of the bound function, use text_type for py2/3 compatability.
* Remove unused constant
* Remove duplicate tests
* Repeat remove config print
* remove changes to test2 since bin is to large
* Add comment to HMC5583L
Co-authored-by: Timothy Purchas <timothy@TPF.local>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added more data to atm90e32 component
* ignore
* correction
* Delete 6chan_energy_meter.yaml
* PR request changes
* repository test branch
* Update setup.py
* Update const.py
* delete test yaml
* fix chip_temperature_sensor
This was throwing an error if chip_temperature was used. It needed to be changed from temp to temperature.
* default
* Update test1.yaml
* implemented ruuvi_ble and ruuvitag with RAWv1 protocol
fixesesphome/feature-requests#313
* lint
* updated data calculations
* cpp lint
* use string directly in message
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* add RAWv2 protocol support
* fix ICON_SIGNAL
* typo
* calculation correction and cleaning
* c++ lint
* added acceleration and fixed typo
* removed remote_receiver to reduce firmware size
remote_receiver also in test1.yaml
* Add MAX31865 sensor support, fix MAX31855 sensor.
# MAX31865
Added support for the MAX31865 RTD-to-Digital Converter to measure PT100 and
similar RTDs. Verified with an Adafruit unit (product ID: 3328) and a PT100
probe.
# MAX31855
This was setup for incorrect SPI clock polarity and phase, and would return bad
data due to a race condition measuring on the wrong edge (verified with Saleae
Logic scope). Selecting the correct configuration fixes that problem.
Re-wrote the decode off the datasheet to handle error states better (sends NaN
as an update on failure to read temperature, which shows the value as Unknown
in Home Assistant).
Added the *optional* ability to monitor the internal high-precision temperature
sensor, which can be nice in some applications.
* Tests for MAX31855/MAX38165.
* Update style to match project rules.
Also fix CONF_REFERENCE_RESISTANCE and CONF_REFERENCE_TEMPERATURE being defined
multiple places. Missed this when I added them to const.py.
* Update style to match project rules.
Pylint line limit 101/100 ("missed it by that much").
Also apparently I can't read and patched the wrong line in max31855.cpp.
* Minor string/style cleanup.
There was a copy-paste leftover in max31855.cpp and max31865/sensor.py had
unnecessary whitespace.
* Improve MAX31865 fault detection and logging.
Log levels are more in-line with the documented descriptions.
Fault detection code is improved. A transient fault between reads is still
reported, but now only faults *during* a read cause the sensor to fail and
return NAN ("unknown" in Home Assistant).
* Update style to match project rules.
I just now realized the .clang-format and pylintrc files are included. D'oh!
* MAX31855 & MAX31865 code style alignment.
@OttoWinter caught some style mismatches, updated to match project better.
* Fix a lost '\' in max31865/sensor.py.
* Add support for Sensirion STS3x Temperature sensors
* Removed humidty reading from STS3x sensor
* Fixed line error and operand error
* Fixed syntax
* Add test snippet for STS3x sensor
* Clean up
* #550 Proactive fix for STS3x component reporting WARNING status and reinitialzing similar to SHT3xd
* Flattened config.
* Fixed missing temperature unit
* Code formatting
* Added marking for future commands
* Cleanup
* Removed whitespace
* Cleanup
* Cleanup
* Add support for Sensirion STS3x Temperature sensors
* Removed humidty reading from STS3x sensor
* Fixed line error and operand error
* Fixed syntax
* Add test snippet for STS3x sensor
* Clean up
* Add support for Sensirion SHTC1 and SHTC3 Temperature sensors
* Fixed the test
* Fix lint issues
* Update esphome/components/shtcx/shtcx.cpp
Good point.
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Refactored device type identification and logging
* Refactoring and cleanup
* Remove sts3x
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add support for SGP30 eCO2 and TVOC sensors
* Added test for SGP30
* Lint issues fixed
* Lint fixes
* Fixed light lengths
* Cleanup
* Add support for Sensirion SCD30 CO2 sensors
* Fixed few lint issues
* Lint fixes
* Fixed line ending for lint
* Cleanup
* Refactored float conversion
* Refactor unnecessary return
* Refactoring and cleanup
* Updated uptime_sensor_ referencing and simplified checking on availability of copensation
* Temperature and Humidity source moved to a separate compensation block; Dependency for Uptime sensor removed.
* Both humidity_source and temperature_source are now mandatory if the compensation block is defined;
* Clean up
* Cleanup
* Cleanup in search of perfection
* Use correct comment style
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add ssd1325 component
* fix i2c
* remove ssd1325 i2c
* add test
* set max contrast
* No macros - see styleguide
* Remove invalid function
* Formatting
Co-authored-by: Otto Winter <otto@otto-winter.com>
* refactored xiaomi sensors
* fix lint
* fixed and added tests
* fix namespace
* LYWSD02 has no battery level
* fixed enum
* fix
* fix case
* fix spaces in empty line...
* inform users of old sensors about the change
* Add support for TI TLC59208F
The chip is a 8-BIT FM+ I2C BUS LED DRIVER with
8 open-drain output channels.
Its features include:
- 256 linear levels
- group dimming
- group blinking
- 64 slave addresses
- customizable sub addresses and all call address
- output update on stop or on ACK
- 3.3V or 5V supply with 5V tolerant IO
- no glitch startup
- 50mA / output continuous current up to 17V
* Convert macro to uint8_t
Variables had to be renamed, clang-format would protest against
mixed case in global variable name.
* Change gen-call reset to use the correct i2c bus
* Basic auth
* Test
* Linter fix
* Make username/password strict strings
Reason: passwords only consisting of digits (012345) will be silently converted (to "12345")
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Allow configuration to enable or disable automatic baseline calibration on boot
* Add actions to enable or disable automatic baseline calibration
* Add action to calibrate zero point
* Adding bitmask to narrow compare of received codes
Updated test to add mask configuration
* Lint
* Handle bitmask as ignore characters per review comment
* Fixed test to cover ignore bits
* Lint
* Eliminate separate set_mask method per review comment
* Provide the lights current color to the addressable_lambda_effect.
* Fix formatting
* More formatting
* Change the call signature of the lambda
* lint
Co-authored-by: olg <x>
* Enabling tilt control in the template cover
Added test
Add tilt option to publish action
* Added CONF_TILT to alidation schema per comment
* Removed default for CONF_TILT
* Atmel M90E32AS Energy Metering IC. Found in CircuitSetup 2can and 6chan energy meters
* fix style bugs
* Update esphome/components/atm90e32/atm90e32.cpp
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Properly put atm90e32_reg in namespace
* Use phase grouped config like ina3221
* Log why the component is marked failed, did not read back our register value
* 32bit register reads are 2s compliment
* Fix atm90e32 option name in test
* clang-format changes from travis-ci
* use new protected method names
* Whitespace changes to please Travis
* Update esphome/components/atm90e32/atm90e32.cpp
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Fix up type change for val_h/val_l
* Remove conditions around values with defaults
* Rename constants to match their value
* Remove 2's complement check
Co-authored-by: Andrew Thompson <andrew@whosonlocation.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add CT Clamp component
* Update lint
* Some more fixes
* Make updates to work as an analog sensor consumer
* Remove unused imports
Update lint suggestions
* Move setup_priority to header
* Remove unused calibration value
* Remove Unique ID
- Will be auto generated
* Update to use loop and not slow down main loop
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add binary_sensor_map c code
* add python file
* fixed python and C++ code for new framework
* renamed add_sensor to add_channel
* travis
* Updates
- Use struct for channels_ array - heap allocation is not really necessary here.
- any_active can also be written as mask != 0
- Update setup priority to DATA
- Use shorter TAG (name is already long; not important)
- Quotes around name
- Add icon to sensor
- Use new cv.typed_schema
- Change CONF_CHANNEL to CONF_BINARY_SENSOR - makes it clearer that this option accepts a binary sensor (and not for example an int)
- Add test
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Lint
* add coolix climate ❄ 🔥
* Fixes
* Reviewed
* Fix for dev
ClimateDevice was renamed to Climate
* Remove stale method
* Lint
* Initialize target temperature, avoid NAN value
* Use clamp and round value
* Set to verbose message
Not really relevant to the user
* Remove constructor
Name is now set in climate.register_climate - saves integrations from having to declare a constructor
* Fix, add test
Co-authored-by: Otto Winter <otto@otto-winter.com>
