Commit graph

3371 commits

Author SHA1 Message Date
guillempages
d0dda48932
Add display_type property to DisplayBuffer (#3430)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-03 15:39:04 +12:00
Eric van Blokland
6349b5f654
Added RC6 protocol support (#3514) 2022-06-03 15:37:04 +12:00
Joe
a6ff02a3cf
Refactor clock syncing (#3503)
* Expose `send_local_time()` as public, for use in lambdas.
  This will send the current time configured in `time_id`.
* Add a new `set_clock()` public method, separate from time_id.
  This allows setting the clock manually, without syncing from a Time
  Component. Again this can only be called from ESPHome; i.e.,
  generally from a lambda.
2022-06-03 13:53:20 +12:00
jimtng
4f57bf786b
Add mqtt.on_connect and mqtt.on_disconnect triggers (#3520) 2022-06-03 13:51:50 +12:00
Jesse Hills
6221f6d47d
Implement Media Player and I2S Media player (#3487) 2022-06-02 17:00:17 +12:00
Wolfgang Tremmel
a922efeafa
Change rain intensity sensor string (#3511) 2022-05-31 16:49:18 +12:00
jimtng
5aa42e5e66
Add variable substitutions for !include (#3510) 2022-05-31 16:45:18 +12:00
Joe
708672ec7e
[BedJet] Add configurable heating strategy (#3519)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-31 15:45:01 +12:00
Jan Grewe
d2cefbf224
Allow Prometheus component to export internal components (#3508)
Co-authored-by: Jan Grewe <jan.grewe@flixbus.com>
2022-05-31 07:29:57 +12:00
Michael Davidson
adb7aa6950
Thermostat preset with modes (#3298)
* Rework HOME/AWAY support to being driven via a map of ClimatePreset/ThermostatClimateTargetTempConfig
This opens up to theoretically being able to support other presets (ECO, SLEEP, etc)

* Add support for additional presets
Configuration takes the form;
```
climate:
  platform: preset
  ...
  preset:
    [eco | away | boost | comfort | home | sleep | activity]:
      default_target_temperature_low: 20
      default_target_temperature_high: 24
```

These will be available in the Home Assistant UI and, like the existing Home/Away config will reset the temperature in line with these defaults when selected. The existing away_config/home_config is still respected (although preset->home/preset->away will be applied after them and override them if both styles are specified)

* Add support for specifying MODE, FAN_MODE and SWING_MODE on a preset
When switching presets these will implicitly flow through to the controller. However calls to climate.control which specify any of these will take precedence even when changing the mode (think of the preset version as the default for that preset)

* Add `preset_change` mode trigger
When defined this trigger will fire when the preset for the thermostat has been changed. The intent of this is similar to `auto_mode` - it's not intended to be used to control the preset's state (eg. communicate with the physical thermostat) but instead might be used to update a visual indicator, for instance.

* Apply lint, clang-format, and clang-tidy fixes

* Additional clang-format fixes

* Wrap log related strings in LOG_STR_ARG

* Add support for custom presets
This also changes the configuration syntax to;
```yaml
  preset:
    # Standard preset
    - name: [eco | away | boost | comfort | home | sleep | activity]
      default_target_temperature_low: 20
      ...
    # Custom preset
    - name: My custom preset
      default_target_temperature_low: 18
```

For the end user there is no difference between a custom and built in preset. For developers custom presets are set via `climate.control` `custom_preset` property instead of the `preset`

* Lint/clang-format/clang-tidy fixes

* Additional lint/clang-format/clang-tidy fixes

* Clang-tidy changes

* Sort imports

* Improve configuration validation for presets
- Unify temperature validation across default, away, and preset configuration
- Validate modes for presets have the required actions

* Trigger a refresh after changing internals of the thermostat

* Apply formatting fixes

* Validate mode, fan_mode, and swing_mode on presets

* Add preset temperature validation against visual min/max configuration

* Apply code formatting fixes

* Fix preset temperature validation
2022-05-24 22:44:26 -05:00
Wumpf
cd35ead890
[scd4x] Fix not passing arguments to templatable value for perform_forced_calibration (#3495) 2022-05-24 13:00:06 +12:00
joseph douce
9dc804ee27
Output a true RMS voltage % (#3494) 2022-05-24 12:52:54 +12:00
Martin
a8ceeaa7b0
esp32: fix NVS (#3497) 2022-05-23 20:56:26 +12:00
Sergey Dudanov
7092f7663e
midea: New power_toggle action. Auto-use remote transmitter. (#3496) 2022-05-23 20:51:45 +12:00
Jesse Hills
d9d2edeb08
Fix compile issues on windows (#3491) 2022-05-19 21:21:42 +12:00
Jesse Hills
dda1ddcb26
Add missing import to bedjet (#3490) 2022-05-19 16:23:40 +12:00
Keilin Bickar
f0c890f160
Remove deprecated fan speeds (#3397)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:50:44 +12:00
gazoodle
4f52d43347
add support user-defined modbus functions (#3461) 2022-05-19 12:49:12 +12:00
Martin
0ed7db979b
Add support for SGP41 (#3382)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:47:33 +12:00
myml
9c78049359
feat: esp32-camera add stream event (#3285) 2022-05-19 12:23:50 +12:00
user897943
7882105661
Update bedjet_const.h to remove blank spaces before speed steps, fixes Unknown Error when using climate.set_fan_mode in HA (#3476) 2022-05-19 10:25:42 +12:00
Dave T
c000e1d6dd
Ili9341 8bit indexed mode pt1 (#2490) 2022-05-19 10:23:00 +12:00
Samuel Sieb
9b6b9c1fa2
Retry Tuya init commands (#3482)
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-05-17 20:15:02 +12:00
Martin
609a2ca592
ESP32: Only save to NVS if data was changed (#3479) 2022-05-17 10:59:36 +12:00
[pʲɵs]
6dabf24bf3
MQTT cover: send state even if position is available (#3473) 2022-05-16 15:35:27 +12:00
Jesse Hills
93e2506279
Mark improv_serial and ESP-IDF usb based serial on c3/s2/s3 unsupported (#3477) 2022-05-16 13:05:20 +12:00
Maxim Ocheretianko
f62d5d3b9d
Add Tuya select (#3469) 2022-05-16 07:49:40 +12:00
Maxim Ocheretianko
0665acd190
Tuya status gpio support (#3466) 2022-05-16 07:44:14 +12:00
[pʲɵs]
fea05e9d33
Increase JSON buffer size on overflow (#3475) 2022-05-15 19:53:43 +12:00
dependabot[bot]
7a03c7d56f
Bump pylint from 2.13.8 to 2.13.9 (#3470)
Bumps [pylint](https://github.com/PyCQA/pylint) from 2.13.8 to 2.13.9.
- [Release notes](https://github.com/PyCQA/pylint/releases)
- [Changelog](https://github.com/PyCQA/pylint/blob/main/ChangeLog)
- [Commits](https://github.com/PyCQA/pylint/compare/v2.13.8...v2.13.9)

---
updated-dependencies:
- dependency-name: pylint
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-05-15 19:46:36 +12:00
dependabot[bot]
2dc2aec954
Bump esptool from 3.3 to 3.3.1 (#3468)
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-05-13 13:44:24 +12:00
Dave T
39c6c2417a
Remove duplicate convert_to_8bit_color_ function. (#2469)
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-05-12 22:18:51 +12:00
Brian Kaufman
03d5a0ec1d
Update captive portal canHandle function (#3360) 2022-05-12 16:57:50 +12:00
Michael Davidson
1c873e0034
Make custom_fan and custom_preset templatable as per documentation (#3330) 2022-05-12 16:54:45 +12:00
swifty99
bcb47c306c
Tcs34725 automatic sampling settings for improved dynamics and accuracy (#3258)
Co-authored-by: Daniel Cousens <413395+dcousens@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 16:53:33 +12:00
James Szalay
01c4d3c225
Use heat mode for heat. Move EXT HT to custom presets. (#3437)
* Use heat mode for heat. Move EXT HT to custom presets.

* Fix syntax error.
2022-05-12 15:26:14 +12:00
Niclas Larsson
c2aaae4818
Shelly dimmer: Use unique_ptr to handle the lifetime of stm32_t (#3400)
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 10:26:51 +12:00
Maurice Makaay
3f678e218d
On epoch sync, restore local TZ (#3462)
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-12 09:25:00 +12:00
Jesse Hills
f8a1bd4e79
Bump version to 2022.6.0-dev 2022-05-11 12:50:42 +12:00
Jesse Hills
40ad9f4911
Add deep_sleep.allow YAML action (#3459) 2022-05-11 12:47:50 +12:00
Ruben De Smet
4116caff6a
Implement allow_deep_sleep (#3282) 2022-05-11 11:44:52 +12:00
Otto Winter
0b69f72315
Enable api transport encryption for new projects (#3142)
* Enable api transport encryption for new projects

* Format
2022-05-11 11:38:05 +12:00
Maurice Makaay
c569f5ddcf
Code cleanup fixes for the number component (#3458)
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-11 11:02:49 +12:00
Maurice Makaay
62f9e181e0
Code cleanup fixes for the select component (#3457)
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-11 10:58:28 +12:00
Otto Winter
235a97ea10
Make retry scheduler efficient (#3225) 2022-05-11 07:54:00 +12:00
MFlasskamp
e541ae400c
Esp32c3 deepsleep fix (#3454) 2022-05-10 22:03:59 +12:00
Massimo Cetra
4822abde86
Fix BLE280 setup when the sensor is marked as failed. (#3396) 2022-05-10 22:03:40 +12:00
Jesse Hills
b7e52812f8
Fix tests (#3455) 2022-05-10 22:02:58 +12:00
LuBeDa
69118120d9
added prev_frame for animation (#3427) 2022-05-10 21:56:29 +12:00
Dennis
7cba0c6fb0
Fix cover set position by force pushing position_id datapoint (simila… (#3435) 2022-05-10 21:42:31 +12:00