Jesse Hills
4e10881331
Log the actual value in modbus number ( #2901 )
2021-12-13 10:28:19 +13:00
Ben Owen
cec4a81e14
Add reset_duration option for waveshare epaper HAT rev 2.1 ( #1481 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-13 10:27:11 +13:00
Carlos Garcia Saura
da45923d05
Turn verbose a debug statement in bme280 ( #2906 )
2021-12-13 09:32:37 +13:00
Carlos Garcia Saura
31a61b598b
Reduce timing noise in duty_cycle ( #2881 )
2021-12-13 09:30:47 +13:00
tony
9c0506592b
Add light.on_state trigger ( #2868 )
2021-12-13 09:19:57 +13:00
Oxan van Leeuwen
beeb0c7c5a
Introduce hex parsing & formatting helper functions ( #2882 )
2021-12-13 09:15:23 +13:00
Martin
b2f05faee0
Move i2c scan to setup ( #2869 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-13 09:12:50 +13:00
Jesse Hills
8c9e0e552d
Bump version to 2021.12.0
2021-12-12 07:10:51 +13:00
Jesse Hills
08057720b8
Bump version to 2021.12.0b6
2021-12-11 21:07:07 +13:00
Keith Burzinski
d504daef91
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 21:07:07 +13:00
Keith Burzinski
cf5193d3e5
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 20:03:22 +13:00
Jesse Hills
3bf6320030
Bump version to 2021.12.0b5
2021-12-10 09:55:48 +13:00
Guillermo Ruffino
708b928c73
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:55:48 +13:00
Jesse Hills
649366ff44
Fix published state for modbus number ( #2894 )
2021-12-10 09:55:47 +13:00
Guillermo Ruffino
c490388e80
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:44:43 +13:00
Jesse Hills
24ec5a6e9d
Fix published state for modbus number ( #2894 )
2021-12-10 09:32:34 +13:00
Jesse Hills
f3d9d707b6
Bump version to 2021.12.0b4
2021-12-08 12:58:14 +13:00
Jesse Hills
fbc84861c7
Use new platform component config blocks for wizard ( #2885 )
2021-12-08 12:58:14 +13:00
Carlos Garcia Saura
e763469af8
Feed watchdog while setting up OTA ( #2876 )
2021-12-08 12:58:14 +13:00
Oxan van Leeuwen
6df1d5222d
Drop unused xSemaphoreWait define ( #2888 )
2021-12-08 12:46:36 +13:00
Jesse Hills
3d51ac8df0
Use new platform component config blocks for wizard ( #2885 )
2021-12-08 09:22:03 +13:00
Oxan van Leeuwen
6fe4ff7f85
Drop len parameter from parse_number() ( #2883 )
2021-12-08 08:46:25 +13:00
Yuval Brik
2253d4bc16
Support different run duration for non-timer wakeup ( #2861 )
2021-12-06 23:30:27 +01:00
Carlos Garcia Saura
e5cc19de43
Feed watchdog while setting up OTA ( #2876 )
2021-12-06 23:26:06 +01:00
Jesse Hills
ed5e2dd332
Bump version to 2021.12.0b3
2021-12-07 07:47:48 +13:00
Oxan van Leeuwen
df315a1f51
Feed watchdog when no component loops ( #2857 )
2021-12-07 07:47:48 +13:00
Jesse Hills
7ee4bb621c
Allow wizard to specify secrets ( #2875 )
2021-12-07 07:47:48 +13:00
Jesse Hills
24874f4c3c
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-07 07:47:48 +13:00
Jesse Hills
c128880033
Add endpoint to fetch secrets keys ( #2873 )
2021-12-07 07:47:48 +13:00
Massimiliano Ravelli
a66e94a0b0
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-07 07:47:48 +13:00
Oxan van Leeuwen
56870ed4a8
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-07 07:47:48 +13:00
Martin
3ac720df47
SPS30 : fix i2c read size ( #2866 )
2021-12-07 07:47:48 +13:00
Carlos Garcia Saura
1bc757ad06
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-07 07:47:48 +13:00
Martin
f72abc6f3d
tlc59208f : fix compilation error ( #2867 )
2021-12-07 07:47:48 +13:00
Oxan van Leeuwen
12467a18e6
Feed watchdog when no component loops ( #2857 )
2021-12-07 07:24:20 +13:00
Jesse Hills
1db7043a4d
Allow wizard to specify secrets ( #2875 )
2021-12-06 20:58:51 +13:00
Jesse Hills
49932747b3
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-06 20:57:56 +13:00
Jesse Hills
55db190875
Add endpoint to fetch secrets keys ( #2873 )
2021-12-06 20:15:34 +13:00
Massimiliano Ravelli
71fe2f7ed3
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-06 20:01:50 +13:00
Oxan van Leeuwen
ffc112c9d0
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-06 20:01:14 +13:00
Oxan van Leeuwen
d3e48e296f
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-06 19:59:50 +13:00
Martin
14f6ae75ea
SPS30 : fix i2c read size ( #2866 )
2021-12-06 19:58:26 +13:00
Carlos Garcia Saura
c84efe64d3
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-06 19:56:53 +13:00
Martin
10e89a7dbb
tlc59208f : fix compilation error ( #2867 )
2021-12-06 19:54:46 +13:00
Jesse Hills
329bf861d6
Bump version to 2021.12.0b2
2021-12-03 07:54:34 +13:00
Oxan van Leeuwen
9dcd3d18a0
Update ota_component.cpp ( #2852 )
2021-12-03 07:54:34 +13:00
Oxan van Leeuwen
40c017fd54
Update ota_component.cpp ( #2852 )
2021-12-03 07:52:56 +13:00
Jesse Hills
f0bcf81a98
Add a simple helper to remap values ( #2850 )
2021-12-02 09:23:11 +01:00
Jesse Hills
86c205fe43
Remove blank line
2021-12-02 21:08:11 +13:00
Jesse Hills
6a0b343289
Bump version to 2022.1.0-dev
2021-12-02 19:38:49 +13:00
Jesse Hills
c6414138c7
Bump version to 2021.12.0b1
2021-12-02 19:38:49 +13:00
Jesse Hills
36b355eb82
Merge branch 'dev' into bump-2021.12.0b1
2021-12-02 19:38:44 +13:00
Martin
9ca4e8f32a
modbus_controller: bugfix: enable overriding calculated register size ( #2845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-02 15:45:11 +13:00
Alexandre-Jacques St-Jacques
1b88b7a166
Fix wifi not working with manual_ip using esp-idf ( #2849 )
2021-12-02 15:33:48 +13:00
Paul Nicholls
caf352ff06
Tuya Cover improvements ( #2637 )
2021-12-02 15:26:56 +13:00
Oxan van Leeuwen
54106179a1
Set ESP32 watchdog to loop task ( #2846 )
2021-12-02 09:05:42 +13:00
Oxan van Leeuwen
607601b3a4
Enable a bunch of clang-tidy checks ( #2149 )
2021-12-02 09:03:51 +13:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Oxan van Leeuwen
fbe1bca1b9
Fix compilation using subprocesses ( #2834 )
2021-12-01 17:37:24 +01:00
Mark Dietzer
24a5325db3
Declare arch_get_cpu_cycle_count for esp8266 as IRAM ( #2843 )
2021-12-01 10:01:15 +01:00
Yuval Brik
1ec3140759
ESP32 Deep Sleep: correct level value ( #2812 )
...
Upon registering for ESP32 deep sleep, DeepSleepComponent::begin_sleep
calculates the level value to wake up on.
As part of PR #2303 , the level was changed to be based on `inverted`
instead of `!inverted`:
Before:
1e8e471dec/esphome/components/deep_sleep/deep_sleep_component.cpp (L76)2b04152482/esphome/components/deep_sleep/deep_sleep_component.cpp (L80)#2644 .
[0]
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html#_CPPv428esp_sleep_enable_ext0_wakeup10gpio_num_ti
2021-12-01 09:38:58 +01:00
Oxan van Leeuwen
cbc1334b8d
Fix compile warning in Tuya automations ( #2837 )
2021-12-01 17:11:21 +13:00
mechanarchy
08cbb97ec9
Allow Git credentials to be loaded from secrets ( #2825 )
2021-12-01 17:10:25 +13:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b32b918936
Button device class ( #2835 )
2021-11-30 16:18:21 +01:00
Carlos Garcia Saura
cd018ad3a5
Burst read for BME280, to reduce spurious spikes ( #2809 )
2021-11-30 16:12:52 +01:00
Adrián Panella
24dfecb6f0
cse7766: add energy sensor ( #2822 )
2021-11-30 16:08:00 +01:00
Keith Burzinski
556d071e7f
Fix 8266 SPI Clock Polarity Setting ( #2836 )
2021-11-30 19:30:45 +13:00
dentra
939fb313df
Tuya text_sensor and raw data usage ( #1812 )
2021-11-30 08:08:52 +13:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
definitio
f50e40e0b8
Fix custom mode_state_topic ( #2827 )
2021-11-29 18:09:09 +01:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Jesse Hills
ea9e75039b
Bump version to 2021.11.4
2021-11-29 10:18:49 +13:00
Conclusio
a5fb036011
Add delay to improve stability ( #2793 )
2021-11-29 10:18:48 +13:00
Dave T
e55506f9db
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 10:18:48 +13:00
Carlos Garcia Saura
50ec1d0445
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
3d5e1d8d91
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
db2128a344
Fix parsing numbers in Anova ( #2816 )
2021-11-29 10:18:48 +13:00
anatoly-savchenkov
cae283dc86
Fixed data type inside fast_random_8() routine ( #2818 )
2021-11-29 08:31:15 +13:00
Conclusio
7afcb0fb04
Add delay to improve stability ( #2793 )
2021-11-29 08:13:42 +13:00
Dave T
10f830c3ef
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 08:12:40 +13:00
Carlos Garcia Saura
7a5c3aa7ed
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 08:06:53 +13:00
Oxan van Leeuwen
2b50406856
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 08:02:10 +13:00
Oxan van Leeuwen
10a2a7e0fc
Fix parsing numbers in Anova ( #2816 )
2021-11-29 08:00:29 +13:00
Jesse Hills
5009b3029f
Bump version to 2021.11.3
2021-11-27 21:13:01 +13:00
Maurice Makaay
57a029189c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-27 21:13:01 +13:00
Maurice Makaay
671d68bc2c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-26 21:25:58 +01:00
Oxan van Leeuwen
5946c37925
Fix usage of deprecated climate method in anova ( #2801 )
2021-11-26 09:16:39 +01:00
Martin
17a37b1de9
Modbus_controller: Add custom command. ( #2680 )
2021-11-26 12:48:52 +13:00
Adrián Panella
e7827a6997
total_daily_energy: allow to disable restore mode ( #2795 )
2021-11-25 22:35:36 +01:00
Oxan van Leeuwen
9681dfb458
Correct constant for dynamic I2S bus in NeoPixelBus ( #2797 )
2021-11-26 09:37:27 +13:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Jesse Hills
7d03823afd
Bump version to 2021.11.2
2021-11-26 09:02:54 +13:00
Oxan van Leeuwen
8e1c9f5042
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:02:54 +13:00
Samuel Sieb
980b7cda8f
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-26 09:02:53 +13:00
Kamil Trzciński
3a72dd5cb6
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-26 09:02:53 +13:00
Dave T
3178243811
Fix frame scaling for animated gifs ( #2750 )
2021-11-26 09:02:53 +13:00
Maurice Makaay
d30e2f2a4f
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-26 09:02:53 +13:00
Oxan van Leeuwen
3637be251e
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:00:49 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Martin
ccfa1e23f0
Add support for sdp8xx ( #2779 )
2021-11-25 11:28:19 +13:00
rsumner
290da8df2d
Fix LEDC resolution calculation on ESP32-C3/S2/S3 ( #2794 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-25 11:22:51 +13:00
Martin
4b1d73791d
remove LEDC_HIGH_SPEED_MODE for C3, S2, S3 ( #2791 )
2021-11-25 08:06:08 +13:00
Jesse Hills
7e8012c1a0
Allow specifying the dashboard bind address ( #2787 )
2021-11-25 07:59:32 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
krunkel
598f5b241f
Remove unnecessary write in AHT10 update ( #2675 )
2021-11-23 09:26:16 +01:00
Paul Monigatti
05fe5db030
Relax the icon validator to allow non-mdi icons ( #2764 )
2021-11-23 09:21:14 +01:00
Andreas Hergert
710096b1c6
Fixed wrong setup of tc9548a ( #2766 )
2021-11-23 09:20:55 +01:00
Dave T
07b882c801
Fix distorted gif frames when resizing ( #2774 )
2021-11-23 09:20:36 +01:00
cvwillegen
3e5331a263
Prettier date time display after time sync ( #2778 )
2021-11-23 09:20:20 +01:00
Oxan van Leeuwen
897277992b
Introduce str_snprintf helper function ( #2780 )
2021-11-23 20:30:49 +13:00
Samuel Sieb
1424091ee5
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-22 12:11:36 +13:00
Kamil Trzciński
61ec16cdfc
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-22 12:09:11 +13:00
Dave T
e5cb5756aa
Fix frame scaling for animated gifs ( #2750 )
2021-11-18 23:20:32 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Martin
448e1690aa
Add retry handler ( #2721 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-18 11:59:40 +13:00
Martin
8267f01ccd
Remove arduino dependency from hm3301 ( #2745 )
2021-11-18 08:03:46 +13:00
Sergey V. DUDANOV
6f9439e1bc
Fix byte order in NEC protocol implementation ( #2534 )
2021-11-17 18:35:50 +01:00
spattinson
06994c0dfc
Change LUT for ttgo t5 2.13inch to improve partial refresh ( #2475 )
2021-11-17 18:28:36 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Jesse Hills
df6730be55
Move to use improv lib from platformio ( #2741 )
2021-11-17 18:23:17 +01:00
Jesse Hills
9c6a475a6e
Bump version to 2021.11.1
2021-11-17 23:31:38 +13:00
Franck Nijhof
8294d10d5b
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:31:38 +13:00
Evgeny
67558bec47
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 23:31:38 +13:00
Franck Nijhof
6c1ef398bb
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:28:31 +13:00
Jesse Hills
58a0b28a39
Bump version to 2021.11.0
2021-11-17 21:58:30 +13:00
Evgeny
0469e19f54
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 09:52:40 +01:00
Jesse Hills
dbcfa7b599
Remove duplicated const data in esp8266 boards ( #2740 )
2021-11-17 16:22:38 +13:00
Jesse Hills
7e495a5e27
Bump version to 2021.11.0b9
2021-11-17 08:00:26 +13:00
rotarykite
c41547fd4a
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 08:00:26 +13:00
Ryan Hoffman
0d47d41c85
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-17 08:00:26 +13:00
rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
cbbafbcca2
Bump version to 2021.11.0b8
2021-11-16 12:53:56 +13:00
Jesse Hills
c75566b374
Fix zeroconf time comparisons ( #2733 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2021-11-16 12:53:56 +13:00
Jesse Hills
f1954df573
Fix zeroconf time comparisons ( #2733 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2021-11-16 12:47:06 +13:00
Jesse Hills
d7432f7c10
Bump version to 2021.11.0b7
2021-11-16 11:05:51 +13:00
Jesse Hills
b0a0a153f3
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:05:51 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
Jesse Hills
0a545a28b9
Bump version to 2021.11.0b6
2021-11-16 09:59:00 +13:00
cvwillegen
b386284180
Ignore secrets.yaml on command line ( #2715 )
2021-11-15 20:06:55 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Oxan van Leeuwen
5404163be0
Clean-up MAC address helpers ( #2713 )
2021-11-15 15:48:16 +01:00
Jesse Hills
687a7e9b2f
Bump version to 2021.11.0b5
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
09e8782318
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
194f922312
Bump version to 2021.11.0b4
2021-11-15 11:03:40 +13:00
Jesse Hills
fea3c48098
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 11:03:39 +13:00
Sergey V. DUDANOV
c2f57baec2
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
f4a140e126
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
ab506b09fe
Restore InterruptLock on wifi-less ESP8266 ( #2712 )
2021-11-15 11:03:39 +13:00
Krzysztof Białek
87e1cdeedb
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-15 11:03:39 +13:00
Jesse Hills
81a36146ef
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-15 11:03:39 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Oxan van Leeuwen
14299bb2cc
Drop unused constants from const.py ( #2718 )
2021-11-15 08:07:58 +13:00
Oxan van Leeuwen
66cebfc992
Restore InterruptLock on wifi-less ESP8266 ( #2712 )
2021-11-15 08:05:11 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
Jesse Hills
f1c5e2ef81
Bump version to 2021.11.0b3
2021-11-12 16:12:31 +13:00
lcavalli
b526155cce
Update device classes for binary sensors ( #2703 )
2021-11-12 16:12:31 +13:00
Jesse Hills
62c3f301e7
Only allow prometheus when using arduino ( #2697 )
2021-11-12 16:12:31 +13:00
Jesse Hills
38cb988809
Remove my.ha links from improv ( #2695 )
2021-11-12 16:12:31 +13:00
lcavalli
7bb7456a8b
Update device classes for binary sensors ( #2703 )
2021-11-12 13:17:10 +13:00
Jesse Hills
0372e12b81
Defines tidy ( #2696 )
...
* Move webserver defines inside arduino block
* Move esp8266 flash define
* Move prometheus define
2021-11-11 10:56:54 +01:00
Jesse Hills
a6873c1520
Only allow prometheus when using arduino ( #2697 )
2021-11-11 10:56:35 +01:00
Jesse Hills
f11220da3a
Remove my.ha links from improv ( #2695 )
2021-11-11 15:15:37 +13:00
Jesse Hills
78026e766f
Bump version to 2021.11.0b2
2021-11-11 12:25:41 +13:00
Oxan van Leeuwen
b4cd8d21a5
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 12:25:41 +13:00
Maurice Makaay
7552893311
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 12:25:41 +13:00
Carlos Garcia Saura
21c896d8f8
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 12:25:40 +13:00
Jesse Hills
4b7fe202ec
Fix template number initial value being NaN ( #2692 )
2021-11-11 12:25:40 +13:00
Oxan van Leeuwen
bb9793d5b7
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 11:53:25 +13:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Carlos Garcia Saura
abf3708cc2
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 11:28:45 +13:00
Jesse Hills
4395d6156d
Fix template number initial value being NaN ( #2692 )
2021-11-10 23:24:48 +01:00
Jesse Hills
8cbb379898
Remove import (not sure how it got there)
2021-11-11 10:35:18 +13:00
Jesse Hills
04ba53c870
Bump version to 2021.12.0-dev
2021-11-11 10:10:05 +13:00
Jesse Hills
b226215593
Bump version to 2021.11.0b1
2021-11-11 10:10:05 +13:00
Jesse Hills
19970729a9
Merge branch 'dev' into bump-2021.11.0b1
2021-11-11 10:10:04 +13:00
anatoly-savchenkov
f310cacd41
[ms5611] Re-implement conversion from ADC readings to sensor values ( #2665 )
2021-11-10 22:01:47 +01:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
99c775d8cb
Introduce encode_value/decode_value() template functions ( #2662 )
2021-11-10 19:44:01 +01:00
Oxan van Leeuwen
4d43396835
Clean-up string sanitation helpers ( #2660 )
2021-11-10 19:42:41 +01:00
TVDLoewe
92321e219a
Max7219digit multiline ( #1622 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:41:04 +13:00
Oxan van Leeuwen
c422b2fb0b
Introduce byteswap helpers ( #2661 )
...
* Backport std::byteswap() in helpers.h
* Introduce convert_big_endian() function
* Use convert_big_endian() in i2c byte swap functions
2021-11-10 19:40:18 +01:00
Otto Winter
8aa72f4c1e
Neopixelbus redo method definitions ( #2616 )
2021-11-11 07:35:31 +13:00
Oxan van Leeuwen
d8e33c5a69
Add repeat action for automations ( #2538 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:30:07 +13:00
Oxan van Leeuwen
15f9677d33
Introduce parse_number() helper function ( #2659 )
2021-11-11 07:15:06 +13:00
Carlos Garcia Saura
219b225ac0
[ESP32 ADC] Add option for raw uncalibrated output ( #2663 )
2021-11-10 19:12:57 +01:00
Oxan van Leeuwen
2ac232e634
Add missing hal.h include in esp32_camera_web_server ( #2689 )
2021-11-10 19:09:10 +01:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Martin
662773b075
modbus_controller: remove hard coded register size ( #2654 )
2021-11-10 16:24:44 +13:00
Carlos Garcia Saura
875b803483
Remove "delay_microseconds_accurate()" and improve systemwide delayMicroseconds() ( #2497 )
2021-11-10 16:22:00 +13:00
Guillermo Ruffino
6e5cfac927
fix rc switch protocol 6 ( #2672 )
2021-11-10 16:15:15 +13:00
Duncan Findlay
97eaf3d4a1
Set up output_switch at priority DATA instead of HARDWARE. ( #2648 )
2021-11-10 16:12:20 +13:00
cvwillegen
366552a969
Remote base add pronto protocol ( #2619 )
2021-11-10 16:11:35 +13:00
Guillermo Ruffino
57b07441a1
fix esp32 rmt receiver item array length ( #2671 )
2021-11-10 13:15:02 +13:00
Kamil Trzciński
fb57ab0add
Add esp32_camera_web_server: to expose mjpg/jpg images ( #2237 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-10 13:10:07 +13:00
Jesse Hills
d6717c0032
Fix dashboard imports for adoption ( #2684 )
2021-11-10 08:38:20 +13:00
ychieux
f72389147d
SSD1306_base: Add support for 64x32 size and fix flip functions ( #2682 )
...
* Add support for SSD1306 OLED display 0.42inch 64x32 and fix a typo in __init__.py preventing flip functions to operate as intended
* convert tab to spaces
* fix typo on filename for __init__.py
2021-11-09 18:47:19 +01:00
Jesse Hills
a509f6ccd2
Fix when package url has no branch/ref ( #2683 )
2021-11-09 17:14:08 +13:00
Martin
add484a2ea
Fix gpio validation for esp32 variants ( #2609 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-09 07:29:28 +13:00
Paul Monigatti
a17a6d5346
Add HA Entity Category support to MQTT ( #2678 )
2021-11-08 10:03:30 +01:00
Maurice Makaay
be9439f10d
Fix for encrypted DSMR regression ( #2679 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-07 20:39:16 -03:00
Maurice Makaay
96a50f5c6b
Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino ( #2677 )
...
* Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino
* Make inclusion of the SPI library unconditional
As suggested by @Oxan. Because the component requires Arduino anyway, there is no need to make the inclusion conditional.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Fix Python lint issue
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-07 19:31:41 +01:00
Jesse Hills
3c0414c420
Add Entity categories for Home Assistant ( #2636 )
2021-11-08 07:24:52 +13:00
Maurice Makaay
b450d4c734
Fix CRC error during DSMR chunked message reading ( #2622 )
...
* DSMR chunk size from 50 to 500
* Still a few CRC errors with 500, upping to 1024.
* Adding timers to measure how long processing DSMR takes
* Handle chunked output from smart meter.
* Cleaning up and commenting the new chunk handling code
* Remove debug code.
* Fixing clang-tidy issues.
* Implementing chunked reading support for encrypted telegrams.
* Remove redundant extra delay for encrypted reader
* Beware not to flush crypted telegram headers
* Use insane data timeout for testing
* Improve logging
* Make clang-tidy happy
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-06 18:52:04 -03:00
Guillermo Ruffino
d536509a63
Allow esp8266 to compile with no wifi ( #2664 )
2021-11-05 10:52:38 +13:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
niklasweber
379c3e98f5
Add restore_mode to rotary_encoder ( #2643 )
2021-11-03 07:32:24 +13:00
Carlos Garcia Saura
d54b4e7c44
Fix for noise in pulse_counter and duty_cycle components ( #2646 )
2021-11-02 08:27:57 +13:00
Jesse Hills
d8b3af3815
Expose webserver_port to the native API ( #2640 )
2021-11-01 09:33:04 +13:00
Otto Winter
2b04152482
Fix deep sleep invert_wakeup mode ( #2644 )
2021-10-31 16:07:06 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Geoffrey Van Landeghem
7eee3cdc7f
convert SCD30 into Component, polls dataready register ( #2308 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-10-31 15:29:22 +13:00
Ed
696643d037
BH1750: Fix a too high default H-res2 mode value ( #2536 )
2021-10-29 11:51:57 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Martin
2350c5054c
use update_interval for sntp synchronization ( #2563 )
...
* use update_interval for sntp synchronization
* revert override of default interval
2021-10-28 20:57:39 +02:00
Jesse Hills
73accf747f
Allow cloning/fetching Github PR branches in external_components ( #2639 )
2021-10-29 07:12:05 +13:00
Alex Iribarren
0d3e6b2c4c
Expose web_server port via the API ( #2467 )
2021-10-28 11:46:55 +13:00
Sean Brogan
2147bcbc29
Remove autoload of xiaomi_ble and ruuvi_ble ( #2617 )
2021-10-28 09:16:12 +13:00
niklasweber
980c2d4cae
Add publish_initial_value option to rotary encoder ( #2503 )
2021-10-28 08:09:37 +13:00
Jesse Hills
c2623a08e3
Fix select.set using lambda ( #2633 )
2021-10-27 08:27:51 +13:00
Jan Čermák
9f625ee7d1
Fix pin number validation for sn74hc595 ( #2621 )
2021-10-26 18:10:45 +02:00
Martin
2f85c27a05
fix modbus output ( #2630 )
2021-10-26 11:30:25 +02:00
Jesse Hills
a01f5f5cf1
Remove power and energy from sensors that are not true power ( #2628 )
2021-10-26 10:55:20 +02:00
Oxan van Leeuwen
87328686a0
Allow setting URL as platform_version ( #2598 )
2021-10-26 10:55:09 +02:00
Martin
81c11ba1f7
relax max entities checking ( #2629 )
2021-10-26 08:53:47 +13:00
Otto Winter
de06a781ff
ESP8266 disable PIO LDF ( #2608 )
2021-10-23 19:44:55 +02:00
Otto Winter
8e77e3c685
Fix glue code missing micros() ( #2623 )
2021-10-23 19:25:53 +02:00
0hax
a687b083ae
Teleinfo ptec ( #2599 )
...
* teleinfo: handle historical mode correctly.
In historical mode, tags like PTEC leads to an issue where we detect a
timestamp wheras this is not possible in historical mode.
PTEC teleinfo tag looks like:
PTEC HP..
Instead of the usual format
IINST1 001 I
This make our data parsing fails.
While at here, make sure we continue parsing other tags even if parsing
one of the tag fails.
Signed-off-by: 0hax <0hax@protonmail.com>
* teleinfo: fix compilation with loglevel set to debug.
Signed-off-by: 0hax <0hax@protonmail.com>
2021-10-23 19:01:23 +02:00
Stefan Agner
b9e5c7eb35
Autodetect flash size ( #2615 )
2021-10-23 13:25:46 +02:00
Otto Winter
1a6a063e04
Move default build path to .esphome directory ( #2586 )
2021-10-23 12:38:57 +02:00
Otto Winter
d85b7a6bd0
Bump platform-espressif8266 from 2.6.2 to 2.6.3 ( #2620 )
2021-10-23 12:37:50 +02:00
Andreas Hergert
1c4700f447
fixed dependency for pca9685 component ( #2614 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Andreas <andreas.hergert@otrs.com>
2021-10-22 18:52:47 +02:00
Andreas Hergert
83400d0417
Bugfix tca9548a and idf refactor anh ( #2612 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
2021-10-22 18:20:57 +02:00
Otto Winter
77a6461c9d
Fix ESP8266 OTA compression only starting framework v2.7.0 ( #2610 )
2021-10-22 17:23:31 +02:00
Otto Winter
6db9d1122f
Fix compiler warnings and update platformio line filter ( #2607 )
2021-10-22 16:52:43 +02:00
Otto Winter
83bef85415
Add owner to all libraries used ( #2604 )
2021-10-22 14:14:14 +02:00
Otto Winter
b5b3914bbf
Re-raise keyboardinterrupt ( #2603 )
2021-10-22 14:14:07 +02:00
Otto Winter
0d90ef94ae
Add OTA upload compression for ESP8266 ( #2601 )
2021-10-22 13:02:55 +02:00
Otto Winter
c08b21b7cd
Bump noise-c from 0.1.3 to 0.1.4 ( #2602 )
2021-10-22 12:12:07 +02:00
Paul Monigatti
be3cb9ef00
Add EntityBase properties to ESP32 Camera ( #2600 )
2021-10-22 12:10:29 +02:00
Oxan van Leeuwen
f7b3f52731
Limit hostnames to 31 characters ( #2531 )
2021-10-22 12:09:47 +02:00
Otto Winter
9220d9fc52
Fix socket connection closed not detected ( #2587 )
2021-10-22 10:46:44 +02:00
Otto Winter
68c8547067
Add IDF support to dallas ( #2578 )
2021-10-21 22:48:28 +02:00
dependabot[bot]
1468acfced
Bump tzlocal from 3.0 to 4.0.1 ( #2553 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-21 22:46:05 +02:00
Jesse Hills
a88c022406
Logging a proper url allows terminals to make it clickable ( #2554 )
2021-10-21 20:53:06 +02:00
Oxan van Leeuwen
07a9cb910f
Fix validation of addressable light IDs ( #2588 )
2021-10-21 20:07:37 +02:00
Oxan van Leeuwen
27d7d7ca69
Fix old-style arduino_version on ESP8266 and with magic values ( #2591 )
2021-10-21 19:56:47 +02:00
Oxan van Leeuwen
c0fc5b48ae
Fix pin/component switchup in SX1509 pin configuration ( #2593 )
2021-10-21 19:55:19 +02:00
Oxan van Leeuwen
8735d3b83e
Fix PlatformIO version for latest Arduino framework ( #2590 )
2021-10-21 18:59:49 +02:00
Otto Winter
eccdef8211
Fix mDNS ESP8266 log not included ( #2589 )
2021-10-21 18:53:08 +02:00
Maurice Makaay
f2ebfe7aef
Add mDNS config dump ( #2576 )
2021-10-21 16:02:28 +02:00
Otto Winter
cac5b356db
ESP32 ADC use factory calibration data ( #2574 )
2021-10-21 16:01:33 +02:00
Otto Winter
c615dc573a
Fix ESP8266 dallas GPIO16 INPUT_PULLUP ( #2581 )
2021-10-21 14:39:36 +02:00
Otto Winter
1caabb6419
Fix ESP8266 OTA adds unnecessary Update library ( #2579 )
2021-10-21 14:20:57 +02:00
Otto Winter
f41f7994a3
Arduino global delay/millis/... symbols workaround ( #2575 )
2021-10-21 14:20:23 +02:00
Otto Winter
e39f314e7a
Fix wifi ble coexistence check ( #2573 )
2021-10-21 12:24:01 +02:00
Otto Winter
7f34561e53
Fix ESP8266 GPIO0 Pullup Validation ( #2572 )
2021-10-21 12:23:37 +02:00
Maurice Makaay
34606b0f1f
Fix MDNS for ESP8266 devices ( #2571 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-21 12:23:21 +02:00
Jesse Hills
56cc31e8e7
Bump version to 2021.10.0b11
2021-10-21 07:32:27 +13:00
Otto Winter
3af297aa76
Revert nextion clang-tidy changes ( #2566 )
2021-10-21 07:32:27 +13:00
Otto Winter
996ec59d28
Move running process log line to debug level ( #2565 )
2021-10-21 07:32:26 +13:00
Jesse Hills
dad244fb7a
A few esp32_ble_server/improv fixes ( #2562 )
2021-10-21 07:31:55 +13:00
Otto Winter
15b5968418
Revert nextion clang-tidy changes ( #2566 )
2021-10-21 07:31:13 +13:00
Otto Winter
64a45dc6a6
Move running process log line to debug level ( #2565 )
2021-10-20 20:15:09 +02:00
Jesse Hills
e4d17e0b15
A few esp32_ble_server/improv fixes ( #2562 )
2021-10-21 06:45:10 +13:00
Carlos Garcia Saura
e79f7ce290
[ESP32] ADC auto-range setting ( #2541 )
2021-10-20 19:44:51 +02:00
Jesse Hills
8456a8cecb
Bump version to 2021.10.0b10
2021-10-20 16:39:24 +13:00
Jesse Hills
9ac365feef
Fix HA addon so it does not have logout button ( #2558 )
2021-10-20 16:38:46 +13:00
Jesse Hills
8b11e5aeb1
Fix HA addon so it does not have logout button ( #2558 )
2021-10-20 13:25:00 +13:00
Jesse Hills
7feffa64f3
Bump version to 2021.10.0b9
2021-10-20 11:00:02 +13:00
Jesse Hills
e10ab1da78
Bump version to 2021.10.0b8
2021-10-20 10:14:30 +13:00
Martin
1b0e60374b
ignore exception when not waiting for a response ( #2552 )
2021-10-20 10:14:30 +13:00
Oxan van Leeuwen
3a760fbb44
Fix ADC pin validation on ESP32-C3 ( #2551 )
2021-10-20 10:14:30 +13:00
Martin
f5441a87e3
ignore exception when not waiting for a response ( #2552 )
2021-10-20 10:10:24 +13:00
Oxan van Leeuwen
5b5ead872b
Fix ADC pin validation on ESP32-C3 ( #2551 )
2021-10-19 12:56:49 +02:00
Jesse Hills
3e9c7f2e9f
Bump version to 2021.10.0b7
2021-10-19 15:47:31 +13:00
Jesse Hills
ecd115851f
Bump version to 2021.10.0b6
2021-10-18 21:26:36 +13:00
Maurice Makaay
4a1e50fed1
OTA firmware MD5 check + password support for esp-idf ( #2507 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-18 21:26:36 +13:00
Jesse Hills
b5734c2b20
Bump version to 2021.10.0b5
2021-10-18 15:31:01 +13:00
Oxan van Leeuwen
723fb7eaac
Autodetect ESP32 variant ( #2530 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-18 15:31:01 +13:00
Jesse Hills
63a9acaa19
Fix Bluetooth setup_priorities ( #2458 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-18 15:31:00 +13:00
Jesse Hills
0524f8c677
Fix const used for IDF recommended version ( #2542 )
2021-10-18 15:31:00 +13:00
Otto Winter
70b62f272e
Only show timestamp for dashboard access logs ( #2540 )
2021-10-18 15:31:00 +13:00
Oxan van Leeuwen
ced11bc707
Autodetect ESP32 variant ( #2530 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-18 13:36:18 +13:00
Jesse Hills
6b9c084162
Fix Bluetooth setup_priorities ( #2458 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-18 09:56:31 +13:00
Jesse Hills
644ce2a26c
Fix const used for IDF recommended version ( #2542 )
2021-10-18 09:55:35 +13:00
Otto Winter
5425e45851
Only show timestamp for dashboard access logs ( #2540 )
2021-10-18 08:01:51 +13:00
Jesse Hills
4b44280d53
Bump version to 2021.10.0b4
2021-10-17 20:34:07 +13:00
Jesse Hills
db3fa1ade7
Allow downloading all bin files from backend in dashboard ( #2514 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-17 20:28:43 +13:00
Oxan van Leeuwen
f83950fd75
Fix bitshift on read in ADE7953 ( #2537 )
2021-10-17 20:28:43 +13:00
Oxan van Leeuwen
4dd1bf920d
Replace framework version_hint with source option ( #2529 )
2021-10-17 20:28:43 +13:00
Martin
98755f3621
Fix bug in register name definition ( #2526 )
2021-10-17 20:28:43 +13:00
Keith Burzinski
c3a8a044b9
Fix Nextion HTTPClient error for ESP32 ( #2524 )
2021-10-17 20:28:42 +13:00
Martin
15b5ea43a7
Add pressure compensation during runtime ( #2493 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-17 20:28:42 +13:00
Jesse Hills
0991ab3543
Allow downloading all bin files from backend in dashboard ( #2514 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-17 19:54:09 +13:00
Oxan van Leeuwen
65d2b37496
Fix bitshift on read in ADE7953 ( #2537 )
2021-10-17 19:53:49 +13:00
Oxan van Leeuwen
94d518a418
Replace framework version_hint with source option ( #2529 )
2021-10-15 22:07:05 +02:00
Carlos Garcia Saura
7cca673902
[esp-idf fix] increase FreeRTOS ticker loop from 100Hz to 1kHz ( #2527 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-15 22:06:49 +02:00
Maurice Makaay
384f8d97d8
OTA firmware MD5 check + password support for esp-idf ( #2507 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-15 22:06:32 +02:00
Oxan van Leeuwen
c82d5d63e3
Move TemplatableValue helper class to automation.h ( #2511 )
2021-10-15 22:05:11 +02:00
dependabot[bot]
653a3d5d11
Bump aioesphomeapi from 9.1.5 to 10.0.0 ( #2508 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-15 22:05:04 +02:00
Tom Matheussen
884b7201de
Continue ethernet setup if hostname fails ( #2430 )
2021-10-15 20:46:58 +02:00
Carlos Garcia Saura
85d2f24447
Clarify statement at the cmd wizard tool, for new users ( #2519 )
...
* Clarify next steps for the install wizard
* Update wizard.py
* Link to relevant section of guide
* Formatting
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-15 19:51:42 +02:00
Dmitriy Lopatko
dc15d1c8ec
use no hold master mode for si7021/htu21d ( #2528 )
2021-10-15 16:52:03 +02:00
Martin
6beb9e568a
Fix bug in register name definition ( #2526 )
2021-10-15 20:27:56 +13:00
Keith Burzinski
7178f10bda
Fix Nextion HTTPClient error for ESP32 ( #2524 )
2021-10-15 20:26:26 +13:00
Jesse Hills
d4e65eb82a
Bump version to 2021.10.0b3
2021-10-15 09:42:44 +13:00
Oxan van Leeuwen
73940bc1bd
Don't define UART_SELECTION_UART2 when UART2 is unavailable ( #2512 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
9b7fb829f9
Fix: Color modes not being correctly used in light partitions ( #2513 )
2021-10-15 09:42:43 +13:00
Dmitriy Lopatko
c51d8c9021
add missing include in sgp30 ( #2517 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
d8a6dfe5ce
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
5f7cef0b06
Disallow using UART2 for logger on ESP-32 variants that lack it ( #2510 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
48ff2ffc68
Fix: Light flash not restoring previous LightState ( #2383 )
...
* Update light state when transformer has finished
* Revert writing direct to output
* Correct handling of zero-length light transformers
* Allow transformers to handle zero-length transitions, and check more boundary conditions when transitioning back to start state
* Removed log.h
* Fixed race condition between LightFlashTransformer.apply() and is_finished()
* clang-format
* Step progress from 0.0f to 1.0f at t=start_time for zero-length transforms to avoid divide-by-zero
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
b3b9ccd314
Fix light state remaining on after turn off with transition ( #2509 )
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
63d6b610b8
Don't define UART_SELECTION_UART2 when UART2 is unavailable ( #2512 )
2021-10-14 11:25:10 +02:00
Martin
8823024509
Add pressure compensation during runtime ( #2493 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-14 11:24:57 +02:00
Paul Monigatti
4896f870f0
Fix: Color modes not being correctly used in light partitions ( #2513 )
2021-10-14 21:04:50 +13:00
Dmitriy Lopatko
7e482901d9
add missing include in sgp30 ( #2517 )
2021-10-14 21:00:53 +13:00
Paul Monigatti
07b309e65d
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-14 20:58:35 +13:00
Oxan van Leeuwen
6bbb5e9b56
Disallow using UART2 for logger on ESP-32 variants that lack it ( #2510 )
2021-10-14 09:21:43 +13:00
Paul Monigatti
867fecd157
Fix: Light flash not restoring previous LightState ( #2383 )
...
* Update light state when transformer has finished
* Revert writing direct to output
* Correct handling of zero-length light transformers
* Allow transformers to handle zero-length transitions, and check more boundary conditions when transitioning back to start state
* Removed log.h
* Fixed race condition between LightFlashTransformer.apply() and is_finished()
* clang-format
* Step progress from 0.0f to 1.0f at t=start_time for zero-length transforms to avoid divide-by-zero
2021-10-13 21:59:52 +02:00
Oxan van Leeuwen
05388d2dfc
Fix light state remaining on after turn off with transition ( #2509 )
2021-10-14 08:53:00 +13:00
Carlos Garcia Saura
859e508392
change millis() to micros() in feed_wdt for 3ms check ( #2492 )
2021-10-13 18:50:27 +02:00
razorback16
534ce11d54
TCS34725 BugFix and GA factor ( #2445 )
...
- Fixed endianness bug on tcs34725 data read
- Fixed lux adjustments based on gain, integration time and GA factor
- Added glass attenuation factor to allow using this sensor behind
semi transparent glass
Co-authored-by: Razorback16 <razorback16@users.noreply.github.com>
2021-10-13 18:45:41 +02:00
Jesse Hills
f57980b069
Bump version to 2021.10.0b2
2021-10-13 22:30:29 +13:00
Jesse Hills
7006aa0d2a
Merge branch 'dev' into beta
2021-10-13 22:11:53 +13:00
Jesse Hills
bb86db869a
Fix bad merge
2021-10-13 22:09:38 +13:00
Jesse Hills
4c4dd23e15
Merge branch 'release' into dev
2021-10-13 22:05:18 +13:00
Jesse Hills
fe5a6847b5
Bump version to 2021.11.0-dev
2021-10-13 16:40:46 +13:00
Jesse Hills
a779592414
Bump version to 2021.10.0b1
2021-10-13 16:40:46 +13:00
Jesse Hills
112215848d
Merge branch 'dev' into bump-2021.10.0b1
2021-10-13 16:40:46 +13:00
Sergio Mayoral Martínez
3dee057826
Add throttle_average sensor filter ( #2485 )
2021-10-13 11:35:30 +13:00
Jesse Hills
4406a08fa7
Allow multiple pn532_spi entries ( #2489 )
2021-10-13 09:06:52 +13:00
Rafael Treviño
c33077bc61
Improves ct_clamp component accuracy ( #2283 )
...
Co-authored-by: Rafa Treviño <rafael.trevino@bbva.com>
2021-10-13 08:42:51 +13:00
Jesse Hills
34db9d9ef2
Add optional timeout for wait_until action ( #2282 )
2021-10-13 08:23:24 +13:00
Rob Deutsch
a3eb2a7ee0
Added heatpumpir support ( #1343 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-13 07:38:19 +13:00
Maurice Makaay
d13134135b
Fix LoadProhibited crash for logger baud_rate 0 ( #2498 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-12 13:51:41 +02:00
Chris Nussbaum
b4f57972fb
Add on_open and on_closed triggers to cover ( #2488 )
2021-10-12 15:39:21 +13:00
Jesse Hills
6a5eb43454
Update Airthings BLE ( #2453 )
2021-10-12 11:56:47 +13:00
Dave T
04ec1c8b56
Consolidate CONF_RAW_DATA_ID to const.py ( #2491 )
2021-10-12 00:14:04 +02:00
niklasweber
d7ad155885
Fix reset on http_request without network connection ( #2474 )
...
* Fix reset problem when http_request is sent without network connection (#2501 )
* Fix format
2021-10-12 00:11:04 +02:00
Jan Čermák
85461a752a
Fix color temperature persistence on CWWW lights ( #2486 )
2021-10-11 23:56:35 +02:00
Dave T
039fbc677d
Replace deprecated COLOR_BLACK constant ( #2487 )
2021-10-11 23:44:05 +02:00
Jesse Hills
2c517e3e8c
Use arduino btStart for arduino framework ( #2457 )
2021-10-11 10:38:45 +13:00
definitio
42739f0b22
Add configuration for climate topics ( #2473 )
2021-10-10 17:55:22 +02:00
definitio
a1f9b0d7f2
Add configuration for cover topics ( #2472 )
2021-10-10 17:54:07 +02:00
Chris Nussbaum
c3b8c84131
Fix below freezing temperature for Inkbird sensors ( #2466 )
2021-10-10 10:53:58 +02:00
Paul Monigatti
471b82f727
EntityBase Refactor ( #2418 )
...
* Renamed Nameable to EntityBase (cpp)
* Renamed NAMEABLE_SCHEMA to ENTITY_BASE_SCHEMA (Python)
* Renamed cg.Nameable to cg.EntityBase (Python)
* Remove redundant use of CONF_NAME from esp32_touch
* Remove redundant use of CONF_NAME from mcp3008
* Updated test
* Moved EntityBase from Component.h and Component.cpp
* Added icon property to EntityBase
* Added CONF_ICON to ENTITY_BASE_SCHEMA and added setup_entity function to cpp_helpers
* Added MQTT component getters for icon and disabled_by_default
* Lint
* Removed icon field from MQTT components
* Code generation now uses setup_entity to setENTITY_BASE_SCHEMA fields
* Removed unused import
* Added cstdint include
* Optimisation: don't set icon if it is empty
* Remove icon from NumberTraits and SelectTraits
* Removed unused import
* Integration and Total Daily Energy sensors now inherit icons from their parents during code generation
* Minor comment correction
* Removed redundant icon-handling code from sensor, switch, and text_sensor
* Update esphome/components/tsl2591/tsl2591.h
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Added icon property to binary sensor, climate, cover, and fan component tests
* Added icons for Binary Sensor, Climate, Cover, Fan, and Light to API
* Consolidated EntityBase fields in MQTT components
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-10 10:37:05 +02:00
Nate Lust
92b85f98e8
Sgp40 fix ( #2462 )
...
* Sample from SGP40 sensor at the appropriate interval
The spg40 sensor must be sampled at 1Hz for the VOC index algorithm
to work correctly. This commit introduces a on device timer to
sample correctly seperately from updating the public state of the
component.
* Add missing configuration values for SGP40
The SGP40 component was not printing all of it's configuration in
dump_config, add in the missing store_baseline value.
* Address review comments
* Format according to clang-tidy
* Attempt 2 at clang tidy
2021-10-10 10:33:04 +02:00
definitio
c092d92d45
Fix cover state ( #2468 )
2021-10-10 10:31:15 +02:00
Ryan Mounce
e514a1fcd4
Use enum for Tuya fan direction datapoint ( #2471 )
...
Fix regression from PR2059. Tested with Arlec DCF5242HA.
2021-10-10 10:28:37 +02:00
davidmonro
a1b28cb36e
atm90e32: make the total_increasing class sensors actually be increasing totals. ( #2459 )
...
Co-authored-by: David Monro <david.monro@anu.edu.au>
2021-10-09 17:44:16 +02:00
Maurice Makaay
3f2d9abfe6
Correct I2C read() return val check in bh1750 component. ( #2465 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-09 10:30:21 +02:00
Otto winter
fc5798fa71
Bump version to 2021.9.3
2021-10-07 22:05:30 +02:00
Otto Winter
95d7ad543f
API encryption switch to libsodium backend ( #2456 )
2021-10-07 22:05:26 +02:00
Jesse Hills
d9b2903d78
Add log line to show if API encryption is being used ( #2450 )
2021-10-07 22:04:55 +02:00
Otto Winter
9bf72ff05f
Re-enable TCP nodelay for ESP32 ( #2390 )
2021-10-07 22:03:05 +02:00
Martin
5461f87ff0
I2c fix ( #2460 )
2021-10-07 21:18:00 +02:00
Otto Winter
1c58b17235
API encryption switch to libsodium backend ( #2456 )
2021-10-06 22:36:12 +02:00
Alex Iribarren
d34a1c3ed6
Add timestamp to ESPHome dashboard/cli logs ( #2455 )
2021-10-07 08:56:07 +13:00
Jesse Hills
22e3bc7cfe
Add id() for restoring global ( #2454 )
2021-10-06 22:35:11 +13:00
Paul Monigatti
955c96731e
Add Safe Mode Restart Switch ( #2437 )
2021-10-06 20:44:48 +13:00
Otto Winter
54a173dbf1
I2C re-introduce very verbose logging ( #2446 )
2021-10-06 11:57:23 +13:00
Alex Iribarren
7bbb5213f3
Only ping once every two seconds ( #2448 )
2021-10-06 11:44:48 +13:00
Jesse Hills
e083d7f4d0
Add log line to show if API encryption is being used ( #2450 )
2021-10-06 11:26:18 +13:00
Martin
a57580b5ab
Fix compilation error ( #2447 )
2021-10-05 17:56:32 +02:00
Paul Monigatti
6ec546a6a4
Improved validation for Addressable Light Partition Segments ( #2439 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-05 12:00:23 +13:00
NMC
877367677b
Add support for Airthing Wave Mini ( #2440 )
2021-10-05 11:56:34 +13:00
Otto Winter
8be4086224
Always upload using esptool ( #2433 )
2021-10-04 16:59:15 +02:00
Otto Winter
871d3b66fb
Fix restoring globals ( #2442 )
2021-10-04 16:15:25 +02:00
Otto Winter
87358e8843
Fix esp32 no longer has Hash internal lib ( #2441 )
2021-10-04 16:14:51 +02:00
Maurice Makaay
5c06cd8eb3
Fix I2C recovery ESP32 esp-idf ( #2438 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-04 12:33:25 +02:00
Stefan Agner
46b4c970d1
Fix socket abstraction for ESP-IDF v4 ( #2434 )
2021-10-03 22:21:45 +02:00
Stefan Agner
49f46a7cdd
Use size_t to fix comparision using RISC-V toolchain ( #2436 )
2021-10-03 21:55:19 +02:00
Stefan Agner
1627dff166
Disable dependency finder on ESP32 ( #2435 )
2021-10-03 21:53:40 +02:00
Maurice Makaay
cee08debff
Hotfix for ESP8266 OTA issue: ERROR Error binary size ( #2432 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-03 16:15:01 +02:00
Otto Winter
912793eddf
Convert time to use tzdata ( #2425 )
2021-10-03 14:10:53 +02:00
Keith Burzinski
eaa5200a35
Thermostat publish state fix ( #2427 )
2021-10-03 14:10:43 +02:00
cvwillegen
a7687c3e17
Add local MAC address to WiFi info ( #2428 )
2021-10-03 13:27:59 +02:00
Maurice Makaay
932e0469f7
Fix ESP32 esp-idf OTA updates ( #2424 )
...
* WIP on separating out the OTA backends.
* Split off the individual OTA backends.
* Cleanup the three backends, split into .h and .cpp.
* After successfull flashing, activate the new boot partition.
* Fix linting issues.
* Minor cleanup
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-02 16:02:01 +02:00
Maurice Makaay
d0dfc94a61
Fix I2C recovery on Arduino ( #2412 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-01 12:53:37 +02:00
Maurice Makaay
5a2984d03a
Fix attach_interrupt(...) for esp-idf framework ( #2416 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-01 10:11:07 +02:00
Maurice Makaay
c89018a431
Option to ignore CRC for EFuse MAC address ( #2399 )
...
* Accept changes as proposed by black.
* Added test and implemented optional correctly.
* Disable PHY RF full calibration (because it calls the breaking MAC retrieval function).
* Disable CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE instead of enable, dummy!
* Rename CONF_IGNORE_EFUSE_MAC_CRC to CONF_ESP32_IGNORE_EFUSE_MAC_CRC.
* Removed unused import.
* Fix ordering of constants.
* Moved all MAC address logic to core helpers.
* Use pretty MAC address for the log.
* Use standard MAC formatter function for debug component.
* Fix clang-formatting.
* Fix clang-formatting.
* Brought wording of comments in line with other function-describing comments.
* Processed code review by @OttoWinter
* Add USE_ESP32_IGNORE_EFUSE_MAC_CRC to defines.h
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-30 18:08:15 +02:00
Oxan van Leeuwen
1031ea4313
Fix line endings normalization ( #2407 )
...
* Strip CRLF line endings from modbus controller files
* Normalize all line endings to LF
2021-09-30 18:07:28 +02:00
Oxan van Leeuwen
5b0fbbaada
Replace std::move() with const references where possible ( #2421 )
...
* Replace std::move() with const references where possible
* Fix formatting
2021-09-30 16:25:08 +02:00
Andy Allsopp
946db3fd50
Add viewport meta tag to web server layout ( #2419 )
...
* Update web_server.cpp
Added viewport meta tag to web_server.cpp in order to better control layout on mobile browsers. Adds 70 characters. Vastly improves accessibility on mobile devices.
* Update web_server.cpp
split line to meet clang format requirement.
* Update web_server.cpp
Reworked line break for clangtidy
2021-09-30 13:03:30 +02:00
WeekendWarrior1
3dfc8d4291
String manipulation filters for text sensors ( #2393 )
...
* initial text sensor filter POC
* fixed verbose logging
* add append, prepend, substitute filters
* add to lower, get to upper working without dummy
* clang lint
* more linting...
* std::move append and prepend filters
* fix verbose filter::input logging
* value.c_str() in input print
* lambda filter verbose log fix
* correct log tag, neaten to upper and to lower
* add on_raw_value automation/trigger
2021-09-29 23:25:06 +02:00
Oxan van Leeuwen
4f5e4f3b86
Move #ifdef to after header include ( #2417 )
...
defines.h needs to be included first.
Fixes esphome/issues#2490 .
2021-09-29 23:21:52 +02:00
Jesse Hills
505d1d78fb
Remove default initializations from tuya cover ( #2415 )
2021-09-29 12:19:19 +13:00
Otto Winter
855c98d815
Fix tuya cover lint checks ( #2414 )
2021-09-28 23:15:52 +02:00
Marek Marczykowski-Górecki
c26ea7e4e0
Tuya: add cover component ( #2279 )
2021-09-29 10:02:13 +13:00
irtimaled
c39ac9edfe
Support HSV-based color support on tuya light ( #2400 )
...
* fix: stop tuya light state getting reset
* fix typo
* Support for HSV color in Tuya
* Clamp formatting
2021-09-28 22:19:17 +02:00
Stephen Tierney
af04f565cf
Add support for SCD4X ( #2217 )
...
* Initial commit
* clang-format fixes
* Update CODEOWNERS
* clang-format fixes
* Fix merge error
* Fix missing return
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-28 22:10:25 +02:00
Paul Monigatti
2b9054d3b2
Initialised ESPPreferenceObject::backend_ to nullptr ( #2411 )
2021-09-28 16:26:46 +02:00
Jesse Hills
a2485a18cb
Bump version to 2021.9.2
2021-09-28 15:41:58 +13:00
Jesse Hills
8ef2ad17b5
Fix lint issues in web_server_base ( #2409 )
2021-09-28 15:41:51 +13:00
Otto Winter
4579f78bf9
Merge pull request from GHSA-48mj-p7x2-5jfm
2021-09-28 15:39:41 +13:00
Sergey V. DUDANOV
1853407645
Midea fix ( #2395 )
2021-09-28 15:36:23 +13:00
Jesse Hills
2234f6aacf
Fix lint issues in web_server_base ( #2409 )
2021-09-28 15:33:30 +13:00
Otto Winter
be965a60eb
Merge pull request from GHSA-48mj-p7x2-5jfm
...
* Move web_server auth to web_server_base
* Fix
* Fix
* Add middleware system
2021-09-28 13:53:38 +13:00
Oxan van Leeuwen
5596751c2c
Add str_sprintf function that returns std::string ( #2408 )
2021-09-28 10:24:55 +13:00
0hax
5624fafb3a
Fix handling of timestamps in Teleinfo component. ( #2392 )
...
* teleinfo: avoid a buffer overflow.
When reading tag or values, data is written to the buffer even if the
size if bigger than the buffer. Add a new 'max_len' argument to
get_field() to avoid this error.
Signed-off-by: 0hax <0hax@protonmail.com>
* teleinfo: read extra timestamp field for some tags.
Some tags has an extra timestamp field that need to be read before the
actual data.
The code is inspired by Jpsy work:
29339c14f9
2021-09-27 22:32:08 +02:00
Daniel Müller
2eb5f89d82
Add cover toggle support ( #1809 )
...
* Add cover toggle support
Step through open/stop/close/stop sequence with every toggle
* Move the cover toggle logic to perform()
* Add clang-tidy CI suggestion
* Implement cover toggle action as cover trait
* Handle toggle correctly if cover fully closed on POR
* Fix CI finding
* Add deprecated warning
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Mueller, Daniel <daniel.mueller@karlstorz.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:31:15 +02:00
Marcos Pérez Ferro
e30f17f64f
Add Current based cover ( #1439 )
...
* Adding first version of current_base cover. No Interlock yet.
* simplifying code
* Implementing malfunction protection
* Adding test
* Fixing too long lines
* Fixing test sensor names
* Adding missing id's in ade7953 tests
* Adding code owners as requested
* Fixing issue setting position when stop reached
* Fixing issue setting position when stop reached
* Black formatting
* Fixing format issues
* Fix for concurrent changes
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:22:45 +02:00
irtimaled
1ba560dc9e
fix: stop tuya light state getting reset ( #2401 )
...
* fix: stop tuya light state getting reset
* fix typo
2021-09-27 21:54:51 +02:00
Maurice Makaay
8c86a18dc6
Add missing include for defines.h. ( #2403 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-27 21:53:47 +02:00
Christian Taedcke
b2d516c70a
ccs811: Skip reading data if it is not available ( #2404 )
...
On bootup the ccs811 reports that no data is available. No error flag
is set in that case. The current implementation ignores this, reads
and publishes the invalid data, which is 0xFDFD for both tvoc and co2
in my case.
This commit fixes this and does not read and publish invalid data.
2021-09-27 21:53:05 +02:00
Otto Winter
45940b0514
Dashboard node import and render in browser ( #2374 )
2021-09-27 10:10:53 -07:00
Otto Winter
97e76d64d6
Re-enable TCP nodelay for ESP32 ( #2390 )
2021-09-27 11:40:28 +02:00
Jesse Hills
756c6721e9
Fix NDEF URI casing ( #2397 )
2021-09-27 11:11:27 +13:00
JonasEr
4c390d9f9f
Extend nfc ndef records with Text ( #2191 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 09:38:08 +13:00
Sergey V. DUDANOV
0d0954d74b
Midea fix ( #2395 )
2021-09-27 09:32:33 +13:00
Martin
7672ba2c8d
Modbus controller ( #1779 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-27 09:27:24 +13:00
WeekendWarrior1
4d28afc153
add fan.cycle_speed action ( #2329 )
2021-09-27 08:32:46 +13:00
irtimaled
7246f42a8e
Tuya rgb support ( #2278 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-26 21:34:06 +13:00
irtimaled
bdcffc7ba9
fix: Setting Tuya string DP value ( #2394 )
2021-09-26 21:27:43 +13:00
rbaron
95a6715b2b
Adds light sensor support for b-parasites ( #2391 )
2021-09-25 13:16:27 +02:00
Otto Winter
5342edf04a
Misc fixes for esp-idf ( #2386 )
2021-09-25 10:05:32 +02:00
Otto Winter
d344b1ca0e
Fix arduino esp32 wifi v2 ( #2389 )
2021-09-25 10:04:57 +02:00
Otto Winter
278863d027
Fix some issues with wifi driver after IDF refactor ( #2387 )
2021-09-25 09:16:32 +02:00
Otto Winter
8503e08ee6
Fix InterruptLock on ESP-IDF ( #2388 )
2021-09-25 09:14:07 +02:00
Otto Winter
aec02afcdc
Fix clang-tidy header filter ( #2385 )
...
* Fix clang-tidy header filter
* Allow private members
* Fix clang-tidy detections
* Run clang-format
* Fix remaining detections
* Fix graph
* Run clang-format
2021-09-24 18:02:28 +02:00
Maurice Makaay
52dd79691b
Read unencrypted DSMR telegrams in chunks ( #2382 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-24 14:15:22 +02:00
Christian Taedcke
963b28181f
Always execute i2c bus recovery on setup ( #2379 )
2021-09-23 20:11:40 +02:00
Christian Taedcke
210a9a4162
Fix esp-idf pinmask bit-shift overflow ( #2380 )
2021-09-23 18:24:29 +02:00
Otto Winter
a27a884191
Add missing MockObj operators ( #2378 )
2021-09-23 11:53:10 +02:00
Paul Monigatti
17dcba8f8a
Fix: Pin flags code generation returning FLAG_NONE ( #2377 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-23 11:19:17 +02:00
Paul Monigatti
ea6a7a22ff
Fix ESP8266 ADC ( #2376 )
2021-09-23 10:45:41 +02:00
Stijn Tintel
5ddba719c5
Fix ir_climate on ESP32-C3 ( #2314 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 20:13:24 +02:00
Otto Winter
b398d826c1
Fix two i2c error code return errors ( #2375 )
2021-09-22 20:07:43 +02:00
Philipp Riederer
edb557f79e
ledc: do not try to write_state to an uninitialized output ( #1732 )
...
Co-authored-by: Philipp Tölke <ptoelke@tecracer.de>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 19:50:19 +02:00
Martin
262d69308d
fix i2c scanning eror for Arduino ( #2364 )
2021-09-22 19:08:42 +02:00
Oxan van Leeuwen
0406e27100
Don't generate IDs with the name of loaded integrations ( #2373 )
2021-09-22 19:07:57 +02:00
Oxan van Leeuwen
ed3ad615d8
Fix compilation due to incompatibility between #1237 and IDF changes ( #2372 )
2021-09-22 14:07:39 +02:00
ZJY
66761ff340
Add SSD1305 support to SSD1306 integration along with few new options ( #1902 )
...
* Add serveral options for SSD1306 integration
* Add SSD1305 support
(SSD1305 is similar to SSD1306, it seems SSD1305 has
brightness and color register but does not have charge pump)
* Add some description when manipulating registers
* Add flip, offset and invert option to get more compatibility
with various display modules
* Fix typo `setup_ssd1036' -> `setup_ssd1306'
* Add SSD1306 brightness validation tip
* Add more description, limit offset range
* Changes according to linter
* Fix test
* Raise error instead of using warning
* Fix wrong logic
* Remove logger
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Remove logging import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-22 13:47:41 +02:00
Gustavo Ambrozio
8bebf138ee
Wifi scan results ( #1605 )
...
* adding a scan results wifi text sensor
* Code comment
* Adding scan results to test
* Removing redundant call
* linting
* Better method to update wifi info
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Getting loop back
At least for now.
* Trying out suggestion again
* Applying cr suggestions
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-09-22 13:44:09 +02:00
wifwucite
fd836e982e
Mqtt topics to support numeric fan speed ( #1859 )
...
* numeric speed added
* when dumping config for MQTT components log a note when skipped due to is_internal
* added new topics to paython code validation/generation
* reformatted with black
* formatting corrected
* use dump_config_ mechanism to skip internal components
* use dump_config_ mechanism to skip internal components
* style issues resolved
* do_dump_config removed
* formatting fixed
* formatting fixed
* Drop parent dump_config() calls
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 13:42:58 +02:00
Trevor North
e32722db70
Allow sloppy datapoint message length ( #1982 )
...
This allows datapoint update messages to be handled even if the overall
message is longer than required (likely that it contains trailing empty
bytes).
The specific type handling will read only the expected data lengths so
we only need to hard bail if we have too little data not too much.
2021-09-22 13:29:05 +02:00
Stephen Tierney
b20760c93c
Add support for LTR390 ( #1505 )
...
* Add support for ltr390
* Fix linting errors
* Fix more linting errors
* Linting fixes continued
* Linting forever
* Another one
* Fix regression and linting
* Fix narrowing conversion
* Add test and bugfix
* Add codeowners
* Update CODEOWNERS
* Update sensor defs
* Reformatted with black
* Fixed device class import
* Update CODEOWNERS
* Update CODEOWNERS
* Adding all config options
As requested https://github.com/esphome/esphome/pull/1505#discussion_r597326897
* Moving test to different config file
test1.yml runs out of memory
* Update according to comments
* Add safety clause to reading modes
* Fix clang-tidy complaint
* Revert change to i2c component
* Fix for changes in dev
* Revert "Revert change to i2c component"
This reverts commit 2810df59e9
2021-09-22 13:24:19 +02:00
Jesse Hills
654e31124e
Correctly invert the float output state ( #2368 )
2021-09-22 22:59:03 +12:00
Stanislav Meduna
8e36e1b92e
ili9341: use larger SPI transfers ( #1628 )
...
The original version uses write_byte to tranfer every byte of
the display buffer which is quite extensive as every byte needs
to be waited for in the SPI driver.
This patch prepares transfers in 64-byte chunks. The result is
a visible faster redraw of the display.
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 12:43:17 +02:00
Tommy van der Vorst
9fe7b08874
Add support for Waveshare 7.5 inch (C) bichromatic display (black-and-white only for now) ( #1844 )
...
* Add support for Waveshare 7.5 inch (B) bichromatic display (black-and-white only for now)
* Use drawing commands specific to bichromatic displays
* Fix inaccurate comment
* Fix merge error
* Formatting
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:39:41 +02:00
Robert Resch
f1364d4af4
Combine code of xiaomi_miscale and xiaomi_miscale2 ( #2266 )
...
* Combine xiaomi_miscale and xiaomi_miscale2
* check if message contains impedance
* auto detect scale version
* remove xiaomi_miscale2
* fix lint errors
* Apply suggestions from code review
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Apply suggestions from code review on old code
* Fix clang-tidy warnings
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:12:55 +02:00
Silvio
ed593544d8
Add support for Daly Smart BMS ( #2156 )
...
* Add support for Daly Smart BMS
* Fix clang-format and python lint
* Fix const declaration
* Add code owner
* Fix malloc with std::vector
* Fix with suggestions
* Revert "Fix with suggestions"
This reverts commit bc618f20cf
2021-09-22 12:03:42 +02:00
Niccolò Maggioni
0929a0f8aa
Discard senseair commands echoes & fix calibration result check ( #2358 )
2021-09-22 11:15:51 +02:00
Paul Monigatti
13b3412b45
Fix Dallas parent not being set ( #2369 )
2021-09-22 11:12:42 +02:00
Maurice Makaay
888e315553
Fix OTA crash during reading of new bin file. ( #2366 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-22 10:37:46 +02:00
WeekendWarrior1
40e0100c1e
add = to default font glpyh list ( #2361 )
2021-09-22 16:57:16 +12:00
Paul Monigatti
c51352d04d
Allow non-addressable lights in light partitions ( #2256 )
2021-09-22 13:59:21 +12:00
Paul Monigatti
c8a8acd46e
Fix ESP8266 preference loading ( #2367 )
2021-09-22 13:55:49 +12:00
Otto Winter
bbac1534a3
Fix ESP8266 preferences not set up ( #2362 )
2021-09-21 21:59:11 +02:00
Maurice Makaay
92a24d52be
Fix OTA password mismatch error. ( #2363 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-21 17:11:58 +02:00
Alex
491f8cc611
Configurable Flash Write Interval ( #2119 )
...
Co-authored-by: Alex <33379584+alexyao2015@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-21 13:47:51 +02:00
Oxan van Leeuwen
71fc61117b
Fix duplicate defines and restore alphabetical order ( #2352 )
2021-09-21 16:52:01 +12:00
Otto Winter
7c884329eb
Fix MDNS not registered ( #2359 )
2021-09-21 16:34:56 +12:00
Martin
bac58bba4d
fixes compilation error in rtttl ( #2357 )
...
Compilation error for millis() and delay() after #2303
2021-09-20 22:13:46 +02:00
Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Oxan van Leeuwen
1e8e471dec
Introduce call_dump_config() indirection ( #2325 )
2021-09-20 11:16:31 +02:00
Oxan van Leeuwen
7452ef23b1
Add ESPHOME_VERSION_CODE define ( #2324 )
2021-09-20 20:16:59 +12:00
Christian Taedcke
9ebe075f9b
Add deep sleep wakeup from touch ( #1238 ) ( #2281 )
2021-09-20 20:12:32 +12:00
Aljaž Srebrnič
3052c64dd7
Add invert_colors option for st7735 ( #2327 )
2021-09-20 20:08:08 +12:00
poptix
81685573e1
Properly calculate negative temperatures in sm300d2 ( #2335 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-20 19:44:18 +12:00
synco
945ed5d3bd
Added graphing component ( #2109 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-20 19:29:47 +12:00
besteru
82eca13d7b
Fix error reporting for DHT bit read loop ( #2344 )
2021-09-20 09:14:44 +02:00
synco
5f21b925da
Calculating the AC only component of the samples ( #1906 )
...
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:12:50 +02:00
Otto Winter
272ceadbb0
Redo docker build system with buildkit+multi-stage and cache pio packages ( #2338 )
2021-09-20 09:07:38 +02:00
Oxan van Leeuwen
8bda8e5393
Clean-up sensor integration ( #2275 )
2021-09-20 14:34:59 +12:00
Jesse Hills
954b8a0cff
Bump version to 2021.9.1
2021-09-20 14:16:57 +12:00
Otto Winter
7c17e72db4
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
d180aee57f
Apply color brightness to addressable light effects ( #2321 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
e3ffecefc0
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
4c61cf153c
Light transition fixes ( #2320 )
2021-09-20 14:16:56 +12:00
Paul Monigatti
c78fb90e2f
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-20 14:16:39 +12:00
Otto Winter
a990898256
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 10:33:10 +12:00
Luca Gugelmann
c60c618204
Fix SPIDevice::write_byte16 to actually take a 16 bit argument ( #2345 )
2021-09-20 09:19:20 +12:00
Stefan Rado
53bd197c44
Add eco mode to tuya climate component ( #1860 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:17:43 +12:00
dependabot[bot]
dbb195691b
Bump pylint from 2.10.2 to 2.11.1 ( #2334 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-19 19:22:28 +02:00
Oxan van Leeuwen
50da630811
Apply color brightness to addressable light effects ( #2321 )
2021-09-19 18:46:26 +02:00
Kamil Trzciński
30eca885c9
Add esp8266_disable_ssl_support: config option ( #2236 )
2021-09-19 18:46:17 +02:00
Oxan van Leeuwen
f76685fccf
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-19 18:31:31 +02:00
Oxan van Leeuwen
68d547595e
Light transition fixes ( #2320 )
2021-09-19 18:31:20 +02:00
Paul Monigatti
64341d1d18
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-19 18:30:41 +02:00
Jesse Hills
0f4a7bf1f5
Bump version to 2021.9.0
2021-09-16 09:12:01 +12:00
Matthew Mazzanti
8f3a739da7
Allow transforms and flashes to not update remote_values ( #2313 )
2021-09-16 05:59:58 +12:00
Oxan van Leeuwen
c6dc8a11e2
Add namespace to all PlatformIO library references ( #2296 )
...
* Remove unnecessary duplication in platformio.ini
* Add namespace to all platformio library references
* Add cmake-build-* to gitignore
They're generated by the CLion add-on for each PlatformIO environment.
Listing them all separately seems nonsensical.
2021-09-15 19:01:31 +02:00
Guillermo Ruffino
d281e59f3a
ac_dimmer increase gate time for robotdyn ( #1708 )
...
* ac_dimmer increate gate time for robotdyn
* add explanation on longer gate enable time
2021-09-15 08:40:52 -03:00
Stefan Rado
2db8c42e1d
Support direct relay state feedback for tuya climate component ( #1668 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-15 20:23:35 +12:00
Jesse Hills
b422a63b2a
Bump version to 2021.9.0b5
2021-09-15 19:01:54 +12:00
Jesse Hills
ad5f2cd748
Start a wifi scan after saving station details ( #2315 )
2021-09-15 19:01:54 +12:00
Maurice Makaay
efae363739
Fix aioesphomeapi API logger with explicit api.port in the YAML. ( #2310 )
2021-09-15 19:01:54 +12:00
Jesse Hills
2d79d21c50
Simple time.sleep in place of threading wait due to upgraded zeroconf ( #2307 )
2021-09-15 19:01:54 +12:00
jsuanet
3b9d126322
Fix unit of measurement fields for DSMR power consumed/delivered fields ( #2304 )
...
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-09-15 19:01:54 +12:00
Jesse Hills
0ea77de98c
Start a wifi scan after saving station details ( #2315 )
2021-09-15 19:00:51 +12:00
Maurice Makaay
19014331d8
Fix aioesphomeapi API logger with explicit api.port in the YAML. ( #2310 )
2021-09-15 08:48:27 +02:00
Jesse Hills
b276ac0588
Simple time.sleep in place of threading wait due to upgraded zeroconf ( #2307 )
2021-09-15 16:39:13 +12:00
Guillermo Ruffino
de33cbd7e7
Dsmr updates ( #2157 )
...
* add option to use check_crc
* ignore newline before ( in parsing
* add gas delivered text for raw sensor
* fix compile issue when not listing any sensor
* make gas_mbus_id configurable
* update dsmr lib for clang
2021-09-14 22:14:49 -03:00
JonasEr
103ba4c696
Bug fix of NFC message & records becoming inaccessible in on_tag lambdas ( #2309 )
2021-09-15 10:06:43 +12:00
jsuanet
5a90b83f63
Fix unit of measurement fields for DSMR power consumed/delivered fields ( #2304 )
...
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-09-15 09:22:45 +12:00
Oxan van Leeuwen
716039e452
Use standard version of make_unique when available ( #2292 )
2021-09-14 14:27:35 +02:00
Jesse Hills
5fad38f65f
Bump version to 2021.9.0b4
2021-09-14 23:07:08 +12:00
Jesse Hills
89f2ea5725
Fix binary strobe ( #2301 )
2021-09-14 23:07:07 +12:00
Jesse Hills
a32ad33b4e
Allow simple hostname for sntp servers ( #2300 )
2021-09-14 23:07:07 +12:00
Otto Winter
a328fff5a7
Fix api noise explicit reject ( #2297 )
2021-09-14 23:07:07 +12:00
Otto Winter
233783c76c
API Noise logging ( #2298 )
2021-09-14 23:07:07 +12:00
Otto Winter
39a18fb358
Bump platformio to 5.2.0 ( #2291 )
2021-09-14 23:07:02 +12:00
Jas Strong
460a144ca8
t6615: tolerate sensor dropping commands ( #2255 )
...
The Amphenol T6615 has a built-in calibration system which means that
the sensor could go away for a couple of seconds to figure itself out.
While this is happening, commands are silently dropped.
This caused the previous version of this code to lock up completely,
since there was no way for the command_ state machine to tick back to
the NONE state.
Instead of just breaking the state machine, which might be harmful on
a multi-core or multi-threaded device, add a timestamp and only break
the lock if it's been more than a second since the command was issued.
The command usually doesn't take more than a few milliseconds to
complete, so this should not affect things unduly.
While we're at it, rewrite the rx side to be more robust against
bytes going missing.
Instead of reading in the data essentially inline, read into a buffer
and process it when enough has been read to make progress.
If data stops coming when we expect it to, or the data is malformed,
have a timeout that sends a new command.
Co-authored-by: jas <jas@asspa.in>
2021-09-14 23:06:13 +12:00
Oxan van Leeuwen
23ead416d5
Suppress excessive warnings about deprecated Fan interfaces ( #2270 )
2021-09-14 23:06:13 +12:00
Oxan van Leeuwen
1b5f11bbee
Only try compat parsing after regular parsing fails ( #2269 )
2021-09-14 23:06:13 +12:00
Jesse Hills
4cc2817fcd
Fix binary strobe ( #2301 )
2021-09-14 22:59:15 +12:00
Jesse Hills
d437cc915c
Allow simple hostname for sntp servers ( #2300 )
2021-09-14 22:40:45 +12:00
Otto Winter
dd3f2f6c7e
Fix api noise explicit reject ( #2297 )
2021-09-14 11:53:49 +02:00
Otto Winter
855112dfc3
API Noise logging ( #2298 )
2021-09-14 09:53:37 +02:00
Otto Winter
b9767bdcbc
Bump platformio to 5.2.0 ( #2291 )
2021-09-13 21:16:13 +02:00
Jesse Hills
91f12a50cf
Bump version to 2021.9.0b3
2021-09-14 07:13:00 +12:00
Otto Winter
e92a9d1d9e
Fix API socket issues ( #2288 )
...
* Fix API socket issues
* Fix compile error against beta
* Format
2021-09-14 07:13:00 +12:00
Oxan van Leeuwen
4eb51ab4d6
Disable automatic usage of SNTP servers from DHCP ( #2273 )
2021-09-14 07:12:59 +12:00
Oxan van Leeuwen
e6b0a0ca2b
Clean-up sensor integration ( #2275 )
2021-09-13 18:58:49 +02:00
Oxan van Leeuwen
924df1e7de
Run clang-tidy against Arduino 3 ( #2146 )
...
* Add macros header with more usable Arduino version defines
* Change Arduino version checking to use our version defines
* Add missing ESP8266 check
* Rename Arduino version macro to ARDUINO_VERSION_CODE
* Upgrade clang-tidy to use Arduino 3
* Fix clang-tidy warnings
* Upgrade NeoPixelBus to upstream 2.6.7
* Use Arduino-version-appropriate API to set redirect flags
* Remove now unnecessary CLANG_TIDY ifdefs
* Add preprocessor hackery to avoid including pgmspace.h
* Bump base image to 4.1.1 and update lint
* Fix nfctag
* Fix make_unique ambiguous
* Fix ignore name
* Fix ambiguous v2
* Remove unused begin
* Cast time_t to prevent issues on platforms where time_t is 32bit
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 18:55:04 +02:00
Otto Winter
ed7983af41
Fix API socket issues ( #2288 )
...
* Fix API socket issues
* Fix compile error against beta
* Format
2021-09-13 18:52:53 +02:00
Oxan van Leeuwen
40c474cd83
Run clang-tidy against ESP32 ( #2147 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 18:11:27 +02:00
Oxan van Leeuwen
133a17d6eb
Add esphal.h include to inkplate6 component ( #2286 )
2021-09-13 16:55:01 +02:00
Oxan van Leeuwen
fe47ddc27a
Convert st7735.h to use LF line endings ( #2287 )
2021-09-13 16:39:35 +02:00
Tercio Filho
aad03f1bf5
Fix issue #2054 . PZEM004T Component doesn't set the module address. ( #1784 )
2021-09-13 15:36:01 +02:00
Otto Winter
a4867a00ea
Activate owning-memory clang-tidy check ( #1891 )
...
* Activate owning-memory clang-tidy check
* Lint
* Lint
* Fix issue with new NfcTag constructor
* Update pointers for number and select
* Add back the NOLINT to display buffer
* Fix merge
* DSMR fixes
* Nextion fixes
* Fix pipsolar
* Fix lwip socket
* Format
* Change socket fix
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-13 11:31:02 +02:00
James Braid
c6109024aa
Fix SM300D2 sensor component routines so they correctly read the sensor output ( #2159 )
2021-09-13 11:23:59 +02:00
Kamil Trzciński
8a2b1d9359
Expose select on Frontend web_server: ( #2245 )
2021-09-13 10:06:28 +02:00
Jas Strong
63a186bdf9
t6615: tolerate sensor dropping commands ( #2255 )
...
The Amphenol T6615 has a built-in calibration system which means that
the sensor could go away for a couple of seconds to figure itself out.
While this is happening, commands are silently dropped.
This caused the previous version of this code to lock up completely,
since there was no way for the command_ state machine to tick back to
the NONE state.
Instead of just breaking the state machine, which might be harmful on
a multi-core or multi-threaded device, add a timestamp and only break
the lock if it's been more than a second since the command was issued.
The command usually doesn't take more than a few milliseconds to
complete, so this should not affect things unduly.
While we're at it, rewrite the rx side to be more robust against
bytes going missing.
Instead of reading in the data essentially inline, read into a buffer
and process it when enough has been read to make progress.
If data stops coming when we expect it to, or the data is malformed,
have a timeout that sends a new command.
Co-authored-by: jas <jas@asspa.in>
2021-09-13 09:54:48 +02:00
Oxan van Leeuwen
d594a6fcbc
Store strings only used for logging in flash ( #2274 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 09:48:52 +02:00
Oxan van Leeuwen
e18dfdd656
Suppress excessive warnings about deprecated Fan interfaces ( #2270 )
2021-09-13 09:39:18 +02:00
Oxan van Leeuwen
3aa107142b
Only try compat parsing after regular parsing fails ( #2269 )
2021-09-13 09:37:11 +02:00
Oxan van Leeuwen
0cd24c629a
Compatibility with clang-tidy v14 ( #2272 )
2021-09-13 09:35:55 +02:00
Oxan van Leeuwen
f31e0532c4
Untangle core headers (part 1) ( #2276 )
2021-09-13 09:33:29 +02:00
irtimaled
f0b6aabc96
Support inverting color temperature on tuya lights ( #2277 )
2021-09-13 09:33:20 +02:00
Oxan van Leeuwen
97a18717e6
Disable automatic usage of SNTP servers from DHCP ( #2273 )
2021-09-13 12:44:39 +12:00
