Previously we ignored any notmuch-search-result-format customizations
for tag formatting because we needed to be able to parse back in the
result line and update the tags in place. We no longer do either of
these things, so we can allow customization of this format.
(Coincidentally, previously we still allowed too much customization of
the tags format, since moving it earlier on the line or removing it
from the line would interfere with the tagging mechanism. There is
now no problem with doing such things.)
Since the result object contains everything that the other text
properties recorded, we can remove the other text properties and
simply look in the plist of the appropriate result object.
This simplifies the traversal of regions of results and eliminates the
need for save-excursions (which tend to get in the way of maintaining
point when we make changes to the buffer). It also fixes some strange
corner cases in the old line-based code where results that bordered
the region but were not included in it could be affected by region
commands. Coincidentally, this also essentially enables multi-line
search result formats; the only remaining non-multi-line-capable
functions are notmuch-search-{next,previous}-thread, which are only
used for interactive navigation.
Now that we keep the full thread result object, we can refresh a
result after any changes by simply deleting and reconstructing the
result line from scratch.
A convenient side-effect of this wholesale replacement is that search
now re-applies notmuch-search-line-faces when tags change.
Previously, tag-based search result highlighting was done by creating
an overlay over each search result. However, overlays have annoying
front- and rear-advancement semantics that make it difficult to
manipulate text at their boundaries, which the next patch will do.
They also have performance problems (creating an overlay is linear in
the number of overlays between point and the new overlay, making
highlighting a search buffer quadratic in the number of results).
Text properties have neither problem. However, text properties make
it more difficult to apply multiple faces since, unlike with overlays,
a given character can only have a single 'face text property. Hence,
we introduce a utility function that combines faces into any existing
'face text properties.
Using this utility function, it's straightforward to apply all of the
appropriate tag faces in notmuch-search-color-line.
notmuch-message-mark-replied used "apply" to change message tags
according to notmuch-message-replied-tags after sending a reply. This
works if the latter is a single-element list. But with the recently
changed format of tag changes, it breaks for multiple-element lists.
Use "funcall" to properly pass the list of tag changes as a single
argument.
The JSON format eliminates the complex escaping issues that have
plagued the text search format. This uses the incremental JSON parser
so that, like the text parser, it can output search results
incrementally.
This slows down the parser by about ~4X, but puts us in a good
position to optimize either by improving the JSON parser (evidence
suggests this can reduce the overhead to ~40% over the text format) or
by switching to S-expressions (evidence suggests this will more than
double performance over the text parser). [1]
This also fixes the incremental search parsing test.
This has one minor side-effect on search result formatting.
Previously, the date field was always padded to a fixed width of 12
characters because of how the text parser's regexp was written. The
JSON format doesn't do this. We could pad it out in Emacs before
formatting it, but, since all of the other fields are variable width,
we instead fix notmuch-search-result-format to take the variable-width
field and pad it out. For users who have customized this variable,
we'll mention in the NEWS how to fix this slight format change.
[1] id:"20110720205007.GB21316@mit.edu"
This parser is designed to read streaming JSON whose structure is
known to the caller. Like a typical JSON parsing interface, it
provides a function to read a complete JSON value from the input.
However, it extends this with an additional function that
requires the next value in the input to be a compound value and
descends into it, allowing its elements to be read one at a time
or further descended into. Both functions can return 'retry to
indicate that not enough input is available.
The parser supports efficient partial parsing, so there's no need to
frame the input for correctness or performance.
The bulk of the parsing is still done by Emacs' json.el, so any
improvements or optimizations to that will benefit the incremental
parser as well.
Currently only descending into JSON lists is supported because that's
all we need, but support for descending into JSON objects can be added
in the future.
Rather than passing lots of arguments and then further passing those
to `notmuch-search-insert-field', pass a plist containing all of the
search result information. This plist is compatible with the JSON
format search results.
This is a simpler place to do this, since we can avoid any point
motion and hence any save-excursions in
`notmuch-search-process-filter', which in turn lets us put all of the
search-target logic outside of any save-excursions.
`notmuch-search-show-{result,error}' are now responsible for their own
point motion.
`notmuch-search-process-filter' could use some reindentation after
this, but we're about to rewrite it entirely, so we won't bother.
This removes the last bit of direct output from the parsing function.
With the parser now responsible solely for parsing, we can swap it out
for another parser.
Previously, much of the display of search lines was done in the same
function that parsed the CLI's output. Now the parsing function only
parses, and notmuch-search-show-result fully inserts the search result
in the search buffer.
This introduces a variable to control after how many characters a line
is wrapped by notmuch-wash-wrap-long-lines (still wrapping at the
window width if it is lower).
Previously the elide messages code got the entire-thread from
notmuch-show.c and then threw away all non-matching messages. This
version calls notmuch-show.c without the --entire-thread flag so
it never receives the non-matching messages in the first place.
This makes it substantially faster.
Allow the user to pipe the attachment somewhere. Bound to '|' on the
attachment button.
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
Previously, the timestamp at the beginning of the FCC unique maildir
name was derived incorrectly, thanks to an integer overflow. This
changes the derivation of timestamp to use a float, and so will get
the number correct at least until 2038. (It is still formatted with
"%d" so it will show up as an integer.) Should we need to change it in
the next 26 years to take the unix millenium into account, it will be
invisible to users.
This change is mostly a question of consistency, since the unique name
is arbitrary anyway. But since most people use timestamps, and that was
the original intention here as well, we might as well.
Signed-off-by: Jesse Rosenthal <jrosenthal@jhu.edu>
It was decided in the thread starting at [0] that it is okay for
notmuch to use 'cl runtime functions. However, by default, these
produce byte compiler warnings. This suppresses those using
file-local variables.
[0] id:"m262g864dz.fsf@wal122.wireless-pennnet.upenn.edu"
When mail message is read from emacs, the message structure
obtained may contain parts which have content included
(`text/plain` for example) and other parts where content is not
included (`text/html` for example).
In case content is included, the string is already available in
emacs' internal format and therefore mm-... functions should not
attempt to do further decoding for the data in temp buffer
provided for it.
Currently when reply buffer is created,
notmuch-mm-display-part-inline () is used to provided quoted reply
content. This change makes the mm-... functions called by it use
'gnus-decoded as charset whenever the content is already available.
File .../emacs-23.3/lisp/gnus/mm-uu.el mentions:
"`gnus-decoded' is a fake charset, which means no further decoding."
The customization widget referred to a non-existing function
`notmuch-hello-insert-query-list'. The patch changes it to the
correct one - `notmuch-hello-insert-searches'. The relevant test is
fixed now.
Sometimes, notmuch reply outputs something to stderr, for example:
"Failed to verify signed part: Cannot verify multipart/signed part:
unsupported signature protocol". When this happens, replying in emacs
fails, because emacs cannot parse the error message as JSON.
This patch causes emacs to ignore stderr when reading reply from
notmuch.
Introduce a new defcustom notmuch-mua-compose-in that allows users to
specify where new mails are composed, either in the current window or
in a new window or frame.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Quote non-text parts nicely by displaying them with mm-display-part
before calling message-cite-original to quote them. HTML-only emails
can now be quoted correctly. We re-use some code from notmuch-show
(notmuch-show-mm-display-part-inline), which has been moved to
notmuch-lib.el.
Mark the test for this feature as not broken.
The main change here is to modify argument parsing so as to not force
tag-changes to be a list, and to let notmuch-tag handle prompting the
user when required. doc strings are also updated and cleaned up.
The main change here is to modify argument parsing so as to not force
tag-changes to be a list, and to let notmuch-tag handle prompting the
user when required. doc strings are also updated and cleaned up.
notmuch-tag is extended to accept various formats of the tag changes.
In particular, user prompting for tag changes is now incorporated
here, so it is common for modes.
The tag binary and the notmuch-{before,after}-tag-hooks are only
called if tag changes is non-nil.
In all cases tag-changes is returned as a list.
Tagging functions are used in notmuch.el, notmuch-show.el, and
notmuch-message.el. There are enough common functions for tagging
that it makes sense to put them all in their own library.
No code is modified, just moved around.
When using the spacebar to scroll through a thread, hitting 'space'
when the bottom of the last message is visible should take the cursor
to the end of the buffer rather than immediately archiving the thread
and moving to the next thread.
Currently emacs show does not open matching but excluded
messages. This is normally the desired behaviour but is probably not
ideal if only excluded messages match. This patch opens all the
matching (necessarily excluded) messages in this case and goes to the
first one.
A previous patch [0] replaced blank subject lines with '[No Subject]'
in search and show mode. Apparently this was needed to circumvent
some bug in the printing code, but there was no need for it search or
show, and it is definitely not desirable, so we undo it here (a revert
is no longer feasible). We should not be modifying strings in the
original message without good reason, or without a clear indication
that we are doing so, neither of which apply in this case. For
further discussion see [0].
[0] id:"1327918561-16245-3-git-send-email-dme@dme.org"
No functional change here. The help message previously referred to
the "delete" tag, but "deleted" is now preferred, so hopefully this
will reduce any potential confusion.
The new message exclude functionality will hide tags that only exist
on excluded messages. However, one might very well want to manually
modify excluded tags. This makes sure tags from excluded messages are
always available in tab completion.
This patch removes trailing spaces in notmuch-hello view.
A side effect of this change is that tag/query buttons no longer
include a space at the end. This means that pressing RET when the
point is at the first character after the tag/query button no longer
works (note that this is the standard behavior for buttons). We may
change this behavior in the future (without adding trailing spaces
back) if people would find this change inconvenient.
Show has to set --exclude=false to deal with cases where it is asked
to show a single excluded message. It uses JSON so it can easily pass
the exclude information to the user.
In the new reply code, the References header gets inserted by
message.el using a function called message-shorten-references. Unlike
all the other header-inserting functions, it doesn't put a newline
after the header, causing the next header to end up on the same
line. In our case, this header happened to be User-Agent, so it's hard
to notice. This is probably a bug in message.el, but we need to work
around it.
This fixes the problem by wrapping message-shorten-references in a
function that inserts a newline after if necessary. This should
protect against the message.el bug being fixed in the future.
Bug 1: Replying from alternate addresses
----------------------------------------
The reply code was inconsistent in its use of symbols and strings for
header names being passed to message.el functions. This caused the
From header to be lookup up incorrectly, causing an additional From
header to be added with the user's primary address instead of the
correct alternate address.
This is fixed by using symbols everywhere, i.e. never using strings
for header names when interacting with message.el.
This change also removes our use of `mail-header`, since we don't use
it anywhere else, and using assq makes it clear how the header lists
are expected to work.
Bug 2: Duplicate headers in emacs 23.2
--------------------------------------
The message.el code in emacs 23.2 assumes that header names will
always be passed as symbols, so our use of strings caused
problems. The symptom was that on 23.2 (and presumably on earlier
versions) the reply message would end up with two of some headers.
Converting everything to symbols also fixes this issue.
Previously, this function took an argument called "message-id", even
though it was a general query, rather than a message ID. This changes
it to "query".
This adds a lib function to turn a message ID into a properly escaped
message ID query and uses this function wherever we previously
hand-constructed ID queries. Wherever this new function is used,
documentation has been clarified to refer to "id: queries" instead of
"message IDs".
This fixes the broken test introduced by the previous patch.
The function notmuch-match-content-type was comparing content types
case sensitively. Fix it so it tests case insensitively.
This fixes a bug where emacs would not include any body when replying
to a message with content-type TEXT/PLAIN.
Use the new JSON reply format to create replies in emacs. Quote HTML
parts nicely by using mm-display-part to turn them into displayable
text, then quoting them with message-cite-original. This is very
useful for users who regularly receive HTML-only email.
Use message-mode's message-cite-original function to create the
quoted body for reply messages. In order to make this act like the
existing notmuch defaults, you will need to set the following in
your emacs configuration:
message-citation-line-format "On %a, %d %b %Y, %f wrote:"
message-citation-line-function 'message-insert-formatted-citation-line
The tests have been updated to reflect the (ugly) emacs default.
In X, Emacs distinguishes the tab key, which produces a 'tab event;
from C-i, which produces a ?\t event. However, in a terminal, these
are indistinguishable and only produce a ?\t event. In order to
simplify things, Emacs automatically translates from 'tab to ?\t (see
"Function key translations" in M-x describe-bindings), so functions
only need to be bound to ?\t to work in all situations.
Previously, the search tab completion code usedq (kbd "<tab>"), which
produced the event sequence [tab], which only matched the 'tab event
and hence only worked in X. This patch changes it to (kbd "TAB"),
which matches the general ?\t event and works in all situations.
The reply MML quoting added in commit ae438cc unintentionally MML
quotes also the signature/encryption MML tags added via
message-setup-hook, causing the reply not to be signed/encrypted.
MML quote just the original message in the temp buffer before
inserting it to the message buffer, to not interfere with message mode
hooks or message construction in general.
See [1] and [2] for bug reports.
Thanks to Tim Bielawa <tbielawa@redhat.com> for testing.
[1] id:"87hay78x6l.fsf@wyzanski.jamesvasile.com"
[2] id:"1330812262-28272-1-git-send-email-tbielawa@redhat.com".
Signed-off-by: Jani Nikula <jani@nikula.org>
This is a small change to make notmuch.el ignore excluded matches. In
the future it could do something better like add a button for
rerunning the search with the excludes (particularly if nothing
matches with the excludes) or having them invisible and allowing the
visibility to be toggled.
Show mode will recognize the exclude flag by not opening excluding
messages by default, and will start at the first matching non-excluded
message. If there are no matching non-excluded messages it will go to
the first matching (necessarily excluded) message.
After retrieving gpg key retain show buffer state like in
all other operations (i.e. no other calls to notmuch-show-refresh-view
provides optional reset-state argument).
Emacs MUA keeps current message under cursor instead of going first
open message(possibly marking it read).
This patch makes the notmuch-hello screen fully customizable
by allowing the user to add and remove arbitrary sections. It
also provides some convenience functions for constructing sections,
e.g. showing the unread message count for each tag.
This is done by specifying a list of functions that will be run
when notmuch-hello is invoked.
It is not clear whether the term "thread" refers to the thread in the
database or to the thread currently shown in a buffer. Those two
meanings may refer to different sets of messages, e.g. when a new email
is added to the database while the buffer shows the state before the new
email arrived.
This patch replaces the term thread with the term current buffer, which
is hopefully less ambiguous.
The behavior of the header line in show-mode changed from showing the
subject of the first open message to showing the subject of the first
message in 4d77f18b. Update a comment to reflect this.
Consensus seems to be that people prefer that refreshing show buffers
retains state by default, rather than resetting it by default. This
turns out to be the case in the code, as well. In fact, there's even
a test for this that's been marked broken for several months, which
this patch finally gets to mark as fixed.
If we retain state while refreshing a show buffer, it should not mark
any messages read since it's not a navigation operation (it especially
shouldn't mark the first message matching the query read, which is
what it did previously). If the user or caller requests that refresh
reset the state of the buffer, then we consider that a navigation
operation, so we do mark the message under point after the refresh
read.
This is implemented by moving responsibility for initial positioning
and read-marking out of notmuch-show-worker and into its caller.
Since notmuch-show-worker is now exclusively about building the show
buffer, we rename it to notmuch-show-build-buffer.
* emacs/notmuch-show.el
(notmuch-show-stash-mlarchive-link-alist):
New defcustom of type `alist' (key = name, value = URI),
containing Mailing List Archive URI's for searching by Message-Id.
(notmuch-show-stash-mlarchive-link-default):
New defcustom, default MLA to use when `notmuch-show-stash-mlarchive-link'
received no user input whatsoever. Available choices are generated using
the contents of `notmuch-show-stash-mlarchive-link-alist'.
(notmuch-show-stash-map):
Added keybinds "l" and "L" for `notmuch-show-stash-mlarchive-link'
respectively `notmuch-show-stash-mlarchive-link-and-go'.
(notmuch-show-stash-mlarchive-link):
New function, stashes a URI pointing to the current message at one
of the MLAs configured in `notmuch-show-stash-mlarchive-link-alist'.
Prompts user with `completing-read' if not provided with an MLA key.
(notmuch-show-stash-mlarchive-link-and-go):
New function, uses `notmuch-show-stash-mlarchive-link' to
stash a URI, and then visits it using the browser configured
in `browse-url-browser-function'.
Based on original work [1] by David Edmondson <dme@dme.org>.
[1] id:"1327397873-20596-1-git-send-email-dme@dme.org"
* emacs/notmuch-show.el
(notmuch-show-get-message-id):
Add optional arg BARE. When non-nil, return a Message-Id without
quotes and prefix, thus obviating the need to strip them off again
in various places.
(notmuch-show-stash-message-id-stripped):
Update wrt changes in `notmuch-show-get-message-id'.
Replace text/x-vcalendar with text/calendar, while maintaining support
and backwards compatibility for text/x-vcalendar.
Code by David Edmondson <dme@dme.org>
When notmuch-search-line-faces is used to set background color in search
results, the highlight of the current line is not always displayed
correctly. This patch fixes that by increasing the priority property of
the highlight overlay.
The notmuch-show view refresh function (`notmuch-show-refresh-view',
bound to "=") accepts an optional RETAIN-STATE argument. The patch
allows to set this argument interactively by using "C-u =".
Recent changes in notmuch-show tagging introduced some code
duplication. The patch cleanups and simplifies
`notmuch-show-archive-thread' function by using
`notmuch-show-tag-all', no longer used function are removed. After
the change, `notmuch-show-archive-thread' function becomes symmetric
with `notmuch-show-archive-message'.
A side effect of these changes is that `notmuch-show-archive-thread'
no longer calls "notmuch tag" for each message in the thread.
With an argument, record and reply the state of the buffer during
`notmuch-show-refresh-view'.
In this context, "state" is defined as:
- the open/closed state of each message,
- the current message.
Traditional use of refresh with the = key does not retain the
state. The recently introduced toggle commands ($, !, < and >) do
retain the state.
Very deeply indented content is sometimes difficult to
read (particular for something like patches). Allow the indentation of
the content to be toggled with '<'.
Indentation of the header lines is not affected, so it remains
possible to see the structure of the thread.
The current behaviour (all messages shown, non-matching collapsed)
is retained as the default. Type '!' to switch to showing only
the matching messages - non-matching messages are not available.
'!' will switch back to showing everything.
Re-work the existing crypto switch toggle to be based on a persistant
buffer-local variable.
To allow this, modify `notmuch-show-refresh-view' to erase and re-draw
in the current buffer rather than killing the current buffer and
creating a new one. (This will also allow more per-buffer behaviour in
future patches.)
Add a binding ('$') to toggle crypto processing of the current buffer
and remove the prefix argument approach that achieves a similar
result.
When showing the user some details of gnupg output, ensure that those
details are shown at the end of the gnupg status buffer
("*notmuch-crypto-gpg-out*"), otherwise it can end up mixed up with
earlier output.
Add default value to notmuch-search-line-faces to show "unread"
messages in bold, and "flagged" messages in blue, to have some visual
indication of important messages in search results. This should be
helpful for new users.
"unread" tag is quite obvious, and handled specially both in the lib
and emacs ui. "flagged" is synced to maildir F flag in the lib. If one
syncs the maildir to IMAP, this also translates to corresponding IMAP
flag. (This is "starred" in GMail and Android.)
Signed-off-by: Jani Nikula <jani@nikula.org>
Modify the show view key bindings as follows to make them more
consistent:
'a' = Archive current message, then move to next message, or show next
thread from search if at the last message in thread.
'A' = Archive each message in thread, then show next thread from
search.
'x' = Archive current message, then move to next message, or exit back
to search results if at the last message in thread.
'X' = Archive each message in thread, then exit back to search
results.
The changes make the key bindings more consistent in two ways:
1) 'a'/'A' both advance to the next thread like 'a' used to.
2) 'x' operates on messages and 'X' on threads like 'a'/'A'.
This makes the argument names more consistent and clear. The
following functions changed: `notmuch-tag',
`notmuch-search-tag-thread', `notmuch-search-tag-region' and
`notmuch-search-tag-all'.
Since `notmuch-tag' is a non-interactive function and hence is meant
to be invoked programmatically, it should accept zero tags. Also, the
tagging operations (bound to "*", "+", "-") would accept empty input
without an error.
The tag syntax check in `notmuch-tag' function was too strict and did
not allow nmbug tags with "::". Since the check is done for all
tagging operations in Emacs UI, this basically means that no nmbug
tags can be changed. The patch relaxes the tag syntax check to allow
any tag names that do not include whitespace characters.
Some tag-related operations accept a single tag without prefix
(`notmuch-select-tag-with-completion'), others accept multiple tags
prefixed with '+' or '-' (`notmuch-read-tag-changes'). Before the
change, both functions used a single default minibuffer history. This
is inconvenient because you have to skip options with incompatible
format when going through the history. The patch adds separate
history lists for the two functions. Note that functions that accept
the same input format (e.g. "+", "-", "*") share the history list as
before.
The patch adds `notmuch-show-tag-all' function bound to "*" in
notmuch-show view. The function is similar to the
`notmuch-search-tag-all' function for the notmuch-search view: it
changes tags for all messages in the current thread.
Before the change, "+" and "-" tagging operations in notmuch-show view
accepted only a single tag. The patch makes them use the recently
added `notmuch-read-tag-changes' function, which allows to enter
multiple tags with "+" and "-" prefixes. So after the change, "+" and
"-" bindings in notmuch-show view allow to both add and remove
multiple tags. The only difference between "+" and "-" is the
minibuffer initial input ("+" and "-" respectively).
Before the change, "+" and "-" tagging operations in notmuch-search
view accepted only a single tag. The patch makes them use the
recently added `notmuch-read-tag-changes' function (renamed
`notmuch-select-tags-with-completion'), which allows to enter multiple
tags with "+" and "-" prefixes. So after the change, "+" and "-"
bindings in notmuch-search view allow to both add and remove multiple
tags. The only difference between "+" and "-" is the minibuffer
initial input ("+" and "-" respectively).
Before the change, tag format validation was done in
`notmuch-search-operate-all' function only. The patch moves it down
to `notmuch-tag', so that all users of that function get input
validation.
As Aaron explains in id:"m2vco72tf3.fsf@wal122.wireless-pennnet.upenn.edu"
Using point-max would include the signature in the quoting as well.
It would probably be fairly odd to want to put an MML tag in one’s
signature, but that doesn’t mean that we should break that usage.
We had to use point-max in the 0.11.1 bug-fix release, because the
mark functionality was added post 0.11.
`Notmuch-wash-region-to-button' is the function that creates hidden
regions with buttons for signatures, citations and original messages.
Before the change, it did not work correctly if the to-be-hidden
region started at the beginning of a message: the visibility toggle
button was hidden as well. The patch fixes this. There are two parts
in the fix:
* Use `insert-before-markers' instead of `insert' for creating the
button, so that it does not get added to the hidden overlay.
* Stop using PREFIX argument for adding a newline before the button.
The newline should not be added before a button at the beginning of
buffer.
The corresponding test is fixed now.
The blank line doesn't really change position, but is now considered
to be part of the body rather than part of the headers. This means
that it is visible when the body is visible rather than when the
headers are visible.
Emacs message-mode uses certain text strings to indicate how to attach
files to outgoing mail. If these are present in the text of an email,
and a user is tricked into replying to the message, the user’s files
could be exposed.
Edited-by: Pieter Praet <pieter@praet.org>: Rebased to release branch.
This changes the default key bindings for the 'a' key in notmuch-show
mode. Instead of archiving the entire thread, it now just archives
the current message, and then advance to the next open message
(archive-message-then-next). 'A' is now bound to the previous
archive-thread-then-next function.
This will allow for keybindings that achieve a smoother message
processing flow by reducing the number of key presses needed for most
common operations.
This adds two new message archiving functions that parallel the thread
archiving functions: notmuch-show-archive-message{,-then-next}. The
former also takes a prefix argument to unarchive the message (ie. put
back in inbox).
This function is now just for archiving the current thread. A new
function is created to archive-then-next. The 'a' key binding is
updated accordingly.
This will allow people to bind to the simple thread archiving function
without the extra navigation. The archive-thread function now also
takes a prefix to unarchive the current thread (ie. put the whole
thread back in the inbox).
Break up notmuch-show-archive-thread-internal into two new functions:
notmuch-show-tag-thread-internal: applies a tag to all messages in
thread. If option remove flag is t, tags will be removed instead of
added.
notmuch-show-next-thread: moves to the next thread in the search
result. If given a prefix, will show the next result, otherwise will
just move to it in the search view.
Two new interactive functions, notmuch-show-{add,remove}-tag-thread,
are also added. Together, these provide a better suit of thread
tagging and navigation tools.
The higher level thread archiving functions are modified to use these
new function.
`mail-header-parse-address' expects un-decoded mailbox parts, which is
not what we have at this point. Replace it with simple string
deconstruction.
Mark the corresponding test as no longer broken.
Minor whitespace cleanup.
The `mm-inlinable-p' function works better if it has access to the
data of the relevant part, so load that content before calling it.
Don't load the content for parts that the user has indicated no desire
to inline.
This fixes the display of attached image/jpeg parts, for example.
There are two ways to do search in Emacs UI: search widget in
notmuch-hello buffer and `notmuch-search' function bound to "s".
Before the change, these search mechanisms used different history
lists. The patch makes notmuch-hello search use the same history list
as `notmuch-search' function.
Before the change, "s" in notmuch-hello buffer would jump to the
search box. The patch changes the binding to `notmuch-search' which
is consistent with all other notmuch buffers.
Define a keymap for attachment buttons to allow multiple actions.
Define 3 possible actions:
save attachment: exactly as currently,
view attachment: uses mailcap entry,
view attachment with user chosen program
Keymap on a button is: s for save, v for view and o for view with
other program. Default (i.e. enter or mouse button) is save but this
is configurable in notmuch customize.
One implementation detail: the view attachment function forces all
attachments to be "displayed" using mailcap even if emacs could
display them itself. Thus, for example, text/html appears in a browser
and text/plain asks whether to save (on a standard debian setup)
This makes `show-trailing-whitespace' happy, i.e. it does not mark the
whole search box line as trailing spaces.
Since the dot is invisible, this change makes no visible difference
for `notmuch-hello'.
Edited-by: Pieter Praet <pieter@praet.org> to fix the tests.
'message contains options relevant to 'notmuch-send, not the other way around.
Thanks to Austin for suggesting `custom-add-to-group'.
id:"20120118184408.GD16740@mit.edu"
Add various functions to print notmuch messages and tie them together
with a simple frontend.
Add a binding ('#') in `notmuch-show-mode' to print the current
message.
one trailing space removed by db.
Enable the truncation of lines in `notmuch-show-mode' to avoid visual
noise caused by the wrapping of the header lines.
Don't enable `visual-line-mode' because it disables line truncation.
The benefits of `visual-line-mode' were that it wrapped long lines
in received messages. With `notmuch-wash-wrap-long-lines' now default
behaviour, this is no longer required.
To allow for expansion whilst keeping everything tidy and organized,
move all defcustom/defface variables to the following subgroups,
defined in notmuch-lib.el:
- Hello
- Search
- Show
- Send
- Crypto
- Hooks
- External Commands
- Appearance
As an added benefit, defcustom keyword args are now consistently
ordered as they appear @ defcustom's docstring (OCD much?).
Proper defgroup docstrings and various other improvements
by courtesy of Austin Clements.
This reverts commit 4b256ff557.
According to id:"87aa5nlwwg.fsf@praet.org" and followup messages, the
assumptions of the patch seem not to hold in emacs 23.
As suggested by j4ni in #notmuch, rename
`notmuch-jump-to-recent-buffer' as `notmuch-cycle-notmuch-buffers' and
have it behave accordingly.
Consider `message-mode' buffers to be of interest.
The tags were coloured using text properties. Unfortunately that text
(the header line) also has an overlay, which overrides the text
properties. There's not point in applying text properties that will
never be seen.
Provide reply to sender counterparts to the search and show reply
functions. Add key binding 'R' to reply to sender, while keeping 'r' as
reply to all, both in search and show views.
Signed-off-by: Jani Nikula <jani@nikula.org>
Inserting spaces to pad out columns is good, except when the padding
makes the line wider than the window. This looks particularly bad on a
tty where there is no fringe.
Hence, avoid padding the last column on each row.
`notmuch-hello-mode' inherits the keymap for widgets, which confused
`notmuch-substitute-command-keys'. Fix the confusion.
Simplify `notmuch-substitute-command-keys' a little to make it easier
to read.
With the default configuration ('space' moves through the messages
matching the search and back to the results index at the end) it's
unnecessary to signal an error when the last message has been read, as
this is the common case.
Moreover, it's very annoying when `debug-on-error' is t.
Users are missing out on various functions which usefully improve the
display of text/plain message parts because they are not enabled by
default. Enable a useful set.
`notmuch-wash-convert-inline-patch-to-part' is _not_ enabled by
default as it is based on a heuristic.
Use the mail subject line for creating a descriptive filename for the wash
generated inline patch fake parts. The names are similar to the ones
created by 'git format-patch'.
If the user has notmuch-wash-convert-inline-patch-to-part hook enabled in
notmuch-show-insert-text/plain-hook, this will change the old default
filename of "inline patch" in fake parts:
[ inline patch: inline patch (as text/x-diff) ]
into, for example:
[ 0002-emacs-create-patch-filename-from-subject-for-inline.patch: inline patch (as text/x-diff) ]
which is typically the same filename the sender had if he was using 'git
format-patch' and 'git send-email'.
Signed-off-by: Jani Nikula <jani@nikula.org>
Add wash generated inline patch fake parts through a special
"inline-patch-fake-part" handler to distinguish them from real MIME
parts. The fake parts are described as "inline patch (as text/x-diff)".
Signed-off-by: Jani Nikula <jani@nikula.org>
Examples in documentation for `notmuch-search-line-faces' had an extra
quote, e.g.:
'(\"unread\" . '(:foreground \"green\"))
Which resulted in values like:
(\"unread\" quote (:foreground \"green\"))
And tons of "Invalid face reference: quote" errors in the messages
buffer.
Since message-ids necessarily match just a single message, there's no
reason to do a search for the id before viewing the actual message;
the search just becomes an extra screen to click through. Clicking on
an id: links now just jumps straight to the message itself.
Text properties change between characters; prev-s-c-property-change
returns the position after the change. Thus, it is still inside the
invisible region.
Notmuch-hello stores a list of recent searches. Before the change, if
a search from this list is repeated, the recent search list is not
changed. The patch makes repeated recent searches move to the head of
the list. I.e. the last search is always on top of the recent search
list, which is what one would expect from a history list.
This had been discussed and decided on IRC.
Rationale:
Therefore the space is recommended in the SI/ISO 31-0 standard, and the
International Bureau of Weights and Measures states that "for numbers with
many digits the digits may be divided into groups of three by a thin space, in
order to facilitate reading. Neither dots nor commas are inserted in the
spaces between groups of three".
(http://en.wikipedia.org/wiki/Decimal_separator#Digit_grouping)
If the address matching function generates no matches, don't prompt
the user to choose between them (!). Instead, generate a message to
report that there were no matches.
The :options keyword is not meaningful for function type. Also, it was not
possible to enter nil value, contrary to the notmuch-mua-user-agent
defcustom documentation. Specify the alternatives using choice type, taking
nil into account.
Signed-off-by: Jani Nikula <jani@nikula.org>
It was not possible to define custom filters or filter functions because
the types were const. Remove const to allow editing.
Signed-off-by: Jani Nikula <jani@nikula.org>
From a Carl Worth idea: add a function which will select the most
recently used notmuch buffer (search, show or hello). If no recent
buffer is found, run `notmuch'.
It is expected that the user will global bind this command to a key
sequence.
`notmuch-hello' should call `notmuch-hello-mode' function only when
run for the first time. But before the change, `notmuch-hello' used
`kill-all-local-variables' to remove editable widgets fields. This
caused the major mode to be reset, and `notmuch-hello-mode' to be
called every time.
The patch manually deletes all editable widget fields and removes
`kill-all-local-variables' call.
From the emacs changelog:
** `compose-mail' now accepts an optional 8th arg, RETURN-ACTION, and
passes it to the mail user agent function. This argument specifies an
action for returning to the caller after finishing with the mail.
This is currently used by Rmail to delete a mail window.
Under Emacs 24, notmuch breaks when this argument is passed to it by a
function in another part of Emacs. One example of a functon that does
this is report-emacs-bug -- so notmuch users cannot file emacs bug
reports!
This patch also adds a &rest argument to the arg-list of this function,
to future-proof against such changes. This is adapted from the approach
taken by message-mail, a similar function built into emacs.
This patch was originally submitted by richardmurri@gmail.com on Aug. 1:
id:"877h6x6oor.fsf@veracitynetworks.com"
Commit cb841878 introduced new parts handlers for crypto parts, but also
hardcoded values for their headers face. This replaces these hardcoded values
with a customizable face.
Support nil value for notmuch-poll-script to run "notmuch new" instead of
an external script, and make this the new default. "notmuch new" is run
using the configured notmuch-command.
This allows taking better advantage of the "notmuch new" hooks from emacs
without intermediate scripts.
Signed-off-by: Jani Nikula <jani@nikula.org>
Before the change, there was a workaround to avoid notmuch show calls
for parts with application/* Content-Type. But non-inlinable parts
are not limited to this Content-Type (e.g. mp3 files have audio/mpeg
Content-Type and are not inlinable). For such parts
`notmuch-show-insert-part-*/*' handler is called which unconditionally
fetches contents for all parts.
The patch moves content fetching from `notmuch-show-insert-part-*/*'
to `notmuch-show-mm-display-part-inline' function after MIME inlinable
checks are done to avoid useless notmuch show calls. The
application/* hack is no longer needed and removed.
Add optional props argument to `notmuch-show-get-header'. Use it to
get headers in `notmuch-show-insert-part-multipart/signed' and
`notmuch-show-insert-part-multipart/encrypted'.
The process-lines function calls the notmuch binary. The location of
the binary may have been customized by the user, so it is better to
use the customized location rather than allowing the process-lines
function to search the user's PATH for the binary.
Till now Emacs UI indents messages according to their respecive
depth of neting in the thread. The actual width of indentation
per level is hardcoded to `1' space.
This patch makes message indentation customisable by introducing
a variable `notmuch-indent-messages-width' which defaults to `1',
which is the same as before. Felix could set this variable to
`0' in order to disable indentation, I tested it with a value of
`4' for a clearer separation of messages in a thread.
There's no reason to record undo information for read-only,
programmatically-constructed buffers. The undo list just chews up
memory keeping track of our calls to insert.
Add new customization option notmuch-saved-search-sort-function to sort
saved searches in user-defined order. Provide a sort function to sort the
saved searches in alphabetical order. Setting the search function to nil
causes the saved searches not to be sorted, as before. This also remains
the default. The function only affects display of the saved searches, not
the order in which they are stored by custom.
Signed-off-by: Jani Nikula <jani@nikula.org>
This patch breaks out much of the functionality of
notmuch-show-advance-and-archive into a new function:
notmuch-show-advance. This new function does all the advancing
through a show buffer that notmuch-show-advance-and-archive did,
without all the invasive thread archiving. The return value of
notmuch-show-advance is nil if the bottom of the thread is not
reached, and t if it is.
notmuch-show-advance-and-archive is modified to just call
notmuch-show-advance, and then call notmuch-show-archive-thread if the
return value is true. In this way the previous functionality of
notmuch-show-advance-and-archive is preserved.
This provides a way for people to rebind the space bar to a more sane
function if they don't like the default behavior.
The main reason to introduce this new unexposed function is to allow
the buffer redisplay crypto switch to behaving in a more expected way.
The prefix to notmuch-show-redisplay buffer now switches the crypto
processing of the current show buffer, as opposed to switching the
logic of the notmuch-crypto-process-mime customization variable. This
behavior is more intuitive.
Add function `notmuch-show-stash-message-id-stripped'
which stashes a Message-ID after ripping off the prefix and quotes,
add bind it to "I" key in `notmuch-show-stash-map'.
Simplifying `notmuch-show-get-message-id' instead might seem better,
but that would require concat'ing in 9 places instead of 1.
Signed-off-by: Pieter Praet <pieter@praet.org>
It is very convenient when C-e (bound to `widget-end-of-line') ignores
trailing spaces inside the search widget. But it only does so if a
widget is not followed by a newline (that is why it works in the saved
search widgets). The patch just adds an invisible space after the
search widget to get the desirable behavior of `widget-end-of-line'.
The extra space is also added to expected results of emacs tests.
Buffer redisplay requires traversing the buffer's invisibility spec
for every part of the display that has an 'invisible text or overlay
property. Previously, the search buffer's invisibility spec list
contained roughly one entry for each search result. As a result,
redisplay took O(NM) time where N is the number of visible lines and M
is the total number of results. On a slow computer, this is enough to
make even buffer motion noticeably slow. Worse, during a search
operation, redisplay is triggered for each search result (even if
there are no visible buffer changes), so search was quadratic
(O(NM^2)) in the number of search results.
This change switches to using a single element buffer invisibility
spec. To un-hide authors, instead of removing an entry from the
invisibility spec, it simply removes the invisibility overlay from
those authors.
I tested using a query with 6633 results on a 9 year old machine.
Before this patch, Emacs took 70 seconds to fill the search buffer;
toward the end of the search, Emacs consumed 10-20x as much CPU as
notmuch; and moving point in the buffer took about a second. With
this patch, the same query takes 40 seconds, Emacs consumes ~3x the
CPU of notmuch by the end, and there's no noticeable lag to moving
point. (There's still some source of non-linearity, because Emacs and
notmuch consume roughly the same amount of CPU early in the search.)
Emacs 23.2 queries by default about killing existing processes. This
is annoying when one wants to interrupt long search with 'q' key.
Disable this behavior for notmuch.
`point-invisible-p' does not work correctly when `invisible'
property is a list. There are standard `invisible-p' and related
functions that should be used instead.
Use `previous-single-char-property-change' instead of going
through each character by hand and testing it's visibility. This
fixes `notmuch-show-advance-and-archive' to work for the last
message in thread with hidden signature.
This function, like the equivalent for notmuch-search, just refreshes
the current show view. Like in notmuch-search, this new function is
bound to "=". If a prefix is given then the redisplay happens with the
crypto-switch set, which displays the thread with the opposite logic
of whatever is set in the notmuch-crypto-process-mime customization
variable.
This adds two callback functions to the sigstatus button. If the sig
status is "good", then clicking the button displays the output of "gpg
--list-keys" on the key fingerprint. If the sigstatus is "bad", then
clicking the button will retrieve the key from the keyserver, and
redisplay the current buffer.
Thanks to David Bremner <bremner@unb.ca> for help with this.
The insert-part-message/rfc822 function is overhauled to properly
processes the new formatting of message/rfc822 parts. The json output
for message parts now includes "headers" and "body" fields, which are
now parsed and output appropriately.
Emacs lisp function 'member' takes element and list as an
argument. I.e. the second argument is list, not symbol
referencing the list.
On emacs 23.x the member call always returned nil (thus buggy),
on emacs 22.x the call failed, making it unusable.
The feature to show subject changes in the collapsed thread view was
originally added (8ab433607) with an option
(notmuch-show-always-show-subject) to display the subject
for all messages, even when there was no change.
The subsequent commit (4f04d273) changed the sense of the test (or to
and) and the name of the controlling variable
(notmuch-show-elide-same-subject).
But this commit is broken in a few ways:
1. The original definition of notmuch-show-always-show-subject was
left around
But the variable isn't actually used in the code at all, so it
just adds clutter and confusion to the customization interface.
2. The name and description of the controlling variable doesn't
match the implementation
The name suggests that setting the variable to t will cause
repeated subjects to be elided, (suggesting that when it is nil
all subjects will be shown).
However, when the variable is nil, no subjects are shown. So a
correct name for the variable in this sense would be
notmuch-show-subject-changes.
Showing subject changes is a useful feature, and should be on by
default. (We don't want to bury generally useful features behind
customizations that users have to find).
Rather than fixing the name of the variable and changing its default
value, here we remove the condition entirely, such that the feature is
enabled unconditionally.
So both the currently-used variable and the stale definition of the
formerly-used are removed.
Also, the one relevant test-suite result is updated, (showing the
intial subject of a collapsed thread, and no subject display for later
messages that do not change the subject).
We call these "global_deps" for a reason, after all!
Without this, emacs compilation would proceed even if the configure script
failed, (such as for a missing dependency). That's undesirable as it can
cause the helpful error messages from the configure failure to scroll away.
Various typo fixes in error messages within the source code.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just error messages.
Various typo fixes in documentation within the code that can be made
available to the user, (emacs function help strings, "notmuch help"
output, notmuch man page, etc.).
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
documentation and fixed fix of "comman" to "common" rather than
"command".
Various typo fixes in comments within the source code.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
source-code comments, (and fixed fix of "descriptios" to "descriptors"
rather than "descriptions").
Various typo fixes in comments within the Makefile and other build scripts.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just build files.
This error occurs when `notmuch-fcc-dirs' is set to a list. The error
was in the `notmuch-fcc-dirs' format check which was changed in an
incompatible way from 0.4 to 0.5.
The fix was extracted from a bigger patch series by David
Edmondson id:"1290682750-30283-2-git-send-email-dme@dme.org".
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
This is patch is a temporary work-around for a slight regression that
popped up in the part handling reorganization. Currently, text/plain
parts are always preferred, if present, over other non-text/plain
parts in multipart/alternative. However, this means that if there is
a blank text/plain part, no content will be displayed.
One way to get around this is to set the
"notmuch-show-all-multipart/alternative-parts" customization variable
to True ('t'), which will cause all parts to always be displayed.
Since we want to move forward with the next release, we're going to
set this variable true by default, to make sure that no content is
unretrievably hidden from the user. Once we come up with a better
solution for easy display of hidden parts we can set this back to a
default value of 'nil'.
Before the change, headers and message visibility functions took
extra care to correctly set `buffer-invisibility-spec'. This was
needed because headers overlay `invisible' property had only
headers' invisibility spec. So visibility of headers was
determined only by the headers invisibility spec. The patch sets
headers overlay `invisible' property a list with both the headers
and the message invisibility spec. This makes headers invisible
if either of them is added to the `buffer-invisibility-spec' and
allows to simplify the code.
Before the patch, message, headers and hidden citation overlays
had zero priority. All these overlay have `invisible' property.
Emacs documentation says that we should not make assumptions
about which overlay will prevail when they have the same priority
[1]. It happens to work as we need, but we should not rely on
undocumented behavior.
[1] http://www.gnu.org/s/emacs/manual/html_node/elisp/Overlay-Properties.html
Before the change, message and citation invisibility overlays
conflicted: if some citation is made visible and then the whole
message is hidden, that citation remained visible. This happened
because the citation's overlay has an invisible property which
takes priority over the message overlay. The message
invisibility spec does not affect citation visibility, it is
determined solely by the citation overlay invisibility spec.
Hence, if citation is made visible, it is not hidden by message
invisibility spec.
The patch changes citation overlay invisibility property to be a
list which contains both the citation and the message
invisibility specs. This makes the citation invisible if either
of them is added to the `buffer-invisibility-spec'. Note that
all citation visibility states are "restored" when the message
hidden and shown again.
Before the change, the `notmuch-show-insert-text/plain-hook' was
given only the `depth' argument. The patch adds another one -
the message. Currently, the new message argument is not used by
any on the hooks. But it will be used later to get access to
message invisibility specs when wash buttons are inserted.
The emacs bug is that isearch cannot search through invisible text
when the 'invisible' property is a list.
The patch adds `notmuch-isearch-range-invisible' function which
is the same as `isearch-range-invisible' but with fixed Emacs bug
#8721. Advice added for `isearch-range-invisible' which calls
`notmuch-isearch-range-invisible' instead of the original
`isearch-range-invisible' when in `notmuch-show-mode'.
This code treats top posted copies essentially like signatures, except
that it doesn't sanity check their length, since neither do their
senders.
New user-visible variables:
notmuch-wash-button-original-hidden-format
notmuch-wash-button-original-visible-format
Rebased-by: Carl Worth <cworth@cworth.org>
Mail-header-parse-address may fail for an invalid address.
Before the change, this would result in empty notmuch-show buffer
with an error message like: Scan error: "Unbalanced parentheses".
The patch wraps the function in condition-case and returns
unchanged address in case of error.
Most of the time, every entry in the list of identities has the same user name
part. It can then be filled in automatically, and the user can only be prompted
for the email address, which makes the interface much cleaner.
For message-fetch-field the buffer is expected to be narrowed to
just the header of the message. That is not the case when
notmuch-fcc-header-setup is run, hence a wrong header value may be
returned. E.g. when forwarding an
email, (message-fetch-field "From") returns the From header value
of the forwarded email.
Message-field-value is the same as message-fetch-field, only
narrows the buffer to the headers first.
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
(describe-face 'message-cited-text-face)
> message-cited-text-face is an alias for the face `message-cited-text'.
> This face is obsolete since 22.1; use `message-cited-text' instead.
Signed-off-by: Pieter Praet <pieter@praet.org>
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
jrollins modified this patch to conform to recent changes in the
crypto processing since this patch was originally sent in.
Write-region handles some file names specially, see Emacs Lisp
manual section 25.11 Making Certain File Names "Magic" [1]. This
is a nice feature for normal text editing, but it is not
desirable if we need to save raw file content (e.g. attachment).
In particular, this affects archives and may result in corrupted
attachments saved with notmuch-show-save-part (attachment button
click handler).
Turns out, smart GNUS folks encountered the same problem and
implemented write-region wrapper which inhibits some file name
handlers. In particular, this wrapper is used in mm-save-part,
which is why notmuch-save-attachments that uses it works fine
with archives.
The patch replaces write-region with mm-write-region in
notmuch-show-save-part. Also it removes coding-system-for-write
and require-final-newline setting in notmuch-show-save-part. The
former is set in mm-write-region. The latter seems to be
unneeded because mm-save-part does not use it.
[1] http://www.gnu.org/s/emacs/manual/html_node/elisp/Magic-File-Names.html
This is the best way to make the displayed output for
decrypted/verified messages clearer. The special sigstatus and
encstatus buttons are now displayed under the part header button. The
part header button is also tweaked to provide information to user
about how to proces crypto.
We probably shouldn't have been doing this anyway, but we do it here
specifically because we don't want the content of the
application/pgp-encrypted parts to be displayed and cluttering the
message show.
A new emacs configuration variable "notmuch-crypto-process-mime"
controls the processing of PGP/MIME signatures and encrypted parts.
When this is set true, notmuch-query will use the notmuch show
--decrypt flag to decrypt encrypted messages and/or calculate the
sigstatus of signed messages. If sigstatus is available, notmuch-show
will place a specially color-coded header at the begining of the
signed message.
Also included is the ability to switch decryption/verification on/off
on the fly, which is bound to M-RET in notmuch-search-mode.
This patch adds a customization variable that controls what queries
are used to construct the all-tags section in notmuch-hello. It allows
the user to specify a function to construct the query given a tag or
a string that is used as a filter for each tag.
It also adds a variable to hide various tags from the all-tags section.
Signed-off-by: Daniel Schoepe <daniel.schoepe@googlemail.com>
This adds functions and variables needed for this feature to be implemented.
Once it's done, the user will be able to use a prefix argument (e.g. pressing
C-u m instead of m) and be able to select a From address.
By default the list of names/addresses to be used during completion will be
automatically generated by the settings in the notmuch configuration file. The
user can customize the notmuch-identities variable to provide an alternate list.
This is based on a previous patch by Carl Worth
(id:"87wrhfvk6a.fsf@yoom.home.cworth.org" and follow-ups).
Before the change, save-excursion was used to save the point. But the
marker saved by save-excursion was inside a region that was deleted,
so that approach is unreliable, (leading to point jumping to a new
position past the button). This patch instead saves point in an
integer variable, and when restoring, carefully avoids moving point
past the button, (in case the new button label is shorter than the old
button label).
Before the change, citation and signature wash buttons used the
same label in both visible and hidden states. Sometimes it is
very convenient when you can determine if the text is hidden or
shown without reading the context and/or clicking the button.
The patch makes it easy to see if the text is shown or hidden by
explicitly saying what the button does (shows or hides the text).
This patch adds hooks that are run before/after messages are tagged
From the emacs interface. In order to implement this and to avoid
having hooks parse all the arguments to the notmuch binary again, I
created a `notmuch-tag' function that other modules should use instead
of running (notmuch-call-notmuch-process "tag" ...) directly.
The command-line interface for extracting a single part from a message
recently changed from:
notmuch part --part=X
to:
notmuch show --format=raw --part=X
Remove double quotes and flatten "foo@bar.com <foo@bar.com>" to
"foo@bar.com".
Edited-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net> (clean up
expected output for emacs tests).
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
This controls the appearance of collapsed messages in notmuch-show
mode, avoiding redundancy for repeated subject).
Remove `notmuch-show-always-show-subject'.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Typically used to allow a `text/html' renderer access to images which
are sent along with the HTML.
This is not enabled by default, instead the user must execute
`notmuch-show-setup-w3m' for it to take effect.
Edited-by: Carl Worth <cworth@cworth.org> Add documentation string for
notmuch-show-setup-23m and clean up warning about reference/assignment
of free variable.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Add a variable `notmuch-show-all-multipart/alternative-parts' that
allows the user to indicate that all candidate sub-parts of a
multipart/alternative part should be shown rather than just the
preferred part. The default is `nil', showing only the preferred part.
This is mostly a debugging aid.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Use code from icalendar.el to convert text/x-vcalendar parts to
something suitable for use with the Emacs diary.
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
Previously, notmuch show flattened all output, losing information
about the nesting of the MIME hierarchy. Now, the output is properly
nested, (both in the --format=text and --format=json output), so that
clients can analyze the original MIME structure.
Internally, this required splitting the final closing delimiter out of
the various show_part functions and putting it into a new
show_part_end function instead. Also, the show_part function now
accepts a new "first" argument that is set not only for the first MIME
part of a message, but also for each first MIME part within a series
of multipart parts. This "first" argument controls the omission of a
preceding comma when printing a part (for json).
Many thanks to David Edmondson <dme@dme.org> for originally
identifying the lack of nesting in the json output and submitting an
early implementation of this feature. Thanks as well to Jameson Graef
Rollins <jrollins@finestructure.net> for carefully shepherding David's
patches through a remarkably long review process, patiently explaining
them, and providing a cleaned up series that led to this final
implementation. Jameson also provided the new emacs code here.
This avoids the emacs lisp compiler from emitting warnings on this
replacement code, (which warnings would be hard for us to eliminate
since we didn't write the code but copied it verbatim from emacs 23).
With the previous commit, unexpected output before or between search results
would be displayed. However, trailing junk from the "notmuch search" output
would still be silently swallowed.
The most common case for an error message from "notmuch search" would be
an invalid command-line, and in that case, there would be no search results
and the trailing error message would get swallowed.
We fix the process sentinel to check for leftover data and add it to the
final buffer. We also add a test case to ensure this works.
This fixes the recently-added emacs-large-search-buffer test. This is
as simple as saving any trailing input and then pre-prepending it on
the next call.
MAny thanks to Thomas Schwinge <thomas@schwinge.name> for tracking
down this problem and contributing a preliminary version of this fix.
Rather than silently swallowing unexpected output, the emacs interface will now
display it. This will allow error messages to actually arrive at the emacs
interface (though not in an especially pretty way). This also allows for easier
investigation of the inadvertent swallowing of search results that span page
boundaries (as demonstrated by the recent added emacs-large-search-buffer test).
The page-boundary bug has been present since a commit from 2009-11-24:
93af7b5745
Many thanks to Thomas Schwinge for tracking that bug down and
contributing the test for it.
Such as:
mkdir build
cd build
../configure
make
This is implemented by having the configure script set a srcdir
variable in Makefile.config, and then sprinkling $(srcdir) into
various make rules. We also use vpath directives to convince GNU make
to find the source files from the original source directory.
The call-process to notmuch in notmuch-query.el was previously sending
stderr into the output buffer. This means that if there is any stderr
the JSON parsing breaks. Unfortunately call-process does not support
sending stderr to a separate buffer or to the minibuffer [0], but it
does support sending it to /dev/null. So we do that here instead.
[0] a bug was filed against emacs (#7842)
Previously, the user didn't know whether the pipe command succeeded or
not. It was only possible to find it out by manually inspecting
the work done (or not done) by the command or by manually switching to
*notmuch-pipe* buffer and determine it from command output. For this
the user had to first find the text corresponding to the last run of
pipe command as the buffer accumulated the output from all pipe commands.
This patch changes the following. The *notmuch-pipe* buffer is erased
before every pipe command so it contains only the output from the last
command. Additionally, when the command failed, the *notmuch-pipe* buffer
is shown and an error message is displayed.
with the output of pipe command.
add --bashcompletiondir and --zshcompletiondir (like --emacslispdir) to choose
installation dir for bash/zsh completion files
Make some features optional:
--without-emacs / --with-emacs=no do not install lisp file
--without-bash-completion / --with-bash-completion=no do not install bash
files
--without-zsh-completion / --with-zsh-completion=no do not install zsh files
By default, everything is enabled. You can reenable something with
--with-feature=yes
