At least in emacs24, this removes the "site-lisp" directories from the
load path in addition to enforcing --no-site-lisp --no-init-file.
This works around a slightly mysterious bug on Debian that causes
test-lib.el not to load when there is cl-lib.el(c) in some site-lisp
directory. It should be harmless in general since we really don't
want to load any files from addon packages to emacs.
It turns out to be inconvenient to delete the downloaded datafiles with
distclean, so I propose a new target which does that instead.
The closest conventional target is 'maintainer-clean'; the difference
here is that having the original source tarball is not enough to
reconstruct these files.
The linking to talloc is hard-coded in the testing Makefile. This patch
causes the linking to talloc to be done according to how TALLOC_LDFLAGS
was configured.
Signed-off-by: Charles Celerier <cceleri@cs.stanford.edu>
- The old test was quite impossible to debug; the new one shows the difference
between the two directories, if any.
- "repository" doesn't make sense for out of tree builds. Or tarball
builds, for that matter.
All we do here is calculate the backup filename, and call the existing
dump routine.
Also take the opportunity to add a message about being safe to
interrupt.
The main goal is to support gzipped output for future internal
calls (e.g. from notmuch-new) to notmuch_database_dump.
The additional dependency is not very heavy since xapian already pulls
in zlib.
We want the dump to be "atomic", in the sense that after running the
dump file is either present and complete, or not present. This avoids
certain classes of mishaps involving overwriting a good backup with a
bad or partial one.
We've supported mbox files containing a single message for historical
reasons, but the support has been deprecated, with a warning message
while indexing, since Notmuch 0.15. Finally drop the support, and
consider all mbox files non-email.
Previously, the term escaper used a blacklist of characters that
needed escaping. This blacklist turned out to be somewhat incomplete;
for example, it did not contain non-whitespace ASCII control
characters or Unicode "fancy quotes", both of which do require the
term to be escaped.
Switch to a whitelist of characters that are definitely safe to leave
unquoted. This fixes the broken test introduced by the previous
patch.
The current term escaper gets most of these right, but fails to escape
things containing Unicode "fancy quotes" or things containing
non-whitespace control characters.
I still have one machine with old enough Xapian to not have compaction
support. Make the tests check for unsupported compact operation when
compact is not available.
This allows (and requires) the original-tags to be passed along with
the current-tags to be passed to notmuch-tag-format-tags. This allows
the tag formatting to show added and deleted tags.By default a removed
tag is displayed with strike-through in red (if strike-through is not
available, eg on a terminal, inverse video is used instead) and an
added tag is displayed underlined in green.
If the caller does not wish to use the new feature it can pass
current-tags for both arguments and, at this point, we do exactly that
in the three callers of this function.
Note, we cannot tidily allow original-tags to be optional because we would
need to distinguish nil meaning "we are not specifying original-tags"
from nil meaning there were no original-tags (an empty list).
We use this in subsequent patches to make it clear when a message was
unread when you first loaded a show buffer (previously the unread tag
could be removed before a user realised that it had been unread).
The code adds into the existing tag formatting code. The user can
specify exactly how a tag should be displayed normally, when deleted,
or when added.
Since the formatting code matches regexps a user can match all deleted
tags with a ".*" in notmuch-tag-deleted-formats. For example setting
notmuch-tag-deleted-formats to '((".*" nil)) tells notmuch not to show
deleted tags at all.
All the variables are customizable; however, more complicated cases
like changing the face depending on the type of display will require
custom lisp.
Currently this overrides notmuch-tag-deleted-formats for the tests
setting it to '((".*" nil)) so that they get removed from the display
and, thus, all tests still pass.
It turns out there was a reason the old man pages were stored in a man
compatible hierarchy, namely so that we could run man on them before
installing.
Hardcode doc build location into test suite. This isn't ideal, but
let's unbreak the test suite for now.
The checksum file is used by the test infrastructure to verify the downloaded
test database is the one we had in mind. Note that this test is
rather strict, and the the checksum file needs to be recommitted when
the database is regenerated.
add a pattern .gitignore to ignore the actual databases
Test the upgrade from probabilistic to boolean folder: terms, and
addition of path: terms.
The test depends on the pre-built test corpus and database tarball and
checksum file being in place. If it's not, the test is skipped. The
mechanism to fetch the test database will be added later.
At the time of writing, a working test database and checksum file is
available at
http://notmuchmail.org/releases/test-databases/
It has been noted that some non-GNU environments make lack
sha256sum. We leave this portability issue for a followup patch.
In xapian terms, convert folder: prefix from probabilistic to boolean
prefix, matching the paths, relative from the maildir root, of the
message files, ignoring the maildir new and cur leaf directories.
folder:foo matches all message files in foo, foo/new, and foo/cur.
folder:foo/new does *not* match message files in foo/new.
folder:"" matches all message files in the top level maildir and its
new and cur subdirectories.
This change constitutes a database change: bump the database version
and add database upgrade support for folder: terms. The upgrade also
adds path: terms.
Finally, fix the folder search test for literal folder: search, as
some of the folder: matching capabilities are lost in the
probabilistic to boolean prefix change.
We will need this for improved folder search tests, but having some
folders should exercise our code paths better anyway.
Modify the relevant test accordingly to make it pass.
This reorganization triggers a bug in the test suite, namely that it
expects the output of --output=files to be in a certain order. So we
add the fix for that into the same commit.
This mainly involves sorting, although the case --duplicate=$n
requires more subtlety.
Sanitize tabs and newlines to spaces rather than question marks in
--output=summary --format=text output.
This will also hide any difference in unfolding a header that has been
folded with a tab. Our own header parser replaces tabs with spaces,
while gmime would retain the tab.
The printf builtin "%(fmt)T" specifier (which allows time values
to use strftime-like formatting) is introduced in bash 4.2.
Trying to execute this in pre-4.2 bash will fail -- and if this
happens execute the fallback piece of perl code to do the same thing.
The test names assigned to NOTMUCH_SKIP_TESTS variable can now be given
with or without the Tddd- prefix for tester convenience:
The test name without Tddd -prefix stays constant even when test filenames
are renumbered.
The test name with Tddd -prefix is printed out when tests run.
According the semantics of make, the expansion of $(dir) in recipes
uses dynamic scope, i.e. the value at the time the recipe is run. This
means if test/Makefile.local is not the last sub-makefile included,
all heck breaks loose.
Previously, we stripped the "Tnnn-" part from the test name when
printing its description at the beginning of each test. However, this
makes it difficult to find the source script for a test (e.g., when a
test fails). Put this prefix back.
Searching by Message-Id no longer works via the old mail-archive.com
API, though I have contacted them in hopes that they restore it to
prevent dead links. Anyway, the new API is cleaner.
Acked-by: Austin Clements <amdragon@MIT.EDU>
Script `notmuch-test` expects the results file have T\d\d\d- part
intact so the results files (and some test output files) are now
name as such.
Without this change `notmuch-test` will exit in case the test
script it was executing exited with nonzero value.
The T\d\d\d- part is dropped in new variable $this_test_bare which is
used in progress informational messages and when loading .el files in
emacs tests (whenever $this_test_bare.el exists).
If there is a syntax error in the emacs test library, it causes other
tests to hang or crash without a useful error message.
This test could be eliminated if the error reporting for emacs tests
was somehow improved.
All test scripts to be executed are now named as T\d\d\d-name.sh,
numers in increments of 10.
This eases adding new tests and developers to see which are test scripts
that are executed by test suite and in which order.
When naming test scripts in format 'T\d\d\d-name.sh' the list of
tests to run are created dynamically. This makes test
'Ensure that all available tests will be run by notmuch-test'
in test/basic obsolete.
Previously the tags on each line in tree view were separarted by ", "
not just " ". This is different from show and search views.
This patch removes this comma. This is a large patch as essentially
every line of each of the expected outputs in the tree tests needs
updating.
Apart from aesthetic reasons this simplifies the switch to
notmuch-tag-format-tags in the next patch.
In some environments (at least Hurd), process-attributes is
unimplimented and always returns nil. This ends up causing test
failures (see e.g. id:87a9ffofsc.fsf@zancas.localnet).
Historically and according to POSIX 1003.1-2001, a signal of 0 can be
used to check the validity of a pid. This seems less heinous than
parsing the output of ps(1).
This fixes a non-deterministic failure in "Ignore files and
directories specified in new.ignore (multiple occurrences)". The test
assumed that all directories would be scanned, even though nothing
updated the mtime of ${MAIL_DIR}. It *usually* worked nevertheless
because the tests run quickly enough that the directory mtime is
usually the same as the current time, so notmuch new does not update
the mtime in the database (because more changes could occur in the
same second). However, when it occasionally did update the mtime in
the database, the notmuch new call in this test would (correctly) skip
"pass 2" of scanning ${MAIL_DIR}, causing it to skip the following
expected lines:
(D) add_files_recursive, pass 2: explicitly ignoring ${MAIL_DIR}/.git
(D) add_files_recursive, pass 2: explicitly ignoring ${MAIL_DIR}/.ignored_hidden_file
(D) add_files_recursive, pass 2: explicitly ignoring ${MAIL_DIR}/ignored_file
This patch fixes this problem by touching ${MAIL_DIR} to ensure it
gets scanned and by rearranging the test to ensure the directories are
touched immediately before the main notmuch new call in the test.
There is an obscure bug in notmuch-hello that very occasionally causes
emacs_deliver_message to fail. Since it it doesn't serve any actual
purpose in the function we delete it, and leave tracking down the the
bug for another day.
Most of the tests previously using emacs_deliver_message do not use
the actual transmitted message, so we replace it with a simpler (and
presumably more reliable function) that only saves (and indexes) an
fcc copy of the message.
When NOTMUCH_TEST_QUIET environment variable is set to non-null value
messages when new test script starts and when test PASSes are disabled.
This eases picking the cases when tests FAIL (as those are still printed).
In preparation for quiet mode print empty line before writing the
test description. This is done now in function designed for it --
it will also be called when test fails.
test-lib.sh sometimes did equivalent of `basename "$0" .sh`, sometimes
skipping the basename part and sometimes .sh part. This worked as
we never had path components in $0 (more than ./) nor .sh ending.
Now the equivalent of `basename "$0" .sh` is done once and used
everywhere. In the future we may have .sh suffix in test names
-- removing those is a good idea.
The choice of decreasing timestamps is a hack which reduces the number
of existing tests which fail. This can be changed to increasing
if/when somebody wants update another 47 tests.
add a new function notmuch_date_sanitize for rfc822-ish things. Add
date sanitization to notmuch_show_sanitize_all and use it more places.
This is all in aid of a transition to unique timestamps on messages.
Eventually we want test messages to have distinct dates to avoid
reproducability problems. This sanitization will prevent some test
failures when that change is made.
Replace the use of a local function in maildir-sync with
notmuch_json_show_sanitize
This was causing test failures because version strings varied in
length between GNU/Linux and GNU/KFreeBSD. One can also imagine
different versions of gnupg causing the same failure.
When executed command line is written to *Notmuch errors* buffer,
shell-quote-argument will backslash-escape any char that is not in
"POSIX filename characters" (i.e. matching "[^-0-9a-zA-Z_./\n]").
Currently in two emacs tests shell has expanded $PWD as part of
emacs variable, which will later be fed to #'shell-quote-argument
and finally written to ERROR file. If $PWD contained non-POSIX
filename characters, data in ERROR file will not match $PWD when
later comparing in shell. Therefore, in these two particular cases
the escaped $PWD is replaced with YYY in ERROR file and expected
content is adjusted accordingly.
This fixes races in thread-local and global tagging in notmuch-search
(e.g., "+", "-", "a", "*", etc.). Previously, these would modify tags
of new messages that arrived after the search. Now they only operate
on the messages that were in the threads when the search was
performed. This prevents surprises like archiving messages that
arrived in a thread after the search results were shown.
This eliminates `notmuch-search-find-thread-id-region(-search)'
because these functions strongly encouraged racy usage.
This fixes the two broken tests added by the previous patch.
These tests check that both thread-local and global search tagging
operations are race-free. They are currently known-broken because
they aren't race-free.
These queries will match exactly the set of messages currently in the
thread, even if more messages later arrive. Two queries are provided:
one for matched messages and one for unmatched messages.
This can be used to fix race conditions with tagging threads from
search results. While tagging based on a thread: query can affect
messages that arrived after the search, tagging based on stable
queries affects only the messages the user was shown in the search UI.
Since we want clients to be able to depend on the presence of these
queries, this ushers in schema version 2.
(Unfortunately, it's difficult to first demonstrate this problem with
a known-broken test because modern Linux kernels have argument length
limits in the megabytes, which makes Emacs really slow!)
It was looking in completely the wrong place for the backup and the
(test) xapian database. Unfortunately test_begin_subtest hides the
relevant errors.
Currently notmuch-show looks at the prefix-arg directly via
current-prefix-arg. This changes it to use the interactive
specification.
One test (for elide-toggle functionality) set the prefix arg
directly. Update this test to set the new argument directly.
One test (reply to encrypted message in the crypto test) recently
started failing on some systems. The failure I saw were two extra
lines of the form
<87d2nbc5xg.fsf@host.i-did-not-set--mail-host-address--so-tickle-me>
The test pipes the output through
grep -v -e '^In-Reply-To:' -e '^References:'
which would normally these two ids but it does not, in this case,
because they are so long they get put on a separate line in the output.
To fix this we set mail-host-address for emacs deliver. example.com
seems a sensible address to use. This is short enough that we don't
get the line breaks above and the tests then all pass.
As explained by Jeffrey Stedfast, the author of GMime, quoted in [1]:
> Passing the GMIME_ENABLE_RFC2047_WORKAROUNDS flag to g_mime_init()
> *should* solve the decoding problem mentioned in the thread. This
> flag should be safe to pass into g_mime_init() without any bad side
> effects and my unit tests do test that code-path.
The thread being referred to is [2].
[1] id:87bo56viyo.fsf@nikula.org
[2] id:08cb1dcd-c5db-4e33-8b09-7730cb3d59a2@gmail.com
Some common broken RFC 2047 encodings that we currently let gmime
parse strictly. We could tell gmime to be forgiving in what it accepts
as RFC 2047 encoding, making these tests pass.
When 'xpg_echo' bash shell option is unset (usually the default)
echo builtin does not expand backslash-escape sequences by default
(i.e. '\n' is echoed as '\n' instead of newline). Not all bash
installations have this feature we depend on activated by default.
Note that the feature is bash (and GNU /bin/echo) specific. It is used
as it is convenient. If portability is needed (elsewhere) use printf(1)
(also often available as a shell builtin).
If any of the tests in our test system is not passing the execution
of the test suite completes with nonzero exit value.
It is better to rely on the exit value of the test system instead
of some arbitrary strings in test output (or use both).
notmuch_message_tags_to_maildir_flags() unconditionally moves messages from
maildir directory "new/" to maildir directory "cur/", which makes messages lose
their "new" status in the MUA. However some users want to keep this "new"
status after, for instance, an auto-tagging of new messages.
However, as Austin mentioned and according to the maildir specification,
messages living in "new/" are not allowed to have flags, even if mutt allows it
to happen. For this reason, this patch prevents moving messages from "new/" to
"cur/", only if no flags have to be changed. It's hopefully enough to satisfy
mutt (and maybe other MUAs showing the "new" status) users checking the "new"
status.
Changelog:
* v2: Fix bool type as well as NULL returned despite having no errors (Austin
Clements)
* v4: Tag the related test (contributed by Michal Sojka) as working
Signed-off-by: Louis Rilling <l.rilling@av7.net>
[Condition for keeping messages in new/ was extended to satisfy all
tests from the previous patch. -Michal Sojka]
[Added by David Bremner, to keep the tests passing at each commit]
update insert tests for new maildir synchronization rules
As of id:1355952747-27350-4-git-send-email-sojkam1@fel.cvut.cz
we are more conservative about moving messages from ./new to ./cur.
This updates the insert tests to match
As mentioned by Jani Nikula in id:87vcccp4y3.fsf@nikula.org, some cases
of maildir synchronization are not covered by our tests. Let's add the
missing tests.
Some MUA's like mutt show the difference between "new" emails living in maildir
directory new/, and "old" emails living in maildir directory cur/. However
notmuch tag unconditionally moves selected messages from new/ to cur/, even if
no maildir synchronized tag is changed.
While maildir specification forbids messages with tags living in new/, there is
no need to move messages to cur/ when no maildir synchronized tag is changed.
Thus notmuch can remain transparent with respect to other MUA's.
[ Edited commit log to better describe the intended changes, and tag the
test as broken until the actual changes are implemented -- Louis Rilling ]
Signed-off-by: Louis Rilling <l.rilling@av7.net>
[ Converted to use test_subtest_known_broken, David Bremner ]
RFC 2047 states that the encoding and charset in an encoded word are
case-insensitive, so force them to lower case in the reply test. This
fixes an issue caused by GMime versions (somewhere between 2.6.10 and
2.6.16), which changed the capitalization of the encoding.
Previously, reply's default text format used an odd mix of RFC 2045
MIME encoding for the reply template's body and some made-up RFC
2822-like UTF-8 format for the headers. The intent was to present the
headers to the user in a nice, un-encoded format, but this assumed
that whatever ultimately sent the email would RFC 2047-encode the
headers, while at the same time the body was already RFC 2045 encoded,
so it assumed that whatever sent the email would *not* re-encode the
body.
This can be fixed by either producing a fully decoded UTF-8 reply
template, or a fully encoded MIME-compliant RFC 2822 message. This
patch does the latter because it is
a) Well-defined by RFC 2822 and MIME (while any UTF-8 format would be
ad hoc).
b) Ready to be piped to sendmail. The point of the text format is to
be minimal, so a user should be able to pop up the template in
whatever editor they want, edit it, and push it to sendmail.
c) Consistent with frontend capabilities. If a frontend has the
smarts to RFC 2047 encode the headers before sending the mail, it
probably has the smarts to RFC 2047 decode them before presenting
the template to a user for editing.
Also, as far as I know, nothing automated consumes the reply text
format, so changing this should not cause serious problems. (And if
anything does still consume this format, it probably gets these
encoding issues wrong anyway.)
Previously, the References header code seemed to assume
notmuch_message_get_header would return NULL if the header was not
present, but it actually returns "". As a result of this, it was
inserting an unnecessary space when concatenating an empty or missing
original references header with the new reference.
This shows up in only two tests because the text reply format later
passes the whole reply template through g_mime_filter_headers, which
has the side effect of stripping out this extra space.
This switches `notmuch-mua-reply' and `notmuch-query-get-threads' to
the S-exp format. These were the last two uses of the JSON format in
the Emacs frontend.
While looked good on paper, its attempted use caused confusion, complexity,
and potential for information leak when passed through wrapper scripts.
For slimmer code and to lessen demand for maintenance/support the set of
commits which added top level --stderr= option is now reverted.
The find option syntax `-perm +111` is deprecated gnu find feature.
The replacement `( -perm -100 -o -perm -10 -o -perm 1 )` should also
work outside of the GNU domain.
In addition to being the Right Thing to do, this noticeably improves
the time taken to display the first page of search results, since it's
roughly an order of magnitude faster than the JSON parser.
Interestingly, it does *not* significantly improve the time to
completely fill a large search buffer because for large search
buffers, the cost of creating author invisibility overlays and
inserting text (which slows down with more overlays) dominates.
However, the time required to display the first page of results is
generally more important to the user experience.
Previously, search started the async notmuch process directly. Now,
it uses `notmuch-start-notmuch'. This simplifies the process sentinel
a bit and means that we no longer have to worry about errors
interleaved with the JSON output.
We also update the tests of Emacs error handling, since the error
output is now separated from the search results buffer.
We now check error handling more carefully in the last test in
test/emacs and we're about to add more error handling tests. (This
was also a strange place for this test, since it had nothing to do
with large search buffers.)
This unifies the part button actions and the underlying part action
functions into single interactive command that simply applies to the
part containing point using the just-added part p-list text property
instead of button properties. Since all part actions can be performed
by applying the appropriate mm function to an mm-handle, this patch
abstracts out the creation of mm handles, making the implementations
of the part commands trivial. This also eliminates our special
handling for part save in favor of using the appropriate mm function.
This necessarily modifies the way we handle the default part button
action, but in a way that does not change the meaning of the
notmuch-show-part-button-default-action defcustom.
Since these commands are no longer specific to buttons, this patch
eliminates the extra metadata stored with each button. This also
eliminates one rather special-purpose macro for a collection of
general purpose part handling utilities.
--stderr=FILE tests were added to test/help-test as it is the one
doing most global option testing. Also, it was simplest to test
this new option using `notmuch help` command.
Presently, the code which finds the parent of a message as it is being
added to the database assumes that the first Message-ID-like substring
of the In-Reply-To header is the parent Message ID. Some mail clients,
however, put stuff other than the Message-ID of the parent in the
In-Reply-To header, such as the email address of the sender of the
parent. This can fool notmuch.
The updated algorithm prefers the last Message ID in the References
header. The References header lists messages oldest-first, so the last
Message ID is the parent (RFC2822, p. 24). The References header is
also less likely to be in a non-standard
syntax (http://cr.yp.to/immhf/thread.html,
http://www.jwz.org/doc/threading.html). In case the References header
is not to be found, fall back to the old behavior.
V2 of this patch, incorporating feedback from Jani and (indirectly)
Austin.
The use of realpath(3) in
commit 58ed67992d
Author: Jani Nikula <jani@nikula.org>
Date: Sun Apr 7 20:15:03 2013 +0300
cli: config: do not overwrite symlinks when saving config file
broke config file save when the file does not exist, which results in
'notmuch setup' always failing to create a new config file.
Fix by checking ENOENT from realpath(3).
Use realpath to canonicalize the config path before writing.
Previously 'notmuch setup' and 'notmuch config set' overwrote the
config file even if it was a symbolic link.
We now have a notmuch_config_is_new() function to query whether a
config was created or not. Change the notmuch_config_open() is_new
parameter into boolean create_new to determine whether the function
should create a new config if one doesn't exist. This reduces the
complexity of the API.
When execution of tests is interrupted by signal coming outside of the
test system itself, output just one line "interrupted by signal <num>"
message to standard output. This distinguishes the case from internal
exit and reduces noise.
Set the variable '$test_subtest_name' in all functions which starts
a new test and use that variable in all functions that output
test results.
Additionally output the latest '$test_subtest_name' in case of
abnormal exit, to avoid confusion.
Instead of checking immediately for the watched process, delay a
minute, or in the case that process-attributes returns nil, for two
minutes. This is intended to cope with the case that
process-attributes is unimplimented, and returns always returns nil.
In this case, the watchdog check is the same as the two minute limit
imposed by timeout.
The TERM environment variable is set to 'dumb' when running tests, but
the original value of it is stored for echoing colors and running emacs
(somewhat interactively) in detached session. Emacs requires some
terminal control sequences to be available for interactive operation.
In case original TERM is (also) 'dumb' (or unset/empty) emacs cannot
run interactively. To fix this problem dtach (and emacs as it's child
process) is run with TERM=vt100 in case original TERM was unset, empty
or 'dumb'. This way there is a chance to run emacs tests with different
user terminals and potentially find problems there.
This test also serves as documentation of the quoting
requirements. The comment lines are so that it exactly matches the man
page. Nothing more embarrassing than having an example in the man page
fail.
The (now fixed) bug that this test revealed is that unquoted
message-ids with whitespace or other control characters in them are
split into several tokens by the Xapian query parser.
This is based on the similar test for notmuch restore, but the parser
in batch tagging mode is less tolerant of a few cases, in particular
those tested by illegal_tag.
We recently switched to popping up a buffer to report CLI errors, but
this was too intrusive, especially for transient errors and especially
since we made fewer things ignore errors. This patch changes this to
display a basic error message in the minibuffer (using Emacs' usual
error handling path) and, if there are additional details, to log
these to a separate error buffer and reference the error buffer from
the minibuffer message. This is more in line with how Emacs typically
handles errors, but makes the details available to the user without
flooding them with the details.
Given this split, we pare down the basic message and make it more
user-friendly, and also make the verbose message even more detailed
(and more debugging-oriented).
This switches the new batch-tag format away from using a home-grown
hex-encoding scheme for message IDs in the dump to simply using Xapian
queries with Xapian quoting syntax.
This has a variety of advantages beyond presenting a cleaner and more
consistent interface. Foremost is that it will dramatically simplify
the quoting for batch tagging, which shares the same input format.
While the hex-encoding is no better or worse for the simple ID queries
used by dump/restore, it becomes onerous for general-purpose queries
used in batch tagging. It also better handles strange cases like
"id:foo and bar", since this is no longer syntactically valid.
When we switch to using regular Xapian queries in the dump format, \n
will cause problems, so we disallow it. Specially, while Xapian can
quote and parse queries containing \n without difficultly, quoted
queries containing \n still span multiple lines, which breaks the
line-orientedness of the dump format. Strictly speaking, we could
still round-trip these, but it would significantly complicate restore
as well as scripts that deal with tag dumps. This complexity would
come at absolutely no benefit: because of the RFC 2822 unfolding
rules, no amount of standards negligence can produce a message with a
message ID containing a line break (not even Outlook can do it!).
Hence, we simply disallow it.
This patch corrects several undesirable behaviours:
1) Empty files were not detected, leading to buffer read overrun.
2) An initial blank line cause restore to silently abort
3) Initial comment line caused format detection to fail
notmuch_json_show_sanitize replaced "filename" field values even in part
structures, where the value is predictable. Make it only normalize the
filename value if it is an absolute path (begins with slash), which is
true of the Maildir filenames that were intended to be normalized away.
This slightly changes the output of an existing test since we now
report non-zero exits with a pop-up buffer instead of at the end of
the search results.
* test/emacs:
- Rename subtests "{Add,Remove} tag from notmuch-show view" to
"notmuch-show: {add,remove} single tag {to,from} single message"
to be consistent with the following tests.
- New subtest "notmuch-show: add multiple tags to single message":
`notmuch-show-add-tag' ("+") can add multiple tags to a message.
- New subtest "notmuch-show: remove multiple tags from single message":
`notmuch-show-remove-tag' ("-") can remove multiple tags from a message.
We want to test both that error/warning messages are generated when
they should be, and not generated when they should not be. This varies
between restore and batch tagging.
These one need the completed functionality in notmuch-restore. Fairly
exotic tags are tested, but no weird message id's.
We test each possible input to autodetection, both explicit (with
--format=auto) and implicit (without --format).
The quoting for ${SEARCH} is broken when it's supposed to be '*', and
it seems tricky to get it right. Just drop the variable and use '*'
directly. Before this, none of the messages ever matched, and the test
was comparing zeros.
test_expect_equal_json uses json.tool from the system Python. While
Python 2 wasn't picky about the encoding of stdin, Python 3 decodes
stdin strictly according to the environment. Since we set LC_ALL=C
for the tests, Python 3's json.tool was assuming stdin would be in
ASCII and aborting when it couldn't decode the UTF-8 characters from
some of the JSON tests. This patch sets the PYTHONIOENCODING
environment variable to utf-8 when invoking json.tool to override
Python's default encoding choice.
Without this change, GCC complains as follows:
gcc test/random-corpus.o test/database-test.o notmuch-config.o command-line-arguments.o lib/libnotmuch.a util/libutil.a parse-time-string/libparse-time-string.a -o test/random-corpus -lgmime-2.6 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -Wl,-rpath,/usr/lib -ltalloc -lxapian
/usr/bin/ld: lib/libnotmuch.a(database.o): undefined reference to symbol '_ZNSs4_Rep10_M_destroyERKSaIcE@@GLIBCXX_3.4'
/usr/bin/ld: note: '_ZNSs4_Rep10_M_destroyERKSaIcE@@GLIBCXX_3.4' is defined in DSO /usr/lib/libstdc++.so.6 so try adding it to the linker command line
/usr/lib/libstdc++.so.6: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make: *** [test/random-corpus] Error 1
We demonstrate the current notmuch restore parser being confused by
message-id's and tags containing non alpha numeric characters
(particularly space and parentheses are problematic because they are
not escaped by notmuch dump).
We save the files as hex escaped on disk so that terminal emulators
will not get confused if the test fails (as we mostly expect it to do).
Initial use case is testing dump and restore, so we only have
message-ids and tags.
The message ID's are nothing like RFC compliant, but it doesn't seem
any harder to roundtrip random UTF-8 strings than RFC-compliant ones.
Tags are UTF-8, even though notmuch is in principle more generous than
that.
updated for id:m2wr04ocro.fsf@guru.guru-group.fi
- talk about Unicode value rather some specific encoding
- call talloc_realloc less times
Initially, provide a way to create "stub" messages in the notmuch
database without corresponding files. This is essentially cut and
paste from lib/database.cc. This is a seperate file since we don't
want to export these symbols from libnotmuch or bloat the library with
non-exported code.
Previously, the test framework generated a variable name for each
external prereq as a poor man's associative array. Unfortunately,
prereqs names may not be legal variable names, leading to
unintelligible bash errors like
test_missing_external_prereq_emacsclient.emacs24_=t: command not found
Using proper associative arrays to track prereqs, in addition to being
much cleaner than generating variable names and using grep to
carefully construct unique string lists, removes restrictions on
prereq names.
Previously, if a test script aborted (e.g., because it passed too few
arguments to a test function), the test driver loop would simply
continue on to the next test script and the final results would
declare that everything passed (except that the test count would look
suspiciously low, but maybe you just misremembered how many tests
there were).
Now, if a test script exits with a non-zero status and did not produce
a final results file, we propagate that failure out of the driver loop
immediately.
To keep this simple, this patch removes the PID from the test-results
file name. This PID was inherited from the git test system and seems
unnecessary, since the file name already includes the name of the test
script and the test-results directory is created anew for each run.
And require that if TEST_EMACS is specified, so is TEST_EMACSCLIENT.
Previously, the test framework always used "emacsclient", even if the
Emacs in use was overridden by TEST_EMACS. This causes problems if
both Emacs 23 and Emacs 24 are installed, the Emacs 23 emacsclient is
the system default, but TEST_EMACS is set to emacs24. Specifically,
with an Emacs 24 server and an Emacs 23 client, emacs tests that run
very quickly may produce no output from emacsclient, causing the test
to fail.
The Emacs server uses a very simple line-oriented protocol in which
the client sends a request to evaluate an expression and the server
sends a request to print the result of evaluation. Prior to Emacs bzr
commit 107565 on March 11th, 2012 (released in Emacs 24.1), if
multiple commands were sent to the emacsclient between when it sent
the evaluation command and when it entered its receive loop, it would
only process the first response command, ignoring the rest of the
received buffer. This wasn't a problem with the Emacs 23 server
because it sent only the command to print the evaluation result.
However, the Emacs 24 server first sends an unprompted command
specifying the PID of the Emacs server, then processes the evaluation
request, then sends the command to print the result. If the
evaluation is fast enough, it can send both of these commands before
emacsclient enters the receive loop. Hence, if an Emacs 24 server is
used with an Emacs 23 emacsclient, it may miss the response printing
command, ultimately causing intermittent notmuch test failures.
Previously, many tests in emacs-subject-to-filename didn't quote the
$output argument to test_expect_equal. As a result, if $output was
empty, test_expect_equal would be passed only one argument and would
abort the entire test script. By quoting the argument, we ensure
test_expect_equal will always receive two arguments.
We now test for user ignore patterns before attempting to determine if
a directory entry is itself a directory. As a result, we no longer
abort for broken symlinks if the user has explicitly ignored them.
This fixes the test added in the previous patch. It also slightly
changes the debug output checked by another test of ignores.
The macro with-current-notmuch-show-message executes command
`notmuch show --format=raw id:...` which just outputs the contents
of the mail file verbatim (into temporary buffer). In case e.g. utf-8
locale is used the temporary buffer has buffer-file-coding-system as
utf-8. In this case Emacs converts the data to multibyte format, guessing
that input is in utf-8.
However, the "raw" (MIME) message may contain octet data in any other
8bit format, and as no (MIME-)content spesific handling to the message
is done at this point, conversion to other formats may lose information.
By setting coding-system-for-read 'no-conversion drops the conversion part
and makes this handle input as notmuch-get-bodypart-internal() does.
This marks the broken test in previous change fixed.
Previously, we would treat multi-message mboxes as one giant email,
which, besides the obvious incorrect indexing, often led to
out-of-memory errors for archival mboxes. Now we explicitly reject
multi-message mboxes. For historical reasons, we retain support for
single-message mboxes, but official deprecate this behavior.
This test is currently broken. Note that its brokenness cascades and
causes the next test to fail as well (because notmuch incorrectly
indexes the mbox file).
There are currently 45 TESTS scripts. 36 of those load
test-lib.sh using '. ./test-lib.sh' and 9 '. test-lib.sh'.
In latter case test-lib.sh is first searched from directories
in PATH (posix) and then from current directory (bash feature).
Changed the 9 files to execute '. ./test-lib.sh'. The test-lib.sh
should never be loaded from directory in PATH.
Previously, this would simply indicate that the grep failed without
any indication of the Emacs output it failed on. Now we take
advantage of the test framework's handling of stdout to display the
incorrect Emacs output if the test fails.
It seems we have never tested the case that restore --accumulate
actually adds tags. I noticed this when I started optimizing and no
tests failed.
The bracketing with "restore --input=dump.expected" are to make sure
we start in a known state, and we leave the database in a known state
for the next test.
The test designed to exercise Emacs' rendering of HTML emails
containing images inadvertently assumed w3m was available under Emacs
23. The real point of this test was to check that Emacs 24's shr
renderer didn't crash when given img tags, so use shr if it's
available, html2text otherwise (which is built in), and do only a
simple sanity check of the result.
This regexp agrees with Xapian query syntax much more closely, though
we specifically disallow various cases that would be confusing in the
context of an email body (e.g., punctuation at the end of an id: link
is not considered part of the id: link because it's probably part of
the surrounding text).
In particular, this handles id: links that are not surrounded by
quotes much better, which stash is much more likely to generate now
that we don't quote id's that don't need to be quoted. It also
handles quoted id: links better.
We update the buttonization test to reflect the new pattern.
This matches the current behavior of the buttonizer, so it passes, but
many of these cases are not what you'd want (and some of them aren't
even valid Xapian queries). The next patch will fix the handling of
these cases and update the test.
Over time, maintaining this very long regex has become irritating,
especially when resolving conflicts.
This patch replaces the call to sed with multiple extra arguments to
find. Since each test binary is now on it's own line, this should
make resolving conflicts easier.
Test the date/time parser module directly, independent of notmuch,
using the parse-time test tool.
Credits to Michal Sojka <sojkam1@fel.cvut.cz> for writing most of the
tests.
Add a smoke testing tool to support testing the date/time parser
module directly and independent of the rest of notmuch.
Credits to Michal Sojka <sojkam1@fel.cvut.cz> for the stdin parsing
idea and consequent massive improvement in testability.
Currently, we only properly escape stashed id queries, but there are
other places where the Emacs UI constructs queries for boolean terms.
Since this escaping function is meant to be used in other places, it
avoids escaping strings that don't need escaping.
This disallows adding empty tags, since nothing but confusion follows
in their wake, and disallows adding tags that begin with "-" because
they are also confusing, the tag "-" is impossible to remove using the
CLI, and because the syntax for removing such tags conflicts with long
argument syntax.
This does not place any restrictions on what tags can be removed, as
that would make it difficult for people who have the misfortune of
already having malformed tags to remove these tags.
Although messages are created in a particular order, it seems that
when they are created on a tmpfs, they do not always come back in the
same order, leading to the same files being ignored but being output
in a different order. This causes the test to fail because the outputs
being compared are the same.
Fix the failures by sorting the output of notmuch --debug and
comparing this to a hand-sorted version of its output.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
The use of --background option (instead of shell '&') ensures that
smtp-dummy is listening its server socket until execution of shell
script can continue, thus the client will always have socket where
to connect.
smtp-dummy outputs smtp_dummy_pid variable in shell assignment format;
eval'ing that output makes that variable available for the shell.
As the smtp-dummy instance is no longer child process of the script
the SIGKILL signal sent to it will ensure it is going away in case
the mail sender fails to connect to smtp-dummy.
When shell executes background process using '&' the scheduling of
that new process is arbitrary. It could be that smtp-dummy doesn't
get execution time to listen() it's server socket until some other
process attempts to connect() to it. The --background option in
smtp-dummy makes it to go background *after* it started to listen
its server socket.
When --background option is used, the line "smtp_dummy_pid='<pid>'"
is printed to stdout from where shell can eval it.
Demonstrates that *every* file/directory which matches one of the values
in 'new.ignore' will be ignored, independent of its depth/location in
the mail store.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Obviates the need to create a 'NOTMUCH_NEW' clone which runs
'notmuch new --debug'. This will be used in a later patch.
Doesn't cause any issues for other tests.
* test/emacs:
- New subtest "notmuch-show: collapse all messages in thread":
`notmuch-show-open-or-close-all' with prefix arg ("C-u M-RET")
collapses all messages in thread.
- New subtest "notmuch-show: uncollapse all messages in thread":
`notmuch-show-open-or-close-all' without prefix arg ("M-RET")
uncollapses all messages in thread.
* test/emacs:
- New subtest "notmuch-show: show message headers":
Setting `notmuch-message-headers-visible' to t causes all headers
defined in `notmuch-message-headers' to be shown.
- New subtest "notmuch-show: hide message headers":
Setting `notmuch-message-headers-visible' to nil causes all headers
defined in `notmuch-message-headers' to be hidden.
("Subject:" may be an exception; See the use of `headers-start' in
`notmuch-show-insert-msg')
- New subtest "notmuch-show: hide message headers (w/ notmuch-show-toggle-headers)":
Setting `notmuch-message-headers-visible' to t causes all headers
defined in `notmuch-message-headers' to be shown, but they can be
hidden for the current message by running `notmuch-show-toggle-headers'.
This requires changing the contents of the crypto tests, as one thread
that was marked read by the earlier tests in test/emacs is no longer
marked read.
This moves tests for:
- 09d19ac "test: emacs: toggle eliding of non-matching messages in
`notmuch-show'", which should have actually read: "test: emacs:
toggle processing of cryptographic MIME parts in `notmuch-show'".
See commit 19ec74c5.
- 5ea1dbe "test: emacs: toggle eliding of non-matching messages in
`notmuch-show'"
- 345faab "test: emacs: toggle thread content indentation in
`notmuch-show'"
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Since $TEST_DIRECTORY is an absolute path, any filenames generated
with it will be complete paths. Only use the basename to generate
suffixes for filenames.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Most Emacs tests end with a call to (test-output), which saves the
buffer to a filed called OUTPUT. Previously, if the test code failed
with an exception before this call, the test framework would then
compare against the OUTPUT file from the last Emacs test, resulting in
confusing diffs.
This requires one tweak to an emacs test that made two calls to
test_emacs and expected an OUTPUT file from the first call. We simply
reverse the order of the test_emacs calls.
On FreeBSD, and probably anywhere else someone installed xapian to
some other prefix, we need to use XAPIAN_LDFLAGS to make the linker can
actually find libxapian.
Before the change, test_expect_equal_file() function treated the first
argument as "actual output file" and the second argument as "expected
output file". When the test fails, the files are copied for later
inspection. The first files was copied to "$testname.output" and the
second file to "$testname.expected". The argument order for
test_expect_equal_file() is often wrong which results in confusing
diff output and incorrectly named files.
The patch solves the issue by changing test_expect_equal_file() to
treat arguments just as two files, without any special properties
(like "actual" and "expected"). The file names for copying is now
based on the given file name: "$testname.$file1" and
"$testname.$file2". E.g. if test_expect_equal_file() is called with
"OUTPUT" and "EXPECTED", the copied files can be named
"emacs.1.OUTPUT" and "emacs.1.EXPECTED".
The down side of this approach is that diff argument order depends on
test_expect_equal_file() argument order. So sometimes we get diff
from expected to actual results, and sometimes the other way around.
But the files are always named correctly.
The behaviour of "emacsclient --eval nil" changed from emacs23 to
emacs24, and in emacs24 it prints 'nil' rather than an empty string.
(format "%S" foo) produces a sexpr form of foo, and is consistent
between the two versions.
The version of message.el in emacs24 omits the charset=us-ascii,
causing the current version of this test to fail. With this patch, we
accept either option. According to RFC 2046, they are semantically
equivalent.
When running emacs tests using emacs 23.1.1 the tests block (until timeout)
when emacs function (notmuch-test-wait) is called.
There is an emacs bug #2930 titled:
23.0.92; `accept-process-output' and `sleep-for' do not run sentinel
It seems this is present in emacs 23.1.
Calling list-processes after accept-process-output seems work around
this problem; in case Emacs version is 23.1 a defadvice is activated
to do just that.
notmuch-test-wait called sleep-for in a loop to wait unconditionally 0.1
seconds while waiting for process to exit.
accept-process-output returns as soon as there is any data available
from process, so using it avoids unnecessary fixed delays.
Both of these functions run process sentinels.
The string function in a sprinter may be called with a NULL string
pointer (eg if a header is absent). This causes a segfault. We fix
this by checking for a null pointer in the string functions and update
the sprinter documentation.
At the moment some output when format=text is done directly rather than
via an sprinter: in that case a null pointer is passed to printf or
similar and a "(null)" appears in the output. That behaviour is not
changed in this patch.
The syntax --output=filename is a smaller change than deleting the
output argument completely, and conceivably useful e.g. when running
notmuch under a debugger.
Format canonicalization of JSON output is no longer necessary, so
remove it. Value canonicalization (e.g., normalizing thread IDs) is
still necessary, so all of the sanitization functions remain.
Previously, we used a variety of ad-hoc canonicalizations for JSON
output in the test suite, but were ultimately very sensitive to JSON
irrelevancies such as whitespace. This introduces a new test
comparison function, test_expect_equal_json, that first pretty-prints
*both* the actual and expected JSON and the compares the result.
The current implementation of this simply uses Python's json.tool to
perform pretty-printing (with a fallback to the identity function if
parsing fails). However, since the interface it introduces is
semantically high-level, we could swap in other mechanisms in the
future, such as another pretty-printer or something that does not
re-order object keys (if we decide that we care about that).
In general, this patch does not remove the existing ad-hoc
canonicalization because it does no harm. We do have to remove the
newline-after-comma rule from notmuch_json_show_sanitize and
filter_show_json because it results in invalid JSON that cannot be
pretty-printed.
Most of this patch simply replaces test_expect_equal and
test_expect_equal_file with test_expect_equal_json. It changes the
expected JSON in a few places where sanitizers had placed newlines
after commas inside strings.
These extra directories cause problems for building on Debian
twice in a row.
In order to remove directories, we need to us "rm -rf" instead of
"rm -f". So now we should be extra careful what we add to the
variable CLEAN.
This patch switches from the current ad-hoc printer to the structured
formatters in sprinter.h, sprinter-text.c and sprinter-json.c.
The JSON tests are changed slightly in order to make them PASS for the
new structured output formatter.
The text tests pass without adaptation.
The JSON format eliminates the complex escaping issues that have
plagued the text search format. This uses the incremental JSON parser
so that, like the text parser, it can output search results
incrementally.
This slows down the parser by about ~4X, but puts us in a good
position to optimize either by improving the JSON parser (evidence
suggests this can reduce the overhead to ~40% over the text format) or
by switching to S-expressions (evidence suggests this will more than
double performance over the text parser). [1]
This also fixes the incremental search parsing test.
This has one minor side-effect on search result formatting.
Previously, the date field was always padded to a fixed width of 12
characters because of how the text parser's regexp was written. The
JSON format doesn't do this. We could pad it out in Emacs before
formatting it, but, since all of the other fields are variable width,
we instead fix notmuch-search-result-format to take the variable-width
field and pad it out. For users who have customized this variable,
we'll mention in the NEWS how to fix this slight format change.
[1] id:"20110720205007.GB21316@mit.edu"
This advises the search process filter to make it process one
character at a time in order to test the pessimal case for incremental
search output parsing.
The text parser fails this test because it gets tricked into thinking
a parenthetical remark in a subject is the tag list.
There didn't seem to be these basic tests for --format=text,
as there are for --format=json. These are just the tests from
the `json' script, with adjusted expected outputs.
Previously, notmuch new only synchronized maildir flags to tags for
files with a maildir "info" part. Since messages in new/ don't have
an info part, notmuch would ignore them for flag-to-tag
synchronization.
This patch makes notmuch consider messages in new/ to be legitimate
maildir messages that simply have no maildir flags set. The most
visible effect of this is that such messages now automatically get the
unread tag.
Currently, notmuch new only synchronizes maildir flags to tags for
files that have an "info" part. However, in maildir, new mail doesn't
gain the info part until it moves from new/ to cur/. Hence, even
though mail in new/ doesn't have an info part, it is still a maildir
message and thus has maildir flags (though none of them set).
The most visible effect of not synchronizing maildir flags for
messages in new/ is that newly delivered messages don't get the unread
tag (unless it is assigned by some other mechanism, like new.tags).
This patch does *not* modify the test for messages in cur/ that do not
have an "info" part. Unlike a message in new/, a message in cur/
without an info part is no longer a maildir message, and thus
shouldn't be subject to maildir flag synchronization.
Add tests for picking up user's From address from fallback headers
Envelope-To, X-Original-To, and Delivered-To.
Signed-off-by: Jani Nikula <jani@nikula.org>
This moves our logic to get a file's type into one function. This has
several benefits: we can support OSes and file systems that do not
provide dirent.d_type or always return DT_UNKNOWN, complex
symlink-handling logic has been replaced by a simple stat fall-through
in one place, and the error message for un-stat-able file is more
accurate (previously, the error always mentioned directories, even
though a broken symlink is not a directory).
Now that notmuch_database_find_message_by_filename works on read-only
databases, remove the workaround that disabled it on read-write
databases.
This also adds a regression test for find_message_by_filename.
The customization widget referred to a non-existing function
`notmuch-hello-insert-query-list'. The patch changes it to the
correct one - `notmuch-hello-insert-searches'. The relevant test is
fixed now.
The tests use default values from customization widgets to make sure
that these customization widgets work (at least on basic level).
The custom queries section test is currently broken.
The output of the HTML reply test in the emacs suite can vary
depending on which HTML renderers are installed on the machine running
the tests. The renderer that is always available is emacs's builtin
html2text function. In order to get consistency, force the test to use
html2text even if other renderers are available.
Quote non-text parts nicely by displaying them with mm-display-part
before calling message-cite-original to quote them. HTML-only emails
can now be quoted correctly. We re-use some code from notmuch-show
(notmuch-show-mm-display-part-inline), which has been moved to
notmuch-lib.el.
Mark the test for this feature as not broken.
With the latest reply infrastructure, we should be able to nicely
quote HTML-only emails. But currently emacs quotes the raw HTML
instead of parsing it first. This commit adds a test for this case.
This test currently marked as broken.
It has been a long-standing issue that notmuch_database_open doesn't
return any indication of why it failed. This patch changes its
prototype to return a notmuch_status_t and set an out-argument to the
database itself, like other functions that return both a status and an
object.
In the interest of atomicity, this also updates every use in the CLI
so that notmuch still compiles. Since this patch does not update the
bindings, the Python bindings test fails.
Add a command to list all configuration items with their associated
values.
One use is as follows: a MUA may prefer to store data in a central
notmuch configuration file so that the data is accessible across
different machines, e.g. an addressbook. The list command helps
to implement features such as tab completion on the keys.
This patch removes trailing spaces in notmuch-hello view.
A side effect of this change is that tag/query buttons no longer
include a space at the end. This means that pressing RET when the
point is at the first character after the tag/query button no longer
works (note that this is the standard behavior for buttons). We may
change this behavior in the future (without adding trailing spaces
back) if people would find this change inconvenient.
Systematically test the exclude options for search. Also move the
search existing exclude tests into the new test. There is some overlap
between the two sets of tests but many of the existing ones are there
because they triggered bugs in the past so I have kept them to ensure
coverage.
Move the option --no-exclude to the --exclude= scheme. Since there is
no way to flag messages only true and false are implemented. Note
that, for consistency with other commands, this is implemented as a
keyword option rather than a boolean option.
In the new reply code, the References header gets inserted by
message.el using a function called message-shorten-references. Unlike
all the other header-inserting functions, it doesn't put a newline
after the header, causing the next header to end up on the same
line. In our case, this header happened to be User-Agent, so it's hard
to notice. This is probably a bug in message.el, but we need to work
around it.
This fixes the problem by wrapping message-shorten-references in a
function that inserts a newline after if necessary. This should
protect against the message.el bug being fixed in the future.
By default, emacs hides the User-Agent and References headers when
composing mail. This is a good thing for users, but a bad thing for
testing, since we can create ugly or invalid headers and not have it
show up in the tests.
By setting message-hidden-headers to an empty list, we force emacs to
show all the headers, so we can check that they're correct. Users
won't see this, but it will let us catch future bugs.
As a side-effect, this breaks all the reply tests, since there is a
bug with the References and User-Agent headers, fixed in the next commit.
Bug 1: Replying from alternate addresses
----------------------------------------
The reply code was inconsistent in its use of symbols and strings for
header names being passed to message.el functions. This caused the
From header to be lookup up incorrectly, causing an additional From
header to be added with the user's primary address instead of the
correct alternate address.
This is fixed by using symbols everywhere, i.e. never using strings
for header names when interacting with message.el.
This change also removes our use of `mail-header`, since we don't use
it anywhere else, and using assq makes it clear how the header lists
are expected to work.
Bug 2: Duplicate headers in emacs 23.2
--------------------------------------
The message.el code in emacs 23.2 assumes that header names will
always be passed as symbols, so our use of strings caused
problems. The symptom was that on 23.2 (and presumably on earlier
versions) the reply message would end up with two of some headers.
Converting everything to symbols also fixes this issue.
Since the recent reply changes were pushed, there has been a bug that
causes emacs to always reply from the primary address, even if the
JSON or default CLI reply output uses an alternate address.
This adds two tests to the emacs test library based on the two "Reply
form..." tests in the reply test library. One is currently marked
broken.
This adds a lib function to turn a message ID into a properly escaped
message ID query and uses this function wherever we previously
hand-constructed ID queries. Wherever this new function is used,
documentation has been clarified to refer to "id: queries" instead of
"message IDs".
This fixes the broken test introduced by the previous patch.
To simplify code, keep all tagging operations in a single array
instead of separate add and remove arrays. Apply tag changes in the
order specified on the command line, instead of first removing and
then adding the tags.
This results in a minor functional change: If a tag is both added and
removed, the last specified operation is now used. Previously the tag
was always added. Change the relevant test to reflect the new
behaviour.
Signed-off-by: Jani Nikula <jani@nikula.org>
The current behaviour is that regardless of the order in which the
addition and removal of a tag are specified, the tag is added.
Signed-off-by: Jani Nikula <jani@nikula.org>
Use the new JSON reply format to create replies in emacs. Quote HTML
parts nicely by using mm-display-part to turn them into displayable
text, then quoting them with message-cite-original. This is very
useful for users who regularly receive HTML-only email.
Use message-mode's message-cite-original function to create the
quoted body for reply messages. In order to make this act like the
existing notmuch defaults, you will need to set the following in
your emacs configuration:
message-citation-line-format "On %a, %d %b %Y, %f wrote:"
message-citation-line-function 'message-insert-formatted-citation-line
The tests have been updated to reflect the (ugly) emacs default.
This new JSON format for replies includes headers generated for a
reply message as well as the headers of the original message. Using
this data, a client can intelligently create a reply. For example, the
emacs client will be able to create replies with quoted HTML parts by
parsing the HTML parts.
This adds three tests for --output=messages searches. One test is for
the case when one exclude tag does not occur in the Xapian
database. This triggers a Xapian bug in some cases and causes the
whole exclusion to fail. The next commit avoids this bug.
The tests for the exclude code in search and count use the line
notmuch config set search.exclude_tags = deleted
which actually sets the exclude tags to be "=" and "deleted". Remove
the "=" from this line.
Before the change, messages generated by generate_message() used "Test
message #N" for default subject where N is the generated messages
counter. Since message subject is commonly present in expected
results, there is a chance of breaking other tests when a new
generate_message() call is added. The patch changes default subject
value for generated messages to subtest name if it is available. If
subtest name is not available (i.e. message is generated during test
initialization), the old default value is used (in this case it is
fine to have the counter in the subject).
Another benefit of this change is a sane default value for subject in
generated messages, which would allow to simplify code like:
test_begin_subtest "test for a cool feature"
add_message [subject]="message for test for a cool feature"
Before the change, the first subtest in raw format tests just
generated messages and checked that they are added successfully. This
is not really a raw format test, it is creating of environment
required for other subtests to run. The patch removes the first
subtest from raw and replaces it with bare add_message calls, similar
to how it is done in other tests.
TODO: we should check that test environment was created successfully.
Currently, many tests do add_message(), notmuch new and other calls
without checking the results. We should come up with a general
solution for this, i.e. if any command during test initialization
fails, all tests should be skipped with appropriate error message.
This is fully compatible for root and leaf parts, but now has proper
support for interior parts. This requires some design decisions that
were guided by what I would want if I were to save a part.
Specifically:
- Leaf parts are printed without headers and with transfer decoding.
This is what makes sense for saving attachments. (Furthermore, the
transfer decoding is necessary since, without the headers, the
caller would not be able to interpret non-transfer-decoded output.)
- Message parts are printed with their message headers, but without
enclosing part headers. This is what makes sense for saving a
message as a whole (which is a message part) and for saving attached
messages. This is symmetric for whole messages and for attached
messages, though we special-case the whole message for performance
reasons (and corner-case correctness reasons: given malformed input,
GMime may not be able to reproduce it from the parsed
representation).
- Multipart parts are printed with their headers and all child parts.
It's not clear what the best thing to do for multipart is, but this
was the most natural to implement and can be justified because such
parts can't be interpreted without their headers.
As an added benefit, we can move the special-case code for part 0 into
the raw formatter.
Previously, there was only one CRLF between the terminating boundary
of the embedded multipart/alternative and the boundary of the
containing multipart. However, according the RFC 1341, 7.2.1:
The boundary must be followed immediately either by another CRLF and
the header fields for the next part, or by two CRLFs, in which case
there are no header fields for the next part
and
The CRLF preceding the encapsulation line is considered part of the
boundary so that it is possible to have a part that does not end
with a CRLF (line break).
Thus, there must be *two* CRLFs between these boundaries: one that
ends the terminating boundary and one that begins the enclosing
boundary.
While GMime accepted the message we had before, it could not produce
such a message.
gmime-2.6 had a bug [1] which made it impossible to tell why a signature
verification failed when the signer key was unavailable (empty "sigstatus" field
in the JSON output). Since 00b5623d the corresponding test is marked as broken
when using gmime-2.6 (2.4 is fine).
This bug has been fixed in gmime 2.6.5, which is now the minimal gmime-2.6
version required for building notmuch (gmime-2.4 is still available). As a
consequence the version check in test/crypto can be removed.
[Added by db]
Although less unambigously a bug, Gmime 2.6 prior to 2.6.7 also was
more strict about parsing, and rejected messages with initial "From "
headers. This restriction is relaxed in [2]. For reasons explained in [3],
we want to keep this more relaxed parsing for now.
[1] https://bugzilla.gnome.org/show_bug.cgi?id=668085
[2] http://git.gnome.org/browse/gmime/commit/?id=d311f576baf750476e06e9a1367a2dc1793ea7eb
[3] id:"1331385931-1610-1-git-send-email-david@tethera.net"
notmuch show outputs the exclude flag so many tests using notmuch
show failed. This commit adds "excluded:0" or "excluded: false" to
the expected outputs. After this commit there should be no failing
tests.
notmuch-search.c now returns all matching threads even if it the
match is a search.tag_excluded message (but with a mark indicating
this). Update the test to reflect this.
This has three ramifications:
- Blank To and Cc headers are no longer output for messages.
- Dates are now canonicalized for messages, which means they always
have a day of the week and GMT is printed +0000 (never -0000)
- Invalid From message headers are handled slightly differently, since
they get parsed by GMime now instead of notmuch.
Previously, top-level message headers were printed as Subject, From,
To, Date, while embedded message headers were printed From, To,
Subject, Date. This makes both cases use the former order and updates
the tests accordingly.
Emails that are encoded differently than as ASCII or UTF-8 are not
indexed properly by notmuch. It is not possible to search for non-ASCII
words within those messages.
Consensus seems to be that people prefer that refreshing show buffers
retains state by default, rather than resetting it by default. This
turns out to be the case in the code, as well. In fact, there's even
a test for this that's been marked broken for several months, which
this patch finally gets to mark as fixed.
* emacs/notmuch-show.el
(notmuch-show-stash-mlarchive-link-alist):
New defcustom of type `alist' (key = name, value = URI),
containing Mailing List Archive URI's for searching by Message-Id.
(notmuch-show-stash-mlarchive-link-default):
New defcustom, default MLA to use when `notmuch-show-stash-mlarchive-link'
received no user input whatsoever. Available choices are generated using
the contents of `notmuch-show-stash-mlarchive-link-alist'.
(notmuch-show-stash-map):
Added keybinds "l" and "L" for `notmuch-show-stash-mlarchive-link'
respectively `notmuch-show-stash-mlarchive-link-and-go'.
(notmuch-show-stash-mlarchive-link):
New function, stashes a URI pointing to the current message at one
of the MLAs configured in `notmuch-show-stash-mlarchive-link-alist'.
Prompts user with `completing-read' if not provided with an MLA key.
(notmuch-show-stash-mlarchive-link-and-go):
New function, uses `notmuch-show-stash-mlarchive-link' to
stash a URI, and then visits it using the browser configured
in `browse-url-browser-function'.
Based on original work [1] by David Edmondson <dme@dme.org>.
[1] id:"1327397873-20596-1-git-send-email-dme@dme.org"
`notmuch-show-stash-mlarchive-link' stashes a URI pointing to the current message
at one of the MLAs configured in `notmuch-show-stash-mlarchive-link-alist'.
Marked as "broken": fixed in next commit.
When tests are skipped due to missing prereqs, those prereqs are only
displayed when running with the `--verbose' option. This is essential
information when troubleshooting, so always send to stdout.
A new configuration key 'new.ignore' is used to determine which
files and directories user wants not to be scanned as new mails.
Mark the corresponding test as no longer broken.
This work merges my previous attempts and Andreas Amann's work
in id:"ylp7hi23mw8.fsf@tyndall.ie"
Files and directories which are specified in 'new.ignore' in the
config file shouldn't be indexed nor reported by `notmuch new'.
This is basically Pieter's work with Austin's comments addressed.
This makes the text formatter take advantage of the new code
structure. The previously duplicated header logic is now unified,
several things that we used to compute repeatedly across different
callbacks are now computed once, and the code is simpler overall and
32% shorter.
Unifying the header logic causes this to format some dates slightly
differently, so the two affected test cases are updated.
After the recent tagging operations changes, functions bound to "+"
and "-" in notmuch-search and notmuch-show views always read input
from the minibuffer. Use kbd macros instead of calling them directly.
`Notmuch-wash-region-to-button' is the function that creates hidden
regions with buttons for signatures, citations and original messages.
Before the change, it did not work correctly if the to-be-hidden
region started at the beginning of a message: the visibility toggle
button was hidden as well. The patch fixes this. There are two parts
in the fix:
* Use `insert-before-markers' instead of `insert' for creating the
button, so that it does not get added to the hidden overlay.
* Stop using PREFIX argument for adding a newline before the button.
The newline should not be added before a button at the beginning of
buffer.
The corresponding test is fixed now.
The test is currently broken and will be fixed by a subsequent patch.
The patch adds a new file for tests of Emacs notmuch-show view.
Based on patch by David Edmondson [1].
[1] id:"1327562380-12894-4-git-send-email-dme@dme.org"
Emacs message-mode uses certain text strings to indicate how to attach
files to outgoing mail. If these are present in the text of an email,
and a user is tricked into replying to the message, the user’s files
could be exposed.
Edited-by: Pieter Praet <pieter@praet.org>: Rebased to release branch.
The test is broken at this time; the next commit will introduce a fix.
Edited-by: Pieter Praet <pieter@praet.org>:
Rebased to release branch, moved expected output into the actual test,
and fixed "Fcc:" line.
`mail-header-parse-address' expects un-decoded mailbox parts, which is
not what we have at this point. Replace it with simple string
deconstruction.
Mark the corresponding test as no longer broken.
Minor whitespace cleanup.
Before the change, "s" in notmuch-hello buffer would jump to the
search box. The patch changes the binding to `notmuch-search' which
is consistent with all other notmuch buffers.
Add a new test function to allow simpler testing of emacs
functionality.
`test_emacs_expect_t' takes one argument - a lisp expression to
evaluate. The test passes if the expression returns `t', otherwise it
fails and the output is reported to the tester.
When checking for a running emacs, test_emacs evaluates the empty list
'()'. This returns 'nil' when emacs is running, which is then
prepended to the actual test result. Given that it is not part of the
actual test output the test harness can incorrectly report test
failure (or success).
Currently, the 'search.exclude_tags' option is automatically
set to "deleted;spam;" if it's missing from the config file.
This violates the Principle of Least Surprise, so *only* set
'search.exclude_tags' to "deleted;spam;" if we didn't find a
configuration file at all.
This patch is actually Austin Clements' work:
id:"20120117203211.GQ16740@mit.edu"
Currently, the 'search.exclude_tags' option is automatically set to
"deleted;spam;" if it's missing from the config file.
This violates the Principle of Least Surprise, so update the tests to
*only* expect the exclusion of messages which are tagged "deleted" if the
'search.exclude_tags' option is explicitly set *and* contains that tag.
Previously, top-level message headers were printed as Subject, From,
To, Date, while embedded message headers were printed From, To,
Subject, Date. This makes both cases use the former order and updates
the tests accordingly.
Strangely, the raw format also uses this function, so this also fixes
the two raw format tests affected by this change.
emacsclient --eval '(kill-emacs)' makes emacs versions 23.1
and 23.2 ask user input from running emacs. Redefining
yes-or-no-p function when kill-emacs is executed for these
emacs versions in test-lib.el avoids this test problem.
Used emacs (whitespace-cleanup) function to "cleanup blank problems"
in test files where that could be done without breaking tests;
test/emacs was partially, and test/multipart was fully reverted.
There are lots of API changes in gmime 2.6 crypto handling. By adding
preprocessor directives, it is however possible to add gmime 2.6 compatibility
while preserving compatibility with gmime 2.4 too.
This is mostly based on id:"8762i8hrb9.fsf@bookbinder.fernseed.info".
This was tested against both gmime 2.6.4 and 2.4.31. With gmime 2.4.31, the
crypto tests all work fine (as expected). With gmime 2.6.4, one crypto test is
currently broken (signature verification with signer key unavailable), most
likely because of a bug in gmime which will hopefully be fixed in a future
version.
This makes `show-trailing-whitespace' happy, i.e. it does not mark the
whole search box line as trailing spaces.
Since the dot is invisible, this change makes no visible difference
for `notmuch-hello'.
Edited-by: Pieter Praet <pieter@praet.org> to fix the tests.
Add an explicit note to the README explaining what programs are
necessary and the perhaps-surprising behavior of skipping tests if
they aren't present.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
This adds a "search" section to the config file and an
"auto_tag_exclusions" setting in that section. The search and count
commands pass tag tags from the configuration to the library.
If a message was received to the user's address that was in a named
group list, notmuch reply does not use that address for picking the
from address.
Groups lists are of the form: foo:bar@example.com,baz@example.com;
Signed-off-by: Jani Nikula <jani@nikula.org>
When running the Emacs tests in verbose mode, only the first missing
prereq is reported because the `run_emacs' function is short-circuited
early:
#+begin_example
emacs: Testing emacs interface
missing prerequisites: [0] emacs(1)
skipping test: [0] Basic notmuch-hello view in emacs
SKIP [0] Basic notmuch-hello view in emacs
#+end_example
This can lead to situations reminiscent of "dependency hell", so instead
of returning based on each individual `test_require_external_prereq's exit
status, we now do so only after checking all the prereqs:
#+begin_example
emacs: Testing emacs interface
missing prerequisites: [0] dtach(1) emacs(1) emacsclient(1)
skipping test: [0] Basic notmuch-hello view in emacs
SKIP [0] Basic notmuch-hello view in emacs
#+end_example
Also added missing prereq for dtach(1).
As reported in
id:"CAEbOPGyuHnz4BPtDutnTPUHcP3eYcRCRkXhYoJR43RUMw671+g@mail.gmail.com"
sometimes gmime tries to access a NULL pointer, e.g. g_mime_iconv_open()
tries to access iconv_cache that is NULL if g_mime_init() is not called.
This causes notmuch to segfault when calling gmime functions.
Calling g_mime_init() initializes iconv_cache and others variables needed
by gmime, making sure they are initialized when notmuch calls gmime
functions.
Test marked fix by db.
One is quoted printable, the other users 8 bit encoding. The latter
triggers a bug in the python bindings due to missing call to
g_mime_init. The corresponding test is marked broken in this commit.
Tester may have set LD_LIBRARY_PATH to find libraries required
by notmuch. Therefore add $TEST_DIRECTORY/../lib to the beginning
of current list of library paths in $LD_LIBRARY_PATH before running
symbol-test.
It makes no sense to run test-lib.sh, so it makes no sense to give it
an interpreter. This is particularly annoying for Emacs users who
have executable-insert set, since the presence of the #! line will
cause Emacs to mark test-lib.sh executable when saving it, which will
in turn case the 'basic' test to fail.
January 5, 2001 was a Tuesday, not a Friday. Jameson fixed this exact
problem for the multipart test in ec2b0a98cc, but not for
generate_message itself.
As Jameson pointed out in ec2b0a98cc, if we want to test date parsing,
we should do it separately.
As we start to pay more attention to emacs24, it helps to be able to
select a different version of emacs to run the tests with to verify
version specific bugs.
A separate variable TEST_EMACS is needed to avoid being overwritten by the
make variable EMACS in Makefile.config
For what it's worth, the value of emacs is chosen at the time
tmp.emacs/run_emacs is created, so is fixed for all subtests.
Test that `notmuch-hello-refresh-hook' is called once when
`notmuch-hello' is called and twice when calling
`notmuch-hello-update' after that.
The tests are very similar to tests for `notmuch-hello-mode-hook'.
`notmuch-hello' should call `notmuch-hello-mode' function only when
run for the first time. But before the change, `notmuch-hello' used
`kill-all-local-variables' to remove editable widgets fields. This
caused the major mode to be reset, and `notmuch-hello-mode' to be
called every time.
The patch manually deletes all editable widget fields and removes
`kill-all-local-variables' call.
Add `notmuch-hello-mode-hook-counter' hook to count how many times
`notmuch-hello-mode-hook' was called. The counter function increments
`notmuch-hello-mode-hook-counter' variable value if it is bount,
otherwise it does nothing.
The idea is that $test_count could be used in tests to label
intermediate files. The output enabled by this patch (and --debug)
helps figure out which OUTPUT.nn file belongs to which test in case
several subtests write to OUTPUT.$test_count
binutils-2.22 changes the behaviour of ld by defaulting to
--no-copy-dt-needed-entries, which means that required objects/libs are not
"indirectly" linked through intermediate objects/libs anymore. As a consequence,
when using binutils-2.22, building symbol-test fails with the following error:
/usr/bin/ld: test/symbol-test.o: undefined reference to symbol
'std::basic_string<char, std::char_traits<char>, std::allocator<char>
>::~basic_string()@@GLIBCXX_3.4'
/usr/bin/ld: note: 'std::basic_string<char, std::char_traits<char>,
std::allocator<char> >::~basic_string()@@GLIBCXX_3.4' is defined in DSO
/usr/lib/libstdc++.so.6 so try adding it to the linker command line
/usr/lib/libstdc++.so.6: could not read symbols: Invalid operation
An easy fix is to link using CXX instead of CC.
This reverts commit c6a3a768fe.
This test is unreliable, showing BROKEN in some environments and FIXED
in others. The confusion seems to outweigh the benefits, for now.
Conflicts:
test/emacs
Some distros (Arch Linux) ship Python as python2 and Python 3 as python.
Checking for python2 is necessary for the Python tests to work on these
platforms.
The new test_python() function makes writing Python tests a little easier:
- it sets the environment variables as needed
- it redirects stdout to the OUTPUT file (like test_emacs()).
This commit also declares python as an external prereq.
The stdout redirection is required to avoid trouble when running commands like
"python 'script' | sort > OUTPUT": in such a case, any error due to a missing
external prereq would be "swallowed" by sort, resulting to a failed test instead
of a skipped one.
expect the date_relative field for thread entries
in notmuch search's json output
note from Commiter: we don't have to worry about the date changing
because the date in question is more than 180 days old.
Before the change, there was a workaround to avoid notmuch show calls
for parts with application/* Content-Type. But non-inlinable parts
are not limited to this Content-Type (e.g. mp3 files have audio/mpeg
Content-Type and are not inlinable). For such parts
`notmuch-show-insert-part-*/*' handler is called which unconditionally
fetches contents for all parts.
The patch moves content fetching from `notmuch-show-insert-part-*/*'
to `notmuch-show-mm-display-part-inline' function after MIME inlinable
checks are done to avoid useless notmuch show calls. The
application/* hack is no longer needed and removed.
The patch adds two new test cases:
* Do not call notmuch for non-inlinable application/mpeg parts
* Do not call notmuch for non-inlinable audio/mpeg parts
The application/mpeg test passes thanks to a workaround for
application/* Content-Types. The audio/mpeg is currently broken.
The patch adds two auxiliary functions and a variable:
notmuch_counter_reset
$notmuch_counter_command
notmuch_counter_value
They allow to count how many times notmuch binary is called.
notmuch_counter_reset() function generates a script that counts how
many times it is called and resets the counter to zero. The function
sets $notmuch_counter_command variable to the path to the generated
script that should be called instead of notmuch to do the counting.
The notmuch_counter_value() function returns the current counter
value.
We start modestly, with a (slightly modified) test case from Kazuo
Teramoto. Originally it just made sure the bindings didn't crash; here
we check that by comparing the output with that of notmuch search.
The fake missing binary functions check if the binary has already be
added to the diagnostic message to avoid duplicates. Unfortunately,
this check was buggy because the message string does not have the
trailing space.
test_missing_external_prereq_${binary}_ variable indicates that the
binary is missing. It must be set in test_declare_external_prereq()
outside of the fake $binary() function.
If emacs is not available, test_expect_equal would be called with only
one argument. The patch fixes this by quoting the (possibly empty)
$(cat OUTPUT) argument.
Some tests (e.g. crypto) do a common initialization required for all
subtests. The patch adds a check for missing external dependencies
during this initialization. If any prerequisites are missing, all
subtests are skipped.
The check is run on the first call of test_reset_state_ function, so
no changes for the tests are needed.
There is existing support for general prerequisites in the test suite.
But it is not very convenient to use: every test case has to keep
track for it's dependencies and they have to be explicitly listed.
The patch aims to add better support for a particular type of external
dependencies: external executables. The main idea is to replace
missing external binaries with shell functions that have the same
name. These functions always fail and keep track of missing
dependencies for a subtest. The result reporting functions later can
check that an external binaries are missing and correctly report SKIP
result instead of FAIL. The primary benefit is that the test cases do
not need to declare their dependencies or be changed in any way.
If symbol-test is built in symbol-hiding with hardcoded g++ invokation,
it's not so easy to pass $(srcdir) which is required to find notmuch.h
when srcdir and builddir are separate directories.
Basic test 'Ensure that all available tests will be run by
notmuch-test' compares all tests that are run with listing of test/
directory. There is a growing list of exceptions for files and
directories which located in the test/ directory but are not tests.
Moreover some (probably buggy) tests do create files in the the test/
directory which may be left behind in case of failure. This makes the
basic test fail.
The patch changes the test to look only for regular executable files.
This makes the exception list much smaller. And since no tests should
create executables in the test/ directory (if there are, they should
be fixed), the basic test should not be affected by failed or
interrupted tests.
The error is easy to miss, because the test passes and stderr is not
printed. But if you run basic tests in verbose mode (./basic
--verbose), you get:
sed: can't read notmuch-test: No such file or directory
The issue is that sed command is given two files: notmuch-test and
$TEST_DIRECTORY/notmuch-test. And there is no notmuch-test file in
the current directory (test/tmp.basic/). The patch just removes the
non-existing file from the sed command.
Previous behaviour was to indent messages in a thread according
to depth by one space per level. This commit tests if setting
notmuch-indent-messages-width to `4' provides a message thread
with four spaces of indentation thread depth.
Previous behaviour was to indent messages in a thread according
to depth by one space per level. In
id:1311028119-50637-1-git-send-email-fgeller@gmail.com Felix
Geller proposed a patch in order to turn indentation off. This
commit tests if instead setting notmuch-indent-messages-width to
`0' does turn off indentation.
Previous behaviour was to indent messages in a thread according
to depth by one space per level. This is still the case with
notmuch-indent-messages-width default value `1'. This test
succeeds if output with default value is same as in "Basic
notmuch-show view in emacs".
Some tests don't break when HUP signal is sent tho those (by
pressing ctrl-c on the terminal). Therefore, the top-level
test script catches the HUP and sends TERM signal to the
started test script.
If mail sending from emacs fails before it has chance to connect
to the smtp-dummy mail server, the opportunistic QUIT message
sending makes smtp-dummy to exit.
Due to 108-character limit in unix domain socket path this change
is required; it is more probable that length of ${TMPDIR:-/tmp} is
shorter than length of path to the current directory of notmuch test
source directory. One can expect to create reasonable-length unix
domain sockets wherever $TMPDIR points to.
The TEST_TMPDIR if first needed to hold dtach's socket (due
to 108-character limit in socket file names). Later it can be
used to hold other temporary files; directory deleted at exit.
Do not redirect test_emacs stderr to /dev/null. Test_emacs uses
emacsclient(1) now and it does not print unwanted messages (like
those from `message') to stderr. But it does print useful
errors, e.g. when emacs server connection fails, given expression
is not valid or undefined function is called.
It is very convenient when C-e (bound to `widget-end-of-line') ignores
trailing spaces inside the search widget. But it only does so if a
widget is not followed by a newline (that is why it works in the saved
search widgets). The patch just adds an invisible space after the
search widget to get the desirable behavior of `widget-end-of-line'.
The extra space is also added to expected results of emacs tests.
Use `previous-single-char-property-change' instead of going
through each character by hand and testing it's visibility. This
fixes `notmuch-show-advance-and-archive' to work for the last
message in thread with hidden signature.
Set SCREENRC and SYSSCREENRC environment variables to "/dev/null"
as suggested by Jim Paris to avoid potential problems with
screen(1) configuration files.
Before the change, emacs run in daemon mode without any visible
buffers. Turns out that this affects emacs behavior in some
cases. In particular, `window-end' function returns `point-max'
instead of the last visible position. That makes it hard or
impossible to implement some tests. The patch runs emacs in a
detached screen(1) session. So that it works exactly as if it
has a visible window.
Note: screen terminates when emacs exits. So the patch does not
introduce new "running processes left behind" issues.
Modify command line argument handling to take a --accumulate flag.
Test for extra arguments beyond the input file.
The --accumulate switch causes the union of the existing and new tags to be
applied, instead of replacing each message's tags as they are read in from the
dump file.
Based on a patch by Thomas Schwinge:
id:"1317317857-29636-1-git-send-email-thomas@schwinge.name"
Flesh out what ``notmuch restore --accumulate'' is supposed to do.
Its tests are currently XFAILed; the functionality will be added in
future patch(es).
Based on a patch by Thomas Schwinge:
id:"1317317811-29540-1-git-send-email-thomas@schwinge.name"
Thanks to Thomas Schwinge for noticing yet another place where quoting
matters. Since the shell translates \. to ., the regex passed to grep
is too generous without the quotes.
The use of [.] is the suggestion of Tomi Ollila.
Several new tests are added, and existing use of test_begin_subtest is
replaced by test_expect_success to catch failing commands in cases where
we execute more than one command.
Based on changes in
id:"1317317811-29540-1-git-send-email-thomas@schwinge.name"
- explain test_expect_equal_file
- remove mention of test_expect_failure, since that function was removed.
Based on id:"1317317811-29540-1-git-send-email-thomas@schwinge.name"
We print an intentionally non-specific message on stderr, since it
isn't clear if there will be some global output file argument to
replace.
We update the test suite atomically, since it relies on having the
same text in two files.
The main motivation here is allow the fast dumping of tag data for
messages having certain tags. In practice it seems too slow to pipe
dump to grep.
All dump-restore tests should be working now, so we update test/dump-restore
accordingly
The idea here is that we want to deprecate the use of arguments to
dump and restore to specify paths, since in particular we want to use
the non-option arguments to dump to form a query.
The first test tests that the notmuch-show-refresh-view function
produces the exact same output for an unmodified show buffer. This
test should pass since the relevant functionality has already been
applied.
The second test tests show refresh for a show buffer that has been
modified by navigation and message visibility toggling. Ideally
refresh-view should preserve this state of the notmuch-show buffer.
Unfortunately it currently does not, so this test is know to be broken
and is marked as such.
There's no reason to output "Non-text part:" lines for parts that are
not leaf nodes, eg. multipart/* and message/rfc822. We fix the text
here to test for their absence. The next patch will fix reply
accordingly.
The setup is useless if gdb is not present, so it doesn't hurt to skip
it. The diff here is huge, but the commit is really just moving most
of the script inside the initial if, and adding an else block to print
a warning.
This addresses atomicity of tag synchronization, the last atomicity
problems in notmuch new. Each message add or remove is wrapped in its
own atomic section, so interrupting notmuch new doesn't lose progress.
This tests notmuch new's ability to recover from arbitrary stopping
failures. It interrupts notmuch new after every database commit and,
on every resulting database snapshot, re-runs notmuch new to
completion and checks that the final database state is invariant.
This means that test_subtest_known_broken needs to be called before
every known broken subtest, which is no different than what is
documented for the test_begin_subtest case.
The assumption is that every test ends up calling either skipping,
calling test_ok_ or test_failure_ and and the latter in turn delegate
to the known_broken versions in the case where
test_subtest_known_broken_ is set.
Human-friendly scenario:
* open a thread where a message which ends with an HTML part is
followed by another message
* make the first message visible
* goto the beginning of the second message (first line, first colon)
* hit "RET"
Result: nothing happens except for "No URL at point" message
Expected result: the second message is shown/hidden
The root cause is that the HTML part has `keymap' text property set.
In particular, "RET" is bound to visit a URL at point. The problem is
that `keymap' property affects the next character following the region
it is set to (see elisp manual [1]). Hence, the first character of
the next message has a keymap inherited from the HTML part.
[1] http://www.gnu.org/software/emacs/elisp/html_node/Special-Properties.html
There is existing support for broken tests. But it is not convenient
to use. The primary issue is that we have to maintain a set of
test_expect_*_failure functions which are equivalent to the normal
test_expect_* counterparts except for what functions are called for
result reporting. The patch adds test_subtest_known_broken function
which marks a subset as broken, making the normal test_expect_*
functions behave as test_expect_*_failure. All test_expect_*_failure
functions are removed. Test_known_broken_failure_ is changed to
format details the same way as test_failure_ does.
Another benefit of this change is that the diff when a broken test is
fixed would be small and nice.
Documentation is updated accordingly.
Update test_emacs documentation in test/README according to the latest
changes in emacs tests. Move the note regarding setting variables
from test/emacs to test/README.
The main goal of this overhaul is to define how message/rfc822 parts
should be handled. message/rfc822 parts should be output in a similar
fashion to the outer message, including some subset of the rfc822
headers. The following decisions about formatting of message/rfc822
parts were made:
The format and content of message/rfc822 parts shall be as similar as
possible to that of full messages. In particular, for formatted
outputs, the "content" of rfc822 part output should include "headers"
and "body" fields).
The "body" field shall include the body of the message.
The "headers" field shall include the following headers, since these
are the ones available from the GMimeMessage:
"From"
"To"
"Cc"
"Subject"
"Date"
However, for the case of --format=raw the raw rfc822 should be output,
including all headers.
A subset of relevant headers shall be output in reply.
The test embedded rfc822 message is also modified to be itself
multipart, so we can more fully test how all sub parts of the message
part are output.
Note added by Committer:
Currently, expect one test (--format=raw --part=3, rfc822 part) to fail.
The test message date, "Tue, 05 Jan 2001 15:43:57 -0000", is not
actually a real date. 05 Jan 2001 was in fact a Friday, not a
Tuesday. Date parsers (such as "date" in coreutils) will return "Fri"
as the day for this string, even if "Tue" is specified.
Also, the time zone "-0000" is actually always returned as "+0000", so
we change that here was well.
This will be relevant for later patches when we begin parsing rfc822
part headers, where gmime returns a parsed date string.
If we do want to test date parsing, we should do that in a separate
test.
There were two "--format=text --part=0" tests. One of them was
supposed to be a test for "--format=text --part=1".
There were also two errant "test_expect_equal_file OUTPUT EXPECTED"
lines, that are removed here.
The feature to show subject changes in the collapsed thread view was
originally added (8ab433607) with an option
(notmuch-show-always-show-subject) to display the subject
for all messages, even when there was no change.
The subsequent commit (4f04d273) changed the sense of the test (or to
and) and the name of the controlling variable
(notmuch-show-elide-same-subject).
But this commit is broken in a few ways:
1. The original definition of notmuch-show-always-show-subject was
left around
But the variable isn't actually used in the code at all, so it
just adds clutter and confusion to the customization interface.
2. The name and description of the controlling variable doesn't
match the implementation
The name suggests that setting the variable to t will cause
repeated subjects to be elided, (suggesting that when it is nil
all subjects will be shown).
However, when the variable is nil, no subjects are shown. So a
correct name for the variable in this sense would be
notmuch-show-subject-changes.
Showing subject changes is a useful feature, and should be on by
default. (We don't want to bury generally useful features behind
customizations that users have to find).
Rather than fixing the name of the variable and changing its default
value, here we remove the condition entirely, such that the feature is
enabled unconditionally.
So both the currently-used variable and the stale definition of the
formerly-used are removed.
Also, the one relevant test-suite result is updated, (showing the
intial subject of a collapsed thread, and no subject display for later
messages that do not change the subject).
eb4cf465 introduces changes which weren't part of the submitted
patch (id:"87liwlip2j.fsf@gmail.com"), presumably made during
resolving merge conflicts.
The first one causes the title of a test to be printed a second time,
in place of the correct title:
PASS Message with .. in Message-Id:
PASS Message with .. in Message-Id:
instead of:
PASS Message with .. in Message-Id:
PASS Sending a message via (fake) SMTP
The second one is simply the insertion of a line break, so no harm there.
This commit reverts both changes, as they were clearly accidental.
Signed-off-by: Pieter Praet <pieter@praet.org>
The sleep was to force the directory's mtime to advance between the
previous notmuch new and the subsequent rm;notmuch new.
The current convention is to use the existing increment_mtime function
for this purpose, (which avoids the test suite being slowed down by
calls to sleep).
Thanks to Austin Clements for noticing this undesired sleep.
Test for bug. Current stemming support for notmuch adds extra terms
to the DB which aren't removed when the file renames are detected.
When folder tags are added to a message, Xapian terms for both XFOLDER
and ZXFOLDER are generated. When one of the filenames are
renamed/removed, only the XFOLDER tags are removed, leaving it possible
for a match on a folder: tag that was previously but is no longer a
match in the maildir.
Before the change, every Emacs test ran in a separate Emacs
instance. Starting Emacs many times wastes considerable time and
it gets worse as the test suite grows. The patch solves this by
using a single Emacs server and emacsclient(1) to run multiple
tests. Emacs server is started on the first test_emacs call and
stopped when test_done is called. We take care not to leave
orphan Emacs processes behind when test is terminated by whatever
reason: Emacs server runs a watchdog that periodically checks
that the test is still running.
Some tests need to provide user input. Before the change, this
was done using echo(1) to Emacs stdin. This no longer works and
instead `standard-input' variable is set accordingly to make
`read' return the appropriate string.
Without this, mail messages delivered by emacs_deliver_message might
not be seen by the next invocation of "notmuch new", (which can lead
to test-suite failures if emacs_deliver_message is fast enough).
Change add_email_corpus, emacs_deliver_message and tests to use
$TEST_DIRECTORY instead of '..'.
This improves the behavior of the usage of --root=<dir>, as the
assumption of what '..' means will usually be incorrect.
Document -root option in README and update valgrind to work with
-root.
Instead of generating auxiliary run_emacs script every time
test_emacs is run, do it once in the beginning of the test.
Also, use absolute paths in the script to make it more robust.
Using `setq' for setting variables in Emacs tests affect other
tests that may run in the same Emacs environment. Currently it
works because each test is run in a separate Emacs instance. But
in the future multiple tests will run in a single Emacs instance.
The patch changes all variables to use `let', so the scope of the
change is limited to a single test.
Few Emacs tests used sed(1) to remove unexpected output in the
beginning to avoid getting confused by messages such as "Parsing
/home/cworth/.mailrc... done". This is no longer needed since
tests are run in a temporary home directory instead of the user's
one. So remove these sed(1) calls.
Before the change, the common Emacs test scheme was to print
buffer content to stdout and redirect it to a file or capture it
in a shell variable. This does not work if we switch to using
emacsclient(1) for running the tests, because you can not print
to the stdout in this case. (Actually, you can print to stdout
from Emacs server, but you can not capture the output on
emacsclient(1)).
The patch introduces new Emacs test auxiliary functions:
`test-output' and `test-visible-output'. These functions are
used to save buffer content to a file directly from Emacs. For
most tests the changes are trivial, because Emacs stdout output
was redirected to a file anyway. But some tests captured the
output in a shell variable and compare it with the expected
output using test_expect_equal. These tests are changed to use
files and test_expect_equal_file instead.
Note: even if we do not switch Emacs tests to emacsclient(1), the
patch makes tests cleaner and is an improvement.
Most test_emacs calls have long arguments that consist of many
expressions. Putting them on a single line makes it hard to read
and produces poor diff when they are changed. The patch puts
every expression in test_emacs calls on a separate line.
Few Emacs tests had test_expect_equal_file arguments in the wrong
order: the first argument should be the test output and the
second one should be the expected.
Update the test mail corpus to have two files with the same content to
expose the bug where a single message with multiple filenames only
reports a single filename.
Update expected results for search --output=files to match new
behavior for multiple files corresponding to a single message
Signed-off-by: Mark Anderson <ma.skies@gmail.com>
Various typo fixes in some test-case data.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
test-case data.
Various typo fixes in documentation within the code that can be made
available to the user, (emacs function help strings, "notmuch help"
output, notmuch man page, etc.).
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
documentation and fixed fix of "comman" to "common" rather than
"command".
Various typo fixes in comments within the source code.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just
source-code comments, (and fixed fix of "descriptios" to "descriptors"
rather than "descriptions").
Various typo fixes in comments within the Makefile and other build scripts.
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just build files.
Various typo fixes in auxiliary text files included with the source,
(README, TODO, etc.).
Signed-off-by: Pieter Praet <pieter@praet.org>
Edited-by: Carl Worth <cworth@cworth.org> Restricted to just text files.
We exercise each of the documented values (nil, a string, and a
list). For the list, we test matching a specific entry, matching a
catch-all regular expression, and no match at all (in which case there
is no FCC set).
The worry here is that a binary linking with libnotmuch might lose
access to Xapian::Error symbols because libnotmuch hides them.
We are careful here to create ./fakedb/.notmuch in order to trigger a
Xapian exception, and not just a missing file check.
Thanks to jrollins and amddragon for suggestions.
(cherry picked from commit 66f37f5f6864a988f94ddb893e3a176af57f6c8e)
The main() function should be written as just another function with a
return value. This allows for more reliable code reuse. Imagine that
main() grows too large and needs to be factored into multiple
functions. At that point, exit() is probably the wrong thing, yet can
also be hard to notice as it's in less-frequently-tested exceptional
cases.
Each top level test (basic, corpus, etc...) is run with a fixed
timeout of 2 minutes.
The goal here is to treat a hung test as a failure. The emacs test for
sending mail is known to be problematic on the Debian
autobuilders. This is both a bandaid fix for that, and a sensible long
term feature.
(cherry picked from commit 5f99c80e02736c90495558d9b88008a768876b29)
The intent was always to make these Received headers span multiple
lines. But the escapes were causing the shell to ignore the newlines,
so that the result instead was long Received headers on a single line
each.
Fixing the intent here doesn't actually change the test-suite results
at all.
This is much more realistic, as most messages in the wild will have multiple
Received headers. Also, this demonstrates a current bug in the Received
header parsing, (multiple Received headers are not properly concatenated
depending on the order in which headers are parsed in a message).
This tests the recently-added detection/hiding of top-posted quotations and
in the testing, it takes advantage of the less-recently-added
visible-buffer-string function for emitting only the visible text
from a buffer.
Again, this is a much cleaner and more thorough test, and in fact
exposes a bug in the format=text output, that will be fixed the next
commit. Because of this, some of the multipart tests currently fail.
This is a much cleaner way to do the emacs tests, since we're actually
comparing output against existing files with expected output. We also
won't miss any trailing newlines this way.
And speaking of which, one of the expected output files was actually
missing a trailing blank line that was actually in one of the original
messages, so this was fixed.
This feature was recently added, so it of course needs a test now.
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
Edited-by: Carl Worth <cworth@cworth.org> Fixed test to use
notmuch_search_sanitize in order to be robust against unpredictable
thread ID numbers, (due to unpredictable order in which the filesystem
presents files).
In the master branch in test/emacs two tests access the build users home
directory, so does emacs_deliver_message in the crypto branch.
The tests should not touch the build user's home directory. The patch
creates a directory in the temporary test directory and sets home
accordingly.
In case of a non-existent home directory, the tests are failing without
this patch.
Signed-off-by: Jameson Graef Rollins <jrollins@finestructure.net>
This test doesn't have anything to do with json, and has everything to
do with testing search capability, so I'm not sure why it was in the
wrong place.
The "Search for non-existent message prints nothing" test fits better
with the existing tests in search-output, so move it there. Also add a
similar test for the --format=json case.
These tests also use the new test_expect_equal_file function, (to ensure
that the presence of a trailing newline is correctly tested).
These test now properly test for the presence of a newline at the end
of all output. Right now some of these test will fail because the
search output is currently broken to *not* produce proper newlines in
some cases.
Since commit 2f8871df6e notmuch has been
using a function (show_part_content) originally written only for text
parts to save all MIME parts. The problem with this is that this
function converts CRLF pairs to LF only and optionally converts to
UTF-8 encoding. These two conversions have the potential to corrupt
binary data when passed through the function.
This test demonstrates that corruption, and so fails currently, until
we fix the bug.
Not that it affects the correctness of the test, but it's nice to use
proper spelling. This kind of change could invalidate a signature on the
test message, but I think that would have happened previously when the
HTML part was added in the first place.
Use .gz filenames for saved attachments in the tests to check
that Emacs does not re-compress the file.
Use test_expect_equal_file instead of test_expect_equal to avoid
binary output on the console.
Before the change, test_expect_equal_file moved files it compared
in case of failure. The patch changes it to copy the files
instead. This allows testing non-temporary files which are
stored in git.
Note: the change should not result in new temporary files left
after the tests. Test_expect_equal_file used to move files only
on failure, so callers had to cleanup them anyway.
The primary goal here is to keep the decrypted output as similarly
structured as undecrypted output as possible. Now, when decrypting
parts, only the original encrypted part is replaced by the it's
decrypted content. If this part isn't itself a multipart, then all
part numbering should remain consistent during decryption.
The only draw back here is that the useless application/pgp-encrypted
sub-part of the multipart/encrypted part is also emitted. But this
part can be easily ignored by clients.
Some folks have complained about the part renumbering that occurs when
the entire multipart/signed part is replaced with the part contents
after verification. This is primarily because it incurs an additional
computational cost to retrieve individual parts, since verification
has to be performed again to ensure that part numbering is consistent.
This patch simply leaves the full multipart/signed part as is.
The emacs crypto test is also updated to reflect this change.
This patch adds the tag "signed" to messages with any multipart/signed
parts, and the tag "encrypted" to messages with any
multipart/encrypted parts. This only occurs when messages are indexed
during notmuch new, so a database rebuild is required to have old
messages tagged.
This adds a new "crypto" test script to the test suite to test
PGP/MIME signature verification and message decryption. Included here
is a test GNUPGHOME with a test secret key (passwordless), and test
for:
* signing/verification
* signing/verification with full owner trust
* verification with signer key unavailable
* encryption/decryption
* decryption failure with missing key
* encryption/decryption + signing/verfifying
* reply to encrypted message
* verification of signature from revoked key
These tests are not expected to pass now, but will as crypto
functionality is included.
We need to be able to test for the presence of a newline at the end of
output. There's no good way to capture trailing newlines in bash, so
redirecting output to a file is the next best thing. This new
function should be used when testing for output that is expected to
have trailing newlines.
The next commit will demonstrate the use of this.
The patch replaces all (message (buffer-string)) calls in emacs
tests with (princ (buffer-string)). This avoids accidentally
interpreting '%' as format specifiers and makes code simpler
because we do not need to capture stderr.
Also, the patch works around an Emacs (23.3+1-1 on current Debian
Unstable) segfault in "Ensure that emacs doesn't drop results"
test. Note: the segfault does not happen on every test run.
Though, it seems to be consistently reproducible if the test uses
300 messages instead of 30. Hopefully, it is the crash described
in Emacs bug #8545 [1] which is already fixed.
[1] http://debbugs.gnu.org/cgi/bugreport.cgi?bug=8545
Change #!/bin/bash at start of tests to "#!/usr/bin/env bash". That way
systems running on bash < 4 can prepend bash >= 4 to path before
running the tests.
The patch adds test-lib.el file for Emacs tests auxiliary stuff.
Currently, it implements two functions: `visible-buffer-string'
and `visible-buffer-substring'. These are similar to standard
counterparts without "visible-" prefix but exclude invisible
text. The functions are not used anywhere at the moment but
should be useful for testing hiding/showing in the Emacs
interface.
Edited-by: Carl Worth <cworth@cworth.org> Fixed "basic" test to ignore
new test-lib.el file.
The example multipart message is made a bit more complicated by adding
a message/rfc822 message, and the all parts are output and tested in
all output formats.
Remove double quotes and flatten "foo@bar.com <foo@bar.com>" to
"foo@bar.com".
Edited-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net> (clean up
expected output for emacs tests).
Signed-off-by: Jameson Rollins <jrollins@finestructure.net>
The compilation of the smtp-dummy program would fail if a build was
attempted on a system without getline. Fix this by simply including
the existing notmuch_compat_srcs variable when constructing the list
of source files for compiling smtp-dummy.
Previously, notmuch show flattened all output, losing information
about the nesting of the MIME hierarchy. Now, the output is properly
nested, (both in the --format=text and --format=json output), so that
clients can analyze the original MIME structure.
Internally, this required splitting the final closing delimiter out of
the various show_part functions and putting it into a new
show_part_end function instead. Also, the show_part function now
accepts a new "first" argument that is set not only for the first MIME
part of a message, but also for each first MIME part within a series
of multipart parts. This "first" argument controls the omission of a
preceding comma when printing a part (for json).
Many thanks to David Edmondson <dme@dme.org> for originally
identifying the lack of nesting in the json output and submitting an
early implementation of this feature. Thanks as well to Jameson Graef
Rollins <jrollins@finestructure.net> for carefully shepherding David's
patches through a remarkably long review process, patiently explaining
them, and providing a cleaned up series that led to this final
implementation. Jameson also provided the new emacs code here.
Previously, the outer multipart part of any multipart/mixed,
multipart/signed, etc. MIME message was silently omitted from the
"notmuch show" output. This prevented any client from correctly
determining to which parts a signature applies, for example.
Now, we actually emit these parts as their own parts. The output is
still flattened---the contained parts are not yet included "within"
the multipart part---so it's still not possible to determine to which
parts a signature applies, but this is one step along the path.
The test suite is updated to reflect this change, (though we'll
eventually want to fix the emacs interface to not display buttons for
the multipart enclosure parts as there's nothing useful for the user
to actually do with them).
This tests "notmuch show" with both --format=text and --format=json on
a message with some non-trivial MIME multipart nesting, (multiple parts
within a multipart/mixed part which is within a multipart/signed part).
The test captures the current behavior (where only the leaf nodes of
the MIME structure are emitted as a flat list---the multipart parts
are effectively ignored). We plan to soon change the json output at
least to emit an actual hierarchy matching the MIME structure, (at
which point we will update this test).
Theses were expected failures only due to a bug in GMime (with
versions of GMime before 2.4.18). As of GMime version 2.4.18 this bug
is fixed and these tests now pass.
With the previous commit, unexpected output before or between search results
would be displayed. However, trailing junk from the "notmuch search" output
would still be silently swallowed.
The most common case for an error message from "notmuch search" would be
an invalid command-line, and in that case, there would be no search results
and the trailing error message would get swallowed.
We fix the process sentinel to check for leftover data and add it to the
final buffer. We also add a test case to ensure this works.
Rather than silently swallowing unexpected output, the emacs interface will now
display it. This will allow error messages to actually arrive at the emacs
interface (though not in an especially pretty way). This also allows for easier
investigation of the inadvertent swallowing of search results that span page
boundaries (as demonstrated by the recent added emacs-large-search-buffer test).
The page-boundary bug has been present since a commit from 2009-11-24:
93af7b5745
Many thanks to Thomas Schwinge for tracking that bug down and
contributing the test for it.
The new name is more descriptive of the bug being tested. Also, the test
is rewritten slightly so that it's much more plain to see how the bug
manifests itself, (that messages are droped from the emacs result at
regular intervals). Primarily, this is by collapsing the large blobs
used to inflate the message subjects.
In the original json code, search matching nothing would return a
valid, empty json array (that is, "[]"). I broke this in commit
6dcb7592e3 when adding support for
--output=threads|messages|tags. This time, while fixing the bug also
add a test to the test suite to help avoid future regressions.
Now that we understand the bug here, we rename this test to
search-insufficient-from-quoting to clarify the bug being exercised,
(which occurs when the From: line contains an unquoted '.' character).
We also mark these tests as expected failures until the bug gets fixed.
Currently, there are two places in the test framework that contain very
long list on a single line. Whenever a test is added (or changed) in
several branches and these branches are merged, it results in conflict
which is hard to resolve because one has to go through the whole long
line to find where the conflict is.
This patch splits these long lists to several lines so that the
conflicts are easier to resolve.
Currently, whenever we call index_terms multiple times for a single
field, the term generator is being reset to position 0 each time. This
means that with text such as:
To: a@b.c, x@y.z
one can get a bogus match by searching for:
To: a@y.c
Thanks to Mark Anderson for reporting the bug, (and providing a nice,
minimal test case that inspired what is used here).
This is a new feature which is not implemente yet, so these tests mostly
fail currently. A subsequent commit will add the feature and cause these
tests to start passing.
These tests verify that we can search for containing folders of mail files
by word or by phrase and that the search terms are updated correctly when
directories are renamed.
This reverts commit f22a7ec1e2.
Interrupting the test suite due to an actual bug in a test script
would be just fine, but interrupting the run of the entire test suite
at the first test failure is unacceptable.
Previously, this directory was only preserved for failing tests. But
it's important to be able to easily debug known-broken tests, so
preserve the actual vs. expected output for those as well.
Use varying dates in the test messages to test the order authors are
listed in. Add tests with repeated author names and unusual date
ordering. Most of these are broken at the moment, but will be fixed
shortly.
Edited-by: Carl Worth <cworth@cworth.org>: Also update the expected
results for existing emacs tests that currently codify the incorrect
author ordering, (and similarly note them as broken in the current
test suite).
Incremental search does not match strings that span a
visible/invisible boundary. This results in failure to correctly
isearch for authors in `notmuch-search' mode if the name of the author
is split between the visible and invisible components of the authors
string. To avoid this, attempt to truncate the visible component of
the authors string on a boundary between authors, such that the
entirety of an author's name is either visible or invisible.
When a test fails, a tmp.<testname> file is left behind. These files
are useful for the person debugging the test failure, but are never
anything we want to commit.
Edited-by: Carl Worth <cworth@cworth.org>: Changed from tmp.emacs to
tmp.* and added explanation in the commit message.
This testing *does* capture the bug of missing '[' and ']' characters
int "notmuch search --output=tags" case. This is another manifestation
of the same bug causing the missing final newline (as mentioned in the
previous commit).
This code simply wasn't being exercised by the test suite before, so
this will be useful.
Meanwhile, there's currently a bug in "notmuch search --output=tags"
in that it doesn't print a final newline. But the current test suite
isn't able to catch this bug since the $() construct of the shell
doesn't preserve the distinction of whether the final newline is
present or not.
This test script does some initial test setup (generating a few
messages), which is all well and good, but we don't need to print that
as a test result---particularly since the test result was effectively
hard-coded to always pass.
When test_begin_subtest is not followed by corresponding test_expect_equal,
the output of the rest of the test script is errornously suppressed. Add
code to detect these bugs in test scripts.
Break notmuch-test whenever a test script returns non-zero status.
This happens either when some test from the script fails or when there
is an error in the script.
This is especially useful in the latter case since the error may not
appear in the final aggregated results.
The newline was removed from say_color in commit 222926ab to allow
printing test status in the beginning of the line. Error messages are
never followed by other text so we add the newline to error function.
Git-style tests (test_expect_success etc.) suppress stdout and stderr
unless -v is given. Notmuch-style tests (created by test_begin_subtest
and test_expect_equal) do not have this behavior so implement it the
same.
Additionally, for both test styles, the test-lib.sh is changed so that
the content of suppressed stdout and stderr is shown in case of failed
test.
Finally a test for this functionality is added to basic tests.
This is to prevent notmuch from destroying any information the user
has encoded as flags in the maildir filename. Tests are also added to
the test suite to verify the documented behavior.
Some people use notmuch with non-maildir files, (for example, email
messages in MH format, or else cool things like using sluk[*] to suck
down feeds into a format that notmuch can index).
To better support uses like that, don't do any renaming for files that
are not in a directory named either "new" or "cur".
[*] https://github.com/krl/sluk/
The FCC code saves a message in maildir format, and sets the S flag by
default, so now, automatically, FCC messages will not show up as
"unread", (which seems natural enough).
There's nothing in the current API documentation that would suggest
the behavior being tested here. Attempt to implement this could have
some nasty side effects, (such as notmuch_message_maildir_flags_to_tags
implicitly calling notmuch_message_tags_to_maildir_flags and maybe
even opening up some bad looping possibilities).
Much better to stick with what we have documented, which we believe will
actually be useful, (and easy enough to comprehend).
These needed to be changed to be brought up to the current state of
the maildir-sync tests. This includes style changes, but also the
elimination of any assumption about pre-existing message filenames,
(such as msg-003) which actually don't exist anymore.
Also, the known broken tests are changed to emit FAIL rather than
BROKEN simply to make them easier to fix, (so that they print the
current problems rather than hiding them).
Finally, an additional test is added to ensure that when a duplicate
file is added without flags, it doesn't invalidate flags from other
duplicates, (instead the flags are effectively merged).
Add maildir synchronization tests for multiple messages with the same
message-id. As this is not yet implemented in notmuch, some of these
teste are marked as BROKEN.
I use $(< ) operator to avoid fiddling with stripped trailing newlines
from test results which happens when output+=$(command) is used.
This change reworks these tests in several ways:
1. Bring tests into "new" test style preferring test_expect_equal over
test_expect_success in almost all cases.
2. Don't emit test results for intermediate items not actually being
tested, (things like "no new messages", "search for message",
etc.). Those things are already covered by existing tests such as
"basic" or "search" and only serve to obscure what's actually being
tested.
3. Change sense of the test showing failure to rename a file from
"new" to "cur" when "cur" doesn't exist.
In this case, notmuch should detect that this is not a maildir and
should not attempt to do any renaming of the file.
4. Extend dump/restore test to also exercise addition of tag, not just
removal.
Both items #3 and #4 above show shortcomings in the current
implementation. These are currently resulting in test results of FAIL
and indicate bugs that need to be fixed.
